Search NASA⌕ Search

SEARCH · Search NASA

Results for “feature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Using high spectral resolution spectrophotometry to study broad mineral absorption features on Mars

Traditionally telescopic measurements of mineralogic absorption features have been made using relatively low to moderate (R=30-300) spectral resolution. Mineralogic absorption features tend to be broad so high resolution spectroscopy (R greater than 10,000) does not provide significant additional compositional information. Low to moderate resolution spectroscopy allows an observer to obtain data over a wide wavelength range (hundreds to thousands of wavenumbers) compared to the several wavenumber intervals that are collected using high resolution spectrometers. However, spectrophotometry at high resolution has major advantages over lower resolution spectroscopy in situations that are applicable to studies of the Martian surface, i.e., at wavelengths where relatively weak surface absorption features and atmospheric gas absorption features both occur.

Blaney, D. L.↗
NASA NTRS1993

Modeling of the ground-to-SSFMB link networking features using SPW

This report describes the modeling and simulation of the networking features of the ground-to-Space Station Freedom manned base (SSFMB) link using COMDISCO signal processing work-system (SPW). The networking features modeled include the implementation of Consultative Committee for Space Data Systems (CCSDS) protocols in the multiplexing of digitized audio and core data into virtual channel data units (VCDU's) in the control center complex and the demultiplexing of VCDU's in the onboard baseband signal processor. The emphasis of this work has been placed on techniques for modeling the CCSDS networking features using SPW. The objectives for developing the SPW models are to test the suitability of SPW for modeling networking features and to develop SPW simulation models of the control center complex and space station baseband signal processor for use in end-to-end testing of the ground-to-SSFMB S-band single access forward (SSAF) link.

Watson, John C.↗
NASA NTRS1994

Specific features of space-time variations of ozone during the development of intensive tropical disturbances

An analysis of specific features of space-time variations of ozone in the tropical areas which has been performed on the basis of processing of the results of special expedition studies in the Atlantic and Pacific in 1987-1990 and the data of observations at the stations of the world ozonometric network over the 25-year period. The existence of a cause-and-effect relation has been revealed between the processes determining tropical cyclone (TC) development, and specific features of variations of the total content of ozone (TCO) and the vertical distribution of ozone (VDO) in the regions of TC action. Characteristic features of day-to-day and daily variations of TCO during TC development have been found. On the periphery of a developing TC, 1-4 days before it reaches the stage of storm, TCO increases, on average, by 5-8 percent, and a substantial increase in the concentration of ozone occurs in the middle and upper troposphere. The most probable physical mechanisms relating the observed specific features of ozone variations to TC evolution have been suggested. A hypothesis of the possibility of using ozone as an indicator for early prediction of TC development has been substantiated.

Nerushev, Alexander F.↗
NASA NTRS1994

Satellite emission features in two Seyfert galaxies: New evidence that radio-quiet AGN possess subrelativistic winds

Hubble Space Telescope (HST) Faint Object Spectrograph (FOS) spectra are presented for three bright Seyfert galaxies including one (PG 1351+64) which possesses blue-displaced absorption features in C IV, Si IV, N V, and Ly-alpha (but not in Mg II) similar to those seen at high redshift in the broad-absorption-line (BAL) quasi-stellar objects (QSOs). Several features of the absorptions in PG 1351+64, including variability seen in archival International Ultraviolet Explorer (IUE) data, confirm their similarity to the BAL clouds rather than to the 'associated absorber' phenomenon which they superficially resemble. In PG 1351+64 'satellite' emission lines (called herein E1 and E2) have been detected nearly symmetrically placed at +/- 4000 km/s around the Mg II emission line; this velocity is just larger than the most blue-displaced of the BALs, suggesting that these two phenomena are related. The satellite line luminosity, L(E1) approximately = (3 x 10(exp 41) erg/s)/sq. h(sub 75), requires a cloud emission measure n(sub e)(exp 2)V(sub c) approximately = (1 x 10(exp 64)/cc)/sq. h(sub 75) at T approximately = 30,000 K. We believe the Mg II lines are produced by 50-90 km/s shocks driven into dense (approximately 10(exp 6)/cc, pre-shock) clouds by the ram pressure of a 0.1 solar mass/yr wind leaving the nucleus at velocity 4000 km/s. The detection of satellite lines in Mg II, the detection of the blue-shifted cloud in H-alpha and H-beta and the nondetection of this cloud in C IV restricts the cloud shocks to velocities v(sub c) less than or = 90 km/s and requires a cloud/wind density contrast greater than or = 10(exp 3). In this model, the emitting clouds are located at distances of R(sub eff) approximately = 10(exp 18-19) cm from the nucleus and are entrained and shock-accelerated to approximately 4000 km/s. The possible detection of similar 'satellite' emission features in the non-BAL Seyfert, Ton 951, suggests that the subrelativistic wind that accelerates BAL clouds is a physical feature of many radio-quiet active galactic nuclei (AGN).

