Search NASA⌕ Search

SEARCH · Search NASA

Results for “explicit ion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Pathway of D{sup +} in sequential double ionization of D{sub 2} in an intense laser pulse

Details of the pathway for the dissociative ionization process of the ground electronic state of aligned D{sub 2}{sup +} produced from the first ionization of D{sub 2} in a short ({approx}100 fs) and intense (4.0x10{sup 14} W cm{sup -2}) 480 nm laser pulse are analyzed and visualized. The initial vibrational state of D{sub 2}{sup +} comes from the vertical transformation of the ground state of D{sub 2}. The initial wave packet in the ground electronic state of D{sub 2}{sup +} is outgoing through a dissociation-ionization channel accompanied by a strong coupling between the 1s{sigma}{sub g} and 2p{sigma}{sub u} electronic states. We show explicitly that the transition from the coupling states 1s{sigma}{sub g} and 2p{sigma}{sub u} to the ionization state is not a direct transition, but takes place through other intermediate states having some dissociative energy that results in a relatively wide internuclear distribution of the ionization state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Microstructure, Transport, and Mechanics of Compacted Clay Simulated at the 0.1 μm Scale (1400 Smectite Clay Particles) Using a Coarse-Grained Model with Explicit Counterions

Clay-rich geomaterials play a critical role in many subsurface systems. The macroscale properties of these materials (low permeability, high ionic conductivity, high swelling pressure, etc.) are sensitive to molecular-level adsorption and hydration interactions at clay−water interfaces. Efforts to develop multiscale simulation approaches to predict these properties reveal a scale gap between atomistic simulations (typically limited to systems smaller than 10 nm) and continuum-scale models (which use computational grid elements with dimensions ≳ 10 μm). In this study, we present a coarse-grained (CG) framework that partly bridges this gap by simulating compacted smectite clay assemblages with dimensions of 0.1 μm containing 1,400 clay particles across a range of dry densities (1,050 to 1,850 kg·m −3 ) and Na/Ca counterion compositions (Na fraction ranging from 0.2 to 1). The simulated systems, along with their reconstructed binary three-dimensional pore networks, are used to evaluate the microstructure, pore size distribution, tortuosity, ion diffusivity, and swelling pressure of compacted smectite clay. Results show that our approach captures important features of the mesoscale heterogeneity of compacted clays, including tactoid formation, hierarchical porosity, and anisotropic pore networks. Results also reveal how compaction and counterion composition govern emergent behaviors, including dominant pore sizes, directional transport, and electrochemical response. This work highlights the potential of CG simulations to bridge molecular and continuum scales and to advance geotechnical and environmental applications involving clay-rich materials as well as related nanoporous media such as geopolymers and calcium-silicate-hydrate. However, the results also suggest that accurate prediction of certain microstructural and mechanical properties (e.g., swelling pressure) may require even larger-scale systems on the order of 1 μm.

02 PETROLEUM↗

Charge Exchange of Highly Charged Ne and Mg Ions with H and He

Cross sections for single electron capture (SEC), or charge exchange (CX), in collisions of Ne{sup (8–10)+} and Mg{sup (8–12)+} with H and He, are computed using an approximate multichannel Landau–Zener (MCLZ) formalism. Final-state-resolved cross sections for the principal (n), orbital angular momentum (ℓ), and where appropriate, total spin angular momentum (S) quantum numbers are explicitly computed, except for the incident bare ions Ne{sup 10+} and Mg{sup 12+}. In the latter two cases, nℓ-resolution is obtained from analytical ℓ-distribution functions applied to n-resolved MCLZ cross sections. In all cases, the cross sections are computed over the collision energy range 1 meV/u to 50 keV/u with LZ parameters estimated from atomic energies obtained from experiment, theory, or, in the case of high-lying Rydberg levels, estimated with a quantum defect approach. Errors in the energy differences in the adiabatic potentials at the avoided crossing distances give the largest contribution to the uncertainties in the cross sections, which are expected to increase with decreasing cross section magnitude. The energy differences are deduced here with the Olson–Salop–Tauljberg radial coupling model. Proper selection of an ℓ-distribution function for bare ion collisions introduces another level of uncertainty into the results. Comparison is made to existing experimental or theoretical results when available, but such data are absent for most considered collision systems. The nℓS-resolved SEC cross sections are used in an optically thin cascade simulation to predict X-ray spectra and line ratios that will aid in modeling the X-ray emission in environments where CX is an important mechanism. Details on a MCLZ computational package, Stueckelberg, are also provided.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonequilibrium radiative properties in fluctuating plasmas1

