Search NASA⌕ Search

SEARCH · Search NASA

Results for “hardware complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Noninvasive Diagnosis of Coronary Artery Disease Using 12-Lead High-Frequency Electrocardiograms

A noninvasive, sensitive method of diagnosing certain pathological conditions of the human heart involves computational processing of digitized electrocardiographic (ECG) signals acquired from a patient at all 12 conventional ECG electrode positions. In the processing, attention is focused on low-amplitude, high-frequency components of those portions of the ECG signals known in the art as QRS complexes. The unique contribution of this method lies in the utilization of signal features and combinations of signal features from various combinations of electrode positions, not reported previously, that have been found to be helpful in diagnosing coronary artery disease and such related pathological conditions as myocardial ischemia, myocardial infarction, and congestive heart failure. The electronic hardware and software used to acquire the QRS complexes and perform some preliminary analyses of their high-frequency components were summarized in Real-Time, High-Frequency QRS Electrocardiograph (MSC- 23154), NASA Tech Briefs, Vol. 27, No. 7 (July 2003), pp. 26-28. To recapitulate, signals from standard electrocardiograph electrodes are preamplified, then digitized at a sampling rate of 1,000 Hz, then analyzed by the software that detects R waves and QRS complexes and analyzes them from several perspectives. The software includes provisions for averaging signals over multiple beats and for special-purpose nonrecursive digital filters with specific low- and high-frequency cutoffs. These filters, applied to the averaged signal, effect a band-pass operation in the frequency range from 150 to 250 Hz. The output of the bandpass filter is the desired high-frequency QRS signal. Further processing is then performed in real time to obtain the beat-to-beat root mean square (RMS) voltage amplitude of the filtered signal, certain variations of the RMS voltage, and such standard measures as the heart rate and R-R interval at any given time. A key signal feature analyzed in the present method is the presence versus the absence of reduced-amplitude zones (RAZs). In terms that must be simplified for the sake of brevity, an RAZ comprises several cycles of a high-frequency QRS signal during which the amplitude of the high-frequency oscillation in a portion of the signal is abnormally low (see figure). A given signal sample exhibiting an interval of reduced amplitude may or may not be classified as an RAZ, depending on quantitative criteria regarding peaks and troughs within the reduced-amplitude portion of the high-frequency QRS signal. This analysis is performed in all 12 leads in real time.

Schlegel, Todd T.↗
NASA NTRS2006

Universal Controller for Spacecraft Mechanisms

An electronic control unit has been fabricated and tested that can be replicated as a universal interface between the electronic infrastructure of a spacecraft and a brushless-motor (or other electromechanical actuator) driven mechanism that performs a specific mechanical function within the overall spacecraft system. The unit includes interfaces to a variety of spacecraft sensors, power outputs, and has selectable actuator control parameters making the assembly a mechanism controller. Several control topologies are selectable and reconfigurable at any time. This allows the same actuator to perform different functions during the mission life of the spacecraft. The unit includes complementary metal oxide/semiconductor electronic components on a circuit board of a type called rigid flex (signifying flexible printed wiring along with a rigid substrate). The rigid flex board is folded to make the unit fit into a housing on the back of a motor. The assembly has redundant critical interfaces, allowing the controller to perform time-critical operations when no human interface with the hardware is possible. The controller is designed to function over a wide temperature range without the need for thermal control, including withstanding significant thermal cycling, making it usable in nearly all environments that spacecraft or landers will endure. A prototype has withstood 1,500 thermal cycles between 120 and +85 C without significant deterioration of its packaging or electronic function. Because there is no need for thermal control and the unit is addressed through a serial bus interface, the cabling and other system hardware are substantially reduced in quantity and complexity, with corresponding reductions in overall spacecraft mass and cost.

