Search NASA⌕ Search

SEARCH · Search NASA

Results for “high pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Thermal analysis of high-pressure hydrogen during the discharging process

The transient temperature and pressure of hydrogen are measured during the hydrogen discharging process through an orifice in a high-pressure vessel. The initial pressures of hydrogen in the vessel are set to approximately 30, 60, and 100 MPa. The mass flow rate and heat flux between hydrogen and the inner wall of the vessel are theoretically estimated using fundamental equations and experimental results with accurate thermophysical properties of hydrogen. The generation of temperature distribution and flow due to heat transfer in the vessel during discharge is verified by numerical analysis. Further, the relationship between reference gas temperature and heat flux in the vessel during the release of high-pressure hydrogen is studied. The average heat flux in the vessel is calculated using experimental and numerical analysis. The appropriate reference temperature is obtained using the comparison of the average heat flux in the vessel. In addition, the dominant heat transfer mode during hydrogen discharge is investigated. Numerical analysis shows that natural convection is formed inside the vessel due to a decrease in temperature. The Nusselt numbers in this process are presented as a function of Rayleigh numbers which are obtained by the experimental results and mass and energy conservations. The relationship between the Nusselt and Rayleigh numbers agrees with the heat transfer correlations of natural convections.

08 HYDROGEN↗
DOE OSTI2023

Insights on the dissolution of water in an albite melt at high pressures and temperatures from a direct structural analysis

The water dissolution mechanism in silicate melts under high pressures is not well understood. Here we present the first direct structure investigation of a water-saturated albite melt to monitor the interactions between water and the network structure of silicate melt at the molecular level. In situ high-energy X-ray diffraction was carried out on the NaAlSi 3 O 8 -H 2 O system at 800 °C and 300 MPa, at the Advanced Photon Source synchrotron facility. The analysis of the X-ray diffraction data was augmented with classical Molecular Dynamics simulations of a hydrous albite melt, incorporating accurate water-based interactions. The results show that metal–oxygen bond breaking at the bridging sites occurs overwhelmingly at the Si site upon reaction with H 2 O, with subsequent Si–OH bond formation and negligible Al–OH formation. Furthermore, we see no evidence for the dissociation of the Al 3+ ion from the network structure upon breaking of the Si–O bond in the hydrous albite melt. The results also indicate that the Na + ion is an active participant in the modifications of the silicate network structure of the albite melt upon water dissolution at high P–T conditions. We do not find evidence for the Na + ion dissociating from the network structure upon depolymerization and subsequent formation of NaOH complexes. Instead, our results show that the Na + ion persists as a structure modifier with a shift away from Na–BO bonding to an increase in the extent of Na-NBO bonding, in parallel with pronounced depolymerization of the network. Our MD simulations show that the Si–O and Al–O bond lengths are expanded by about 6% in the hydrous albite melt compared to those of the dry melt at high P–T conditions. The changes in the network silicate structure of a hydrous albite melt at high pressure and temperature, as revealed in this study, must be considered in the advancement of water dissolution models of hydrous granitic (or alkali aluminosilicate) melts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A high-pressure Raman study of FeTiO 3 ilmenite: Fermi resonance as a manifestation of Fe-Ti charge transfer

In this work, we investigated the 300 K high-pressure behavior of ilmenite using Raman spectroscopy to 54 GPa. Upon compression, we observe a Fermi resonance between the lowest frequency A g symmetry peaks (ν 4 and ν 5 ) between ~ 10 and ~ 30 GPa: bands that involve major components of Ti–O and Fe–O-related displacements, respectively. The peaks’ relative intensities switch at ~ 18 GPa and they also reach their minimum separation at ~ 20 GPa, indicating that their maximum resonance occurs between 18 and 20 GPa. The negative shift of the Ti–O-associated ν 4 vibration under compression is fully consistent with a shift in valence of Ti from 4 + to 3 + under compression. Anomalously small mode shifts of other, more localized vibrations are also consistent with a charge transfer from Fe to Ti under compression. At higher pressures, we have not found definitive evidence for a transition to the perovskite-structure at 300 K, which has been well characterized at high pressures and temperatures. At 40 GPa, we observe an apparent reversible disordering that persists up to our highest pressure. The 300 K mode shifts of the Raman active modes in FeTiO 3 under pressure are notably different from those of other ABO 3 compounds (where A = Mg, Mn and B = Ti, Si); in other ilmenite-structured compounds, the peaks shift at a faster rate and there has not been any observation of Fermi resonance. Thus, iron’s complex electronic structure, and its charge transfer with titanium, appears to play a primary role in the behavior of phonons in FeTiO 3 ilmenite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Access and Capture of Layered Double Perovskite Polytypic Phase through High-Pressure Engineering

