SEARCH · Search NASA

Results for “habitats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Evaluating Extravehicular Activity Access Options for a Lunar Surface Habitat

NASA’s upcoming return to the moon includes a plan for longer duration lunar missions that prioritize science and surface exploration. The current Artemis Base Camp reference proposes a Surface Habitat (SH) that will support 2 to 4 crewmembers with adequate capability for living and working for 30 days or more. An important aspect of the SH’s design will be its ability to support a high frequency of Extravehicular Activities (EVAs) for scientific purposes. There are multiple airlock designs that can support EVA access from inside the SH out to the lunar surface. This paper explores three unique options for EVA access: a traditional airlock, a suitlock, and a suitport-airlock.A traditional airlock is accessed by use of a hatch, crewmembers don and doff their EVA suits inside the airlock, and it must be depressurized and repressurized for every EVA. A suitlock is also depressurized and repressurized for every EVA but thesuits are donned through a suitport attached to the airlock bulkhead. A suitport-airlock is access through suitports that are attached to the airlock bulkhead as well, but the suitport-airlock stays in vacuum, and it does not have to be depressurized and repressurized for each EVA. This study also evaluated the use of an Airlock Airsave System in the cases of a traditional airlock and suitlock. This system captures a fraction of the airlock gas instead of venting all of the gas pre-EVA. The captured gas isthen used to partially repressurize the airlock post-EVA.In this study, each option is evaluated based on seven different areas of analysis. The metrics include overhead time for EVAs, dust mitigation, consumables for resupply mass, systems mass, system power, safety and mission assurances, and programmatic considerations. The EVA access options are evaluated and compared under each area of analysis. While the baseline case assumes the SH is at 8.2 psia, the authors also investigate the impact of a 10.2 psia habitat as an alternative in this analysis. Following the conclusion of the analysis, the authors recommend the usage of a Suitport-Airlock for Lunar SH missions and detail the reasoning behind the recommendation.

EVA↗

NASA NTRSDate not supplied

Baseline Assumptions and Ersatz Waste Streams for Partial Gravity Habitats with Mobile Female and Male Crew

Effective and reliable water management and recovery systems will be required to sup-port human missions beyond the low Earth orbit (LEO) of the International Space Station (ISS). Lunar and Mars surface missions will introduce new challenges to managing water and associated waste streams from mobile crew members who will be living in up to six shelters in extreme environmental conditions under a range of gravity conditions. A review of baseline assumptions for the human activities and associated air and water cycles in and between the transit vehicle, orbiting station, lander-ascent vehicle, surface habitat, pressurized rover, and suits is conducted. The paper reviews ersatz formulations and water flow rates for the main liquid water waste streams of urine, humidity condensate, hygiene, and laundry. Emphasis is placed on the metabolic emissions partitioning between the six habitat elements and the lunar exosphere during a design reference mission scenario.

Water Ersatz Habitat↗

NASA NTRSDate not supplied

Evaluating Extravehicular Activity Access Options for a Lunar Surface Habitat

NASA’s upcoming return to the moon includes a plan for longer duration lunar missions that prioritize science and surface exploration. The current Artemis Base Camp reference proposes a Surface Habitat (SH) that will support 2 to 4 crewmembers with adequate capability for living and working for 30 days or more. An important aspect of the SH’s design will be its ability to support a high frequency of Extravehicular Activities (EVAs) for scientific purposes. There are multiple airlock designs that can support EVA access from inside the SH out to the lunar surface. This paper explores three unique options for EVA access: a traditional airlock, a suitlock, and a suitport-airlock. A traditional airlock is accessed by use of a hatch, crewmembers don and doff their EVA suits inside the airlock, and it must be depressurized and repressurized for every EVA. A suitlock is also depressurized and repressurized for every EVA but the suits are donned through a suitport attached to the airlock bulkhead. A suitport-airlock is accessed through suitports that are attached to the airlock bulkhead as well, but the suitport-airlock stays in vacuum, and it does not have to be depressurized and repressurized for each EVA. This study also evaluated the use of an Airlock Airsave System in the cases of a traditional airlock and suitlock. This system captures a fraction of the airlock gas instead of venting all of the gas pre-EVA. The captured gas is then used to partially repressurize the airlock post-EVA. In this study, each option is evaluated based on seven different areas of analysis. The metrics include overhead time for EVAs, dust mitigation, consumables for resupply mass, systems mass, system power, safety and mission assurances, and programmatic considerations. The EVA access options are evaluated and compared under each area of analysis. While the baseline case assumes the SH is at 8.2 psia, the authors also investigate the impact of a 10.2 psia habitat as an alternative in this analysis. Following the conclusion of the analysis, the authors recommend the usage of a Suitport-Airlock for Lunar SH missions and detail the reasoning behind the recommendation.

