Search NASA⌕ Search

SEARCH · Search NASA

Results for “fast ion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Stably trapped proton limits for Jupiter

A general introduction to pitch-angle diffusion for Earth and Jupiter magnetospheres is given. The instabilities which might limit the trapped fluxes in the earth magnetosphere are identified as the interchange or ballooning mode, electrostatic loss cone modes, and electromagnetic ion cyclotron wave. The instability theory of the ion cyclotron wave is discussed. This wave can be unstable only if protons can be in cyclotron resonance with the wave. The instability growth rate is proportional to the cyclotron frequency, the fractional number density of fast particles, and the anisotropy of the fast particle distribution. The critical proton energy is the lowest energy for which the stably trapped limit applies, and is calculated to be 150 MeV at L = 2 and for 10 ion pairs/cu cm. Particles above the critical threshold energy are considered and their stability limit is approximately 3 x 10 to the 10th power/sq cm/sec divided by L to the 4th power.

Kennel, C.↗
NASA NTRS1993

Polar wind ion dynamics in the magnetotail

The circulation of polar wind ions from the high-latitude ionosphere to the plasma sheet is investigated. Single-particle trajectory simulations for the geomagnetic tail show, in addition to the breaking of adiabaticity, the possible creation of new high-altitude mirror points. This trajectory feature results from an intense parallel deceleration imparted by the magnetic field rotation during fast ExB transport. This centrifugal deceleration yields a critical parallel velocity which depends on the magnitude of the convection electric field and below which ions remain trapped inside the neutral sheet.

Delcourt, D. C.↗
NASA NTRS1999

FAST Observations of Lower Hybrid Waves in the Cusp Regions

The Fast Auroral Snapshot (FAST) spacecraft has encountered the Earth's cusp regions on numerous occasions during its first few years of operations. Intense plasma waves are consistent features of these cusp encounters which are characterized by localized keV dispersed ion "Injections". Emissions observed near the lower hybrid frequency are frequently, though not always, observed in conjunction with the precipitating cusp ions. The waves are clearly electrostatic and often exhibit a bifuncation in frequency about the lower hybrid frequency. In some cases, numerous ion Bernstein waves are present, separated in frequency at harmonics near the local proton cyclotron frequency. An analysis of the measurements of the electric field components of the plasma waves gathered with FAST's spaced receivers (or interferometers) reveals their short wavelength characteristics. We examine several examples of such waves in detail in order to understand their growth mechanisms and to relate them with the cusp energetic particle populations.

Pfaff, R. F.↗
NASA NTRS2018

New O+CO2 Scattering Cross Sections and Their Impact on Photochemical Atmospheric Escape of Oxygen from Mars

Dissociative recombination of O2+ and CO2+ molecular ions in the upper atmosphere of Mars is a major source of suprathermal (hot) oxygen atoms. A significant fraction of hot O atoms are sufficiently fast to overcome Mars' gravitational potential and escape to space. This mechanism is known as photochemical escape (PE) and found to be one of the major escape mechanisms presently active on Mars. The Mars Atmosphere and Volatile Evolution Mission (MAVEN) can constrain the PE rate from measurements of electron temperature and density and ion temperature and density. Escape probabilities of hot O can then be constructed from in-situ neutral densities and escaping O flux loss due to collisions with atmospheric background gases. Due to CO2 abundance in the upper atmosphere, O+CO2 scattering is the most important sink of the escaping hot O flux that strongly affects estimates of total atomic oxygen escape rate obtained from MAVEN data, as outlined above. New O+CO2 elastic and inelastic cross sections were constructed from first principles for collision energies from 0.01-5 eV. O(3P)+CO2 collisions were described using new 4D electronic potential energy surfaces (PESs) for restricted geometries. Three lowest triplet states of CO2 were considered for symmetric, bending, and asymmetric vibrational modes. The cross sections were determined from close-coupling calculations performed on individual surfaces using vibrating rotor approximations for CO2 molecule. Differential and momentum transfer cross sections, of use in energy transfer atmospheric models, were also constructed. The obtained cross sections are in excellent agreement with published results. Our new elastic cross sections are significantly smaller than assumed in earlier atmospheric escape models, resulting in larger photochemical escape rate of O from Mars, as estimated from a 1D escape model. Our results agree well with estimated hot O flux (about 9 x 10(sup 25) s(sup -1)) derived from altitude profiles of 130.4 nm O emission measured up to ~4,000 km by the Imaging Ultraviolet Spectrograph on MAVEN orbiter.