Stocke, John T.↗
NASA NTRS1994

Detection of the overtone of the 3.3 micron emission feature in IRAS 21282+5050

The 1.6-1.8 micron spectrum of the planetary nebula, IRAS 21282+5050, a strong emitter of the unidentified interstellar bands, contains a 0.02 micron wide eimission feature centered at 1.680 micron, which is well matched by laboratory spectra of the 0-2 CH stretching mode in polycyclic aromatic hydrocarbons (PAHs). We identify the new feature as the overtone of the well-known 3.3 micron band. In view of the high excitation required for emission in this band, the identification indicates that the emission is by free molecules rather than molecular moieties in solid dust grains. Modeling of the intensity ratio of the 2-0 to 1-0 band implied that the PAHs emitting in these bands contain about 60 carbon atoms. It is inferred that the nu = 2-1 hot band of the CH stretching mode occurs at about 3.43 micron and contributes to the long-wavelength shoulder of the 3.40 micron feature. The main 3.40 micron feature probably is due to aliphatic sidegroups on PAH molecules.

Geballe, T. R.↗
NASA NTRS1995

Simulated cosmic microwave background maps at 0.5 deg resolution: Unresolved features

High-contrast peaks in the cosmic microwave background (CMB) anisotropy can appear as unresolved sources to observers. We fit simluated CMB maps generated with a cold dark matter model to a set of unresolved features at instrumental resolution 0.5 deg-1.5 deg to derive the integral number density per steradian n (greater than absolute value of T) of features brighter than threshold temperature absolute value of T and compare the results to recent experiments. A typical medium-scale experiment observing 0.001 sr at 0.5 deg resolution would expect to observe one feature brighter than 85 micro-K after convolution with the beam profile, with less than 5% probability to observe a source brighter than 150 micro-K. Increasing the power-law index of primordial density perturbations n from 1 to 1.5 raises these temperature limits absolute value of T by a factor of 2. The MSAM features are in agreement with standard cold dark matter models and are not necessarily evidence for processes beyond the standard model.

Kogut, A.↗
NASA NTRS1995

Photospheric, circumstellar, and interstellar features of HE, C, N. O, and Si in the HST spectra of four hot white dwarf stars

This paper reports on the observations of four hot white dwarf stars with the spectrographs on the Hubble Space Telescope (HST). The higher resolving power and higher signal/noise, in comparison with IUE, reveals a very rich phenomomenology, including photospheric features from heavy elements, circumstellar features, and the first direct detection of accretion onto the white dwarf component of a binary system. Specific results include the following: Our observations of the ultrahot degenerate H1504+65 confirm that it has a photosphere which is depleted in both H and He, and reveals features of C IV and O VI. The spectrum fits previously published models extremely well. The intermediate-temperature DO star PG 1034+001 has an ultraviolet spectrum showing complex profiles of the well-known resonance doublets of C IV, N v, and Si IV. The O V 1371 line shows a clear separation into a photospheric and a circumstellar component, and it is likely that the same two components can explain the other lines as well. The cooler DA star GD 394 has an extensive system of heavy-element features, but their radial velocity is such that it is highly unlikely that they are formed in the stellar photosphere. Time-resolved spectra of the accreting white dwarf in the V 471 Tau binary system are briefly presented here; they do show the presence of C IV, Si IV, and He II. However, the C IV and He II lines are in emission, rather than in aborption as had been expected.

Shipman, Harry L.↗
NASA NTRS1996

Detection of obstacles on runway using Ego-Motion compensation and tracking of significant features

This report describes a method for obstacle detection on a runway for autonomous navigation and landing of an aircraft. Detection is done in the presence of extraneous features such as tiremarks. Suitable features are extracted from the image and warping using approximately known camera and plane parameters is performed in order to compensate ego-motion as far as possible. Residual disparity after warping is estimated using an optical flow algorithm. Features are tracked from frame to frame so as to obtain more reliable estimates of their motion. Corrections are made to motion parameters with the residual disparities using a robust method, and features having large residual disparities are signaled as obstacles. Sensitivity analysis of the procedure is also studied. Nelson's optical flow constraint is proposed to separate moving obstacles from stationary ones. A Bayesian framework is used at every stage so that the confidence in the estimates can be determined.