Levanas, Greg↗
NASA NTRS2010

International Space Station Mechanisms and Maintenance Flight Control Documentation and Training Development

International Space Station (ISS) crew and flight controller training documentation is used to aid in training operations. The Generic Simulations References SharePoint (Gen Sim) site is a database used as an aid during flight simulations. The Gen Sim site is used to make individual mission segment timelines, data, and flight information easily accessible to instructors. The Waste and Hygiene Compartment (WHC) training schematic includes simple and complex fluid schematics, as well as overall hardware locations. It is used as a teaching aid during WHC lessons for both ISS crew and flight controllers. ISS flight control documentation is used to support all aspects of ISS mission operations. The Quick Look Database and Consolidated Tool Page are imagery-based references used in real-time to help the Operations Support Officer (OSO) find data faster and improve discussions with the Flight Director and Capsule Communicator (CAPCOM). A Quick Look page was created for the Permanent Multipurpose Module (PMM) by locating photos of the module interior, labeling specific hardware, and organizing them in schematic form to match the layout of the PMM interior. A Tool Page was created for the Maintenance Work Area (MWA) by gathering images, detailed drawings, safety information, procedures, certifications, demonstration videos, and general facts of each MWA component and displaying them in an easily accessible and consistent format. Participation in ISS mechanisms and maintenance lessons, mission simulation On-the-Job Training (OJT), and real-time flight OJT was used as an opportunity to train for day-to-day operations as an OSO, as well as learn how to effectively respond to failures and emergencies during mission simulations and real-time flight operations.

Daugherty, Colin C.↗
NASA NTRS2011

Experimental and Numerical Investigation of Reduced Gravity Fluid Slosh Dynamics for the Characterization of Cryogenic Launch and Space Vehicle Propellants

As space programs increasingly investigate various options for long duration space missions the accurate prediction of propellant behavior over long periods of time in microgravity environment has become increasingly imperative. This has driven the development of a detailed, physics-based understanding of slosh behavior of cryogenic propellants over a range of conditions and environments that are relevant for rocket and space storage applications. Recent advancements in computational fluid dynamics (CFD) models and hardware capabilities have enabled the modeling of complex fluid behavior in microgravity environment. Historically, launch vehicles with moderate duration upper stage coast periods have contained very limited instrumentation to quantify propellant stratification and boil-off in these environments, thus the ability to benchmark these complex computational models is of great consequence. To benchmark enhanced CFD models, recent work focuses on establishing an extensive experimental database of liquid slosh under a wide range of relevant conditions. In addition, a mass gauging system specifically designed to provide high fidelity measurements for both liquid stratification and liquid/ullage position in a micro-gravity environment has been developed. This pUblication will summarize the various experimental programs established to produce this comprehensive database and unique flight measurement techniques.

Walls, Laurie K.↗
NASA NTRSDate not supplied

NASA Glenn Engine Control Research Facilities

This document describes NASA Glenn facilities available for performing propulsion control work. This includes a real-time hardware in the loop facility for performing complex, multi-rate simulations. The second facility describes a small engine test stand with a modifiable controller for performing advanced control studies and/or testing engine system modifications.

Control Systems↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four crew evaluations on prototypes for the different LOO hardware. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four crew evaluations on prototypes for the different LOO hardware. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRSDate not supplied

Self-consistent Quantum Iteratively Sparsified Hamiltonian Algorithm (SQuISH)

Due to coherence time limitations, reducing the resources required to run quantum algorithms and simulate physical systems on a quantum computer is crucial. With regards to Hamiltonian simulation, a significant effort has focused on building efficient algorithms using various factorizations and truncations, typically derived from the Hamiltonian alone. We introduce a new paradigm for improving Hamiltonian simulation and reducing the cost of ground state problems based on ideas recently developed for classical chemistry simulations. The key idea is that one can find efficient ways to reduce resources needed by quantum algorithms by making use of two key pieces of information: the Hamiltonian operator and an approximate ground state wavefunction. We refer to our algorithm as the self-consistent quantum iteratively sparsified Hamiltonian (SQuISH). By performing our scheme iteratively, one can drive SQuISH to create an accurate wavefunction using a truncated, resource-efficient Hamiltonian. By utilizing this more compact Hamiltonian, our algorithm provides an approach to reduce the gate complexity of ground state calculations on quantum hardware. As proof of principle, we implement SQuISH using configuration interaction for small molecules and coupled cluster for larger systems. Through our combination of approaches, we demonstrate how it performs on a range of systems, the largest of which would require more than 200 qubits to run on quantum hardware.

