Search NASA⌕ Search

SEARCH · Search NASA

Results for “fusion experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Microcalorimeter measurement of x-ray spectra from a high-temperature magnetically confined plasma

A NASA-built x-ray microcalorimeter spectrometer has been installed on the MST facility at the Wisconsin Plasma Physics Laboratory and has recorded x-ray photons emitted by impurity ions of aluminum in a majority deuterium plasma. Much of the x-ray microcalorimeter development has been driven by the needs of astrophysics missions, where imaging arrays with few-eV spectral resolution are required. The goal of our project is to adapt these single-photon-counting microcalorimeters for magnetic fusion energy research and demonstrate the value of such measurements for fusion science. Microcalorimeter spectrometers combine the best characteristics of the x-ray instrumentation currently available on fusion devices: high spectral resolution similar to an x-ray crystal spectrometer and the broadband coverage of an x-ray pulse height analysis system. Fusion experiments are increasingly employing high-Z plasma-facing components and require measurement of the concentration of all impurity ion species in the plasma. This diagnostic has the capability to satisfy this need for multi-species impurity ion data and will also contribute to measurements of impurity ion temperature and flow velocity, Zeff, and electron density. Here, we introduce x-ray microcalorimeter detectors and discuss the diagnostic capability for magnetic fusion energy experiments. We describe our experimental setup and spectrometer operation approach at MST, and we present the results from an initial measurement campaign.

Eckart, M. E. (ORCID:0000000338945889)↗

Conceptual design of DIII-D experiments to diagnose the lifetime of spin polarized fuel

Abstract In magnetic fusion experiments, the cross sections for the D-T and D- 3 He fusion reactions are increased by as much as 50% if the fuel remains spin polarized parallel to the magnetic field. The goal of this study is to assess the feasibility of lifetime measurements of spin polarization, in magnetic fusion relevant conditions, on the DIII-D tokamak using relative changes in charged fusion product (CFP) loss measurements that depend upon the differential fusion cross section d σ /dΩ. Relative measurements that capture changes in the escaping CFP pitch, poloidal, and energy distributions are studied in two realistic TRANSP calculated plasma scenarios: (a) vector-polarized 3 He and D pellets are injected into a hot hydrogen plasma to produce thermonuclear reactions, and (b) a tensor-polarized deuterium pellet is injected into an L-mode hydrogen background plasma that includes unpolarized 3 He neutral beam injection. Ideal CFP signals in both scenarios show substantial pitch sensitivity to polarization for 14.7 MeV proton detection at a poloidal angle of − 56 ∘ (on the outer wall in the ion ∇ B direction), and strong sensitivity to polarization for 3.6 MeV alpha flux detection by an array of poloidal detectors. Energy-resolved measurements of 14.7 MeV protons are also sensitive to the degree of polarization for the − 56 ∘ port in the beam-plasma scenario. A realistic assessment of CFP signals in the thermonuclear scenario show count rates in the range of 2 × 10 4 cps for pitch-resolved proton detection and 2 × 10 5 cps for alpha flux measurements. Reduced chi-squared χ r 2 calculations show polarization lifetime measurements are feasible for either proton or alpha detection of both enhanced or suppressed polarization for the thermonuclear scenario. Measurements of gamma rays produced in the weak D + 3 He → γ + 5 Li branch complement the CFP measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron source reconstruction using a generalized expectation–maximization algorithm on one-dimensional neutron images from the Z facility

Magnetized Liner Inertial Fusion experiments have been performed at the Z facility at Sandia National Laboratories. These experiments use deuterium fuel, which produces 2.45 MeV neutrons on reaching thermonuclear conditions. To study the spatial structure of neutron production, the one-dimensional imager of neutrons diagnostic was fielded to record axial resolved neutron images. In this diagnostic, neutrons passing through a rolled edge aperture form an image on a CR-39-based solid state nuclear track detector. In this report we present a modified generalized expectation–maximization algorithm to reconstruct an axial neutron emission profile of the stagnated fusion plasma. We validate the approach by comparing the reconstructed neutron emission profile to an x-ray emission profile provided by a time-integrated pinhole camera.