Kasturi, Rangachar↗
NASA NTRS1999

Feature Profile Evolution of SiO2 Trenches In Fluorocarbon Plasmas

Etching of silicon microstructures for semiconductor manufacturing in chlorine plasmas has been well characterized. The etching proceeds in a two-part process, where the chlorine neutrals passivate the Si surface and then the ions etch away SiClx. However, etching in more complicated gas mixtures and materials, such as etching of SiO2 in Ar/C4F8, requires knowledge of the ion and neutral distribution functions as a function of angle and velocity, in addition to modeling the gas surface reactions. In order to address these needs, we have developed and integrated a suite of models to simulate the etching process from the plasma reactor level to the feature profile evolution level. This arrangement allows for a better understanding, control, and prediction of the influence of equipment level process parameters on feature profile evolution. We are currently using the HPEM (Hybrid Plasma Equipment Model) and PCMCM (Plasma Chemistry Monte Carlo Model) to generate plasma properties and ion and neutral distribution functions for argon/fluorocarbon discharges in a GEC Reference Cell. These quantities are then input to the feature scale model, Simulation of Profile Evolution by Level Sets (SPELS). A surface chemistry model is used to determine the interaction of the incoming species with the substrate material and simulate the evolution of the trench profile. The impact of change of gas pressure and inductive power on the relative flux of CFx and F to the wafer, the etch and polymerization rates, and feature profiles will be examined. Comparisons to experimental profiles will also be presented.

Hwang, Helen↗
NASA NTRS2003

Feature Visibility Limits in the Non-Linear Enhancement of Turbid Images

The advancement of non-linear processing methods for generic automatic clarification of turbid imagery has led us from extensions of entirely passive multiscale Retinex processing to a new framework of active measurement and control of the enhancement process called the Visual Servo. In the process of testing this new non-linear computational scheme, we have identified that feature visibility limits in the post-enhancement image now simplify to a single signal-to-noise figure of merit: a feature is visible if the feature-background signal difference is greater than the RMS noise level. In other words, a signal-to-noise limit of approximately unity constitutes a lower limit on feature visibility.

Jobson, Daniel J.↗
NASA NTRS2004

Automated Extraction of Flow Features

Computational Fluid Dynamics (CFD) simulations are routinely performed as part of the design process of most fluid handling devices. In order to efficiently and effectively use the results of a CFD simulation, visualization tools are often used. These tools are used in all stages of the CFD simulation including pre-processing, interim-processing, and post-processing, to interpret the results. Each of these stages requires visualization tools that allow one to examine the geometry of the device, as well as the partial or final results of the simulation. An engineer will typically generate a series of contour and vector plots to better understand the physics of how the fluid is interacting with the physical device. Of particular interest are detecting features such as shocks, recirculation zones, and vortices (which will highlight areas of stress and loss). As the demand for CFD analyses continues to increase the need for automated feature extraction capabilities has become vital. In the past, feature extraction and identification were interesting concepts, but not required in understanding the physics of a steady flow field. This is because the results of the more traditional tools like; iso-surface, cuts and streamlines, were more interactive and easily abstracted so they could be represented to the investigator. These tools worked and properly conveyed the collected information at the expense of a great deal of interaction. For unsteady flow-fields, the investigator does not have the luxury of spending time scanning only one "snapshot" of the simulation. Automated assistance is required in pointing out areas of potential interest contained within the flow. This must not require a heavy compute burden (the visualization should not significantly slow down the solution procedure for (co-processing environments). Methods must be developed to abstract the feature of interest and display it in a manner that physically makes sense.

Dorney, Suzanne↗
NASA NTRS2003

Martian North Polar Impacts and Volcanoes: Feature Discrimination and Comparisons to Global Trends

