Search NASA⌕ Search

SEARCH · Search NASA

Results for “integral transforms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Heterogeneous Integration Technologies for High-temperature, High-density, Low-profile Power Modules of Wide Bandgap Devices in Electric Drive Applications (Final Technical Report)

The goal of this project is to develop packaging technologies for making high-temperature, high-density, and low-profile wide-bandgap (WBG) power electronics modules for electric drives. These modules are aimed at enabling the DOE’s University Consortium to reach its 2025 inverter targets of ≥ 100 kW/L and ≤ 2.7 $/kW. The specific objectives are to: design and fabricate SiC half-bridge power modules with double-sided cooling and parasitic inductances < 5 nH, heat flux density > 400 W/cm 2 , and working junction temperature of 200 o C; design, fabricate, and deliver a gate driver with double-sided cooled modules for the construction of a 100 kW/L inverter at Oak Ridge National Lab; and design and prototype intelligent gate drivers with integrated current sensor and a low-profile DC-DC power supply with air-core transformer for testing power modules at 200 o C junction temperature. We followed an iterative technical approach of design, simulation, fabrication, and testing of various versions of modules, current sensors, and power supply. The state-of-the-art silicon carbide devices rated at 1.2 kV and 149 A were packaged by sintered-silver bonding on an aluminum nitride direct-bond-copper substrate for high thermal conductivity, high working temperature, and high joint reliability. Porous silver posts were used to interconnect the device’s source pads to the other direct-bond-copper substrate for low mechanical stresses, ease of manufacturing, and double-sided cooling. A current sensor based on package parasitic inductance was developed to measure switching current. A dynamic feedback scheme was developed to compensate the effect of parasitic resistance and temperature variation. A constant-current class-E dc-dc converter with air-core transformer was developed. Air-core transformer was used due to the unavailability of magnetic core at high temperatures. Gate driver and power supply were integrated with the double-side cooled, high temperature SiC power modules for testing the modules at 200 o C junction temperature. Double-pulse and continuous testing of the integrated technologies validated the design and fabrication of the three component technologies. Throughout the project, we overcame the challenge for design verification caused by low prototyping yield, which then helped train the graduate students, the future workforce, to learn the engineering know-how for low-cost manufacturing of reliable products. Below is a summary of the major accomplishments of this project: development of a prototyping process for fabricating double-side cooled (1200 V, 149 A) SiC phase-leg modules capable of working to 200 o C Tj; simulation and experimental verification of the improvement of thermo-mechanical reliability of the double-side cooled SiC phase-leg module by using rigid encapsulant; design and experimental validation of a current sensor based on package parasitic inductance and a compensation solution for eliminating the effect of parasitic resistance; design and experimental validation of a low-profile power supply with six-output air-core transformer for gate driver; functional demonstration of a SiC phase-leg module integrated with its gate driver, current sensor, and an air-core power supply at 200 o C Tj in a double-pulse switching test setup and Buck converter continuous test setup; successful completion of six PhD and two MS students who are or will work at Apple Inc., Tesla Inc., Wolfspeed Inc., Microchip Inc., Monolithic Power Systems Inc., and LG Magna Inc.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Improving streamflow predictions across CONUS by integrating advanced machine learning models and diverse data

Accurate streamflow prediction is crucial to understand climate impacts on water resources and develop effective adaption strategies. A global long short-term memory (LSTM) model, using data from multiple basins, can enhance streamflow prediction, yet acquiring detailed basin attributes remains a challenge. To overcome this, we introduce the Geo-vision transformer (ViT)-LSTM model, a novel approach that enriches LSTM predictions by integrating basin attributes derived from remote sensing with a ViT architecture. Applied to 531 basins across the Contiguous United States, our method demonstrated superior prediction accuracy in both temporal and spatiotemporal extrapolation scenarios. Geo-ViT-LSTM marks a significant advancement in land surface modeling, providing a more comprehensive and effective tool for better understanding the environment responses to climate change.

