SEARCH · Search NASA

Results for “fault-tolerant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1988

FTMP data acquisition environment

The Fault-Tolerant Multi-Processing (FTMP) test-bed data acquisition environment is described. The performance of two data acquisition devices available in the test environment are estimated and compared. These estimated data rates are used as measures of the devices' capabilities. A new data acquisition device was developed and added to the FTMP environment. This path increases the data rate available by approximately a factor of 8, to 379 KW/S, while simplifying the experiment development process.

Padilla, Peter A.↗

NASA NTRS1987

Reconfigurable tree architectures using subtree oriented fault tolerance

An approach to the design of reconfigurable tree architectures is presented in which spare processors are allocated at the leaves. The approach is unique in that spares are associated with subtrees, and sharing of spares between these subtrees can occur. The subtree-oriented fault-tolerance approach is more reliable than previous approaches capable of tolerating link and switch failures for both single-chip and multichip tree implementations while reducing redundancy in terms of both spare processors and links. VLSI layout is O(n) for binary trees and is directly extensible to N-ary trees and fault tolerance through performance degradation.

Lowrie, Matthew B.↗

NASA NTRS1988

Performance modeling and measurement of real-time multiprocessors with time-shared buses

A closed queueing network model is constructed to address workload effects on computer performance for a highly reliable unibus multiprocessor used in real-time control. The queueing model consists of multiserver nodes and a nonpreemptive priority queue. Use of this model requires partitioning the workload into task classes. The time average steady-state solution of the queueing model directly produces useful results that are necessary in performance evaluation. The model is experimentally justified with the Fault-Tolerant Multiprocessor (FTMP) located at the NASA AIRLAB. Extensive experiments are performed on FTMP with a synthetic workload generator (SWG) to directly measure performance parameters, such as processor idle time, system bus contention, and task processing times. These measurements determine values for parameters in the queueing model. Experimental and analytic results are then compared.

Woodbury, Michael H.↗

NASA NTRS1988

Message routing in an injured hypercube

A distributed fault-tolerant routing scheme for an injured hypercube multicomputer is described. The scheme is based on the topology of the hypercube, and it requires each node to possess only the information on the failure of its own links. A rigorous analysis of the scheme shows that it is not only capable of routing messages successfully in an injured Q(n) when the number of component failures is less than n, but can also choose a shortest path with a very high probability.

Chen, Ming-Syan↗

NASA NTRS1987

Spacecraft on-board SAR processing technology

This paper provides an assessment of the on-board SAR processing technology for Eos-type missions. The proposed Eos SAR sensor and flight data system are introduced, and the SAR processing requirements are described. The SAR on-board SAR processor architecture selection is discussed, and a baseline processor architecture using a frequency-domain processor for range correlation and a modular fault-tolerant VLSI time-domain parallel array for azimuth correlation are described. The mass storage and VLSI technologies needed for implementing the proposed SAR processing are assessed. It is shown that acceptable processor power and mass characteristics should be feasible for Eos-type applications. A proposed development strategy for the on-board SAR processor is presented.

Liu, K. Y.↗

NASA NTRS1987

Systems utilization enhancement data system overview

An overview of the Systems Utilization Enhancement (SUE) data system is presented. The subsystems are described, including the telemetry processor, communications processor, digital maintenance and control subsystem, link console subsystem, digital recording subsystem, communications processor SUE system interface unit, data quality monitoring subsystem, analog parameter and event recorder, status SUE system interface unit, and portable maintenance subsystem. Hardware design considerations are discussed, including architecture, coupling, commonality, modularity. reliability, fault-tolerance, and growth.

Schmid, J. Andre↗

NASA NTRS1987

NAECON 87; Proceedings of the IEEE National Aerospace and Electronics Conference, Dayton, OH, May 18-22, 1987. Volumes 1, 2, 3, & 4

The present conference discusses topics in VLSI components and their packaging, signal processing, uses of cartographic data, data transmission, advanced avionics architectures, fiber-optics, information control and display, image processing, airborne radar and fire control, navigation, air data, Kalman filtering, power generation and control, spacecraft power structures, aircraft flying qualities, flight management, fault-tolerant computer architectures, actuation technologies, self-repairing flight control system technology, multivariable control, stability and control methods, and AFTI/F-16 flight test reports. Also discussed are the ADA/JOVIAL language and its applications, software acquisition and testing, advanced software concepts, software management, computer graphics and visual systems softwear, ADA in embedded avionics, 16- and 32-bit architectures, voice interaction applications, human/machine systems analysis, human factors and AI, mental workloads and displays, pilot acceleration protection research, communications system technology, space communications, reliability and maintainability, managerial techniques, engineering management, EM compatibility and nuclear hardening, expert systems, AI language/knowledge representation, expert system implementation, machine vision/optical processing, and advanced AI concepts and architectures.