The recent Mars Global Surveyor and Mars Odyssey Missions have greatly improved our available data for the north polar region of Mars. Pre- MGS and MO studies proposed possible volcanic features, and have revealed numerous volcanoes and impact craters in a range of weathering states that were poorly visible or not visible in prior data sets. This new data has helped in the reassessment of the polar deposits. From images or shaded Mars Orbiter Laser Altimeter (MOLA) topography grids alone, it has proved to be difficult to differentiate cratered cones of probable volcanic origins from impact craters that appear to have been filled. It is important that the distinction is made if possible, as the relative ages of the polar deposits hinge on small numbers of craters, and the local volcanic regime originally only proposed small numbers of volcanoes. Therefore, we have expanded prior work on detailed topographic parameter measurements and modeling for the polar volcanic landforms and mapped and measured all of the probable volcanic and impact features for the north polar region as well as other midlatitude fields, and suggest that: 1) The polar volcanic edifices are significantly different topographically from midlatitude edifices, and have steeper slopes and larger craters as a group; 2) The impact craters are actually distinct from the volcanoes in terms of the feature volume that is cavity compared to feature volume that is positive relief; 3) There are actually several distinct types of volcanic edifices present; 4) These types tend to be spatially grouped by edifice. This is a contrast to many of the other small volcanic fields around Mars, where small edifices tend to be mixed types within a field.

Sakimoto, E. H.↗
NASA NTRS2005

Combined Feature Based and Shape Based Visual Tracker for Robot Navigation

We have developed a combined feature based and shape based visual tracking system designed to enable a planetary rover to visually track and servo to specific points chosen by a user with centimeter precision. The feature based tracker uses invariant feature detection and matching across a stereo pair, as well as matching pairs before and after robot movement in order to compute an incremental 6-DOF motion at each tracker update. This tracking method is subject to drift over time, which can be compensated by the shape based method. The shape based tracking method consists of 3D model registration, which recovers 6-DOF motion given sufficient shape and proper initialization. By integrating complementary algorithms, the combined tracker leverages the efficiency and robustness of feature based methods with the precision and accuracy of model registration. In this paper, we present the algorithms and their integration into a combined visual tracking system.

Deans, J.↗
NASA NTRS2005

Channels and Fan-like Features on Titan Surface Imaged by the Cassini RADAR

During two close flybys of Titan on October 26, 2004, and February 15, 2005, the Cassini s radar instrument acquired synthetic-aperture radar (SAR) data revealing Titan s complex surface and intriguing geological features. Fan-like and apparently flow-related features are connected to sinuous and linear features which resemble channels. The fan-like features and channels appear to be relatively SAR-bright and suggest surface roughness properties at the scale and bigger than the Ku-band, and possible volume scattering. A strong correlation between the SAR-bright and radiometric cold regions has been observed. The correlation is consistent with radiometric cold areas being caused by volume scattering at Ku as due to broken low-loss ice and resulting low emissivity as with the surfaces of Europa and Ganymede.

Paganelli, F.↗
NASA NTRS2005

Automated Extraction of Flow Features

Computational Fluid Dynamics (CFD) simulations are routinely performed as part of the design process of most fluid handling devices. In order to efficiently and effectively use the results of a CFD simulation, visualization tools are often used. These tools are used in all stages of the CFD simulation including pre-processing, interim-processing, and post-processing, to interpret the results. Each of these stages requires visualization tools that allow one to examine the geometry of the device, as well as the partial or final results of the simulation. An engineer will typically generate a series of contour and vector plots to better understand the physics of how the fluid is interacting with the physical device. Of particular interest are detecting features such as shocks, re-circulation zones, and vortices (which will highlight areas of stress and loss). As the demand for CFD analyses continues to increase the need for automated feature extraction capabilities has become vital. In the past, feature extraction and identification were interesting concepts, but not required in understanding the physics of a steady flow field. This is because the results of the more traditional tools like; isc-surface, cuts and streamlines, were more interactive and easily abstracted so they could be represented to the investigator. These tools worked and properly conveyed the collected information at the expense of a great deal of interaction. For unsteady flow-fields, the investigator does not have the luxury of spending time scanning only one "snapshot" of the simulation. Automated assistance is required in pointing out areas of potential interest contained within the flow. This must not require a heavy compute burden (the visualization should not significantly slow down the solution procedure for co-processing environments). Methods must be developed to abstract the feature of interest and display it in a manner that physically makes sense.

Dorney, Suzanne↗
NASA NTRS2005

Variations in the Peak Position of the 6.2 micron Interstellar Emission Feature: A Tracer of N in the Interstellar Polycyclic Aromatic Hydrocarbon Population