Tayal, Kshitij↗
DOE OSTI2023

A mesoscale crystal plasticity model to predict room-temperature deformation and martensitic transformation of high-strength Quenching and Partitioning (Q&P) Steels and validation with synchrotron X-ray diffraction

Renowned for the superior mechanical properties and adeptness at cold-forming, Quenching and Partitioning (QP) steels have gained prominence as a promising candidate material in fabricating safety-critical components in various industries. The pertinent research on QP steels focus on the martensitic transformation of the Retained Austenite (RA) phase during cold-forming, a crucial mechanism that substantially influences the overall strength and ductility of QP steels. The austenite stability and transformation rate heavily rely on the local strain path and the initial microstructure, which is challenging for analytical prediction. In this paper, a mesoscale model is developed to capture the deformation and transformation kinetics of QP steels inside the microstructure. The model integrates the detailed explicit microstructure, acquired from characterization experiments, into a high-resolution finite element (FE) mesh. It distinctly model the deformation and interaction between the various phases and the effect on the transformation of RA. The model is validated with high energy X-ray diffraction (HEXRD) data, and shows excellent capability in predicting the asymmetric stress-strain behavior under uniaxial tension and compression, as well as the martensitic transformation rate. The model is used to investigate the strain and load partitioning effect of surrounding matrix to the transformation of RA, offering insights into the complex behavior of QP980 and facilitates further material development.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Orientation reversal and the Chern-Simons natural boundary

We show that the fundamental property of preservation of relations, underlying resurgent analysis, provides a new perspective on crossing a natural boundary, an important general problem in theoretical and mathematical physics. This reveals a deeper rigidity aspect of resurgence in a quantum field theory path integral. The physical context here is the non-perturbative completion of complex Chern-Simons theory that associates to a 3-manifold a collection of q-series invariants labeled by Spinc structures, for which crossing the natural boundary corresponds to orientation reversal of the 3-manifold. Our new resurgent perspective leads to a practical numerical algorithm that generates q-series which are dual to unary q-series composed of false theta functions. Until recently, these duals were only known in a limited number of cases, essentially based on Ramanujan’s mock theta functions, and the common belief was that the duals might not even exist in the general case. Resurgence analysis identifies as primary objects Mordell integrals: up to changes of variables, they are Laplace transforms of resurgent functions. Their unique Borel summed transseries decomposition on either side of the Stokes line is simply the unique decomposition into real and imaginary parts. In turn, the latter are combinations of unary q-series in terms of q and its modular counterpart $\overset{\sim }{q}$ , and are resurgent by construction. The Mordell integral is analytic across the natural boundary of the q and $\overset{\sim }{q}$ series, and uniqueness of a similar decomposition which preserves algebraic relations on the other side of the boundary defines the unique boundary crossing of the q series. We demonstrate that this continuation can be efficiently implemented numerically. In the cases where unique mock modular identities are known, they are found by this numerical procedure, but the procedure can go well beyond the known list of identities. A particularly interesting feature of the resurgent approach is that it reveals new aspects, and is very different from other known approaches based on indefinite theta series, Appell-Lerch sums, and representation theory of logarithmic vertex operator algebras.

Chern-Simons theories↗
DOE OSTI2025

Viral‐mediated delivery of morphogenic regulators enables leaf transformation in Sorghum bicolor (L.)

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom (Bbm), Wuschel2 (Wus2), Wuschel-like homeobox protein 2a (Wox2a) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Data for "Viral-mediated Delivery of Morphogenic Regulators Enables Leaf Transformation in Sorghum bicolor (L.)"

