Search NASA⌕ Search

SEARCH · Search NASA

Results for “internal flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Development and validation of an advanced low-order panel method

A low-order potential-flow panel code, PMARC, for modeling complex three-dimensional geometries, is currently being developed at NASA Ames Research Center. The PMARC code was derived from a code named VSAERO that was developed for Ames Research Center by Analytical Methods, Inc. In addition to modeling potential flow over three-dimensional geometries, the present version of PMARC includes several advanced features such as an internal flow model, a simple jet wake model, and a time-stepping wake model. Data management within the code was optimized by the use of adjustable size arrays for rapidly changing the size capability of the code, reorganization of the output file and adopting a new plot file format. Preliminary versions of a geometry preprocessor and a geometry/aerodynamic data postprocessor are also available for use with PMARC. Several test cases are discussed to highlight the capabilities of the internal flow model, the jet wake model, and the time-stepping wake model.

Ashby, Dale L.↗
NASA NTRS1990

Heterogeneities in the thickness of the elastic lithosphere of Mars - Constraints on heat flow and internal dynamics

Estimates of the effective thickness of the Martian elastic lithosphere are reviewed, and these thickness values are converted to estimates of lithospheric thermal gradients and surface heat flow by means of temperature-dependent strength envelopes. The results of estimates of thermal gradients for various locations, together with the information on the geological epochs appropriate to each estimate of thermal gradient, were related to the global heat flux, the interior thermal evolution, the Martial lithospheric reheating mechanisms, and the evolution of major volcanic provinces on Mars.

Solomon, Sean C.↗
NASA NTRS1991

Laser anemometry - Advances and applications 1991; Proceedings of the 4th International Conference, Cleveland, OH, Aug. 5-9, 1991. Vols. 1 & 2

The papers presented in this volume provide an overview of the latest advances in laser anemometry and optical flow diagnostics. Topics discussed include turbulence, jets, and chaos; novel optical techniques for velocity measurements; chemical reactions and combusting flows; and LDA/CFD interface. Attention is also given to particle image velocimetry, high speed flows and aerodynamic flows, internal flows, particle sizing, optics and signal processing, two-phase flows, and general fluid mechanics applications.

Dybbs, Alexander↗
NASA NTRS1974

Hypersonic ramjet experiment project. Phase 1: Computer program description, ramjet and scramjet cycle performance

A computer program was developed to describe the performance of ramjet and scramjet cycles. The program performs one dimensional calculations of the equilibrium, real-gas internal flow properties of the engine. The program can be used for the following: (1) preliminary design calculation and (2) design analysis of internal flow properties corresponding to stipulated flow areas. Only the combustion of hydrogen in air is considered in this case.

Jackson, R. J.↗
NASA NTRS1990

Flow studies in close-coupled ventral nozzles for STOVL aircraft

Flow in a generic ventral nozzle system was studied experimentally and analytically with the PARC3D computational fluid dynamics program in order to evaluate the program's ability to predict system performance and internal flow patterns. A generic model of a tailpipe with a rectangular ventral nozzle, about 1/3 of full size, was tested with unheated air at steady state pressure ratios up to 4.0. The end of the tailpipe was closed to simulate a blocked exhaust nozzle. Flow behavior into and through the ventral duct is discussed and illustrated with paint streak flow visualization photographs. PARC3D graphic images are shown for comparison with the experimental photographs. The program successfully predicted internal flow patterns; it also computed thrust and discharge coefficients within 1 pct. of measured values.

Mcardle, Jack G.↗
NASA NTRS1981

Numerical analysis of turbulent coaxial flow with internal heat generation

A computational method with which to obtain a physical understanding of the turbulent field of two coaxial jets entering an axisymmetric chamber is developed. Even the laminar field of this flow is quite complicated. This is due to the many different domains which exist in the field especially in the entrance region. Physically, three regions may be identified: the wall region, the initial region near the axis of symmetry and the mixing region. Advancing downstream, these regions change relative size with the ratio of the two jets' mass fluxes as the main parameter. The turbulent field of these flows is much more complicated due to the difference in the effective transport coefficients and turbulence level from region to region. However, being aware beforehand of the complications and the different regions of this field, the appropriate turbulence model and numerical scheme can be adjusted to treat the problem.

Lin, A.↗
NASA NTRS1990

Flow studies in close-coupled ventral nozzles for STOVL aircraft

Flow in a generic ventral nozzle system was studied experimentally and analytically with the PARC3D computational fluid dynamics program (a full Navier-Stokes equations solver) in order to evaluate the program's ability to predict system performance and internal flow patterns. A generic model of a tailpipe with a rectangular ventral nozzle, about one-third of full size, was tested with unheated air at steady-state pressure ratios up to 4.0. Measurements showed about 5.5 percent flow-turning loss and reasonable nozzle performance coefficients. The flow turned more than the designed 90 deg, causing an aftward axial component in the total thrust. Flow behavior into and through the ventral duct is discussed and illustrated with paint streak flow visualization photographs. PARC3D graphic images are shown for comparison with the experiment photographs. The program successfully predicted internal flow patterns; it also computed thrust and discharge coefficients within 1 percent of measured values.