Avionics↗

NASA NTRS1988

Flight test results of a vector-based failure detection and isolation algorithm for a redundant strapdown inertial measurement unit

Flight test results of a vector-based fault-tolerant algorithm for a redundant strapdown inertial measurement unit are presented. Because the inertial sensors provide flight-critical information for flight control and navigation, failure detection and isolation is developed in terms of a multi-level structure. Threshold compensation techniques for gyros and accelerometers, developed to enhance the sensitivity of the failure detection process to low-level failures, are presented. Four flight tests, conducted in a commercial transport type environment, were used to determine the ability of the failure detection and isolation algorithm to detect failure signals, such a hard-over, null, or bias shifts. The algorithm provided timely detection and correct isolation of flight control- and low-level failures. The flight tests of the vector-based algorithm demonstrated its capability to provide false alarm free dual fail-operational performance for the skewed array of inertial sensors.

Morrell, F. R.↗

NASA NTRS1988

Automated generation of reliability models

The abstract semi-Markov specification interface to the SURE (Semi-Markov Range Evaluator) tool (ASSIST) program allows the user to describe the Markov model in a high-level language. Instead of listing the individual states of the model, the user specifies the rules governing the behavior of the system, and these are used to automatically generate the model. A small number of statements in the abstract language can describe a large, complex model. Becuase no assumptions are made about the system being modeled, ASSIST can be used to generate models describing the behavior of any type of system. The abstract model definition and the automatic model generation strategy are described. Analysis of an example fault-tolerant architecture, a triad of processor with cold spare processors, shows how the behavior of a system can be captured by a few general rules. The syntax of the ASSIST input language is then described and demonstrated by creating a model to describe the fault behavior of the example architecture. The flexibility of the abstract language is demonstrated by expanding the example to model multiple triads of processors sharing a pool of cold spare processors.

Johnson, Sally C.↗

NASA NTRS1988

Feasibility of using GPS measurements for OMV attitude update

This paper presents the results of a feasibility study to determine whether the measurements from GPS satellites can be used to estimate the OMV attitude to an accuracy comparable to the onboard sun sensors, i.e., better than 0.5 degree in each axis. The results documented in this paper demonstrate that OMV attitude can be estimated to an accuracy of 0.1 - 0.5 degree in each axis by processing GPS measurements in an onboard integrated, 17-state GPS/inertial navigation filter. The result is particularly significant for missions of short duration burns where accurate attitude information is needed to minimize guidance and control errors. It is shown that the GPS attitude technique described in this paper can be easily implemented in the current OMV navigation system design. Results reported in this paper are expected to support the goal of developing a fault-tolerant guidance, navigation, and control system offering an improved total navigation performance for the OMV.

Upadhyay, Triveni N.↗

NASA NTRS1988

Flight demonstration of redundancy management algorithms for a skewed array of inertial sensors

Flight test results for two fault-tolerance algorithms developed for a redundant strapdown inertial measurement unit consisting of four 2-DOF gyros and accelerometers mounted on the faces of a semioctahedron are presented. Although both algorithms provided timely detection and isolation of flight control level failures, the generalized likelihood test algorithm provided more timely detection and isolation of low-level sensor failures than the edge vector test algorithm. The generalized likelihood test produced a false isolation for the case of a dual low-level failure applied to the sensitive axes of an accelerometer. Both of the algorithms were shown to provide dual fail-operational performance for the skewed array of inertial sensors.

Morrell, F. R.↗

NASA NTRS1988

Modeling and measurement of error propagation in a multimodule computing system

An error propagation model has been developed for multimodule computing systems in which the main parameters are the distribution functions of error propagation times. A digraph model is used to represent a multimodule computing system, and error propagation in the system is modeled by general distributions of error propagation times between all pairs of modules. Two algorithms are developed to compute systematically and efficiently the distributions of error propagation times. Experiments are also conducted to measure the distributions of error propagation times with the fault-tolerant microprocessor (FTMP). Statistical analysis of experimental data shows that the error propagation times in FTMP do not follow a well-known distribution, thus justifying the use of general distributions in the present model.