Atmospheric↗
NASA NTRS1978

Excitation of low frequency waves by streaming ions via anomalous cyclotron resonance

The effect of a small population of streaming ions on low-frequency waves with frequencies below the ion cyclotron frequency is analyzed for three modes of interest: Alfven waves, magnetosonic waves, and ion-cyclotron waves. The instability mechanism is the anomalous cyclotron resonance of the waves with the streaming ions. Conditions for excitation of the three types of waves are derived and expressions for the growth rates are obtained. Excitation of Alfven waves is possible even if the ratio of the densities of the streaming ions to the thermal ions is very small. For magnetosonic waves, excitation can easily occur if waves are propagating parallel or nearly parallel to the ambient magnetic field. As for ion-cyclotron waves, it is found that for the ion-whistler branch the excitation is suppressed over a broader range of wave frequencies than for the fast magnetosonic branch.

Wu, C. S.↗
NASA NTRS1991

Reflectance spectra of Fe(2+)-Mg(2+) disordered pyroxenes: Implications to remote-sensed spectra of planetary surfaces

The reflectance spectra of Fe(2+)-Mg(2+) disordered orthopyroxenes are relevant to surfaces of terrestrial planets onto which basaltic magma has been extruded. If cooling rates of basalt lava flows were fast, equilibrium iron intersite partitioning may not have been achieved so that abnormal enrichments of Fe(2+) ions in M1 sites would occur. The two intense pyroxene Fe(2+) site CF bands in the 1 micron and 2 micron regions would continue to dominate the the reflectance spectra so that the pyroxene composition and structure type would be readily identified in telescopic spectral profiles. However, abnormal intensification of the Fe(2+)/M1 site CF band at 1.20 microns could lead to the false identification of olivine in remote sensed spectra because in pyroxene-olivine mixtures the inflection around 1.20 microns is the only spectral feature for detecting the presence of olivine. The identification of iron-bearing plagioclase feldspars, too, would be obscured by the pyroxene Fe(2+)/M1 site CF band at 1.20 microns. Such interference would be a major problem if in situ reflectance spectra could be measured on the surface of Venus where ambient temperatures are as high as 475 C. Disordering of Fe(2+) and Mg(2+) ions comparable to that in the orthopyroxenes used in this spectral chemical study might be expected in low Ca pyroxenes occurring on the Venusian surface. Researchers conclude that Fe(2+)/M1 site spectral features need to be carefully assessed in remote-sensed spectra before deductions are made about the presence of olivine on planetary surfaces.

Burns, Roger G.↗
NASA NTRS2000

High Energy Directly Pumped Ho:YLF Laser

The most commonly used crystal architecture to produce 2 micrometer laser is co-doping Ho and Tm into a single host crystal. In this method, the stored energy transfer from the Tm (3)F4 to the Ho (5)I7 manifold is not fast enough to warrant high efficiency for short pulse applications. By separating the Ho and the Tm ions and doping the Tm in YALO3 and the Ho in YLF, we were able to directly pump the Ho (5)I7 manifold with 1.94 micrometers. The Ho:YLF laser has produced 33 mJ at 2.062 micrometers with a quantum efficiency of 0.88. The performance of each laser will be presented.

Petros, Mulugeta↗
NASA NTRS1978

ISEE-C solar wind plasma experiment

Two 135 deg spherical section electrostatic analyzers furnish electron and ion measurements of the solar wind on ISEE-C. Each of these instruments utilizes a divided secondary emitter system to intercept the analyzed particles. Secondary electrons selected from all of the emitters simultaneously provide fast two-dimensional measurements of the particle fluxes integrated over polar angle; at a slower rate secondary electrons are successively selected from individual emitters to provide three-dimensional measurements. Speed of the ion measurements is increased by a factor of two by using an active proton peak tracking system to reduce the total range of energy per charge which has to be covered.

