Search NASA⌕ Search

SEARCH · Search NASA

Results for “end effector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The LEMMA concept - A new manipulator

The LEMMA is a proposed conceptual design of a remote teleoperator manipulator arm with 6 degrees of freedom, exclusive of the end-effector. The bevel gear arrangement in 4 of the 6 degrees of freedom, together with the concentric-tubular arm configuration, requires a unique and novel drive mechanism. This differential drive assembly, housed in the shoulder, is a self-compensating device and simplifies the matrix solution for the resolved motion rate control system needed to guide the arm in its performances. The article will describe the need for the 6 degrees of freedom as established by the work envelope, the functioning of the differential shoulder drive, the arm and joint configuration, and the anticipated degree of accuracy.

Kersten, L.↗
NASA NTRS1977

Design for a three-fingered hand

This paper describes the construction of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. One of our models was tested and found capable of both these operations.

Crossley, F. R. E.↗
NASA NTRS1977

Shuttle remote manipulator system safety and rescue support capabilities

The Remote Manipulator System (RMS) incorporates a manipulator arm with a payload-handling end effector, an arm positioning mechanism and a control system. The RMS is designed to capture and deploy free-flying payloads up to 4.6 m in diameter and 18.3 m long, weighing 14,515 kg. This paper describes the RMS with attention given to the arm, the supporting subsystems, and safety design features (displays and controls, the mechanical subsystem and operations). Man-in-the-loop simulations for the assurance of RMS and crew safety are described and the use of the RMS for EVA rescue support is considered in detail.

Brown, J. W.↗
NASA NTRS1978

Remote manipulator system flexibility analysis program: Mission planning, mission analysis, and software formulation

A computer program is described for calculating the flexibility coefficients as arm design changes are made for the remote manipulator system. The coefficients obtained are required as input for a second program which reduces the number of payload deployment and retrieval system simulation runs required to simulate the various remote manipulator system maneuvers. The second program calculates end effector flexibility and joint flexibility terms for the torque model of each joint for any arbitrary configurations. The listing of both programs is included in the appendix.

Kumar, L.↗
NASA NTRS1977

Displays for supervisory control of manipulators

The problem of displaying information generated by sensors attached to the terminal device of a remotely controlled manipulator is considered. The sensors under consideration are proximity, force-torque, tactile and slip-page sensors. The paper describes and evaluates several examples that have been implemented in the JPL teleoperator project using audio and graphic displays of information generated by four proximity sensors attached to a manipulator end effector. Design schemes are also discussed related to the display of information generated by a six-dimensional force-torque sensor, a multipoint proportional tactile sensor, and a directional slippage sensor. The paper concludes with a discussion of future integrated displays of visual (TV) and handbased sensor information.

Bejczy, A. K.↗
NASA NTRS1977

Multi-axis hand controller for the shuttle remote manipulator system

The Shuttle Remote Manipulator System, has a articulated arm of 50 ft. length with six motor-driven joints. The basic purpose is to establish physical contact with various space hardware items and maneuver these to the desired position and attitude with respect to the Orbiter, nulling out relative velocities and stabilizing the free-body system by managing residual energies. The normal operating mode is resolved-motion end-point rate control by man-in-loop command. The translational freedoms are defined so that the End Effector (EEFTR) of the arm will move in planes parallel to the principal translational planes of the Orbiter, at a rate commanded by the displacement of the Translation Hand Controller in the corresponding freedom and direction. The rotational freedoms are rate-controlled by the Rotation Hand Controller about pivot axes parallel to Orbiter roll, pitch and yaw, originating at the EEFTR reference point.

Lippay, A. L.↗
NASA NTRS1978

Smart Sensors for Smart Hands

Proximity, force-torque, touch and slippage sensors developed or applied by the JPL Teleoperator Project for remote manipulator control are described, including sensor data handling by computers for display and control. Examples are quoted showing the significance of these sensors for manual or computer control of manipulators. An interesting example is a proximity sensor system implemented for a four-claw JSC end effector and tested at the Shuttle Manipulator Training Facility of JSC. New sensing concepts aimed at simplifying the implementation of 'Smart Sensors for Smart Hands' in the space environment are discussed.

Bejczy, A. K.↗
NASA NTRS1980

Mechanical hand for gripping objects

End effector serves as "hand" for remote manipulator spacecraft system to grasp objects of various sizes. Device has built in flexible wrist joint "cartilage" for increased gripping force without significant strain on mechanical connections.

Clark, K. H.↗
NASA NTRS1980

Microprocessors for real time displays and control of space teleoperators

This paper describes the use of microprocessors for smart displays in a space teleoperator project at the Jet Propulsion Laboratory. The application of microprocessor systems to demonstrate the utility of smart displays for a wrist mounted force/torque sensor and end-effector mounted proximity sensors are discussed as are the laboratory hardware and software configurations. These displays assist the operator in making critical real time decisions. Avenues for future development of these concepts are also presented.

Paine, G.↗
NASA NTRS1981

Space Platform advanced technology study

The development of mechanical systems for space platforms which have universal application regardless of what platform configuration is built is discussed. The design requirements and fabrication of the orbiter berthing systems, berthing latch interface, berthing umbilical interface, and adaptive end effector are described.