EVA↗

NASA NTRSDate not supplied

Process Development and Testing for Lunar Habitats

Non-metallic solutions for Lunar bases are appealing due to their light weight and ability to block many forms of radiation. Composite materials made from different combinations of these non-metallic materials enable effective mating of dissimilar materials for strong structures such as pressurized habitats. Inserting and manufacturing composite structural materials on the Moon presents several challenges, however: the oxygen levels inside pressurized habitats will be relatively high, radiation that is blocked causes damage and the lack of atmosphere results in a high-magnitude negative pressure environment. In the past two years, the Materials and Processes Lab (EM01) invested in two internal research and development (IRAD) proposals for testing and procurement of composite materials. One proposal endeavors to determine flammability and radiation damage of various composite materials with a focus on carbon fiber and ultra-high molecular weight polyethylene (UHWMPE). The other proposal enables procurement of chopped fiber spray equipment materials which will be used to develop a novel technique for chopped UHMWPE fiber layup, similar to the chopped fiberglass layups used for making large structures such a boat hulls and hot tubs.

Composite↗

NASA NTRSDate not supplied

Baseline Assumptions and Ersatz Waste Streams for Partial Gravity Habitats with Mobile Female and Male Crew

Water Ersatz Habitat↗

NASA NTRSDate not supplied

Inflatable Habitat Testing Capabilities at MSFC

Since early 2022 Marshall Space Flight Center’s (MSFC) Test Lab (ET) has been the premier inflatable habitat testing organization for NASA. In the past two years the Center has strategically invested in this thriving business unit; bringing to life four distinct facilities and a dozen unique capabilities. The Center has been successful in partnering with companies developing softgoods architectures and has already executed several test campaigns for them. This poster gives an overview of the Test Lab’s capabilities and the facilities used for inflatable habitat testing.

Inflatable↗

NASA NTRS2025

Transit Habitat Government-Reference Conceptual Design Reaction Control System Propulsion Concept Design Data Book