Diana Chamaki↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four rounds of crew evaluations with multiple crewmembers on prototypes for the different LOO subsystems. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
NASA NTRSDate not supplied

Hybrid-Electric Aero-Propulsion Controls Testbed Results with Energy Storage

Electrified aircraft propulsion (EAP) research is a priority of the National Aeronautics and Space Administration (NASA) for its potential to increase propulsion system efficiency, performance, and operability at the subsystem and vehicle levels while decreasing emissions. These EAP systems demand more advanced control algorithms due to increased complexity. NASA has developed a reconfigurable, hardware-in-the-loop rig to verify control algorithm performance using a sub-scale electro-mechanical system. A novel capability of this rig is the ability to test full scale EAP control algorithms on a sub-scale representation of the electro-mechanical system without turbomachinery/rotors. A novel feature is the use of a physical energy storage device within the electro-mechanical system. A dual spool, parallel hybrid-electric turbofan architecture and energy management control system is tested with the goal of verifying the ability to obtain turbomachinery model operability benefits while controlling sub-scale electro-mechanical hardware. Pre-test predictions of the turbofan model, control, and rig performance were obtained through simulation using a software model of the rig. Theoretical results showing the true performance of the turbofan model were obtained through a software simulation using full-scale mechanical shaft models. The paper compares theoretical, predicted, and actual test results from the turbofan model, energy management control and rig perspectives. The results show that the presence of sub-scale electro-mechanical hardware did not inhibit the energy management algorithm from achieving turbomachinery operability benefits.

hybrid↗
NASA NTRSDate not supplied

Hybrid-Electric Aero-Propulsion Controls Testbed Results with Energy Storage

Electrified aircraft propulsion (EAP) research is a priority of the National Aeronautics and Space Administration (NASA) for its potential to increase propulsion system efficiency, performance, and operability at the subsystem and vehicle levels while decreasing emissions. These EAP systems demand more advanced control algorithms due to increased complexity. NASA has developed a reconfigurable, hardware-in-the-loop rig to verify control algorithm performance using a sub-scale electro-mechanical system. A novel capability of this rig is the ability to test full scale EAP control algorithms on a sub-scale representation of the electro-mechanical system without turbomachinery/rotors. A novel feature is the use of a physical energy storage device within the electro-mechanical system. A dual spool, parallel hybrid-electric turbofan architecture and energy management control system is tested with the goal of verifying the ability to obtain turbomachinery model operability benefits while controlling sub-scale electro-mechanical hardware. Pre-test predictions of the turbofan model, control, and rig performance were obtained through simulation using a software model of the rig. Theoretical results showing the true performance of the turbofan model were obtained through a software simulation using full-scale mechanical shaft models. The paper compares theoretical, predicted, and actual test results from the turbofan model, energy management control and rig perspectives. The results show that the presence of sub-scale electro-mechanical hardware did not inhibit the energy management algorithm from achieving turbomachinery operability benefits.

hybrid↗
NASA NTRSDate not supplied

Evolution of the Next Exploration Toilet Through Human-in-the-Loop (HITL) Testing

Human waste collection in space is a unique and necessary function that all crewmembers must perform. The variability in how each crewmember uses the toilet to urinate and defecate introduces complexities and challenges with regards to overall hardware design. Because of this variability, it is important to consider crew inputs in all aspects of a toilet design especially with regards to crew interfaces that could impact overall waste collection. Access to crew feedback is essential to the design process and should be considered early and often through the various design phases. In 2020, NASA started a project for the Human Landing System (HLS) program to develop a Government Furnished Equipment (GFE) toilet option. The project is known as the Lavatory On-Orbit (LOO). During the early development of the LOO, the project team conducted several crew evaluations to collect and summarize valuable crew feedback on system design, function, and overall usability to influence the next design iteration. Because every person could use the system differently in space, it was extremely important to collect and analyze the data in a very methodical manner to appropriately influence the design based on the evaluation results. Establishing a standard process ensures consistent data collection from one evaluation to another, helps to maintain privacy for each test subject’s inputs and removes any potential bias from test subject to test subject. To date, the team has completed four rounds of crew evaluations with multiple crewmembers on prototypes for the different LOO subsystems. This paper will summarize the methodology used to conduct the evaluations as well as how data was collected and analyzed. The paper will also provide details on each of the evaluations and how the design was updated based on the results.