Burns, G. C.↗
NASA NTRS1981

Spacecraft automatic umbilical system

An umbilical system design is described that incorporates all the features specified for a power system to payload interconnect capability. A proof-of-concept prototype of the umbilical system was built to determine experimentally the suitability of the threading characteristics of the ram mechanism and to verify freedom from cross threading. It is concluded that Berthing systems that utilize remote manipulator systems (RMS) can be simplified by using RMS targets, closed circuit TV cameras, tie into the RMS control system, and grapple-fixture and end-effector-like capture and secure mechanisms. To effect a remotely controlled umbilical interconnect in proximity with a manned spacecraft and to provide for extravehicular activity backup and maintenance capabilities, 18 different mechanisms are found to be necessary. The weight impact of proving for maintenance capability in a large multiple connector umbilical system was found to be in the order of +60 percent.

Goldin, R. W.↗
NASA NTRS1981

Experimental results with a six-degree-of-freedom force-reflecting hand controller

Control experiments performed using an isotonic joystick connected to a six degree-of-freedom manipulator equipped with a six dimensional force-torque sensor at the base of the manipulator end effector are described. The preliminary control experiments were aimed at the investigation of the human operators' ability to command and control forces in different directions by varying the information conditions and the values of the feedforward and feedback command gains in the bilateral control loop. The main conclusions are: (1) a quantified graphic display of force-torque information can considerably enhance the operator's ability to perform a quantitatively sharp force-torque control, and (2) there seems to be a task dependent optimal combination of the feedforward and feedback command gain values which provide a dynamically smooth and stable bilateral control performance.

Bejczy, A. K.↗
NASA NTRS1982

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Volume 2, Part 2: Appendixes B, C, D and E

The derivation of the equations is presented, the rate control algorithm described, and simulation methodologies summarized. A set of dynamics equations that can be used recursively to calculate forces and torques acting at the joints of an n link manipulator given the manipulator joint rates are derived. The equations are valid for any n link manipulator system with any kind of joints connected in any sequence. The equations of motion for the class of manipulators consisting of n rigid links interconnected by rotary joints are derived. A technique is outlined for reducing the system of equations to eliminate contraint torques. The linearized dynamics equations for an n link manipulator system are derived. The general n link linearized equations are then applied to a two link configuration. The coordinated rate control algorithm used to compute individual joint rates when given end effector rates is described. A short discussion of simulation methodologies is presented.

Lowrie, J. W.↗
NASA NTRS1982

Satellite services system overview

The benefits of a satellite services system and the basic needs of the Space Transportation System to have improved satellite service capability are identified. Specific required servicing equipment are discussed in terms of their technology development status and their operative functions. Concepts include maneuverable television systems, extravehicular maneuvering unit, orbiter exterior lighting, satellite holding and positioning aid, fluid transfer equipment, end effectors for the remote manipulator system, teleoperator maneuvering system, and hand and power tools.

Rysavy, G.↗
NASA NTRS1982

The role of SRMS in satellite servicing

The standard configuration of the shuttle remote manipulator system (RMS) is reviewed and the role of the RMS in satellite servicing is discussed. The RMS tasks include payload deployment, retrieval/berthing, large spacecraft assembly/module exchange, assist astronaut extravehicular servicing, and remote servicing. The potential growth of the RMS to increase its utilization and improve its performance is also addressed. The projected concepts include dual arm operation, a remote mounted RMS, and special purpose end effectors. In particular, a universal service tool system with both remote and manual modes of operation is described.

Fuller, R. B.↗
NASA NTRS1983

Man's role in a remote orbital servicing system

The Remote Orbital Servicing System (ROSS), a focal point for NASA research in automation and robotics, is discussed in terms of the role of man in such a system. In the supervisory control mode, the ROSS operator inputs high-level goals to a strategic (nonreal-time) planner which then passes the plan or series of actions to a tactical (real-time) planner which executes the plan. Using directed control, man makes more specific commands to perform strategic planning with or without the use of the automated strategic planner. Shared computer/manual control will require a multifunction interactive display. At the teleoperator control level, a hand controller is used to command the ROSS manipulator and end effectors.

Pennington, J. E.↗
NASA NTRS1985

Hand-Held Power Clamp

Tool furnishes large pushing or pulling forces. Device includes two clamping blocks, two clamping plates, and a motor-driven linear actuator with selflocking screw shaft. Power clamp exerts opening or closing force at push of switch. Tool approximately 1 m long. Originally designed to secure payload aboard Space Shuttle, operated with one hand to apply opening or closing force of up to 1,000 lb (4,400 N). Clamp has potential applications as end effector for industrial robots and in rescue work to push or pull wreckage with great force.

Clancy, J. P.↗
NASA NTRS1985

Experiments With a Manipulator Sensor System

Force and torque data aid operator. Report describes experiments with system that displays data on forces and torques acting on end effector of remote manipulator. Demonstrated usefulness of display in manipulation tasks with narrow geometric and dynamic tolerances. Such tasks encountered in manufacturing and in operations requiring use of tools.

Bejczy, A. K.↗