Recent advancements in monocot transformation, using leaf tissue as explant material, have expanded the number of grass species capable of transgenesis. However, the complexity of vectors and reliance on inducible excision of essential morphogenic regulators have so far limited widespread application. Plant RNA viruses, such as Foxtail Mosaic Virus (FoMV), present a unique opportunity to express morphogenic regulator genes, such as Babyboom ( Bbm ), Wuschel2 ( Wus2 ), Wuschel-like homeobox protein 2a ( Wox2a ) and the GROWTH-REGULATING FACTOR 4 (GRF4) GRF-INTERACTING FACTOR 1 (GIF1) fusion protein transiently in leaf explant tissues. Furthermore, altruistic delivery of conventional and viral vectors could provide opportunities to simplify vectors used for leaf transformation—facilitating vector optimization and reducing reliance on morphogenic regulator gene integration. In this study, both viral and conventional T-DNA vectors were tested for their ability to promote the formation of embryonic calli, a critical step in leaf transformation protocols, using Sorghum bicolor leaf explants. Although conventional leaf transformation vectors yielded viable embryonic calli (43.2 ± 2.9%: GRF4-GIF1, 50.2 ± 3%: Bbm/Wus2), altruistic conventional vectors employing the GRF4-GIF1 morphogenic regulator resulted in improved efficiencies (61.3 ± 4.7%). Altruistic delivery was further enhanced with the use of viral vectors employing both GRF4-GIF1 and Bbm/Wus2 regulators, resulting in 75.1 ± 2.3% and 79.2 ± 2.5% embryonic calli formation, respectively. Embryonic calli generated from both conventional and viral vectors produced shoots expressing fluorescent reporters, which were confirmed using molecular analysis. This work provides an important proof-of-concept for the use of both altruistic vectors and viral-expressed morphogenic regulators for improving plant transformation.

gene editing↗
DOE OSTI2025

Dynamics of McMillan mappings II. axially symmetric map

Here, in this article, we investigate the transverse dynamics of a single particle in a model integrable accelerator lattice, based on a McMillan axially-symmetric electron lens. Although the McMillan e-lens has been considered as a device potentially capable of mitigating collective space charge forces, some of its fundamental properties have not been described yet. The main goal of our work is to close this gap and understand the limitations and potentials of this device. It is worth mentioning that the McMillan axially symmetric map provides the first-order approximations of dynamics for a general linear lattice plus an arbitrary thin lens with motion separable in polar coordinates. Therefore, advancements in its understanding should give us a better picture of more generic and not necessarily integrable round beams. In the first part of the article, we classify all possible regimes with stable trajectories and find the canonical action-angle variables. This provides an evaluation of the dynamical aperture, Poincaré rotation numbers as functions of amplitudes, and thus determines the spread in nonlinear tunes. Also, we provide a parameterization of invariant curves, allowing for the immediate determination of the map image forward and backward in time. The second part investigates the particle dynamics as a function of system parameters. We show that there are three fundamentally different configurations of the accelerator optics causing different regimes of nonlinear oscillations. Each regime is considered in great detail, including the limiting cases of large and small amplitudes. In addition, we analyze the dynamics in Cartesian coordinates and provide a description of observable variables and corresponding spectra.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Discovery and engineering of enzymes for new-to-nature photobiocatalysis

Photobiocatalysis integrates enzymatic catalysis with photochemistry, enabling challenging radical transformations with high selectivity under mild conditions. Early developments in this field were largely driven by the discovery that enzyme-bound cofactors can form photoactive charge–transfer complexes with substrates, thereby initiating radical chemistry upon light irradiation. Recent advances, however, have substantially expanded the mechanistic landscape of photobiocatalysis through diverse mechanisms. This review summarizes major developments in photobiocatalysis reported since 2024. Rather than cataloging individual reactions, we focus on the fundamental mechanisms of radical generation and interception within enzyme active sites, and discuss how these mechanistic principles guide the discovery, engineering, and design of enzymes for new-to-nature photobiocatalysis.

Bai, Zibo [University of Illinois Urbana-Champaign↗
DOE OSTI2025

Efficient Synthetic Natural Gas Production from Direct Air Capture Using Titania-Based Dual Function Materials

Converting atmospheric CO2 into methane offers a compelling pathway to store intermittent renewable electricity and enhance energy security using existing natural gas infrastructure. However, current CO2 utilization approaches remain energy- and capital-intensive, largely due to the need for separate capture, purification, and conversion steps. Integrating CO2 capture with catalytic methanation represents a transformative strategy for process intensification on both the unit operation and molecular levels. We report a series of Ru-Na/TiO2 dual function materials (DFMs) for a reactive carbon capture (RCC) process consisting of simulated direct air capture and subsequent CO2 methanation (DACM). Superior methane desorption purity was observed on TiO2-based DFMs (>94 %) relative to state-of-the-art Al2O3-supported DFMs (77 %). Modifying the process to begin CO2 adsorption immediately following the methanation stage, rather than beginning adsorption near ambient temperature, resulted in >97 % methane desorption purity, suitable for injection into the natural gas pipeline without additional CO2 separation steps.