Mcardle, Jack G.↗
NASA NTRS1989

Comparison of LDV measurements and Navier-Stokes solutions in a two-dimensional 180-degree turn-around duct

Results from an experimental and numerical investigation of turbulent subsonic flow inside a two-dimensional, strongly curved, 180 deg turn-around duct are presented. Data measured with a two-component, two-color laser Doppler velocimeter include profiles of mean axial velocity and local flow angle. Static pressure distributions are also measured. Results are obtained at a Mach number of 0.1, and at Reynolds numbers of 100,000 and a million based on channel height. Numerical calculations are performed using the incompressible Navier-Stokes equations with a Prandtl mixing length zero-equation turbulence model modified for internal flows. Theory and experiment are compared to evaluate the ability of the turbulence model to predict this class of internal flows with strong curvature.

Monson, Daryl J.↗
NASA NTRS1977

Investigation of Inlet Concepts for Maneuver Improvement at Transonic Speeds

A 15 percent scale lightweight fighter type inlet forebody was tested in the Ames 14 foot transonic wind tunnel at Mach numbers of 0.7, 0.9, and 1.04. The inlet was a two dimensional horizontal ramp system designed for a Mach number of 2.2. Four inlet devices designed to prevent or delay cowl-lip boundary layer separation or to improve the inlet internal flow characteristics at high angles of attack were investigated. The devices used to control cowl-lip separation consisted of cowl leading edge flaps, slotted flaps, and tangential blowing. To improve the internal flow characteristics, discrete jet nozzle flows were directed downstream and parallel to the duct surface in the subsonic diffuser to energize the wall boundary layer. The discrete jets used in the subsonic diffuser were also tested in combination with each of the cowl leading edge devices. Test measurements included engine-face total pressure recovery, steady state distortion, dynamic distortion, duct boundary layer profiles, and duct-surface static pressures.

Latham, E.↗
NASA NTRS2004

The Performance of a Subsonic Diffuser Designed for High Speed Turbojet-Propelled Flight

An initial-phase subsonic diffuser has been designed for the turbojet flowpath of the hypersonic x43B flight demonstrator vehicle. The diffuser fit into a proposed mixed-compression supersonic inlet system and featured a cross-sectional shape transitioning flowpath (high aspect ratio rectangular throat-to-circular engine face) and a centerline offset. This subsonic diffuser has been fabricated and tested at the W1B internal flow facility at NASA Glenn Research Center. At an operating throat Mach number of 0.79, baseline Pitot pressure recovery was found to be just under 0.9, and DH distortion intensity was about 0.4 percent. The diffuser internal flow stagnated, but did not separate on the offset surface of this initial-phase subsonic diffuser. Small improvements in recovery (+0.4 percent) and DH distortion (-32 percent) were obtained from using vane vortex generator flow control applied just downstream of the diffuser throat. The optimum vortex generator array patterns produced inflow boundary layer divergence (local downwash) on the offset surface centerline of the diffuser, and an inflow boundary layer convergence (local upwash) on the centerline of the opposite surface.

Biesiadny, Thomas J.↗
NASA NTRS1975

Internal cowl-separation at high incidence angles

Internal flow separation at large incidence angles is studied on the basis of wind-tunnel pressure data for six axisymmetric inlet geometries. The inlet geometric variables investigated are the angle of incidence, the throat Mach number, the internal lip contraction ratio, 'sharpness' of the external shape, and freestream velocity. It is shown that an increase in lip contraction ratio delays internal flow separation, while an increase in the sharpness of the external profile tends to reduce the angle of incidence at which complete flow separation occurs. It is also shown that inlet flow separation is subject to scale effects associated with the boundary layer on the cowl surface. The scale effects are particularly pronounced at very high throat Mach numbers.

Jakubowski, A. K.↗
NASA NTRS1995

General Fluid System Simulation Program to Model Secondary Flows in Turbomachinery

The complexity and variety of turbomachinery flow circuits created a need for a general fluid system simulation program for test data anomaly resolution as well as design review. The objective of the paper is to present a computer program that has been developed to support Marshall Space Flight Center's turbomachinery internal flow analysis efforts. The computer program solves for the mass. energy and species conservation equation at each node and flow rate equation at each branch of the network by a novel numerical procedure which is a combination of both Newton-Ralphson and successive substitution method and uses a thermodynamic property program for computing real gas properties. A generalized, robust, modular, and 'user-friendly' computer program has been developed to model internal flow rates, pressures, temperatures, concentrations of gas mixtures and axial thrusts. The program can be used for any network for compressible and incompressible flows, choked flow, change of phase and gaseous mixturecs. The code has been validated by comparing the predictions with Space Shuttle Main Engine test data.

