Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrochemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-resolution Compton spectroscopy using x-ray microcalorimeters

X-ray Compton spectroscopy is one of the few direct probes of the electron momentum distribution of bulk materials in ambient and operando environments. Herein, we report high-resolution inelastic x-ray scattering experiments with high momentum and energy transfer performed at a storage-ring-based high-energy x-ray light source facility using an x-ray transition-edge sensor (TES) microcalorimeter detector. The performance was compared with a silicon drift detector (SDD), an energy-resolving semiconductor detector, and Compton profiles were measured for lithium and cobalt oxide powders relevant to lithium-ion battery research. Spectroscopic analysis of the measured Compton profiles demonstrates the high-sensitivity to the low- Z elements and oxidation states. The line shape analysis of the measured Compton profiles in comparison with computed Hartree–Fock profiles is usually limited by the resolution of the semiconductor detector. We have characterized an x-ray TES microcalorimeter detector for high-resolution Compton scattering experiments using a bending magnet source at the Advanced Photon Source with a double crystal monochromator, providing monochromatic photon energies near 27.5 keV. The momentum resolution below 0.16 atomic units (a.u.) was measured, yielding an improvement of more than a factor of 7 over a state-of-the-art SDD for the same scattering geometry. Furthermore, the lineshapes of narrow valence and broad core electron profiles of sealed lithium metal were clearly resolved using an x-ray TES compared to smeared and broadened lineshapes observed when using the SDD. High-resolution Compton scattering using the energy-resolving area detector shown here presents new opportunities for spatial imaging of electron momentum distributions for a wide class of materials with applications ranging from electrochemistry to condensed matter physics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Stripping away ion hydration shells in electrical double-layer formation: Water networks matter

Significance For centuries the double layer at the solid/electrolyte interface has been a central concept in electrochemistry. Today, it is still crucial for virtually all renewable energy storage and conversion technologies. Here, the double-layer formation is probed by THz spectroscopy with ultrabright synchrotron light as a source. Our results capture the molecular details of double-layer formation at positively/negatively charged Au electrodes for an NaCl electrolyte. We reveal a contrasting response applying positive versus negative bias, which is dictated by the interfacial water network and rationalized by accompanying molecular dynamics simulations and electronic-structure calculations. While Na + is directly attracted toward the negatively charged electrode, stripping of the Cl − hydration shell is observed only at larger potential values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical characterization of the plasma-water interface

Nonthermal atmospheric pressure plasmas generated using noble gases act as gaseous electrodes capable of promoting electrochemical reactions when in contact with aqueous media. Despite overwhelming evidence in favor of the interfacial region between the plasma and solution being a reducing environment, the plasma-liquid interface has not been evaluated from an electrochemical perspective. Herein, we present an electrochemical method to measure the overpotential at the plasma-liquid interface of solutions containing organic redox couples. Negative overpotentials indicate that the interfacial region is a reducing environment, which is consistent with the results of colorimetric assays using redox indicators. The reaction rates are related to the magnitude of the overpotential, as expected from electrochemical kinetic models. The ability to characterize the overpotential of plasma-liquid interfaces adds to the plasma electrochemistry toolkit and contributes to efforts being made to tune gaseous electrodes for the rational control of redox reactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Characterization of plasma in RF jet interacting with water: Thomson scattering versus spectral line broadening

Here, we carry out a detailed characterization of an Ar radiofrequency plasma jet interacting with liquid. The focus of the paper is measurement of the electron density by examining the Stark broadening of hydrogen Balmer α line and Thomson scattering (TS). Supporting diagnostics are done to investigate the channel evolution and movement, and gas temperature. The comparison of the two approaches shows the caveats and the advantages that should gain attention in future applications. In particular, the plasma channel dynamics have a significant impact on the TS signal and may result in physical phenomena being missed due to channel dislocations. The conclusions of the work elucidate the pitfalls for interpreting the results of TS when the discharge is a dynamic filamentary plasma. This work establishes the temporal evolution of the plasma and the gas parameters in a plasma–liquid system employed for investigation of plasma-induced electrodeless electrochemistry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Low-Pressure Electrochemical Synthesis of Complex High-Pressure Superconducting Superhydrides