Bame, S. J.↗
NASA NTRS1993

Wave properties near the subsolar magnetopause - Pc 1 waves in the sheath transition layer

We study the waves in the frequency range of Pc 1 in the sheath transition layer of the magnetopause from the ISEE 1 and 2 observations. The waves are enhanced in the sheath transition layer, although they are scattered into the magnetosheath when the outer edge of the sheath transition layer is not sharp. The wave frequency is proportional to, and equal to, about 44 percent of the ion gyrofrequency. The waves are left-handed polarized for southward IMF, but linearly polarized for northward IMF. The direction of maximum variation is perpendicular to both the background field and the gradients of the field and density for northward IMF; for southward IMF, the waves are more turbulent. Wave generation mechanisms may depend on IMF orientations rather than the shock geometry. To investigate the free energy generating the waves for northward IMF, a method is developed combining the measurements from the fast plasma experiment and Lepedea to obtain a high time resolution estimate of the temperature anisotropy for strongly northward IMF. The estimated ion temperature anisotropy is enhanced, up to a factor of 2, within the sheath transition layer for northward IMF.

Song, P.↗
NASA NTRS1995

Large-scale variations of solar wind elemental composition and charge states with heliospheric latitude

The Solar Wind Ion Composition Spectrometer (SWICS) onboard Ulysses allows determination of the elemental composition of the solar wind and the charge states of all major solar wind ion species. Ulysses left the ecliptic plane in early 1992, crossed the Sun's south polar region in late 1994 and made a fast approach back towards the ecliptic in the first half of 1995. Data from this period were investigated for long-term variations in the solar wind composition. At midlatitudes Ulysses encountered periodically the fast solar wind stream emerging from the south coronal hole. As a consequence, dramatic variations in the charge-states arise, between high charge-states dominating in the current sheet solar wind and low charge states in the coronal hole stream. However, the initial analysis indicates that from midlatitudes onwards, with Ulysses permanently immersed in the coronal hole stream, the charge state and elemental abundance ratios of the major solar wind ion species stayed essentially constant. This implies that the temperature profile in the coronal hole at solar wind source altitudes exhibit no variation with solar latitude. It confirms that the south coronal hole is essentially unstructured down to scale lengths of several degrees in solar latitude.

Woch, J.↗
NASA NTRS1983

Collisionless electron shocks in electron-beam-plasma systems

One-dimensional Vlasov simulations show that when an electron beam is suddenly injected into a plasma, a fast-moving monotonic shock forms during the early stage of the transient plasma response. In the shock, the ions are nearly immobile. The shock appears to be an electrostatic electron-beam-plasma mode. The shock evolves from an initial positive potential perturbation, which is supported by an ion burst. The steepening of the perturbation into a shock is characterized by an electron-beam-plasma mode.

Singh, N.↗
NASA NTRS1995

The origin of the solar wind

The high speed solar wind, which is associated with coronal holes and unipolar interplanetary magnetic field, has now been observed in situ beyond 0.3 a.u. and at latitudes up to 80 degrees. Its important characteristics are that it is remarkably steady in terms of flow properties and composition and that the ions, especially minor species, are favored in terms of heating and acceleration. We have proposed that the high speed wind, with its associated coronal holes, forms the basic mode of solar wind flow. In contrast, the low speed wind is inherently non-stationary, filamentary and not in equilibrium with conditions at the coronal base. It is presumably the result of continual reconfigurations of the force-free magnetic field in the low-latitude closed corona which allow trapped plasma to drain away along transiently open flux tubes. Observations of high speed solar wind close to its source are hampered by the essential heterogeneity of the corona, even at sunspot minimum. In particular it is difficult to determine more than limits to the density, temperature and wave amplitude near the coronal base as a result of contamination from fore- and back-ground plasma. We interpret the observations as indicating that the high speed solar wind originates in the chromospheric network, covering only about 1% of the surface of the sun, where the magnetic field is complex and not unipolar. As a result of small-scale reconnection events in this 'furnace', Alfven waves are generated with a flat spectrum covering the approximate range 10 kHz to 10 Hz. The plasma is likely to be produced as a result of downwards thermal conduction and possibly photoionization at the top of the low density chromospheric interface to the furnace, thus controlling the mass flux in the wind. The immediate source of free (magnetic) energy is in the form of granule-sized loops which are continually carried into the network from the sides. The resulting wave spectrum is such that energy can be efficiently transferred to the ions within a few solar radii of the base of the corona, favoring heavy species and creating stable, fast solar wind.