47 OTHER INSTRUMENTATION↗

Exploring scenarios for enhanced fuel compression and performance on the National Ignition Facility with machine-learning-aided design techniques

Recent fusion experiments on the National Ignition Facility (NIF) have achieved ignition, producing multi-MJ fusion yields for input laser energies of roughly 2 MJ [Abu-Shawareb et al., Phys. Rev. Lett. 132, 065102 (2024)]. Building on the success of the target designs that have achieved ignition, we explore new implosion scenarios predicted to generate significantly more compression of the dense DT ice layer and correspondingly higher yields while preserving many of the key physics characteristics of present-day ignition designs. Our main result is a novel 3-shock implosion scheme that effectively minimizes the shock-induced entropy in the dense, accelerating DT shell and maximizes the resulting fuel compression subject to a fixed leading shock strength consistent with present-day ignition experiments, which is necessary to melt the crystalline high-density carbon ablator. Compared to the first NIF experiment to fulfill Lawson's ignition criterion, shot N210808 [Abu-Shawareb et al., Phys. Rev. Lett. 129, 075001 (2022)], our design exhibits a 40% increase in simulated peak areal density (ρR) and a 5× increase in 1D fusion yield using a 4% lighter ablator and identical DT payloads. We also present a complete integrated 2D hohlraum design and laser pulse specifications capable of generating the desired 3-shock drive and maintaining control of the low-mode capsule implosion symmetry, where the increase in simulated 2D yield relative to N210808 is > 10×. This new implosion regime was discovered with help from a machine-learning-enabled capsule design optimization framework. We outline the workflow this automated tool uses to identify improved design candidates by running several rounds of capsule simulations, constructing a surrogate model mapping input variations to key physics output quantities, and querying the resulting statistical model to propose adjustments to the x-ray drive and capsule to reach a set of physics objectives prescribed by the designer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility

A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. Here, this study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.

Physics↗

Proton damage in (Y,Lu,Gd) 3 (Al,Ga) 5 O 12 :Ce mixed garnet scintillators

Scintillators are vital components for nuclear instrumentation and its applications, including plasma diagnostics and imaging. As yields in controlled fusion experiments increase, the radiation tolerance of scintillator candidates for use in instrumentation is of particular importance. High radiation exposure can damage scintillating materials and alter the optical properties. The effects of radiation damage in Ce-doped mixed garnet ceramics over the compositional range (Y,Gd,Lu) 3 (Al,Ga) 5 O 12 are investigated using optical techniques. The samples were exposed to 200 keV protons to an accumulated fluence of 10 16 protons per square centimeter, then characterized using diffuse reflectance spectroscopy (DRS). DRS with visible light can assess the radiation tolerance of opaque poly-crystalline samples, which can be easily sintered from powders and thus offer distinct advantages in characterization compared to single crystals. Qualitative trends in induced absorption are presented as a function of composition, and the ideal cerium dopant concentration for Y 2 LuAl 5 O 12 is determined to be 0.60–0.75 mol.%.

47 OTHER INSTRUMENTATION↗

Beryllium–tungsten graded density inner shells in double shell capsules for improved hydrodynamic stability

The outer surface of the high-Z inner shell in the double shell configuration of inertial confinement fusion experiments experiences Rayleigh–Taylor instability growth during the implosion process due to inverted density and pressure gradients between a highly compressed foam interstitial layer and the accelerating dense inner shell. Graded density layers have long been known to reduce instability growth rates. In this study, we employ high-fidelity radiation hydrodynamic simulations to demonstrate this improved stability when grading beryllium into tungsten. We first characterize the response to L-band preheat of these layers using a newly calibrated radiation drive. While graded layer capsules suffer reduced performance (here, measured as DD neutron yield from a CD foam fuel) in 1D simulations due to reduced kinetic energy coupling and reduced fuel compression, they suffer less of a performance drop when 2D instabilities are accounted for. With the improved stability of graded layers, we explore the performance of capsules with larger fuel radii and thinner shells as a preliminary study to find new designs in which graded layers produce the highest yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Augmenting machine learning of Grad–Shafranov equilibrium reconstruction with Green's functions