There is great current interest in multicomponent superhydrides due to their unique quantum properties under pressure. A remarkable example is the ternary superhydride Li 2 MgH 16 computationally identified to have an unprecedented high superconducting critical temperature T c of ~470 K at 250 GPa. However, the very high synthesis pressures required remains a significant hurdle for detailed study and potential applications. In this Letter, we evaluate the feasibility of synthesizing ternary Li-Mg superhydrides by the recently proposed pressure-potential (P 2 ) method that uniquely combines electrochemistry and applied pressure to control synthesis and stability. Furthermore, the results indicate that it is possible to synthesize Li-Mg superhydrides at modest pressures by applying suitable electrode potentials. Using pressure alone, no Li-Mg ternary hydrides are predicted to be thermodynamically stable, but in the presence of electrode potentials, both Li 2 MgH 16 and Li 4 MgH 24 can be stabilized at modest pressures. Three polymorphs are predicted as ground states of Li 2 MgH 16 below 300 GPa, with transitions at 33 and 160 GPa. The highest pressure phase is superconducting, while the two at lower pressures are not. Our findings point out the potentially important role of the P 2 method in controlling phase stability of complex multicomponent superhydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mechano-Electrochemical Interaction in Solid-State Lithium Batteries

A solid-state lithium (Li) battery primarily consists of Li metal anode, solid electrolyte separator, and cathode. The asymmetric volume changes, originating from ion transport and interfacial Li growth during plating, lead to significant stresses in the layered architecture. In this study, we develop a coupled mechanics-electrochemistry formalism for polymer electrolyte based solid-state batteries, in particular, focusing on the stress effect on electrochemical performance. By means of a coupling coefficient, it is found that stress-assisted ion transport in the electrolyte results in a delayed Sand’s time and increased critical current density of unstable electrodeposition, and consequently, alleviates the propensity of dendrite formation. Stress at the Li metal-electrolyte interface affects the electrochemical reaction kinetics, and the influences from the deviatoric stress and hydrostatic pressure vary with Li plating time. In addition, a low restraint stiffness to the layered structure could elastically buffer the volumetric changes and thus reduce the stress during Li plating. This fundamental study provides guidance for the design of solid-state batteries, aimed at stable electrodeposition and mechanical integrity.

25 ENERGY STORAGE↗
DOE OSTI2022

Methods—A Practical Approach to the Reversible Hydrogen Electrode Scale

Accurately quantifying applied potential is important to ensuring the comparability, accuracy, and precision of electrochemical studies. Reference electrodes (REs) enable knowledge/determination of the applied potential at electrodes in electrochemical systems. Ultimately, the choice of RE will depend on the particular requirements of a given electrochemical system, however, we note it is imperative to ensure the accuracy of the RE potential and its proper translation to a standardized scale. In this work, we highlight that while there are many commercially available REs, these must be experimentally calibrated to a reliable and practical standard potential scale, for instance the reversible hydrogen electrode (RHE) scale for aqueous systems. With representative data, we provide streamlined instructions on how to calibrate any RE to the RHE scale. We also provide guidance to mitigate and/or avoid possible electrolyte contamination issues arising from REs. Moreover, we offer a step-by-step guide on how to build a practical RHE RE, which may be a suitable and desirable option in certain applications. Our work emphasizes the need for the continuous adoption of standardized reference potential scales and demonstrates the versatility of the RHE scale, particularly in aqueous electrochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Rapid Electrochemical Carburization of Mild Steel