Axford, W. I.↗
NASA NTRS2011

Polymeric Materials With Additives for Durability and Radiation Shielding in Space

Polymeric materials are attractive for use in space structures because of their light weight and high strength In addition, polymers are made of elements with low atomic numbers (Z), primarily carbon (C), hydrogen (H), oxygen (0), and nitrogen (N) which provide the best shielding from galactic cosmic rays (GCR) (ref. 1). Galactic cosmic rays are composed primarily of nuclei (i.e., fully ionized atoms) plus a contribution of about 2% from electrons and positrons. There is a small but significant component of GCR particles with high charge (Z > 10) and high energy (E >100 GeV) (ref. 2). These so-called HZE particles comprise only 1 to 2% of the cosmic ray fluence but they interact with very high specific ionization and contribute 50% of the long- term dose to humans. The best shield for this radiation would be liquid hydrogen, which is not feasible. For this reason, hydrogen-containing polymers make the most effective practical shields. Moreover, neutrons are formed in the interactions of GCR particles with materials. Neutrons can only lose energy by collisions or reactions with a nucleus since they are uncharged. This is a process that is much less probable than the Coulombic interactions of charged particles. Thus, neutrons migrate far from the site of the reaction in which they were formed. This increases the probability of neutrons reaching humans or electronic equipment. Fast neutrons (> 1 MeV) can interact with silicon chips in electronic equipment resulting in the production of recoil ions which can cause single event upsets (SEU) in sensitive components (ref. 3). Neutrons lose energy most effectively by elastic collisions with light atoms, particularly hydrogen atoms. Therefore, hydrogen-containing polymers are not only effective in interacting with GCR particles; they are also effective in reducing the energy of the neutrons formed in the interactions.

Kiefer, Richard↗
NASA NTRSDate not supplied

Hierarchical screening for Li-based solid electrolytes using fast, interpretable machine-learned potentials

Li-based solid-state electrolyte materials enable safer, all-solid-state batteries but the computational search for candidates with favorable stability and Li-ion conductivity is challenging due to the size of the search space and the cost of evaluating transport properties with ab initio methods. The prohibitive cost of high-throughput screening with DFT has lead to the development of surrogate models using geometric analysis, empirical potentials, and descriptors for ionic transport. Here, I will discuss a hierarchical screening approach for identifying promising materials using a combination of density functional theory, bond-valence methods, and machine learning potentials generated with the Ultra-Fast Force Fields (UF3) framework. We show how the inexpensive bond-valence method can be used to guide the generation of training samples for machine learning, in addition to filtering candidates. Finally, we apply the hierarchical workflow to screen for ionic conductivity across a database of Li-containing compounds.

Materials discovery↗
NASA NTRSDate not supplied

Hierarchical Screening for Li-Based Solid Electrolytes Using Fast, Interpretable Machine-Learned Potentials

Li-based solid-state electrolyte materials enable safer, all-solid-state batteries but the computational search for candidates with favorable stability and Li-ion conductivity is challenging due to the size of the search space and the cost of evaluating transport properties with ab initio methods. The prohibitive cost of high-throughput screening with DFT has lead to the development of surrogate models using geometric analysis, empirical potentials, and descriptors for ionic transport. Here, I will discuss a hierarchical screening approach for identifying promising materials using a combination of density functional theory, bond-valence methods, and machine learning potentials generated with the Ultra-Fast Force Fields (UF3) framework. We show how the inexpensive bond-valence method can be used to guide the generation of training samples for machine learning, in addition to filtering candidates.