This work presents a method for predicting plasma equilibria in tokamak fusion experiments and reactors. The approach involves representing the plasma current as a linear combination of basis functions using principal component analysis of plasma toroidal current densities (J t ) from the EFIT-AI equilibrium database. Then utilizing EFIT's Green's function tables, basis functions are created for the poloidal flux (ψ) and diagnostics generated from the toroidal current (J t ). Similar to the idea of a physics-informed neural network (NN), this physically enforces consistency between ψ, J t , and the synthetic diagnostics. First, the predictive capability of a least squares technique to minimize the error on the synthetic diagnostics is employed. The results show that the method achieves high accuracy in predicting ψ and moderate accuracy in predicting J t with median R 2 = 0.9993 and R 2 = 0.978, respectively. A comprehensive NN using a network architecture search is also employed to predict the coefficients of the basis functions. The NN demonstrates significantly better performance compared to the least squares method with median R 2 = 0.9997 and 0.9916 for J t and ψ, respectively. The robustness of the method is evaluated by handling missing or incorrect data through the least squares filling of missing data, which shows that the NN prediction remains strong even with a reduced number of diagnostics. Additionally, the method is tested on plasmas outside of the training range showing reasonable results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metaplectic geometrical optics for ray-based modeling of caustics: Theory and algorithms

The optimization of radio frequency-wave (RF) systems for fusion experiments is often performed using ray-tracing codes, which rely on the geometrical-optics (GO) approximation. However, GO fails at caustics such as cutoffs and focal points, erroneously predicting the wave intensity to be infinite. This is a critical shortcoming of GO, since the caustic wave intensity is often the quantity of interest, e.g., RF heating. Full-wave modeling can be used instead, but the computational cost limits the speed at which such optimizations can be performed. Here, we have developed a less expensive alternative called metaplectic geometrical optics (MGO). Instead of evolving waves in the usual x (coordinate) or k (spectral) representation, MGO uses a mixed X$\equiv$Ax+Bk representation. By continuously adjusting the matrix coefficients A and B along the rays, one can ensure that GO remains valid in the X coordinates without caustic singularities. The caustic-free result is then mapped back onto the original x space using metaplectic transforms. Here, we overview the MGO theory and review algorithms that will aid the development of an MGO-based ray-tracing code. We show how using orthosymplectic transformations leads to considerable simplifications compared to previously published MGO formulas. We also prove explicitly that MGO exactly reproduces standard GO when evaluated far from caustics (an important property that until now has only been inferred from numerical simulations), and we relate MGO to other semiclassical caustic-removal schemes published in the literature. Finally this discussion is then augmented by an explicit comparison of the computed spectrum for a wave bounded between two cutoffs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of cross-beam energy transfer to control drive symmetry in ICF implosions in low gas fill Hohlraums at the National Ignition Facility

Cross beam energy transfer (CBET), invoked by setting a wavelength difference, Δλ, between inner and outer beam cones, can be used to increase the drive on the waist in indirectly driven inertial confinement fusion experiments at the National Ignition Facility (NIF). Historically, hot spot symmetry control in capsule implosions in high (≥0.9 mg/cm 3 4 He) gas fill Hohlraums was enabled by substantial CBET. However, these implosion designs suffered from inflight symmetry swings, high SRS backscatter on the inner cones, and significant hot electron generation posing a threat to DT fuel preheat. Subsequent experiments in larger, low (≤0.6 mg/cm 3 4 He) gas fill Hohlraums demonstrated round implosions by varying the inner cone fraction throughout the laser drive at Δλ = 0 Å while keeping backscatter and hot electron generation very low. To enable driving larger capsules at a given Hohlraum size, additional tools for implosion symmetry control are required. With this goal in mind, here we present a detailed experimental study of using CBET in low gas fill Hohlraums near NIF's current peak power capability. We find a ~2.5× higher sensitivity of the P 2 Legendre mode with respect to Δλ changes compared to that of high gas fill designs. We attribute this observation to the fact that backscatter remains very low and that CBET remains in a linear regime, as suggested by simulations. As a result, a much smaller Δλ of order 1 Å is sufficient for sustaining implosion symmetry while keeping laser-to- Hohlraum coupling high and hot electron generation very low. While this study used plastic ablator capsules, our findings can be generalized to other ablator materials and, hence, show great promise for using wavelength detuning as a strong lever for implosion symmetry control in future low gas fill designs that require smaller case to capsule ratios in order to increase the energy coupled to the capsule.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Technical Report -- Bridging the PSI Knowledge Gap: A Multiscale Approach