Next-generation iron production generates iron with 0 wt.% C, in contrast to contemporary blast furnace production of iron with 1 - 5 wt.% C. This makes new iron feedstocks difficult to use as a drop-in replacement in current steelmaking. We report results of an emissions-negative approach of carburizing iron or mild steel using molten salt electrochemistry and CO2. Electrochemical carburization of mild steel via molten carbonate salt electrolyte and CO2 bubbling shows rapid carbide development tunable by applied electric potential. Mild steel rods, serving as the cathode, show pearlite development at the surface after exposure to applied voltage in a LiKCO3 molten carbonate salt bath at 715 degrees C. The thickness of the pearlitic layer could be varied by changing the applied potential, with a strong difference in microstructure observed between an applied potential of -1.8 V and -2.4 V. This rapid carburization has multiple applications for enhancing steel production by upgrading the carbon content of low-carbon feedstocks.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Perspective on Solar-Driven Electrochemical Routes for Sustainable Methanol Production

The transition towards sustainable and renewable energy sources is imperative in mitigating the environmental impacts of escalating global energy consumption. Methanol, with its versatile applications and potential as a clean energy carrier, a precursor chemical, and a valuable commodity, emerges as a promising solution within the realm of renewable energy technologies. This work explores the integration of electrochemistry with solar power to drive efficient methanol production processes, focusing on electrochemical reduction (ECR) of CO 2 and methane oxidation reaction (MOR) as pathways for methanol synthesis. Through detailed analysis and calculations, we evaluate the thermodynamic limits and realistic solar-to-fuel (STF) efficiencies of ECR and MOR. Our investigation encompasses the characterization of multijunction light absorbers, determination of thermoneutral potentials, and assessment of STF efficiencies under varying conditions. We identify the challenges and opportunities inherent in both ECR and MOR pathways, shedding light on catalyst stability, reaction kinetics, and system optimization, thereby providing insights into the prospects and challenges of solar-driven methanol synthesis, offering a pathway towards a cleaner and more sustainable energy future.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Catalytic Bias of NADH-Dependent Reduced Ferredoxin: NADP+ Oxidoreductase (Nfn) and its Relevance to Ethanol Production in Thermoanaerobacterium Saccharolyticum

NADH-dependent reduced ferredoxin: NADP+ oxidoreductase (Nfn) enzyme catalyzes an energy-conserving flavin-based electron bifurcation (FBEB) reaction. In microbial metabolism, Nfn links redox pools of three electron carriers - ferredoxin (Fd), NAD(H), and NADP(H) - through the following FBEB reaction: 2 NADPH + NAD+ + 2 Fdox 2 NADP+ + NADH + 2 Fdred + H+ The forward reaction is termed electron bifurcation, and the reverse reaction is electron confurcation. Catalytic bias describes an enzyme's tendency to favor one direction of a reversible reaction over the other and is expressed as the ratio of activities in the two directions. Thermoanaerobacterium saccharolyticum (Tsac) is a thermophilic, ethanologenic bacterium that ferments hemicellulose to ethanol at yields above 90%. Its Nfn enzyme is known to support ethanol production, presumably by operating in the confurcating direction to balance cellular cofactors, but this has not previously been demonstrated. To investigate the Tsac Nfn further, we heterologously expressed, purified, and reconstituted the proteins NfnS (NfnA), NfnL (NfnB), and the putative partner Fd with iron-sulfur cluster and/or FAD cofactors. Activity assays monitoring the oxidation or reduction of Fd showed that, across pH 5-10, Tsac Nfn is catalytically biased towards the confurcating direction, favoring NADPH generation over NADPH oxidation by at least fivefold. Using protein electrochemistry, we also determined the reduction potentials of the cofactors in NfnL and Fd. These results indicate that the energetic landscape of FBEB in Tsac Nfn is similar to that in an ortholog. However, Tsac Fd has redox properties distinct from previously assayed Fds, suggesting that the identity and redox properties of Fd may help determine the catalytic bias of Nfn. Additionally, we confirmed the standalone ferredoxin: NADP+ oxidoreductase (FNOR) activity of NfnL but found it to be low and likely insignificant for in vivo redox conversion. We also show how the catalytic bias of Nfn integrates with the hydrogen cycling mechanism proposed in Tsac to better explain cofactor balancing for ethanol production. Our work advances the understanding of electron transfer processes within metabolic networks for the generation of valuable bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Space Electrochemical Research and Technology