organic↗
DOE OSTI2026

Bioelectrocatalytic conversion of CO₂ to PHA bioplastics using engineered methylotrophs

The sustainable generation of biodegradable plastics represents an opportunity to capture atmospheric CO 2 while reducing plastic waste accumulation in the environment. This study implements an integrated platform for bioelectrocatalytic CO 2 conversion to medium-chain-length polyhydroxyalkanoates (mcl-PHAs). Immobilizing cobalt phthalocyanine electrocatalysts on a covalent-organic framework in a gas recirculation electrolyzer enabled CO 2 -to-methanol conversion with a carbon conversion efficiency of 98%. Integration of polymer biosynthesis pathways enabled Methylotuvimicrobium alcaliphilum 20Z R to produce ~20% mcl-PHA of the dry cell weight with a CO 2 -to-bioproducts carbon conversion efficiency of 50%. This cell line was adapted to high sodium bicarbonate media, eliminating costly intermediate separation steps while improving economic potential. Transcriptomic analysis revealed sulfate transporters and peptidoglycan biosynthesis as key pathways involved in sodium bicarbonate halotolerance. Altogether, this research presents a foundation for integrating divergent chemical and biological processes into a transformative electrobiomanufacturing platform, addressing the need for alternative pipelines for generating valuable plastics and chemicals.

CO2 utilization↗
DOE OSTI2025

Integrating Experiments and Simulations to Reveal Anisotropic Growth Mechanisms and Interfaces of a One-Dimensional Zeolite

Zeolites are nanoporous crystalline materials critical for diverse industrial applications, yet their growth mechanisms are poorly understood. Here, this study presents a novel integrated framework combining experimental synthesis, high-resolution imaging, coarse-grained molecular dynamics simulations, and computer vision to uncover the mechanisms of growth of SSZ-24, a 1D channel zeolite. We demonstrate how synthesis conditions, such as temperature and reactant concentration, govern crystal anisotropy and surface roughness with growth dynamics differing markedly by crystallographic orientation. Along the channels, growth involves minimal energy barriers and rapid nucleation, resulting in rough surfaces. In contrast, growth perpendicular to the channels requires cooperative molecular organization and is highly sensitive to thermodynamic and kinetic conditions, yielding smooth anisotropic surfaces under low driving forces. By simulating transmission electron microscopy (TEM) images, we bridge molecular-scale simulations with experimental observations, identifying distinct growth mechanisms along different crystal planes. This work offers molecular-level insights into zeolite crystallization, advancing the rational design of nanoporous materials. The integration of cross-disciplinary methodologies establishes a transformative framework for optimizing zeolite synthesis, with implications for broader classes of materials.

Bertolazzo, Andressa A. [Univ. of Utah, Salt Lake ↗
DOE OSTI2025

Novel Deep Learning Transformer Model for Short to Sub‐Seasonal Streamflow Forecast

Accurate short-to-subseasonal streamflow forecasts are becoming crucial for effective water management in an increasingly variable climate. However, streamflow forecast remains challenging over extended lead times, uncertainty in meteorological inputs, and increased frequency and variability in extreme weather and climate events. We implemented a Future Time Series Transformer (FutureTST) model for streamflow forecasting that separately integrates past meteorological and streamflow data while incorporating future weather conditions. FutureTST achieves a mean Nash-Sutcliffe Efficiency (NSE) of 0.82 to 0.67 for 1- to 30-day streamflow forecasts. Incorporating upstream streamflow information improved forecast accuracy by up to 10%. During real-time forecast, FutureTST maintains higher forecast skills of 9.03 for 1-day and 5.74 for 14-day forecasts. In contrast, calibrated process-based hydrological model forecasts become unreliable beyond a 4-day lead time. Our findings demonstrate the potential of FutureTST as a reliable streamflow forecasting tool that offers a valuable addition to operational flood monitoring systems and climate-resilient decision-making.