A general kinetic model was developed to simulate the radiative properties of nonstationary fluctuating plasmas and characterize the relationship between the nonstationary fluctuation time and the atomic relaxation times. The developed theory is applied to the radiative line emission in the case of instabilities in tokamaks. It is shown by exact time dependent simulations that involve explicitly LSJ-split excited states that the radiation emission in fluctuating plasma can be larger than in the corresponding stationary limits. For regular fluctuations like the sawtooth activity, also the startup phase of sawtooth activity can lead to higher emission compared to the time dependent regular phase. It is demonstrated that the sawtooth crash can be almost exactly followed by resonance line emission like H-like Lyman-alpha and He-like Helium-alpha of, e.g., argon impurity ions, whereas the effective charge state distribution lags seriously behind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Towards an optical potential for rare-earths through coupled channels

The coupled-channel theory is a natural way of treating nonelastic channels, in particular those arising from collective excitations, defined by nuclear deformations. Proper treatment of such excitations is often essential to the accurate description of reaction experimental data. Previous works have applied different models to specific nuclei with the purpose of determining angular-integrated cross sections. In this work, we present an extensive study of the effects of collective couplings and nuclear deformations on integrated cross sections as well as on angular distributions in a consistent manner for neutron-induced reactions on nuclei in the rare-earth region. This specific subset of the nuclide chart was chosen precisely because of a clear static deformation pattern. We analyze the convergence of the coupled-channel calculations regarding the number of states being explicitly coupled. Inspired by the work done by Dietrich et al., a model for deforming the spherical Koning-Delaroche optical potential as function of quadrupole and hexadecupole deformations is also proposed. We demonstrate that the obtained results of calculations for total, elastic and inelastic cross sections, as well as elastic and inelastic angular distributions correspond to a remarkably good agreement with experimental data for scattering energies above around a few MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Molecular Vision - Multimodal, multitask retrieval of molecular structure from measured signatures for reference-free compound identification

We are currently at risk of generating false conclusions based on limited methods to identify small molecules in biological systems and in chemical forensics. By definition, the chemical structures of novel small molecules have not been determined, let alone measured or synthesized. Currently, unambiguous structure determination of small molecules is constrained by the time and effort needed to isolate compounds and perform de novo structure elucidation using laboratory-based methods, significantly extending the time to inform mitigation strategies. To address this gap, we have developed a deep learning approach to directly map molecular structure to experimental signatures. We aim to unify measurement technologies employed in untargeted small molecule identification studies—such as infrared (IR) spectrometry, tandem mass spectrometry (MS/MS), ion mobility spectrometry-derived collision cross section (CCS)—through use of a multimodal, multitask deep learning architecture. Where existing methods require direct generation of information-rich spectra and/or properties, an inherently difficult task, we will simplify molecular signature-based identification by posing the problem as a recognition or retrieval task. The model is thus presented with relevant endpoints – structure and one or more molecular signatures – and need only determine whether they are semantically related. Thus, our approach offers the following advantages over existing techniques: (i) circumvents difficulties associated with direct generation of molecular signatures from structure and structure from signatures; (ii) incorporates multiple molecular signatures simultaneously, as available, to support identification; and (iii) enables rapid computation of structural embeddings toward broad coverage of known chemical space. Taken together, the approach removes the need to explicitly obtain or compute reference spectra, representing a powerful method for compound identification that requires only experimentally observed signatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pedestal main ion particle transport inference through gas puff modulation with experimental source measurements