This document contains the proceedings of NASA's third Space Electrochemical Research and Technology (SERT) Conference, held at the NASA Lewis Research Center on April 9-10, 1991. The objective of the conference was to assess the present status and general thrust of research and development in those areas of electrochemical technology required to enable NASA missions into the next century. The conference provided a forum for the exchange of ideas and opinions of those actively involved in the field, in order to define new opportunities for the application of electrochemical processes in future NASA missions. Papers were presented in three technical areas: the electrochemical interface, the next generation in aerospace batteries and fuel cells, and electrochemistry for nonenergy storage applications. This document contains the abstracts of the papers presented.

Electrochemistry↗
NASA NTRS2015

Atmospheric Condensation in the Mars Phoenix TECP and MET Data

A new calibration function for the humidity sensor in the Thermal and Electrical Conductivity Probe (TECP), a component of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) on the Phoenix Mars mission has been developed. The data is now cast in terms of Frost Point (T(sub f)) and some flight data, taken when the atmosphere is independently known to be saturated, is included in the calibration data set. Combined with data from the Meteorology Mast air temperature sensors, a very sensitive detection of atmospheric saturation becomes possible (Figure 1).

Microscopy↗
DOE OSTI2024

Electrochemical Manipulation and Radiolytic Evaluation of Organic Phase Neptunium

Post for LDRD Annual Poster Session Under envisioned used nuclear fuel reprocessing conditions, neptunium (Np) is present in a mixture of extractable Np(IV)/Np(VI) and inextractable Np(V) species, the distribution of which is dependent on several factors that lead to the unintentional partitioning of Np into various phases and product streams, reducing process and cost efficiency. With this in mind, we tested an innovative approach to precisely control the oxidation state distribution of Np using novel, high surface area, optically transparent, ligand modified tin-doped indium oxide electrodes (LMEs). These proof-of-concept experiments employed a variety of radiation and electrochemistry (echem) techniques to determine: electrode radiation stability; aqueous echem behavior of Np at nITO|P3 electrode surfaces; radiation-induced Np-extractant reaction kinetics; and non-aqueous echem of Np in diethylhexyl butyramide (DEHBA) solutions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Bridging the time scale in exascale computing of chemical systems (Final Technical Report)

This report summarizes the work carried out with support of the United States Department of Energy under Award DE-SC0019441. The theme of this project was to develop and apply methods that allowed for the acceleration of atomistic calculations, particularly in challenging areas such as multiphase systems, electrified interfaces, uncertainty estimation, and applications requiring chemical accuracy, which tend to be applications where simulation time is severely bottlenecked by the computational time requirements. Much of the focus was on the application of emerging machine-learning methodologies, although a wide range of methodologies were employed. This report has two major sections. The first focuses on the methodological advances themselves. Within this part, we report a number of major advances, a few examples of which are described here. We report the first machine-learning scheme for the acceleration of electronically grand-canonical calculations (that is, those applicable to electrochemistry). We report new methods of performing transfer learning, in which physics-based priors can be used to provide predictions, often with uncertainty estimates, of images well outside of training sets; we also offer ways to fine-tune these transfer-learning models. We provide a new systematic means to generate and apply minimal training data sets to very large (10,000’s of atoms) systems, with only small training sets appropriate for electronic structure. We developed new methodologies to integrate surface vibrations into surface adsorption calculations. We made advances to the applicability of diffusion Monte Carlo methods to allow (learned) force prediction, finite-size error correction, and force-free means of searching for transition states. We integrated machine-learned atomistic predictions into mechanism generation codes. Additionally, we released new software including AmpTorch, a modernized version of our original atomistic machine-learning code Amp. The second part of this report focuses on the scientific applications that accompanied, and were often enabled by, the methodological advances described earlier. A few examples follow, but full details are in the individual chapters of the report. For example, we developed a general theory of phonon-induced friction on molecular adsorbates. We showed fundamentally how solvent influences the adsorption and desorption process and how it differs from the processes typically involved at the solid–gas interface, making aqueous-phase and electrocatalysis different from traditional thermocatalysis. We examined how metal–insulator and magnetic transitions can be probed, and accelerated exciton dynamics via Frenkel Hamiltonian parameters. We showed that the nearsighted force-training approach, developed within this project, can predict both the stability and reactivity of large nanoparticles, and can also lead to insights on catalyst coverage on binding energies and entropies. These applied studies, which generally integrated with our method development, allowed us to push forward the theoretical understanding of several reaction classes.