Ambika, Anukesh Krishnankutty [Oak Ridge National ↗
DOE OSTI2020

Unified Medical Language System resources improve sieve-based generation and Bidirectional Encoder Representations from Transformers (BERT)–based ranking for concept normalization

Concept normalization, the task of linking phrases in text to concepts in an ontology, is useful for many downstream tasks including relation extraction, information retrieval, etc. We present a generate-and-rank concept normalization system based on our participation in the 2019 National NLP Clinical Challenges Shared Task Track 3 Concept Normalization. The shared task provided 13 609 concept mentions drawn from 100 discharge summaries. We first design a sieve-based system that uses Lucene indices over the training data, Unified Medical Language System (UMLS) preferred terms, and UMLS synonyms to generate a list of possible concepts for each mention. We then design a listwise classifier based on the BERT (Bidirectional Encoder Representations from Transformers) neural network to rank the candidate concepts, integrating UMLS semantic types through a regularizer. Our generate-and-rank system was third of 33 in the competition, outperforming the candidate generator alone (81.66% vs 79.44%) and the previous state of the art (76.35%). During postevaluation, the model’s accuracy was increased to 83.56% via improvements to how training data are generated from UMLS and incorporation of our UMLS semantic type regularizer. Analysis of the model shows that prioritizing UMLS preferred terms yields better performance, that the UMLS semantic type regularizer results in qualitatively better concept predictions, and that the model performs well even on concepts not seen during training. Our generate-and-rank framework for UMLS concept normalization integrates key UMLS features like preferred terms and semantic types with a neural network–based ranking model to accurately link phrases in text to UMLS concepts.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2025

A Simple, Scalable Large Deformation Solid Mechanics Implementation in the MOOSE Framework

This article describes a large deformation solid mechanics solver implemented as part of the freely available and open source MOOSE finite element simulation framework. The article documents the choices made in developing the solid mechanics framework and describes novel formulations for the gradient operator and constitutive modeling framework made to simplify implementations of different coordinate systems, stabilized gradient operators, and different constitutive model inputs and outputs. In the process, the article describes a new formulation that casts objective integration of the Cauchy stress as a linear transformation of the small stress rate. Finally, the article presents key implementation details and examines the parallel efficiency of the solid mechanics solver implemented in MOOSE. The implementation retains a good weak scaling efficiency beyond 1,000 parallel processes. The article includes a discussion of the factors limiting the parallel efficiency of implicit, large deformation solid mechanics codes on current high-performance computers, with the main current limitation being the scalability of the algebraic multigrid methods used to solve the linearized equilibrium equations.

Applied computing → Computer-aided design↗
DOE OSTI2020

High Penetration Power Electronics Grid: Modeling and Simulation Gap Analysis

Increased penetration of power electronics in the grid is happening through development of high-power drives (like in Type 3 or 4 wind turbines, industrial drives, etc.), high-voltage direct current (HVdc) systems, flexible alternating current transmission systems (FACTS), energy storage systems (ESSs), inverter-based renewables like solar and wind, electric vehicle chargers, and other technologies. Ongoing research and development in new power electronic technologies including, but not limited to, solid-state power substations (SSPS), extreme fast charging (XFC), solid-state transformers, and multi-port power electronics that integrate multiple sources/loads will further increase penetration levels. To ensure stakeholders can integrate high penetration of power electronic technologies safely and reliably requires tools and methods to assess and evaluate their impact on the grid. Objectives: This report surveys, assesses, and analyzes commercially available and open-source tools that can support the assessment and evaluation of power electronics in future grids with high penetration levels. The study includes aspects that range from power flow analysis to dynamics evaluation (including hardware-in-the-loop – HIL testing) for such systems. The challenges and gaps associated with the current generation of toolsets available to assess the technical impact of introducing high penetration of power electronics are reported. The method is summarized in Figure ES-1.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Ramping Up the Ramping Capability: India's Power System Transition

The Indian power system is going through a period of transformation with plans for renewable energy to be integrated at a large scale over the next decade. Increasing thrust is being given to flexible operation of existing generating resources. Ramping is one of the key attributes of flexibility. With implementation of national level security constrained economic dispatch (SCED), the national power system operator of India (POSOCO) has started to observe occasional constraints in ramping capability obtained from generators under SCED, which could get further aggravated with more variable renewable energy (VRE). This paper focuses on complexities of ramping and the challenges with high shares of renewables in the Indian context.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Tailoring Cementitious Materials Towards Value-Added Use of Large CO 2 Volumes