The function of Transit Habitat (TH) Reaction Control System (RCS) propulsion is to provide free-flying spacecraft capabilities and to augment Gateway stack control when docked on Gateway. The requirements of multiple propellant replenishments and extensive life operation have significant impacts on selection of the propulsion system concept and components for the RCS. The intent of this document is to provide insight into the government-reference conceptual design of a propulsion system for TH element. A pressure-fed hypergolic bi-propellant system is the assumed propulsion approach for the RCS. Its architectural concept is being traded within the NASA Moon to Mars architecture. A pressure-regulated system is examined. The propellants under consideration are Monomethyl Hydrazine (MMH) and Mixed Oxides of Nitrogen with 3% Nitric Oxide (MON3). A peer review was conducted to assess the flow schematic design and propulsion component selection, compliant with a set of assumed requirements. Redundant components to satisfy one-fault tolerance for function and two-fault tolerance against catastrophic events are incorporated in the propulsion concept design. Instrumentation laid out on the schematic would be used to gather data to monitor the health of the propulsion system and to support quantity gauging of the propulsion system fluids. Venting propellant ullage gas overboard during the refilling operations poses a significant concern to the external surfaces of the TH. A liquid/gas separator would be required to eliminate, or at least reduce, the amount of liquid propellant expelled in the vent gas mixture. The technology readiness level of the phase separator for the TH must be advanced. Metal diaphragm and non-positive-expulsion PMD propellant tank systems were traded against each other, with the PMD architecture being selected. A blowdown concept is also considered for the TH RCS propulsion. Its fluid schematic is derived from the pressure-regulated schematic with removal of assemblies involving the helium pressurization and ullage venting. Its system wet mass is 10% heavier than the pressure-regulated due to thruster performance loss and larger propellant tanks. There is no firm constraint on the propulsion system mass at this phase of the design. The blowdown concept can offer reduction in component count and operation, that would lead to a more reliable propulsion system. The blowdown concept would also benefit avionics, thermal, power, and structures on the TH. Assessing these benefits will be carried as a future work. Drawbacks of thrust and minimum impulse bit (MIB) variations due to the blowdown operation would be acceptable to Guidance, Navigation, and Control (GNC). Although the blowdown concept has been selected as a current baseline, further evaluation of the concept will be the subject of future work to ensure that the blowdown propulsion operation is appropriate for the HT RCS propulsion. This document also highlights key trade studies and design decisions, including pros and cons of the selected concept. Other appropriate options for components are pointed out for future assessments. Additional background information and documents for further review are referenced in this report.

spacecraft propulsion↗

NASA NTRS1974

An evaluation of the use of ERTS-1 satellite imagery for grizzly bear habitat analysis

Improved classification and mapping of grizzly habitat will permit better estimates of population density and distribution, and allow accurate evaluation of the potential effects of changes in land use, hunting regulation, and management policies on existing populations. Methods of identifying favorable habitat from ERTS-1 multispectral scanner imagery were investigated and described. This technique could reduce the time and effort required to classify large wilderness areas in the Western United States.

Varney, J. R.↗

NASA NTRS1973

Evaluation of an artificial estuarine habitat-initial stage

In order to study the influence of an artificial habitat of discarded automobile tires upon the biomass in and around it, three sites were selected in the Banana River of which two will contain small groups of tires and one will not. Over a given period, the populations in and around the tires will be compared with those which existed initially or prevail on the natural site. Preliminary observations indicate that adequate numbers may be present in the lower trophic levels but that there are perhaps inadequate populations of upper level carnivores which it appears can be increased by an artificial habitat.

Poonai, P.↗

NASA NTRS1974

Utilization of ERTS-1 for appraising changes in continental migratory bird habitat

The author has identified the following significant results. Information on numbers, distribution, and quality of wetlands in the breeding range of migratory waterfowl is important for the management of this wildlife resource. Using computer processing of data gathered by the ERTS-1 multispectral scanner, techniques for obtaining indices of annual waterfowl recruitment, and habitat quality are examined. As a primary task, thematic maps and statistics relating to open surface water were produced. Discrimination of water was based upon water's low apparent radiance in a single, near-infrared waveband. An advanced technique using multispectral information for discerning open water at a level of detail finer than the virtual resolution of the data was also successfully tested. In another related task, vegetation indicators were used for detecting conditions of latent or occluded water and upland habitat characteristics.

Gilmer, D. S.↗

NASA NTRS1978

Space habitats

Differences between space industrialization and space colonization are outlined along with the physiological, psychological, and esthetic needs of the inhabitants of a space habitat. The detrimental effects of zero gravity on human physiology are reviewed, and the necessity of providing artificial gravity, an acceptable atmosphere, and comfortable relative humidity and temperature in a space habitat is discussed. Consideration is also given to social organization and governance, supply of food and water, and design criteria for space colonies.

Johnson, R. D.↗

NASA NTRS1978

Developing closed life support systems for large space habitats

In anticipation of possible large-scale, long-duration space missions which may be conducted in the future, NASA has begun to investigate the research and technology development requirements to create life support systems for large space habitats. An analysis suggests the feasibility of a regeneration of food in missions which exceed four years duration. Regeneration of food in space may be justified for missions of shorter duration when large crews must be supported at remote sites such as lunar bases and space manufacturing facilities. It is thought that biological components consisting principally of traditional crop and livestock species will prove to be the most acceptable means of closing the food cycle. A description is presented of the preliminary results of a study of potential biological components for large space habitats. Attention is given to controlled ecosystems, Russian life support system research, controlled-environment agriculture, and the social aspects of the life-support system.

