Search NASA⌕ Search

SEARCH · Search NASA

Results for “impact”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The impacts of horizontal resolution on the seasonally-dependent biases of the northeastern Pacific ITCZ in coupled climate models.

Double-ITCZ has puzzled climate model community for more than two decades. Here, we found that over the eastern Pacific, precipitation and sea surface temperature (SST) biases in the NCAR CESM1 are seasonally-dependent, with positive (negative) precipitation/SST biases during boreal summer/fall (winter/spring), although the easterly wind bias persists around the year. This seasonally-dependent bias of precipitation/SST is found to be caused by the failure of the model to reproduce the climatological seasonal wind reversal of North American monsoon. During winter/spring, the climatological easterly wind dominates, so the stronger wind speed in the model enhances the evaporation and lowers the SST. It is opposite when the climatological wind turns to westerly during summer/fall. The easterly wind bias also occurs in the atmospheric model when the observation SST is prescribed, suggesting it is of atmospheric origin. Further, the easterly wind bias is mainly evident in the lower troposphere and quite independent of time, implying the effect of complex and narrow-ranged Central American topography, which is not depicted well in the coarse model resolution. When the model resolution is doubled, both SST and precipitation are improved with the reduced easterly wind bias. During boreal spring, when ITCZ bias is most significant, the northern and southern ITCZ can be improved by 29% and 18.8% respectively in the higher resolution. Finally, we suggest that these seasonally-dependent biases over the eastern Pacific are quite universal among 37 CMIP5 coupled models, and the ongoing CMIP6 project will provide a valuable opportunity to examine whether the bias can be reduced by increasing model resolution.

Song, Fengfei↗

On the Impact of Income, Age, and Travel Distance on the Value of Time

The value of time (VOT) is a fundamental component used in transportation modeling, policy analysis, and economic appraisal. Decades of research and practice have empirically estimated the VOT across many factors (e.g., mode, purpose, time, comfort, etc.), yet little is known about its underlying form. Although it is well established that VOT can vary, it is still unclear whether patterns exist in this variation. The objective of this paper is not to merely estimate the VOT, but to model the VOT across multiple continuous and interacting variables. The purpose is to reveal its functional form with respect to mode, age, gender, purpose, income, and time of day to provide a generalizable understanding for future research and practice. Such an understanding can help develop simpler models and reduce the need for bespoke estimations for every conceivable variable perturbation. This research utilized a household travel survey containing 14,159 reported trips with imputed travel time and costs for the alternative mode choices. The average overall estimated VOT is 40.32 $/h, with results showing VOT varying log-linearly with income and trip distance, but following a Gaussian function (normal curve) with age. Overall, the results show that travel distance dominates VOT variation, which increases exponentially at a rate that is 3.61 times higher per mile of distance than per $10,000 of income, and that VOT by age peaks at age 54. This basic understanding of how the VOT varies sets the foundation for answering the subsequent question for why it might vary.

Engineering↗

Impact of low reactivity fuel type on low load combustion, emissions, and cyclic variations of diesel-ignited dual fuel combustion

In this study, cyclic variations in dual fuel combustion with diesel ignition of three different low reactivity fuels (methane, propane, and gasoline) are examined under identical operating conditions. Experiments were performed on a single cylinder research engine (SCRE) at a low load of 3.3 bar brake mean effective pressure (BMEP). The start of injection (SOI) of diesel was varied from 280 to 330 absolute crank angle degrees (CAD). Engine speed, rail pressure, and boost pressure were held constant at 1500 rpm, 500 bar, and 1.5 bar, respectively. The energy substituted by the low reactivity fuel was fixed at 80% of the total energy input. It was found that diesel-methane (DM) and diesel-propane (DP) combustion were affected by diesel mixing to a greater extent than diesel-gasoline (DG) combustion due to the higher reactivity of gasoline. The magnitude of low temperature heat release was greatest for DG combustion followed by DM and DP combustion for all SOIs. The ignition delay for DG combustion was the shortest, followed by DM and DP combustion. DM and DP combustion exhibited more cyclic variations than DG combustion. Cyclic variations decreased for DM and DP combustion when SOI was advanced; however, DG combustion cyclic variations remained essentially constant for all SOIs. Earlier SOIs (280, 290, 300, and 310 CAD) for DM and (280, 290, and 300 CAD) for DP combustion indicated some prior-cycle effects on the combustion and IMEP (i.e. some level of determinism).