Engineering halide perovskites through external pressure is as an effective means to tune the crystal structure, thus optoelectronic properties of the material. In this work, we studied the structural and optical property evolutions of Cs 4 M II Bi 2 Cl 12 (M II : Cd, Cd 0.8 Mn 0.2 , Mn) layered double perovskite (LDP) crystalline powders under high pressure. A novel polytypic phase transition was observed featuring lateral interlayer sliding of the Bi–M II –Bi trilayer units, resulting in a new LDP-12R phase. Importantly, this high-pressure induced LDP-12R crystal phase can be preserved after complete decompression and captured at ambient conditions. Moreover, the LDP samples showed a pressure-dependent photoluminescence property. Finally, our findings exemplified a new perovskite polytype that can be accessed and captured through high-pressure processing, advocating the uniqueness of LDP materials with soft and transformable crystal lattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Pressure Characterization of Two Stereoisomers of Tetranitroester Cyclobutane

The high-pressure behavior of two stereoisomeric cyclobutane nitric ester materials were studied at room temperature to near 25 GPa via Raman spectroscopy and powder X-ray diffraction. The materials investigated included [cis-trans-cis]- and [all-cis]-tetranitrate ester cyclobutanes. Over the course of these studies no evidence of polymorphism was observed, highlighting the stability of the ambient pressure crystal structures of the cyclobutanes to conditions near the detonation pressure of the material. Differences were observed between the bulk moduli of the two stereoisomers, suggesting potential tunability in materials response under dynamic conditions through the use of isomeric materials. Finally, such findings suggest that these high-performance materials can serve as TNT replacement in novel melt-castable energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of a munition.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2021

Isotherm measurements of high-pressure metal hydrides for hydrogen compressors

Hydrogen absorption and desorption isotherms have been measured for several metal hydride alloys identified as possible candidates in the high-pressure (i.e. >80 MPa) stage of a two-stage hydrogen compressor. The isotherms were obtained using two independent Sieverts volumetric test systems built specifically for measuring hydrogen absorption and desorption parameters from 0.10 to 100 MPa. The results obtained enabled us to identify the alloy Ti 0.8 Zr 0.2 Fe 1.6 V 0.4 as the most viable of the candidates investigated for use in the high-pressure stage of a prototype two-stage 80+ MPa compressor, as it produced the highest desorption pressures at moderate temperatures. Issues and challenges in determining reliable isotherms at pressures >50 MPa are also described.

08 HYDROGEN↗
DOE OSTI2024

Structural transition and uranium valence change in UTe 2 at high pressure revealed by x-ray diffraction and spectroscopy

High-pressure x-ray diffraction up to 30 GPa, in conjunction with resonant emission x-ray spectroscopy and partial fluorescence yield x-ray absorption spectroscopy up to 52 GPa, were used to study how the structural and electronic properties of UTe2 evolve with pressure at room temperature. An orthorhombic-to-tetragonal phase transition was observed to occur between 5 and 7 GPa, with a large volume collapse of nearly 10% and a nearest U-U distance increase by about 4%. This lower-to-higher symmetry transition suggests less 5⁢f electron participation in bonding when the weakly correlated superconducting phase in the tetragonal structure of UTe 2 appears. Beyond 7 GPa, no new structural transitions were found up to 30 GPa. The resonant x-ray emission spectra clearly demonstrate an intermediate valence of U, nearly +3.74 at 1.8 GPa and room temperature, and reveal that the U valence shifts towards 4+, passes through a peak at 2.8 GPa, then decreases towards 3+ and settles down to a nearly constant value above 15 GPa. These experiments reveal that some fundamental structural and valence changes occur in UTe 2 at relatively low pressures, which could be responsible for the interplay between unconventional superconductivity, magnetic ordering, and weakly correlated superconductivity that is manifested in the temperature-pressure phase diagram of UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Randomly Layered Superstructure of In 2 O 3 Truncated Nano-Octahedra and Its High-Pressure Behavior