08 HYDROGEN↗
DOE OSTI2020

Basal Plane Hydrogen Evolution Activity from Mixed Metal Nitride MXenes Measured by Scanning Electrochemical Microscopy

2D early transition metal carbide and nitride MXenes have intriguing properties for electrochemical energy storage and electrocatalysis. These properties can be manipulated by modifying the basal plane chemistry. Here, mixed transition metal nitride MXenes, M-Ti 4 N 3 T x (M = V, Cr, Mo, or Mn; T x = O and/or OH), are developed by modifying pristine exfoliated Ti 4 N 3 T x MXene with V, Cr, Mo, and Mn salts using a simple solution-based method. The resulting mixed transition metal nitride MXenes contain 6–51% metal loading (cf. Ti) that exhibit rich electrochemistry including highly tunable hydrogen evolution reaction (HER) electrocatalytic activity in a 0.5 m H 2 SO 4 electrolyte as follows: V-Ti 4 N 3 T x > Cr-Ti 4 N 3 T x > Mo-Ti 4 N 3 T x > Mn-Ti 4 N 3 T x > pristine Ti 4 N 3 T x with overpotentials as low as 330 mV at -10 mA cm -2 with a charge-transfer resistance of 70 O. Scanning electrochemical microscopy (SECM) reveals the electrochemical activity of individual MXene flakes. The SECM data corroborate the bulk HER activity trend for M-Ti 4 N 3 T x as well as provide the first experimental evidence that HER results from catalysis on the MXene basal plane. These electrocatalytic results demonstrate a new pathway to tune the electrochemical properties of MXenes for water splitting and related electrochemical applications.

2D materials↗
DOE OSTI2021

High-Speed Ionic Synaptic Memory Based on 2D Titanium Carbide MXene

Synaptic devices with linear high-speed switching can accelerate learning in artificial neural networks (ANNs) embodied in hardware. Conventional resistive memories however suffer from high write noise and asymmetric conductance tuning, preventing parallel programming of ANN arrays. Electrochemical random-access memories (ECRAMs), where resistive switching occurs by ion insertion into a redox-active channel, aim to address these challenges due to their linear switching and low noise. ECRAMs using 2D materials and metal oxides however suffer from slow ion kinetics, whereas organic ECRAMs enable high-speed operation but face challenges toward on-chip integration due to poor temperature stability of polymers. Here, ECRAMs using 2D titanium carbide (Ti 3 C 2 T x ) MXene that combine the high speed of organics and the integration compatibility of inorganic materials in a single high-performance device are demonstrated. These ECRAMs combine the speed, linearity, write noise, switching energy, and endurance metrics essential for parallel acceleration of ANNs, and importantly, they are stable after heat treatment needed for back-end-of-line integration with Si electronics. The high speed and performance of these ECRAMs introduces MXenes, a large family of 2D carbides and nitrides with more than 30 stoichiometric compositions synthesized to date, as promising candidates for devices operating at the nexus of electrochemistry and electronics.

2D materials↗