Engineering↗

Experimental study of the impact of scavenging efficiency on diesel combustion in an opposed-piston two-stroke engine

The opposed-piston two-stroke (OP2S) engine is a promising alternative powertrain technology that can offer thermal and brake efficiency improvements over conventional four-stroke engines. In recent years, many of the technical barriers of the OP2S engine architecture have been overcome. However, there is still a need for fundamental studies to provide insight into the scavenging and combustion processes of the OP2S engine to help design and operate the most efficient combustion systems using this engine architecture. This work aims to provide such insights by analyzing experimental data collected on a 3-cylinder, 4.9 L OP2S engine. Specifically, a scavenging efficiency sweep, an engine speed sweep with a constant scavenging efficiency, and an engine speed with a constant pressure differential across the engine were studied in detail. It was found that in diesel combustion, as the scavenging efficiency decreased, the increase in temperature of the hot, internal residuals resulted in a significant increase in heat transfer. Despite lowering pumping losses, this resulted in an overall decrease in brake efficiency. When the bulk thermodynamic conditions of two different scavenging efficiency cases (67% and 72%) were matched at port closing, the lower scavenging efficiency case still displayed a 0.7 percentage point penalty in net thermal efficiency and an increase in engine-out indicated specific emissions of NOx of 18% due to residual stratification in the cylinder. The results presented in this work show that the optimal breathing strategy in diesel combustion on an OP2S engine architecture is one that results in a slightly under-scavenged environment at port closing. However, the results did show potential system-level efficiency benefits of decreasing scavenging efficiency, meaning that alternative fuels and combustion strategies without the constraints of diesel combustion could achieve system-level efficiency gains by running significantly under-scavenged.

Engineering↗

Data for Immediate Impacts of Soybean Cover Crop on Bacterial Community Composition and Diversity in Soil Under Long-Term Saccharum Monoculture

Saccharum yield decline results from long-term monoculture practices. Changes in cropping management can improve soil health and productivity. Below-ground bacterial community diversity and composition across soybean (Glycine max (L.) Merr) cover crop, Saccharum monoculture (30+ year) and fallowed soil were determined. Near full length (~1,400 base pairs) of 16S rRNA gene sequences were extracted from the rhizospheres of sugarcane and soybean and fallowed soil were compared. Higher soil bacterial diversity was observed in the soybean cover crop than sugarcane monoculture across all measured indices (observed operationational taxonomic units, Chao1, Shannon, reciprocal Simpson and Jackknife). Acidocateria, Proteobacteria, Bacteroidetes and Planctomycetes were the most abundant bacterial phyla across the treatments. Indicator species analysis identified nine indicator phyla. Planctomycetes, Armatimonadetes and candidate phylum FBP were associated with soybean; Proteobacteria and Firmicutes were linked with sugarcane and Gemmatimonadetes, Nitrospirae, Rokubacteria and unclassified bacteria were associated with fallowed soil. Non-metric multidimensional scaling analysis showed distinct groupings of bacterial operational taxonomic units (97% identity) according to management system (soybean, sugarcane or fallow) indicating compositional differences among treatments. This is confirmed by the results of the multi-response permutation procedures (A = 0.541, p = 0.00045716). No correlation between soil parameters and bacterial community structure was observed according to Mantel test (r = 211865, p = 0.14). Use of soybean cover-crop fostered bacterial diversity and altered community structure. This indicates cover crops could have a restorative effect and potentially promote sustainability in long-term Saccharum production systems.

Field Data↗

Data for Impact of Vertical and Seasonal Variation in Leaf Traits on Simulating Soybean Canopy Photosynthesis via 1D and 3D Modeling

Accurate modeling of photosynthesis is crucial for predicting crop productivity and quantifying the carbon cycle in agroecosystems. Leaf traits are essential inputs for modeling canopy photosynthesis. Yet, many existing models still use fixed plant functional type (PTF)-based values to parameterize leaf traits under a big-leaf or two-big-leaf assumption, neglecting their vertical profiles and seasonal changes. This simplification may introduce significant uncertainties in estimating gross primary productivity (GPP). In this study, we simulated soybean GPP and tested the effects of vertical and seasonal variation in three key leaf photosynthetic traits: the maximum carboxylation rate at 25 °C (Vcmax25), leaf chlorophyll content (LCC), and leaf mass per area (LMA) in the 1D-SCOPE and 3D-Helios models. Weekly field measurements were conducted during the growing season of 2024 to support the simulation. We designed ten leaf trait parameterization schemes by incorporating different combinations of vertical profiles and seasonal changes, while assuming homogeneous canopy architecture in both models. Our results revealed that Vcmax25 vertical and seasonal variation had the strongest influence on simulated GPP in both 1D and 3D models, while LCC and LMA effects were minimal. Particularly, the scheme with an empirically parameterized Vcmax25 profile achieved comparable performance to the scheme with the measured Vcmax25 profile. Both 1D-SCOPE and 3D-Helios accurately modeled GPP (SCOPE: R2 = 0.87, Bias = 0.55 µmol m⁻² s⁻¹; Helios: R2 = 0.9, Bias = 0.22 µmol m⁻² s⁻¹) under the most complex scheme, and their responses to vertical and seasonal variation in leaf traits were consistent, demonstrating the robustness of our findings. Based on our findings, we propose a scalable framework for parameterizing leaf traits to improve GPP simulations. This study contributes to improving the representation of leaf trait dynamics in canopy-level photosynthesis models, potentially enhancing our ability to predict crop productivity and understand agroecosystem carbon dynamics.