This study outlines the synthesis and characterization of a unique superlattice composed of vertex-truncated indium oxide (In 2 O 3 ) nano-octahedra, along with an exploration of its response to high-pressure conditions. Here, using a bright-field transmission electron microscope (BF-TEM), we determined an average circumradius of 15.2 nm for these octahedral building blocks. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined by employing synchrotron-based Wide-Angle X-ray Scattering (WAXS) and Small-Angle X-ray Scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice comprised of random layers in alignment with a 2D p31m symmetry. Notably, the SAXS data unveiled a pressure-induced, irreversible octahedron translation and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation in the superlattice cell parameter induced by pressure. This research signifies a noteworthy progression in deciphering the intricate behaviors of 2D superlattices under high-pressure conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Pressure and Two-Sided Mold Surface Solutions (CRADA Final Report)

This project provided surface solutions for highly loaded precision tooling relevant to the automotive industry. Previous development work in coatings for Big Area Additive Manufacturing (BAAM) has produced commercialized coatings for low temperature Acrylonitrile Butadiene Styrene (ABS) tools (TD Coat RT) as well as a soft coating for high temperature applications (TD Seal HT). The team developed these coatings and commercialized them during a prior Manufacturing Demonstration Facility (MDF) technical collaboration (NFE-15-05793). During the prior collaboration, commercialization testing was successfully performed by the Boeing and NAVAIR and resulted in an Awards for Composites Excellence (ACE), award at CAMX – The Composites and Advanced Materials Expo 2016. While this work was clearly successful, gaps in the technology were identified, that prevent widespread adoption of large-scale additive manufacturing in high pressure tooling applications prevalent in the automotive industry. In this project we focused on development of surface solutions for two-sided, compression molding tooling printed on a large-scale polymer AM system in an arbitrary build orientation. We have printed a single cavity extrusion compression molding mold using Polyphenylene sulfide/carbon fiber (PPS/CF) materials, 50% by weight CF samples. These processes are commonly used by Original Equipment Manufacturers (OEM) and Tier 1 suppliers for high volume automotive applications. Several OEMs have identified the need for such technology, indicating significant time and monetary savings could be possible if commercially available surface solutions for high pressure Additive Manufacturing (AM) tooling existed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Full waveform analysis for high pressure ultrasonic measurement

In this paper we report a data analysis protocol for ultrasonic velocity measurements carried out in a synchrotron x-ray facility based multi-anvil high-pressure apparatus. Synthetic ultrasonic signals for the time period between echoes from the two ends of the sample assembly are created with a few simple parameters as the echo waveform is modeled by the first echo from the anvil-assembly boundary. Each echo is modeled as a delta function with an amplitude and arrival time and convolved with this waveform. The final waveform, fit to the data, enables analysis of signals with overlapped echoes as they are common in small cell assemblies and high pressure.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Exploring the hardness and high-pressure behavior of osmium and ruthenium-doped rhenium diboride solid solutions

Rhenium diboride (ReB 2 ) exhibits high differential strain due to its puckered boron sheets that impede shear deformation. Here, we demonstrate the use of solid solution formation to enhance the Vickers hardness and differential strain of ReB 2 . ReB 2 -structured solid solutions (Re 0.98 Os 0.02 B 2 and Re 0.98 Ru 0.02 B 2 , noted as “ReOsB 2 ” and “ReRuB 2 ”) were synthesized via arc-melting from the pure elements. In-situ high-pressure radial x-ray diffraction was performed in the diamond anvil cell to study the incompressibility and lattice strain of ReOsB 2 and ReRuB 2 up to ~56 GPa. Both solid solutions exhibit higher incompressibility and differential strain than pure ReB 2 . However, while all lattice planes are strengthened by doping osmium (Os) into the ReB 2 structure, only the weakest ReB 2 lattice plane is enhanced with ruthenium (Ru). These results are in agreement with the Vickers hardness measurements of the two systems, where higher hardness was observed in ReOsB 2 . The combination of high-pressure studies with experimentally observed hardness data provides lattice specific information about the strengthening mechanisms behind the intrinsic hardness enhancement of the ReB 2 system.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen Reduction Reaction Activity of Nanocolumnar Platinum Thin Films by High Pressure Sputtering