The Plasma Surface Interactions (PSI) Science Center formed by the grant undertook a multidisciplinary set of studies on the complex interface between the plasma and solid states of matter. The strategy of the center was to combine and integrate the experimental, diagnostic and modeling toolkits from multiple institutions towards specific PSI problems. In this way the Center could tackle integrated science issues which were not addressable by single institutions, as well as evolve the underlying science of the PSI in a more general way than just for fusion applications. The overall strategy proved very successful. The research result and highlights of the MIT portion of the Center are primarily described. A particular highlight is the study of tungsten nano-tendril growth in the presence of helium plasmas. The Center research provided valuable new insights to the mechanisms controlling the nano-tendrils by developing coupled modeling and in situ diagnostic methods which could be directly compared. For example, the role of helium accumulation in tungsten distortion in the surface was followed with unique in situ helium concentration diagnostics developed. These depth-profiled, time-resolved helium concentration measurements continue to challenge the numerical models of nano-tendrils. The Center team also combined its expertise on tungsten nano-tendrils to demonstrate for the first time the growth of the tendrils in a fusion environment on the Alcator C-Mod fusion experiment, thus having significant impact on the broader fusion research effort. A new form of isolated nano-tendril “columns” were identified which are now being used to understand the underlying mechanisms controlling the tendril growth. The Center also advanced PSI science on a broader front with a particular emphasis on developing a wide range of in situ PSI diagnostic tools at the DIONISOS facility at MIT. For example the strong suppression of sputtering by the certain combination of light-species plasmas and metals was experimentally studied with independent measurement methods across the Center. This surprising result challenges the universal use of the binary-collision approximation in sputtering predictions and continues to be the subject of study. In order to address this issue MIT developed a new in situ erosion measurement technique based on ion beam analysis which can be used at elevated material temperatures. This exciting new technique is now being used to study material erosion in high performance plasma thrusters for space exploration and is being adopted to fusion experimental devices. This is an indicator of the positive synergies that arise from such a Center, with the research having impact beyond the initial area of study. The Center also served successfully as an organizing force for communication to the science community. The MIT members of the Center provided many high-profile overview presentations at prestigious international conferences and national workshops. The research resulted in three student theses and 24 peer-reviewed publications. PSI research continues to be identified as a critical area for fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Operating Experience Review of Tritium-in-Water Monitors

Monitoring tritium facility and fusion experiment effluent streams is an environmental safety requirement. This paper presents data on the operating experience of a solid scintillant monitor for tritium in effluent water. Operating experiences were used to calculate an average monitor failure rate of 4E-05/hour for failure to function. Maintenance experiences were examined to find the active repair time for this type of monitor, which varied from 22 minutes for filter replacement to 11 days of downtime while waiting for spare parts to arrive on site. These data support planning for monitor use; the number of monitors needed, allocating technician time for maintenance, inventories of spare parts, and other issues.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal choice of multiple line-of-sight measurements determining plasma hotspot velocity at the National Ignition Facility

The measurement of plasma hotspot velocity provides an important diagnostic of implosion performance for inertial confinement fusion experiments at the National Ignition Facility. The shift of the fusion product neutron mean kinetic energy as measured along multiple line-of-sight time-of-flight spectrometers provides velocity vector components from which the hotspot velocity is inferred. Multiple measurements improve the hotspot velocity inference; however, practical considerations of available space, operational overhead, and instrumentation costs limit the number of possible line-of-sight measurements. Here, we propose a solution to this classical “experiment design” problem that optimizes the precision of the velocity inference for a limited number of measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of mass ablation on ignition and burn propagation in layered fusion capsules

After decades of research, recent laser-driven inertial fusion experiments have demonstrated rapid progress toward achieving thermonuclear ignition using capsule designs with cryogenic fuel layers. The ignition physics for these layered capsules involves a complex interplay between the dynamically forming hot spot and the dense surrounding fuel. Using analytic theory and numerical simulations, we demonstrate that the mass ablation rate into the hot spot depends sensitively upon the temperature of the dense fuel, resulting in ablative inflows up to [Formula: see text] faster than previous estimates. This produces an enthalpy flux into the hot spot that plays a critical role in controlling the hot spot temperature, the ignition threshold, and the subsequent burn propagation. The net influence of mass ablation on the ignition threshold is regulated by a dimensionless parameter that depends upon the temperature of the dense fuel. As a consequence, the ignition threshold is sensitive to any mechanism that heats the dense fuel, such as neutrons or radiation emitted from the hot spot. These predictions are confirmed using radiation-hydrodynamic simulations for a series of capsules near ignition conditions. This analysis may have relevance for understanding the variable performance of recent experiments and for guiding new capsule designs toward higher fusion yields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatial Profile and Beam Composition Measurements of the University of Wisconsin Inertial Electrostatic Confinement Laboratory Ion Guns