Abstract Transport in the DIII-D high confinement mode (H-mode) pedestal is investigated through a periodic edge gas puff modulation (GPM) which perturbs the deuterium density and source profiles. By using absolutely calibrated experimental edge ionization profile measurements, radial profiles of diffusion ( D ) and convection ( v ) are calculated into the pedestal region without depending on modeling the edge ionization source. An analytic approach with closed-form expressions for the D and v profiles and a more advanced Bayesian approach show evidence of an inward particle convection on the order of 1 m s −1 extending to normalized poloidal flux ( Ψ N ) of 0.98. Meanwhile, diffusion reaches a minimum value of ( 0.03 ± 0.02 ) m 2 s −1 in the pedestal region. Notably, the Bayesian approach, which utilizes the Aurora 1.5 D forward model inside the IMPRAD OMFIT module, provides radially resolved transport profiles with associated uncertainty without requiring an explicit form for the perturbation to the density profile or source. The combination of experimental ionization measurements and Bayesian inference provides an enhanced robust framework for investigating edge particle transport coefficients to experimentally test transport physics in order to improve predictive capabilities in the tokamak edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Born energy, acid-base equilibrium, structure and interactions of end-grafted weak polyelectrolyte layers

This work addresses the effect of the Born self-energy contribution in the modeling of the structural and thermodynamical properties of weak polyelectrolytes confined to planar and curved surfaces. The theoretical framework is based on a theory that explicitly includes the conformations, size, shape, and charge distribution of all molecular species and considers the acid-base equilibrium of the weak polyelectrolyte. Namely, the degree of charge in the polymers is not imposed but it is a local varying property that results from the minimization of the total free energy. Inclusion of the dielectric properties of the polyelectrolyte is important as the environment of a polymer layer is very different from that in the adjacent aqueous solution. The main effect of the Born energy contribution on the molecular organization of an end-grafted weak polyacid layer is uncharging the weak acid (or basic) groups and consequently decreasing the concentration of mobile ions within the layer. The magnitude of the effect increases with polymer density and, in the case of the average degree of charge, it is qualitatively equivalent to a small shift in the equilibrium constant for the acid-base equilibrium of the weak polyelectrolyte monomers. The degree of charge is established by the competition between electrostatic interactions, the polymer conformational entropy, the excluded volume interactions, the translational entropy of the counterions and the acid-base chemical equilibrium. Consideration of the Born energy introduces an additional energetic penalty to the presence of charged groups in the polyelectrolyte layer, whose effect is mitigated by down-regulating the amount of charge, i.e., by shifting the local-acid base equilibrium towards its uncharged state. Shifting of the local acid-base equilibrium and its effect on the properties of the polyelectrolyte layer, without considering the Born energy, have been theoretically predicted previously. Account of the Born energy leads to systematic, but in general small, corrections to earlier theoretical predictions describing the behavior of weak polyelectrolyte layers. However, polyelectrolyte uncharging results in a decrease in the concentration of counterions and inclusion of the Born Energy can result in a substantial decrease of the counterion concentration. The effect of considering the Born energy contribution is explored for end-grafted weak polyelectrolyte layers by calculating experimental observables which are known to depend on the presence of charges within the polyelectrolyte layer: inclusion of the Born energy contribution leads to a decrease in the capacitance of polyelectrolyte-modified electrodes, a decrease of conductivity of polyelectrolyte-modified nanopores and an increase in the repulsion exerted by a planar polyelectrolyte layer confined by an opposing wall.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical fully differential cross sections for double-charge-transfer collisions

We present a four-body model for double charge transfer, called the four-body double-capture model. This model explicitly treats all four particles in the collision, and we apply it here to fully differential cross sections (FDCSs) for proton+helium collisions. The effects of initial- and final-state electron correlations are studied, as well as the role of the projectile-nucleus interaction. We also present results for proton+helium single capture, as well as single-capture:double-capture ratios of FDCSs.