Phillips, J. M.↗

NASA NTRS1979

Food technology in space habitats

The research required to develop a system that will provide for acceptable, nutritious, and safe diets for man during extended space missions is discussed. The development of a food technology system for space habitats capable of converting raw materials produced in the space habitats into acceptable food is examined.

Karel, M.↗

NASA NTRS1981

Microbial ecology of extreme environments: Antarctic dry valley yeasts and growth in substrate limited habitats

The multiple stresses temperature, moisture, and for chemoheterotrophs, sources of carbon and energy of the Dry Valley Antarctica soils allow at best depauperate communities, low in species diversity and population density. The nature of community structure, the operation of biogeochemical cycles, the evolution and mechanisms of adaptation to this habitat are of interest in informing speculations upon life on other planets as well as in modeling the limits of gene life. Yeasts of the Cryptococcus vishniacil complex (Basidiobiastomycetes) are investigated, as the only known indigenes of the most hostile, lichen free, parts of the Dry Valleys. Methods were developed for isolating these yeasts (methods which do not exclude the recovery of other microbiota). The definition of the complex was refined and the importance of nitrogen sources was established as well as substrate competition in fitness to the Dry Valley habitats.

Vishniac, H. S.↗

NASA NTRS1982

Mapping of wildlife habitat in Farmington Bay, Utah

Mapping was accomplished through the interpretation of high-altitude color infrared photography. The feasibility of utilizing LANDSAT digital data to augment the analysis was explored; complex patterns of wildlife habitat and confusion of spectral classes resulted in the decision to make limited use of LANDSAT data in the analysis. The final product is a map which delineates wildlife habitat at a scale of 1:24,000. The map is registered to and printed on a screened U.S.G.S. quadrangle base map. Screened delineations of shoreline contours, mapped from a previous study, are also shown on the map. Intensive field checking of the map was accomplished for the Farmington Bay Waterfowl Management Area in August 1981; other areas on the map received only spot field checking.

Jaynes, R. A.↗

NASA NTRS1982

The use of large-scale aerial photography for interpreting Landsat digital data in an elk habitat-analysis project

Large-scale aerial photography was used to interpret Landsat multispectral scanner data processed through an unsupervised classifier. After scale adjustment and interpretation by application of an elk-habitat photointerpretation legend, the photographs were registered with the spectral classification, and the co-occurrence of spectral picture elements with photointerpreted habitat classes was tabulated. Analysis of the resulting table of data permitted the description of spectral classes in terms meaningful and useful to elk research and management unit in the Blue Mountains of northeastern Oregon.

Isaacson, D. L.↗

NASA NTRS1981

Wildlife habitat evaluation demonstration project

To support the deer range improvement project in Michigan, the capability of LANDSAT data in assessing deer habitat in terms of areas and mixes of species and age classes of vegetation is being examined to determine whether such data could substitute for traditional cover type information sources. A second goal of the demonstration project is to determine whether LANDSAT data can be used to supplement and improve the information normally used for making deer habitat management decisions, either by providing vegetative cover for private land or by providing information about the interspersion and juxtaposition of valuable vegetative cover types. The procedure to be used for evaluating in LANDSAT data of the Lake County test site is described.

Burgoyne, G. E., Jr.↗

NASA NTRS1983

Riparian habitat on the Humboldt River, Deeth to Elko, Nevada

A map inventory of the major habitat types existing along the Humbolt River riparian zone in Nevada is described. Through aerialphotography, 16 riparian habitats are mapped that describe the ecological relationships between soil and vegetation types, flooding and soil erosion, and the various management practices employed to date. The specific land and water management techniques and their impact on the environment are considered.

Price, K. P.↗