Nanocolumnar platinum thin films (Pt-TFs) were produced by high pressure sputtering (HIPS) and investigated as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells. Conventional high-density Pt-TF prepared by low pressure sputtering was also studied for comparison. Pt-TFs were deposited on a microporous layer (MPL)-like surface composed of carbon particles to mimic catalyst-coated gas diffusion electrodes. Electron microscopy imaging revealed that HIPS Pt-TFs developed a cauliflower-like columnar microstructure, which originated from a shadowing effect during HIPS. This shadowing effect is enhanced on the rough surface of the MPL-like carbon that leads to the nano-cauliflower formation. With this approach, we also aimed to relate the catalyst performance obtained by benchtop tests directly to membrane electrode assembly test results. The electrochemically active surface area of Pt-TFs increased from 10 to 19 m 2 /g with increasing sputter pressure. Specific activity of conventional high-density and nanocolumnar films were similar at ~600 μA/cm 2 , which is likely due to their similar crystal grain sizes, >5 nm. On the other hand, mass-specific (MA) activity values increased from ~0.06 A/mgPt for conventional Pt-TF to ~0.13 A/mgPt for HIPS Pt-TFs, which is consistent with the columnar microstructure of HIPS films providing a better catalyst utilization compared to conventional Pt-TF.

08 HYDROGEN↗
DOE OSTI2022

High-pressure structural systematics of dysprosium metal compressed in a neon pressure medium to 182 GPa

Here we present an experimental and theoretical study of dysprosium metal compressed in the soft pressure transmitting medium Ne up to 182 and 300 GPa, respectively. Angle-dispersive x-ray powder diffraction data from each of the high-pressure polymorphs shows anisotropic compression behavior indicating changes to the electron density distribution throughout its polymorphic landscape. We compare the monoclinic (mC4) and orthorhombic (oF16) structures for the collapsed structure for Dy above 82 GPa and verify that the oF16 structure offers a better fit to our data than the previously reported mC4 structure. Further, we have found that the oF16 structure undergoes similar anisotropic compression of its lattice parameters, with a turning point above 160 GPa; suggesting a potential phase transition at pressures much higher than achieved in this study. Density functional theory calculations show the likely candidate for this new high-pressure phase is the isosymmetric oF8 structure, which is predicted to be lower in energy than the oF16 structure above 275 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Dynamics of hydrogen–ammonia–natural gas lean-premixed high-pressure flames

The influence of fuel composition on self-excited combustion instabilities in a high-pressure combustor operated with ammonia, hydrogen, and natural gas fuels is characterized with high-frequency pressure measurements and imaging of the flame structure. A micromix multi-stage injector with 19 elements is used to introduce the fuel blend premixed with heated air into an optically accessible combustor operated at ~1.1 MPa. As hydrogen is substituted for natural gas, longitudinal thermoacoustic instabilities are observed in the combustor with pressure fluctuation amplitudes as large as 8% of the mean chamber value. In the absence of natural gas, limit-cycle instability magnitude is largely insensitive to ammonia addition. However, fuel compositions with > 20% natural gas result in positive correlation between instability amplitude and ammonia concentration. Spatial distribution of heat release in the combustor evaluated from OH* chemiluminescence imaging reveals axial growth in the regions of heat release fluctuation as hydrogen decreases, thus correlating flame length to instability amplitude. Distinct transitions from the first harmonic of the fundamental longitudinal acoustic mode (~1100 Hz) to the fundamental mode (~550 Hz) are observed with root mean square pressure fluctuations exceeding 7% of the mean chamber value. Here, these cases correspond to hydrogen mole fractions ≤ 50%. Analysis of the phase relationship between pressure fluctuations upstream and downstream of the flame zone indicates acoustic coupling of the injector as a key contributor to instability growth.

03 NATURAL GAS↗
DOE OSTI2024

High-Pressure Melting Experiments of Fe 3 C and a Thermodynamic Model of Fe-C Liquids for the Earth's Core