Shin, Kang G.↗

NASA NTRS1988

A cascaded Schwarz converter for high frequency power distribution

It is shown that two Schwarz converters in cascade provide a very reliable 20-kHz source that features zero current commutation, constant frequency, and fault-tolerant operation, meeting requirements for spacecraft applications. A steady-state analysis of the converter is presented, and equations for the steady-state performance are derived. Fault-current limiting is discussed. Experimental results are presented for a 900-W version, which has been successfully tested under no-load, full-load, and short-circut conditions.

Ray, Biswajit↗

NASA NTRS1986

Space station Ada runtime support for nested atomic transactions

The Space Station Data Management System (DMS), associated computing subsystems, and applications have varying degrees of reliability associated with their operation. A model has been developed (McKay '86) which allows the DMS runtime environment to appear as an Ada virtual machine to applications executing within it. This model is modular, flexible, and dynamically configurable to allow for evolution and growth over time. Support for Fault-tolerant computing is included within this model. The basic primitive involved in this support is based on atomic actions (Grey '78). An atomic action possesses two fundamental properties: (1) it is indivisible with respect to concurrent actions, and (2) it is indivisible with respect to failure. A transaction is a collection of atomic actions which collectively appear to be one action. Transactions may be nested, providing even more powerful support for reliability. A proposed approach is described for providing support for nested atomic transactions within the Ada runtime model developed for the Space Station environment. The level of support is modular, flexible and dynamically configurable just like the overall runtime support environment.

Monteiro, Edward J.↗

NASA NTRS1988

Development and flight test experiences with a flight-crucial digital control system

Engineers and scientists in the advanced fighter technology integration (AFTI) F-16 program investigated the integration of emerging technologies into an advanced fighter aircraft. AFTI's three major technologies included: flight-crucial digital control, decoupled aircraft flight control, and integration of avionics, flight control, and pilot displays. In addition to investigating improvements in fighter performance, researchers studied the generic problems confronting the designers of highly integrated flight-crucial digital control. An overview is provided of both the advantages and problems of integration digital control systems. Also, an examination of the specification, design, qualification, and flight test life-cycle phase is provided. An overview is given of the fault-tolerant design, multimoded decoupled flight control laws, and integrated avionics design. The approach to qualifying the software and system designs is discussed, and the effects of design choices on system qualification are highlighted.

Mackall, Dale A.↗

NASA NTRS1988

Applications of an architecture design and assessment system (ADAS)

A new Architecture Design and Assessment System (ADAS) tool package is introduced, and a range of possible applications is illustrated. ADAS was used to evaluate the performance of an advanced fault-tolerant computer architecture in a modern flight control application. Bottlenecks were identified and possible solutions suggested. The tool was also used to inject faults into the architecture and evaluate the synchronization algorithm, and improvements are suggested. Finally, ADAS was used as a front end research tool to aid in the design of reconfiguration algorithms in a distributed array architecture.

Gray, F. Gail↗

NASA NTRS1988

Reliability analysis of large, complex systems using ASSIST

The SURE reliability analysis program is discussed as well as the ASSIST model generation program. It is found that semi-Markov modeling using model reduction strategies with the ASSIST program can be used to accurately solve problems at least as complex as other reliability analysis tools can solve. Moreover, semi-Markov analysis provides the flexibility needed for modeling realistic fault-tolerant systems.

Johnson, Sally C.↗

NASA NTRS1988

Hardware and software fault tolerance - A unified architectural approach

The loss of hardware fault tolerance which often arises when design diversity is used to improve the fault tolerance of computer software is considered analytically, and a unified design approach is proposed to avoid the problem. The fundamental theory of fault-tolerant (FT) architectures is reviewed; the current status of design-diversity software development is surveyed; and the FT-processor/attached-processor (FTP/AP) architecture developed by Lala et al. (1986) is described in detail and illustrated with diagrams. FTP/AP is shown to permit efficient implementation of N-version FT software while still tolerating random hardware failures with very high coverage; the reliability is found to be significantly higher than that of conventional majority-vote N-version software.

Lala, Jaynarayan H.↗