Hydraulic cements with alternative chemistries were developed for large-volume and value-added use of carbon dioxide. The hydraulic cements were processed using the energy-efficient mechanochemical technique at room temperature and atmospheric pressure. Carbon dioxide was captured directly from combustion emissions during processing. For this purpose, mechanochemical processing of hydraulic cements was accomplished under a flow of combustion emissions prior to the release of emissions to the atmosphere. The process removed a significant fraction of carbon dioxide from combustion emissions. The hydraulic cements captured carbon dioxide at about 10% of their weight. Two hydraulic cement chemistries were developed, and their mechanochemical processing was successfully scaled-up. The characteristic feature of one chemistry was its relatively low (near-neutral) pH where the integration of carbon dioxide yielded clear value. The second cement chemistry was based on alkali activation of industrial wastes. This chemistry could make value-added use of carbon dioxide, but it had to be refined to control the pH drop caused by CO 2 integration. These two cements render binding effects upon hydration by forming a combination of stable carbonates and aluminosilicates or phosphates. Efforts to develop cement chemistries based solely on carbonates were not successful. The mechanochemical process was found to integrate carbon dioxide into the alternative cement chemistries in the form of disordered and metastable carbonates. During hydration reactions, the disordered/metastable carbonates are either transformed into stable carbonate phases with desired binding efforts, or carbonates get integrated into the primary inorganic binders (hydrates). When compared with mechanochemical processing in pure carbon dioxide, mechanochemical processing in combustion emissions produced hydraulic cements with improved engineering properties. The mechanochemical process was scaled-up, and its variables as well as the raw materials formulations were optimized for implementation at pilot scale. Scale-up was found to enhance the carbon capture potential and the engineering qualities of the resulting hydraulic cements. This was because scale-up raises the intensity of mechanical energy input to raw materials. Certain mechanochemical phenomena cannot be induced, irrespective of the cumulative mechanical energy input, unless the intensity of impact is raised above a minimum level that cannot be achieved in laboratory-scale implementation of the process. Due to this effect, the duration of the mechanochemical process as well as its energy demand could be reduced significantly (by an order of magnitude) upon transition from laboratory to pilot scale, with the hydraulic cements produced at pilot scale offering engineering properties that were superior to those realized in laboratory-scale mechanochemical processing. The hydraulic cements produced at pilot scale via mechanochemical processing under a flow of combustion emissions were thoroughly characterized. They were found to meet standard requirements for ‘General Use’ hydraulic cements. They were compatible with the industrial-scale concrete production and construction practices that are used with the currently prevalent hydraulic cements. The new hydraulic cements with integrated carbon dioxide were found to offer distinct advantages over the currently prevalent Portland cement in terms of net carbon footprint and energy content. The combined raw materials and energy costs of the new hydraulic cements are competitive, and major cost savings can be realized because of the simplified production process that significantly lowers the capital investment in cement production plants. Mechanochemical processing of the new hydraulic cements under a flow of combustion emissions can be implemented using some existing components of cement manufacturing plants; this facilitates adoption of the technology by the cement industry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deployment of inference as a service at the US CMS Tier-2 data centers

Coprocessors, especially GPUs, will be a vital ingredient of data production workflows at the HL-LHC. At CMS, the GPU-as-a-service approach for production workflows is implemented by the SONIC project (Services for Optimized Network Inference on Coprocessors). SONIC provides a mechanism for outsourcing computationally demanding algorithms, such as neural network inference, to remote servers, where requests from multiple clients are intelligently distributed across multiple GPUs by a load-balancing service. This talk highlights the recent progress in deploying SONIC at selected U.S. CMS Tier-2 data centers. Using realistic CMS Run3 data processing workflows, such as those containing transformer-based algorithms, we demonstrate how SONIC is integrated into the production-like environment to enable accelerated inference offloading. We will present developments from both the client and server sides, including production job and data center configurations for NVIDIA and AMD GPUs. We will also present performance scaling benchmarks and discuss the challenges of operating SONIC in CMS production, such as server discovery, GPU saturation, fallback server logic, etc.

Holzman, Burt↗