Melting experiments of Fe 3 C were conducted to 85 GPa in laser-heated diamond anvil cells with in situ X-ray diffraction and post-experiment textural observation. From the determined pressure-temperature conditions of the melting curve for Fe 3 C, together with literature data on the melting point of diamond and eutectic point of the system Fe-Fe 3 C/Fe 7 C 3 under high pressures, we established a self-consistent thermodynamic model for high-pressure melting of the system Fe-C including the mixing parameters for liquids. The results show that mixing of Fe and C liquids is negatively nonideal from 1 bar to the pressure at the center of the Earth. The departure from ideal mixing becomes progressively larger with increasing pressure, which leads to greatly stabilized liquids under core pressures. The modeled carbon content in eutectic melts under core pressures is 3.3–4.4 wt%. From the Gibbs free energy, we derived an internally consistent parameters for Fe-C outer cores which included the crystallizing points at their bottoms, isentropic thermal profiles, and densities and longitudinal seismic wave speeds (Vp). While the addition of carbon in excess of the eutectic melt composition effectively reduces the density of iron liquid, the Vp of iron liquid is not greatly changed. Therefore, the low density and high Vp of PREM relative to pure iron cannot be reconciled by an Fe-C liquid. Therefore, the Earth's core cannot be approximated by the system Fe-C and should include another light element.

58 GEOSCIENCES↗
DOE OSTI2021

High-Pressure Synthesis of Bulk Cobalt Cementite, Co 3 C

Transition metal carbides find use in a wide range of advanced high-resilience applications including high-strength steels, heat shields, and deep-earth drills. However, carbides of the mid-to-late transition metals remain difficult to isolate and characterize on account of their metastability, which precludes the preparation of high-quality bulk single crystal samples using traditional solid-state methods. Herein, we report a combined computational and experimental survey of the cobalt-carbon binary system under high pressures and demonstrate that pressure offers a route toward the bulk synthesis of the metastable cementite-type cobalt carbide, Co 3 C, which under ambient conditions can only be prepared in low-dimensional thin film or nanoparticle forms. First-principles calculations reveal two competitive low-energy stoichiometric phases under ambient pressures - Pnnm-Co 2 C (Fe 2 C-type) and Pnma-Co 3 C (Fe 3 Ctype) - consistent with the known low-dimensional phases that have been studied for their promising magnetic properties. However, the calculated formation enthalpy of Pnma-Co 3 C decreases steadily with the applied pressure, while that of Pnnm-Co 2 C increases. Here, we pursue these results using high-pressure laser-heated synthesis methods coupled with in situ X-ray diffraction and observe the formation of Pnma-Co 3 C above 4.8 GPa. We determine the experimental bulk modulus of Co 3 C to be K o = 237 GPa (K p = 4.0). First-principles calculations of the phonon modes in Co 3 C reveal dynamical instabilities at ambient pressure that are absent under compression. These results offer a promising new route for the synthesis of rare-earth-free magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Study on the High-Pressure Behavior of Goethite up to 32 GPa Using X-Ray Diffraction, Raman, and Electrical Impedance Spectroscopy

Goethite is a major iron-bearing sedimentary mineral on Earth. In this study, we conducted in situ high-pressure x-ray diffraction, Raman, and electrical impedance spectroscopy measurements of goethite using a diamond anvil cell (DAC) at room temperature and high pressures up to 32 GPa. We observed feature changes in both the Raman spectra and electrical resistance at about 5 and 11 GPa. However, the x-ray diffraction patterns show no structural phase transition in the entire pressure range of the study. The derived pressure-volume (P-V) data show a smooth compression curve with no clear evidence of any second-order phase transition. Fitting the volumetric data to the second-order Birch–Murnaghan equation of state yields V 0 = 138.9 ± 0.5 Å 3 and K 0 = 126 ± 5 GPa.

58 GEOSCIENCES↗
DOE OSTI2021

Stability of the peroxide group in BaO 2 under high pressure

Alkaline earth metal peroxides are typical examples of ionic compounds containing polyanions. We herein report a stable BaO 2 phase at high pressure up to 130 GPa found via a first-principles computational structure searches and high-pressure experimental investigations. The identified monoclinic structure (space group C2/m) can be derived by sublattice distortions of Ba atoms and peroxide groups associated with the phonon mode softening of the lower-pressure Cmmm structure. Contrary to the previous expectation of polymerization of the peroxide group at elevated pressure, the new phase retains the peroxide group and interestingly exhibits an insulating behavior demonstrating an increase of the band gap under compression. Our synchrotron XRD measurements could not distinguish between Cmmm and C2/m BaO 2 definitively because the difference in XRD patterns is very subtle. However, our data do not show any sign of polymerization transition up to 120 GPa. Raman spectra of the O-O peroxide vibration show a small anomaly in frequency at 110 GPa, which is qualitatively similar to that predicted theoretically due to the Cmmm to C2/m phase transition thus supporting the predicted transformation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