Materials discovery↗
NASA NTRS2022

The Influence of surface binding energy on sputtering in models of the sodium exosphere of Mercury

We have simulated the sodium (Na) exosphere of Mercury to show how the exosphere is affected by the assumed surface binding energy (SBE) of Na in the sputtered component. We constrained ion precipitation onto the surface using distributions for the cusp regions that are consistent with measurements by the MErcury Surface, Space ENvironment, GEochemistry, and Ranging Fast Imaging Plasma Spectrometer instrument. We have simulated sputtering with SBEs of 0.27, 2.6, 4.4, and 7.9 eV, with the lowest value commonly used in exosphere models and the highest from recent molecular dynamics calculations for the Na-bearing feldspar end-member, albite. A gradual change in the exosphere is seen as the yield decreases and the ejecta energy increases with increasing SBE. We describe the corresponding exosphere source functions for ion sputtering (IS), as well as for the previously studied processes of micrometeoroid impact vaporization and photon-stimulated desorption (PSD), along with their release energy distributions and spatial distributions. We have summed the contributions of the various source processes to explain how and when the different sources can be distinguished by observations. The modeled exosphere scale heights range from 72 km for PSD to over 1000 km for IS using a SBE of 7.9 eV. We find that the processes responsible for generating Mercury's Na exosphere are separable by measuring line-of-sight column densities tangent to the planet at various altitudes and positions around the planet. Our initial results are consistent with the Na being sputtered from a high-SBE material such as feldspar, which has been predicted to be abundant on the Mercury's surface.

Rosemary M. Killen↗
NASA NTRS1987

Cometary MHD and chemistry

An MHD and chemical comet-coma model was developed, applying the computer program of Huebner (1985) for the detailed chemical evolution of a spherically expanding coma and the program of Schmidt and Wegman (1982) and Wegman (1987) for the MHD flow of plasma and magnetic field in a comet to the Giotto-mission data on the ion abundances measured by the HIS ion mass spectrometer. The physics and chemistry of the coma are modeled in great detail, including photoprocesses, gas-phase chemical kinetics, energy balance with a separate electron temperature, multifluid hydrodynamics with a transition to free molecular flow, fast-streaming atomic and molecular hydrogen, counter and cross streaming of the ionized species relative to the neutral species in the coma-solar wind interaction region with momentum exchange by elastic collisions, mass-loading through ion pick-up, and Lorentz forces of the advected magnetic field. The results, both inside and outside of the contact surface, are discussed and compared with the relevant HIS ion mass spectra.

Wegmann, R.↗
NASA NTRS2000

Sub-Optical Lithography With Nanometer Definition Masks

Nanometer feature size lithography represents a major paradigm shift for the electronics and micro-electro-mechanical industries. In this paper, we discuss the capacity of dynamic focused reactive ion beam (FIB) etching systems to undertake direct and highly anisotropic erosion of thick evaporated gold coatings on boron-doped silicon X-ray mask membranes. FIB offers a new level of flexibility in micro fabrication, allowing for fast fabrication of X-ray masks, where pattern definition and surface alteration are combined in the same step which eliminates the whole lithographic process, in particular resist, resist development, electro-deposition and resist removal. Focused ion beam diameters as small as 7 nm can be obtained enabling fabrication well into the sub-20 nm regime. In preliminary demonstrations of this X-ray mask fabrication technique 22 nm width lines were milled directly through 0.9 microns of gold and a miniature mass spectrometer pattern was milled through over 0.5 microns of gold. Also presented are the results of the shadow printing, using the large depth of field of synchrotron high energy parallel X-ray beam, of these and other sub-optical defined patterns in photoresist conformally coated over surfaces of extreme topographical variation. Assuming that electronic circuits and/or micro devices scale proportionally, the surface area of devices processed with X-ray lithography and 20 nm critical dimension X-ray masks would be 0.5% that of contemporary devices (350 nm CD). The 20 CD mask fabrication represents an initial effort - a further factor of three reduction is anticipated which represents a further order-of-magnitude reduction in die area.

Hartley, Frank T.↗