Photosynthesis↗

Data for Impacts of Legacy and Contemporary Nitrogen Inputs on N2O and CO2 Emissions in Miscanthus and Maize Cultivated Soils

Nutrient inputs influence the sustainability of bioenergy crop production through contemporary (shortly after addition) and legacy effects (persisting over years) on microbial nitrogen (N) and carbon cycling, which contribute to greenhouse gas emissions. However, the relative importance of contemporary and legacy effects and how that could vary by crop functional types is poorly understood. Considering its rhizomatous roots and perennial growth, we hypothesized that Miscanthus × giganteu s ( M × g ) would be more sensitive to legacy N fertilization and the historical context of its environment than an annual crop like maize. To test this hypothesis, we examined the effects of legacy and contemporary N inputs on nitrous oxide (N2O) and carbon dioxide (CO2) emissions, as well as key N cycling genes in soils where M × g and maize were grown. A 150-day soil incubation experiment was conducted using soils from a long-term M × g and maize fertility experiment with three historic N fertilization rates (0, 112, and 336 kg N ha−1 year−1) and a contemporary amendment (60 mg N kg−1) with negative control (0 mg N kg−1). We observed significant increases in cumulative N2O emissions in M × g soils relative to maize soils, particularly at higher legacy fertilization rates, while contemporary N had no significant effect. Bacterial amoA gene abundance, which plays a significant role in nitrification in nutrient-rich soils, also increased with higher legacy fertilization rates in M × g soils but was unaffected by the contemporary N. In maize soils, legacy and contemporary N did not significantly affect N2O emissions, but cumulative CO2 emissions and amoA gene abundance significantly increased. The abundances of norB genes were not significantly influenced by either legacy fertilization or contemporary N amendments in either soil. Our findings demonstrate the greater importance of fertilization history over contemporary N in mediating soil N2O emissions, particularly for perennial bioenergy crops.

Carbon↗

Photometric Redshifts with the LSST. II. The Impact of Near-infrared and Near-ultraviolet Photometry

Accurate photometric redshift (photo-z) estimates are essential to the cosmological science goals of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST). In this work, we use simulated photometry for mock galaxy catalogs to explore how LSST photo-z estimates can be improved by the addition of near-infrared (NIR) and/or ultraviolet (UV) photometry from the Euclid, Wide-Field InfrarRed Survey Telescope (WFIRST), and/or Cosmological Advanced Survey Telescope for Optical and ultraviolet Research (CASTOR) space telescopes. Generally, we find that deeper optical photometry can reduce the standard deviation of the photo-z estimates more than adding NIR or UV filters but that additional filters are the only way to significantly lower the fraction of galaxies with catastrophically under- or overestimated photo-z. For Euclid, we find that the addition of JH 5σ photometric detections can reduce the standard deviation for galaxies with z > 1 (z > 0.3) by ∼20% (∼10%), and the fraction of outliers by ∼40% (∼25%). For WFIRST, we show how the addition of deep YJHK photometry could reduce the standard deviation by ≳50% at z > 1.5 and drastically reduce the fraction of outliers to just ∼2% overall. For CASTOR, we find that the addition of its UV- and u-band photometry could reduce the standard deviation by ∼30% and the fraction of outliers by ∼50% for galaxies with z < 0.5. We also evaluate the photo-z results within sky areas that overlap with both the NIR and UV surveys and when spectroscopic training sets built from the surveys’ small-area deep fields are used.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of Rheology Models on Horizontal Well Polymer Flooding in a Heavy Oil Reservoir on Alaska North Slope: A Simulation Study

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three rheology types were considered in the study including the apparent viscosity measured during coreflooding of using a HPAM polymer, the bulk viscosity measured with a viscometer, and a Newtonian flow model. The results suggest that using the bulk viscosity in simulation underestimates the conformance control and the water-oil-ratio reduction capability of the HPAM polymer solution. When the apparent viscosity is used, the incremental oil and sweep were largely increased, and the optimal recovery period of polymer flooding was extended greatly, especially for the heterogeneous formations. Therefore, the rheology type of polymer plays a significant role in the incremental oil recovery and injection profile of the horizontal well system given the pilot test conditions. This study has provided practical guidance to field operators for the ongoing polymer flooding pilot on ANS and will also provide valuable information for other polymer projects conducted in similar conditions.

Leng, Jianqiao↗

Economic impact of stimulated technological activity. Part 1: Overall economic impact of technological progress: Its measurement

Investigations were performed at the national economic level to explore the aggregate effects of technological progress on economic growth. Inadequacies in existing marco-economic yardsticks forced the study to focus on the cost savings effects achieved through technological progress. The central questions discussed in this report cover: (1) role of technological progress in economic growth, (2) factors determining the rate of economic growth due to technological progress; (3) quantitative measurements of relationships between technological progress, its determinants, and subsequent economic growth; and (4) effects of research and development activities of the space program. For Part 2, see N72-32174.

Source record↗