This paper presents the results of an investigation of the molecular characteristics that underlie the observed peak position and profile of the nominal 6.2 micron interstellar emission band generally attributed to the CC stretching vibrations of polycyclic aromatic hydrocarbons (PAHs). It begins with a summary of recent experimental and theoretical studies ofthe spectroscopic properties of large (>30 carbon atoms) PAH cations as they relate to this aspect of the astrophysical problem. It then continues with an examination of the spectroscopic properties of a number of PAH variants within the context of the interstellar 6.2 micron emission, beginning with a class of compounds known as polycyclic aromatic nitrogen heterocycles (PANHs; PAHs with one or more nitrogen atoms substituted into their carbon skeleton). In this regard, we summarize the results of recent relevant experimental studies involving a limited set of small PANHs and their cations and then report the results of a comprehensive computational study that extends that work to larger PANH cations including many nitrogen-substituted variants of coronene(+) (C24H12(+)), ovalene(+) (C32H14(+)), circumcoronene(+) (C54H18(+)), and circum-circumcoronene(+) (C96H24(+)). Finally, we report the results of more focused computational studies of selected representatives from a number of other classes of PAH variants that share one or more of the key attributes of the PANH species studied. These alternative classes of PAH variants include (1) oxygen- and silicon-substituted PAH cations; (2) PAH-metal ion complexes (metallocenes) involving the cosmically abundant elements magnesium and iron; and (3) large, asymmetric PAH cations. Overall, the studies reported here demonstrate that increasing PAH size alone is insuEcient to account for the position of the shortest wavelength interstellar 6.2 micron emission bands, as had been suggested by earlier studies. On the other hand, this work reveals that substitution of one or more nitrogen atoms within the interior of the carbon skeleton of a PAH cation induces a significant blueshift in the position of the dominant CC stretching feature of these compounds that is suf6cient to account for the position of the interstellar bands. Subsequent studies of the effects of substitution by other heteroatoms (O and Si), metal ion complexation (Fe(+), Mg(+), and Mg(2+)), and molecular symmetry variation-all of which fail to reproduce the blueshift observed in the PANH cations-indicate that N appears to be unique in its ability to accommodate the position of the interstellar 6.2 micron bands while simultaneously satisfying the other constraints of the astrophysical problem. This result implies that the peak position of the interstellar feature near 6.2 micron traces the degree of nitrogen substitution in the population, that most of the PAHs responsible for the interstellar IR emission features incorporate nitrogen within their aromatic networks, and that a lower limit of 1%-2% of the cosmic nitrogen is sequestered within the interstellar PAH population. Finally, in view of the ubiquity and abundance of interstellar PAHs and the permanent dipoles and distinctive electronic structures of these nitrogen-substituted variants, this work impacts a wide range of observational phenomena outside of the infrared region of the spectrum including the forest of unidentified molecular rotational features and the anomalous Galactic foreground emission in the microwave, and the diffuse interstellar bands (DIBs) and other structure in the interstellar extinction curve in the ulhviolet/visible. These astrophysical ramifications are discussed, and the dipole moments and rotational constants are tabulated to facilitate further investigations of the astrophysical role of nitrogen-substituted aromatic compounds.

Hudgins, Douglas M.↗
NASA NTRS2005

Noise, Edge Extraction and Visibility of Features

Noise, whether due to the image-gathering device or some other reason, reduces the visibility of fine features in an image. Several techniques attempt to mitigate the impact of noise by performing a low-pass filtering operation on the acquired data. This is based on the assumption that the uncorrelated noise has high-frequency content and thus will be suppressed by low-pass filtering. A result of this operation is that edges in a noisy image also tend to get blurred, and, in some cases, may get completely lost due to the low-pass filtering. In this paper, we quantitatively assess the impact of noise on fine feature visibility by using computer-generated targets of known spatial detail. Additionally, we develop a new scheme for noise-reduction based on the connectivity of edge-features. The overall impact of this scheme is to reduce overall noise, yet retain the high frequency content that make edge-features sharp.

Rahman, Zia-ur↗
NASA NTRS2006

Innovation in Aerodynamic Design Features of Soviet Missiles

Wind tunnel investigations of some tactical and strategic missile systems developed by the former Soviet Union have been included in the basic missile research programs of the NACA/NASA. Studies of the Soviet missiles sometimes revealed innovative design features that resulted in unusual or unexpected aerodynamic characteristics. In some cases these characteristics have been such that the measured performance of the missile exceeds what might have been predicted. In other cases some unusual design features have been found that would alleviate what might otherwise have been a serious aerodynamic problem. In some designs, what has appeared to be a lack of refinement has proven to be a matter of expediency. It is a purpose of this paper to describe some examples of unusual design features of some Soviet missiles and to illustrate the effectiveness of the design features on the aerodynamic behavior of the missile. The paper draws on the experience of the author who for over 60 years was involved in the aerodynamic wind tunnel testing of aircraft and missiles with the NACA/NASA.

Spearman, M. Leroy↗