Majumdar, Alok K.↗
NASA NTRS1987

Application of CFD codes to the design and development of propulsion systems

The internal flows of aerospace propulsion engines have certain common features that are amenable to analysis through Computational Fluid Dynamics (CFD) computer codes. Although the application of CFD to engineering problems in engines was delayed by the complexities associated with internal flows, many codes with different capabilities are now being used as routine design tools. This is illustrated by examples taken from the aircraft gas turbine engine of flows calculated with potential flow, Euler flow, parabolized Navier-Stokes, and Navier-Stokes codes. Likely future directions of CFD applied to engine flows are described, and current barriers to continued progress are highlighted. The potential importance of the Numerical Aerodynamic Simulator (NAS) to resolution of these difficulties is suggested.

Lord, W. K.↗
NASA NTRS1990

Real-time simulation of supersonic inlets

A previously published real-time simulation algorithm, the matrix stability region placement (MSRP) method, is used to simulate a small perturbation model of the NASA Lewis Mach 2.5 40-60 mixed compression inlet. The model is representative of high-speed internal flow propulsion systems which can be approximated as quasi-one-dimensional flows. The resulting system of equations, which is stiff, is also simulated by the second-order Adam-Bashforth method. It is shown that the MSRP method can be used to simulate small perturbation models of high-speed internal flow propulsion systems in real time.

Mossayebi, F.↗
NASA NTRS1990

Transitions from Hadley to Rossby flows in internally forced rotating spherical systems

The possibility of global-scale transitions between the Hadley and Rossby atmospheric regimes is investiated using a simple three-dimensional rotating spherical model without a boundary layer structure, bottom topography, or cumulus friction, and the expected occurrence of the Hadley to Rossby transition is demonstrated. It is shown that a transition from Hadley flow to wavenumber-5 Rossby flow is preferred, in agreement with standard baroclinic instability results. This result gives a reasonable Rossby wave bifurcation from the Hadley solution. For the cases examined, it was found that the upper symmetric Hadley regime does not exist and that the Hadley to Rossby transition depends on the values of the eddy viscosities.

Higgins, Wayne R.↗
NASA NTRS1983

A one-dimensional unsteady model of dual mode scramjet operation

A one-dimensional unsteady model and code have been developed which can handle internal flows involving area change, heat release, transients and coupled inviscid core-boundary layer flows. The model has been shown to work well in diverging channels with a supersonic entrance Mach number and unseparated boundary layers. Transient flows have also been studied. The model needs no prior knowledge of shock (or shocks) location and can be extended to two or three dimensions. The results show that the one-dimensional unsteady model developed here can be used for analysis of internal flows as occur in scramjet combustors.

Bussing, T. R. A.↗
NASA NTRS1981

Navier-Stokes solutions for nonaxisymmetric nozzle flows

The compressible Navier-Stokes equations for two-dimensional and three-dimensional flow are solved for nonaxisymmetric nozzle configurations. Both internal flow alone and combined internal and external flow cases are considered. An implicit approximate factorization algorithm is employed to solve the governing equations which are cast in terms of a body-fitted coordinate system. Turbulence closure is accomplished with a composite algebraic model. Two-dimensional results for a wedge plug nozzle flow in the form of surface pressures compare favorably with experimental data. Three-dimensional calculations for two nonaxisymmetric nozzles are also presented and compared with data.

Swanson, R. C.↗
NASA NTRS1992

A two-phase restricted equilibrium model for combustion of metalized solid propellants

An Eulerian-Lagrangian two-phase approach was adopted to model the multi-phase reacting internal flow in a solid rocket with a metalized propellant. An Eulerian description was used to analyze the motion of the continuous phase which includes the gas as well as the small (micron-sized) particulates, while a Lagrangian description is used for the analysis of the discrete phase which consists of the larger particulates in the motor chamber. The particulates consist of Al and Al2O3 such that the particulate composition is 100 percent Al at injection from the propellant surface with Al2O3 fraction increasing due to combustion along the particle trajectory. An empirical model is used to compute the combustion rate for agglomerates while the continuous phase chemistry is treated using chemical equilibrium. The computer code was used to simulate the reacting flow in a solid rocket motor with an AP/HTPB/Al propellant. The computed results show the existence of an extended combustion zone in the chamber rather than a thin reaction region. The presence of the extended combustion zone results in the chamber flow field and chemical being far from isothermal (as would be predicted by a surface combustion assumption). The temperature in the chamber increases from about 2600 K at the propellant surface to about 3350 K in the core. Similarly the chemical composition and the density of the propellant gas also show spatially non-uniform distribution in the chamber. The analysis developed under the present effort provides a more sophisticated tool for solid rocket internal flow predictions than is presently available, and can be useful in studying apparent anomalies and improving the simple correlations currently in use. The code can be used in the analysis of combustion efficiency, thermal load in the internal insulation, plume radiation, etc.

Sabnis, J. S.↗