74 ATOMIC AND MOLECULAR PHYSICS↗

Cation–polymer interactions and local heterogeneity determine the relative order of alkali cation diffusion coefficients in PEGDA hydrogels

Current research efforts are focused on endowing polymer membranes with ion–ion selectivity by incorporating ion–polymer interactions into materials to bias the selective partitioning and or diffusivity of one species over another. However, little is known about the impact of such interactions on the mechanisms of ion transport. In this study, we probe the influence of cation–polymer interactions on cation, anion, and salt diffusivity in a model membrane material, poly(ethylene glycol) diacrylate (PEGDA) by modeling concentrated polyethylene oxide solutions via molecular dynamics simulations. These results are compared to published experimental data for LiCl, NaCl, and KCl diffusion in PEGDA. Experimentally, the order of salt and cation diffusion coefficients for LiCl, NaCl, and KCl deviate from the order in aqueous solutions. Here, simulations identify these deviations to arise from cation–polymer coordination in the membrane. Both the fraction of bound cations and the average binding lifetime increases with decreasing cation hydration free energy (moving down the alkali series), leading to different diffusivity trends in the membrane compared to solution. However, to recover the experimentally observed order of diffusivities cations and salt in our simulations, we needed to incorporate membrane heterogeneity explicitly via a polymer charge scaling procedure. Together, our results indicate that cation–polymer interactions, as well as spatial heterogeneity within the membrane, play a critical role in dictating the observed order of alkali cation and salt diffusion coefficients in membranes.

36 MATERIALS SCIENCE↗

Cumulants of multiple conserved charges and global conservation laws

We analyze the behavior of cumulants of conserved charges in a subvolume of a thermal system with exact global conservation laws by extending a recently developed subensemble acceptance method (SAM) to multiple conserved charges. Explicit expressions for all diagonal and off-diagonal cumulants up to sixth order that relate them to the grand canonical susceptibilities are obtained. The derivation is presented for an arbitrary equation of state with an arbitrary number of different conserved charges. The global conservation effects cancel out in any ratio of two second order cumulants, in any ratio of two third order cumulants, as well as in a ratio of strongly intensive measures Σ and Δ involving any two conserved charges, making all these quantities particularly suitable for theory-to-experiment comparisons in heavy-ion collisions. We also show that the same cancellation occurs in correlators of a conserved charge, like the electric charge, with any non-conserved quantity such as net proton or net kaon number. The main results of the SAM are illustrated in the framework of the hadron resonance gas model. We also elucidate how net-proton and net-Λ fluctuations are affected by conservation of electric charge and strangeness in addition to baryon number.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Summary report on UO 2 thermal conductivity model refinement and assessment studies

Uranium dioxide (UO 2 ) is the most commonly used fuel in light water nuclear reactors and thermal conductivity controls the removal of heat produced by fission, therefore, governing fuel temperature during normal and accident conditions. The use of fuel performance codes by the industry to predict operational behavior is widespread. A primary source of uncertainty in these codes is thermal conductivity, and optimized fuel utilization may be possible if existing empirical models were replaced with models that incorporate explicit thermal conductivity degradation mechanisms during fuel burn-up. This approach is able to represent the degradation of thermal conductivity due to each individual defect type, rather than the overall burn-up measure typically used which is not an accurate representation of the chemical or microstructure state of the fuel that actually governs thermal conductivity and other properties. To generate a mechanistic thermal conductivity model, molecular dynamics (MD) simulations of UO 2 thermal conductivity including representative uranium and oxygen defects and fission products are carried out. These calculations employ a standard Buckingham type interatomic potential and a potential that combines the many-body embedded atom method potential with Morse-Buckingham pair potentials. Potential parameters for UO 2+x and ZrO 2 are developed for the latter potential. Physical insights from the resonant phonon-spin scattering mechanism due to spins on the magnetic uranium ions have been introduced into the treatment of the MD results, with the corresponding relaxation time derived from existing experimental data. High defect scattering is predicted for Xe atoms compared to that of La and Zr ions. Uranium defects reduce the thermal conductivity more than oxygen defects. For each defect and fission product, scattering parameters are derived for application in both a Callaway model and the corresponding high-temperature model typically used in fuel performance codes. The model is validated by comparison to low-temperature experimental measurements on single crystal hyper-stoichiometric UO 2+x samples and high-temperature literature data. Ongoing works include investigation of the effect of phase separation to UO 2 +U 4 O 9 on the low temperature thermal conductivity of UO 2+x , and modeling of thermal conductivity using the Green-Kubo method. Ultimately, this work will enable more accurate fuel performance simulations as well as extension to new fuel types and operating conditions, all of which improve the fuel economics of nuclear energy and maintain high fuel reliability and safety.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Gas-phase reaction between calcium monocation and fluoromethane: Analysis of the potential energy hypersurface and kinetics calculations