toilet↗
DOE OSTI2025

Nature-GL: A Revolutionary Learning Paradigm Unleashing Nature’s Power in Real-World Spatial-Temporal Graph Learning

Spatial-Temporal Graph Learning (ST-GL) is a prominent research area due to its unique capability to effectively learn real-world graphs. Applications of ST-GL pose stringent and various demands on not only real-time inference with low energy cost and high ac- curacy but also fast training. Unfortunately, as Moore’s Law approaches its limits and ST-GL model complexity drastically grows, the gap between digital hardware’s computational power and ST- GL application demands is widening. In response, this paper introduces Nature-GL, a nature-powered graph learning paradigm that exploits the principle of entropy increase to advance graph learning. In particular, Nature-GL transforms both the training and inference of real-valued ST-GL into electron-speed natural anneal- ing processes of a parameterized dynamical system that represents the target graphs. Experimental results across four real-world ap- plications with six datasets demonstrate that Nature-GL achieves orders-of-magnitude speedups in both training and inference, delivering higher accuracy compared to Graph Neural Networks.

Liu, Chuan [University of Rochester]↗
NASA NTRS2017

Anthropometry and Biomechanics Facility Presentation to Open EVA Research Forum

NASA is required to accommodate individuals who fall within a 1st to 99th percentile range on a variety of critical dimensions. The hardware the crew interacts with must therefore be designed and verified to allow these selected individuals to complete critical mission tasks safely and at an optimal performance level. Until now, designers have been provided simpler univariate critical dimensional analyses. The multivariate characteristics of intra-individual and inter-individual size variation must be accounted for, since an individual who is 1st percentile in one body dimension will not be 1st percentile in all other dimensions. A more simplistic approach, assuming every measurement of an individual will fall within the same percentile range, can lead to a model that does not represent realistic members of the population. In other words, there is no '1st percentile female' or '99th percentile male', and designing for these unrealistic body types can lead to hardware issues down the road. Furthermore, due to budget considerations, designers are normally limited to providing only 1 size of a prototype suit, thus requiring other possible means to ensure that a given suit architecture would yield the necessary suit sizes to accommodate the entire user population. Fortunately, modeling tools can be used to more accurately model the types of human body sizes and shapes that will be encountered in a population. Anthropometry toolkits have been designed with a variety of capabilities, including grouping the population into clusters based on critical dimensions, providing percentile information given test subject measurements, and listing measurement ranges for critical dimensions in the 1st-99th percentile range. These toolkits can be combined with full body laser scans to allow designers to build human models that better represent the astronaut population. More recently, some rescaling and reposing capabilities have been developed, to allow reshaping of these static laser scans in more representative postures, such as an abducted shoulder. All of the hardware designed for use with the crew must be sized to accommodate the user population, but the interaction between subject size and hardware fit is complicated with multi-component, complex systems like a space suit. Again, prototype suits are normally only provided in a limited size range, and suited testing is an expensive endeavor; both of these factors limit the number and size of people who can be used to benchmark a spacesuit. However, modeling tools for assessing suit-human interaction can allow potential issues to be modeled and visualized. These types of modeling tools can be used for analysis of a larger combination of anthropometries and hardware types than could feasibly be done with actual human subjects and physical mockups.