A custom designed and manufactured set of ion guns has been in use at the University of Wisconsin Inertial Electrostatic Confinement Laboratory for both beam fusion experiments and materials implantation experiments. For the first time, direct measurements have been made on the spatial profiles and the mass compositions of He and D ion beams produced by these guns. The results validate assumptions about the circular Gaussian spatial profiles for both He and D ion beams. Mass composition measurements of the He beam identified a pressure-dependent minimum impurity content of 15% N + . The D beam contained relative molecular ion fractions of 58% D 3 + , 32% D 2 + , and 10% D + with impurities of 15% to 20% D 2 O + . Finally, a new experimental platform, the Ion Beam and Source Analyzer was developed to perform these experiments on the ion guns used to irradiate candidate fusion materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analytic, empirical and delta method temperature derivatives of D-D and D-T fusion reactivity formulations, as a means of verification

We examine the derivatives with respect to temperature, for various deuterium-tritium (DT) and deuterium-deuterium (D-D) fusion-reactivity formulations. Langenbrunner and Makaruk [1] had studied this as a means of understanding the time and temperature domain of reaction history measured in dynamic fusion experiments. Presently, we consider the temperature derivative dependence of fusion reactivity as a means of exercising and verifying the consistency of the various reactivity formulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low Level Neutron Spectroscopy

Although the most sought-after hot plasma fusion reactions use deuterium-tritium due to its higher fusion cross-section, the deuteron-deuteron fusion reaction is also used and is suspected in Low Energy Nuclear Reactions (LENR). Although LENR reactions are largely aneutronic, the D(d,n)3He reaction produces a 2.45 MeV kinetic energy neutron. In the course of fusion experiments at NASA, ranging from bremsstrahlung photoneutron-initiated fusion to Pd/D co-deposition, we’ve made use of liquid and solid neutron scintillator spectrometers, bubble detectors and Solid State Nuclear Track Detectors (CR-39). We have observed the unfolded neutron energy spectrum from primary fusion and boosted fusion or stripped neutrons from photoneutron induced fusion. Despite an average deuteron energy of 64 keV, the peak unfolded neutron flux was only a few neutrons/minute. The major problem was the 10e14vgamma ray/neutrons/second flux ratio.

Neutron spectroscopy↗

Study of the properties of thin Li films and their relationship with He plasmas using ion beam analysis in the DIONISOS experiment

Plasma facing component (PFC) conditioning dramatically affects plasma performance in magnetic confinement fusion experiments. Lithium (Li) has been used in several machines to condition PFC with subsequent improvements to plasma performance. Multiple studies have investigated the interactions of Li with deuterium (D) and oxygen (O) in order to ascertain the mechanisms behind the enhanced plasma performance. Ion Beam Analysis (IBA) is a useful tool to interrogate PFC surfaces as they interact with plasmas. Dynamics of ion implantation and sputtering of surfaces (DIONISOS) is a linear plasma device, capable of generating discharges with fluxes ~10 21 m -2 s -1 and Te ~6 eV, coupled to an ion accelerator. DIONISOS is capable of analyzing samples using Elastic Recoil Detection (ERD) and Rutherford Backscattering Spectroscopy (RBS) during plasma exposures. The facility has been equipped with a Li deposition system for evaporation of thin coatings on different substrates. The evaporator enables real time ERD and RBS measurements of deposition and erosion of Li coatings on different substrates and the interaction of the Li with the vacuum and plasma. Considerations for ERD, e.g., ion species, energy, and data acquisition frequency, are presented. Furthermore, this work is the basis for further investigation of He, H, and D retention in solid and liquid Li.

47 OTHER INSTRUMENTATION↗