The gas-phase reaction between calcium monocation and fluoromethane: Ca{sup +}+CH{sub 3}F{yields}CaF{sup +}+CH{sub 3} was theoretically analyzed. The potential energy hypersurface was explored by using density functional theory methodology with different functionals and Pople's, Dunning's, Ahlrichs', and Stuttgart-Dresden basis sets. Kinetics calculations (energy and total angular momentum resolved microcanonical variational/conventional theory) were accomplished. The theoretically predicted range for the global kinetic rate constant values at 295 K (7.2x10{sup -11}-5.9x10{sup -10} cm{sup 3} molecule{sup -1} s{sup -1}) agrees reasonably well with the experimental value at the same temperature [(2.6{+-}0.8)x10{sup -10} cm{sup 3} molecule{sup -1} s{sup -1}]. Explicit consideration of a two transition state model, where the formation of a weakly bounded prereactive complex is preceded by an outer transition state (entrance channel) and followed by an inner transition state connecting with a second intermediate that finally leads to products, is mandatory. Experimental observations on the correlation, or lack of correlation, between reaction rate constants and second ionization energies of the metal might well be rationalized in terms of this two transition state model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular dynamics simulation of thermal transport in UO 2 containing uranium, oxygen, and fission-product defects

Uranium dioxide (UO 2 ) is the most commonly used fuel in light-water nuclear reactors and thermal conductivity controls the removal of heat produced by fission, thereby governing fuel temperature during normal and accident conditions. The use of fuel performance codes by the industry to predict operational behavior is widespread. A primary source of uncertainty in these codes is thermal conductivity, and optimized fuel utilization may be possible if existing empirical models are replaced with models that incorporate explicit thermal-conductivity-degradation mechanisms during fuel burn up. This approach is able to represent the degradation of thermal conductivity due to each individual defect type, rather than the overall burn-up measure typically used, which is not an accurate representation of the chemical or microstructure state of the fuel that actually governs thermal conductivity and other properties. To generate a mechanistic thermal conductivity model, molecular dynamics (MD) simulations of UO 2 thermal conductivity including representative uranium and oxygen defects and fission products are carried out. These calculations employ a standard Buckingham-type interatomic potential and a potential that combines the many-body embedded-atom-method potential with Morse-Buckingham pair potentials. Potential parameters for UO 2+x and ZrO 2 are developed for the latter potential. Physical insights from the resonant phonon-spin-scattering mechanism due to spins on the magnetic uranium ions are introduced into the treatment of the MD results, with the corresponding relaxation time derived from existing experimental data. High defect scattering is predicted for Xe atoms compared to that of La and Zr ions. Uranium defects reduce the thermal conductivity more than oxygen defects. For each defect and fission product, scattering parameters are derived for application in both a Callaway model and the corresponding high-temperature model typically used in fuel-performance codes. The model is validated by comparison to low-temperature experimental measurements on single-crystal hyperstoichiometric UO 2+x samples and high-temperature literature data. Furthermore, this work will enable more accurate fuel-performance simulations and will extend to new fuel types and operating conditions, all of which improve the fuel economics of nuclear energy and maintain high fuel reliability and safety.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Exploring non-adiabaticity to CO reduction reaction through ab initio molecular dynamics simulation