Rajulu, Sudhakar↗
NASA NTRS2014

Developing an Integration Infrastructure for Distributed Engine Control Technologies

Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.

distributed control↗
NASA NTRS2005

Environmental Conditions for Space Flight Hardware: A Survey

Interest in generalization of the physical environment experienced by NASA hardware from the natural Earth environment (on the launch pad), man-made environment on Earth (storage acceptance an d qualification testing), the launch environment, and the space environment, is ed to find commonality among our hardware in an effort to reduce cost and complexity. NASA is entering a period of increase in its number of planetary missions and it is important to understand how our qualification requirements will evolve with and track these new environments. Environmental conditions are described for NASA projects in several ways for the different periods of the mission life cycle. At the beginning, the mission manager defines survivability requirements based on the mission length, orbit, launch date, launch vehicle, and other factors . such as the use of reactor engines. Margins are then applied to these values (temperature extremes, vibration extremes, radiation tolerances, etc,) and a new set of conditions is generalized for design requirements. Mission assurance documents will then assign an additional margin for reliability, and a third set of values is provided for during testing. A fourth set of environmental condition values may evolve intermittently from heritage hardware that has been tested to a level beyond the actual mission requirement. These various sets of environment figures can make it quite confusing and difficult to capture common hardware environmental requirements. Environmental requirement information can be found in a wide variety of places. The most obvious is with the individual projects. We can easily get answers to questions about temperature extremes being used and radiation tolerance goals, but it is more difficult to map the answers to the process that created these requirements: for design, for qualification, and for actual environment with no margin applied. Not everyone assigned to a NASA project may have that kind of insight, as many have only the environmental requirement numbers needed to do their jobs but do not necessarily have a programmatic-level understanding of how all of the environmental requirements fit together.

Plante, Jeannette↗
NASA NTRSDate not supplied

Lessons Learned from Astrobee Operations on the International Space Station

Since its launch in 2019, NASA has been operating three Astrobee free-flying robots providing an autonomous and adaptable research platform aboard the International Space Station (ISS). These robots have not only facilitated a myriad of national and international research endeavors in microgravity but have also served as a STEM outreach platform for student competitions aboard the ISS. Amidst its extensive operational tenure, spanning over five years and exceeding 1200 hours of cumulative free-flyer operation as of April 2024, the Astrobee robots have encountered software and hardware anomalies. Despite its inherent design for on-orbit repair or replacement, certain anomalies have proven to be complex, necessitating remote resolution via software and firmware updates or, in extreme cases, hardware replacements or the return of faulty units to NASA's ground facilities for repair. Such challenges underscore the delicate balance between the autonomous functionality of Astrobee and the occasional need for human intervention to maintain optimal performance. One recurring point of failure identified during Astrobee's operational lifespan has been the SD card, a critical component utilized by the different Astrobee processors and the Dock Station. The occurrence of SD card anomalies, both on orbit and within ground units, has provided invaluable insights into the improvement of Astrobee's systems and mitigation to future faults. This presentation will focus on four key areas: 1. Overview of Faults and Anomalies: A comprehensive examination of the diverse array of faults and anomalies encountered by Astrobee and its associated systems both in orbit and on the ground. From software glitches to hardware malfunctions, this section provides insights into the challenges faced during Astrobee's operational tenure. 2. Resolution Processes and Procedures: An in-depth discussion of the methodologies and procedures implemented to resolve the encountered anomalies. This includes remote troubleshooting, software patches, firmware updates, and, when necessary, the logistics involved in hardware replacements or down-massing for repair. 3. Implementation of Software Updates and Hardware Upgrades: A detailed exploration of the strategies employed to mitigate the risk of recurring anomalies through the implementation of software updates and hardware upgrades. This section highlights the iterative nature of Astrobee's development, emphasizing the continuous pursuit of robustness and reliability. 4. Lessons Learned and Future Directions: Reflecting on the insights gained from addressing anomalies, this section examines the lessons learned and outlines future directions for enhancing Astrobee's robustness and resilience. It underscores the iterative nature of space exploration and the importance of adaptability and continuous improvement in the pursuit of scientific discovery. Through a nuanced examination of Astrobee's operational challenges and the strategies employed to overcome them, this presentation sheds light on the complexities of operating autonomous robotic systems in the ISS environment. It underscores NASA's commitment to pushing the boundaries of exploration and innovation while navigating the inherent challenges of space exploration.

Astrobee↗