Non-adiabatic chemical reaction refers to the electronic excitation during reactions. This effect cannot be modeled by the ground-state Born-Oppenheimer molecular dynamics (BO-MD), where the electronic structure is at the ground state for every step of ions' movement. Although the non-adiabatic effect has been explored extensively in gas phase reactions, its role in electrochemical reactions, such as water splitting and CO 2 reduction, in electrolyte has been rarely explored. On the other hand, electrochemical reactions usually involve electron transport; thus, a non-adiabatic process can naturally play a significant role. In this work, using one-step CO 2 reduction as an example, we investigated the role of the non-adiabatic effect in the reaction. The reaction barriers were computed by adiabatic BO-MD and non-adiabatic real-time time dependent density functional theory (rt-TDDFT). We found that by including the non-adiabatic effect, rt-TDDFT could increase the reaction barrier up to 6% compared to the BO-MD calculated barrier when the solvent model is used to represent water. Simulations were carried out using explicit water molecules around the reaction site under different overpotentials, and similar non-adiabatic effects were found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical relativistic ideal hydrodynamical solutions in (1+3)D with longitudinal and transverse flows

A new method for solving relativistic ideal hydrodynamics in (1+3)D is developed. Longitudinal and transverse radial flows are explicitly embedded into the ansatz for the velocity field and the hydrodynamic equations are reduced to a single equation for the transverse velocity field only, which is analytically more tractable as compared to the full hydrodynamic equations. As an application we use the method to find analytically all possible solutions whose transverse velocity fields have power dependence on the proper time and transverse radius. The possible applications to relativistic heavy ion collisions and possible generalizations of the method are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Surface-Mediated Solvent Decomposition in Li–Air Batteries: Impact of Peroxide and Superoxide Surface Terminations

A viable Li/O 2 battery will require the development of stable electrolytes that do not continuously decompose during cell operation. In some recent experiments it is suggested that reactions occurring at the interface between the liquid electrolyte and the solid lithium peroxide (Li 2 O 2 ) discharge phase are a major contributor to these instabilities. To clarify the mechanisms associated with these reactions, a variety of atomistic simulation techniques, classical Monte Carlo, van der Waals-augmented density functional theory, ab initio molecular dynamics, and various solvation models, are used to study the initial decomposition of the common electrolyte solvent, dimethoxyethane (DME), on surfaces of Li 2 O 2 . Comparisons are made between the two predominant Li 2 O 2 surface charge states by calculating decomposition pathways on peroxide-terminated (O 2 2– ) and superoxide-terminated (O 2 1– ) facets. For both terminations, DME decomposition proceeds exothermically via a two-step process comprised of hydrogen abstraction (H-abstraction) followed by nucleophilic attack. In the first step, abstracted H dissociates a surface O 2 dimer, and combines with a dissociated oxygen to form a hydroxide ion (OH – ). In the remaining surface oxygen then attacks the DME, resulting in a DME fragment that is strongly bound to the Li 2 O 2 surface. DME decomposition is predicted to be more exothermic on the peroxide facet; nevertheless, the rate of DME decomposition is faster on the superoxide termination. The impact of solvation (explicit vs implicit) and an applied electric field on the reaction energetics are investigated. Finally, our calculations suggest that surface-mediated electrolyte decomposition should out-pace liquid-phase processes such as solvent auto-oxidation by dissolved O 2 .

25 ENERGY STORAGE↗

Diversity-oriented synthesis of polymer membranes with ion solvation cages

Microporous polymers feature shape-persistent free volume elements (FVEs), which are permeated by small molecules and ions when used as membranes for chemical separations, water purification, fuel cells, and batteries. It remains a significant challenge to identify FVEs with analyte specificity, due to difficulties in generating microporous polymer libraries with sufficient diversity for screening their properties. Here, we describe a diversity-oriented synthetic (DOS) strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions (Li + ). Furthermore, key elements of our strategy included diversification of bis(catechol)-type monomers via multi-component Mannich reactions to introduce Li+-coordinating functionality within individual FVEs, topology-enforcing polymerizations for generating macromolecular skeletal diversity for networking FVEs into different pore architectures, and several classes of on-polymer reactions for diversifying pore geometries and dielectric properties. Lead candidate polymer membranes featuring explicit ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome.4 These advantages are tied to enhanced Li + partitioning from the electrolyte when the cages are present, higher diffusion barriers for anions within the pores, and network-enforced restrictions on the number of solvent molecules bound to Li+ by comparison to the bulk electrolyte, which reduces the effective mass of the working ion. Such membranes show promise as anode-stabilizing interlayers in high-voltage lithium-metal batteries for electric mobility.

42 ENGINEERING↗