Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion adsorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Alkylation of lignin-derived aromatic oxygenates with cyclic alcohols on acidic zeolites

Moderately strong BAS and spacious microporous environments (i.e., large-pore acidic zeolites HBEA and HY) are important criteria for efficient alkylation of phenols with cyclic alcohols and alkenes, while very strong BAS appear to be responsible for catalyst deactivation. BAS confined in HBEA and HY pores show substantially higher turnover frequencies compared to solids without molecularly sized pore constraints. HBEA favors the formation of mono-alkylates, while enhanced formation of di-alkylates is observed on HY. Dehydration of alcohols always dominates over the alkylation at the onset of the reaction. Carbenium ions, the direct electrophile for aromatic oxygenates, are produced mainly from the adsorption and protonation of olefins. The present study shows that for the alkylation of phenols and cyclic alcohols in apolar liquids, the alcohol concentration should be kept low to avoid the formation of unreactive surface dimers and mitigate their inhibitory effects on olefin adsorption and protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Contrasting Effects of Catecholate and Hydroxamate Siderophores on Molybdenite Dissolution

Molybdenum (Mo) is essential for many enzymes but is often sequestered within minerals, rendering it not readily bioavailable. Metallophores, metabolites secreted by microorganisms and plants, promote mineral dissolution to increase metal bioavailability. However, interactions between metallophores and Mo-bearing minerals remain unclear. Here, in this study, catecholate protochelin and hydroxamate desferrioxamine B (DFOB) were utilized to examine their effects on dissolution of the common Mo-bearing mineral, molybdenite (MoS 2 ), under both oxic and anoxic conditions. Protochelin promoted molybdenite dissolution under oxic conditions with the formation of MoO 3 on the surface and Mo-siderophore complexes in solution. This was attributed to air-oxidation of both molybdenite and protochelin, as evidenced by lack of dissolution under anoxic conditions but enhanced dissolution by either pre-oxidized protochelin or pre-oxidized molybdenite. Liquid chromatography-mass spectroscopy (LC-MS), X-ray photoelectron spectroscopy (XPS), and Time-of-flight secondary ion mass spectrometry (ToF-SIMS) analyses revealed degradation of protochelin and adsorptions of its byproducts on molybdenite surface to promote dissolution. Conversely, DFOB inhibited molybdenite dissolution under both oxic and anoxic conditions, likely attributed to surface adsorption of DFOB and its weak complexation with Mo(VI) at the circumneutral pH. This work highlights the need to consider the balance between promoting and inhibitory effects of different metallophores on Mo-mineral dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Real-time Characterization of the Fine Structure and Dynamics of an Electrical Double Layer at Electrode-electrolyte Interfaces

The chemisorption of species from supporting electrolytes on electrode surfaces is ubiquitous in electrochemical systems and affects the dynamics and mechanism of various electrochemical reactions. The understanding of chemical structure and property of the resulting electrical double layer is vital but limited. In this work, we operando probed the electrochemical interface between a gold electrode surface and a common supporting electrolyte, phosphate buffer, using our newly developed in situ liquid secondary ion mass spectrometry. We surprisingly found that on the positively charged gold electrode surface sodium cations were anchored in the stern layer in a partially dehydrated form by formation of compact ion pairs with the accumulated phosphate anions. The resulting strong and dense adsorption phase was further revealed to retard the electro-oxidation reaction of ascorbate. This finding addressed one major gap in the fundamental science of electrode-electrolyte interfaces that where and how the cations reside in the double layer to impose effects on electrochemical reactions, providing insights into engineering of better electrode-electrolyte interfaces in electrochemical processes.

Zhang, Yanyan↗
DOE OSTI2022

Removal and recovery of ammonia from simulated wastewater using Ti3C2Tx MXene in flow electrode capacitive deionization

Abstract Flowing electrode capacitive deionization systems (FE-CDI) have recently garnered attention because of their ability to prevent cross contamination and operate in uninterrupted cycles ad infinitum. Typically, FE-CDI electrodes suffer from low conductivity, reducing deionization performance. Utilization of higher mass loadings to combat this leads to poor rheological properties. Herein, Ti 3 C 2 T x MXene was introduced as 1 mg mL −1 slurry electrodes in an FE-CDI system for the removal and recovery of ammonia from simulated agricultural wastewater. The electrode performance was evaluated by operating the FE-CDI system with a feed solution of 500 mg L −1 NH 4 Cl running in batch mode at a constant voltage of 1.20 and −1.20 V in charging and discharging modes, respectively. Despite the low loading, Ti 3 C 2 T x flowing electrodes showed markedly improved performance, achieving 60% ion removal efficiency in a saturation time of 115 min with an adsorption capacity of 460 mg g −1 . To understand the high adsorption performance of the electrodes, physiochemical and structural analysis was done via a variety of characterization techniques such as SEM, TEM, XRD, DLS, and Raman spectroscopy. Cyclic voltammetry and galvanostatic charge/discharge profiles were obtained to evaluate the electrochemical properties of the electrodes. The system proved to be an energy-saving technology by exhibiting a charge efficiency of 58–70% while operating at an energy consumption of 0.45 kWh kg −1 . A 92% regeneration efficiency showed that the electrodes were stable and suitable for long term and scalable usage. The results demonstrate that MXenes have the potential to improve the FE-CDI process for energy-efficient removal and recovery of ammonia.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic Nanoparticle Extraction of Lithium from Produced Waters - CRADA 483 (Final Report)

The demand for lithium in the energy production industry is expected to increase sharply, development of simple and cost-effective techniques for lithium production and recovery from various lithium sources is essential. In this project, core/shell magnetic nanoparticles were successfully designed to selectively extract lithium from aqueous lithium sources as an extension of Pacific Northwest National Laboratory’s magnetic nanofluid extraction technology. The core/shell magnetic nanoparticles are composed of manganese oxide-based lithium ion sieve shells, which allow selective lithium uptake from brines with multiple coexisting ions, over iron oxide cores, which can respond to external magnetic fields for effective recovery and reuse of adsorbents from a liquid. The synthesized lithium ion-sieves and core/shell magnetic nanoparticles were characterized using several techniques to reveal their crystallinity and morphology. The lithium uptake properties of the lithium ion-sieves and core/shell magnetic nanoparticles were evaluated in terms of lithium adsorption capacity, removal percentage, selectivity, and cycling performance in simulated and natural brines. Magnetic properties of the core/shell magnetic nanoparticles were tested by measuring magnetic saturation, and magnetic response of colloidal solutions containing the core/shell magnetic nanoparticles was tested with permanent magnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Adsorption of hydroxamic acid ligands for improved extraction of rare earth elements from monazite ores

Efficient separation of rare earth element (REE) ores via froth flotation requires the development of novel ligands with enhanced adsorption capacity and selectivity. To realize these advances, understanding the mechanisms underlying interactions between the ligand and mineral surfaces is essential. This study systematically evaluates the adsorption behavior of alkyl- and aromatic alkyl-substituted hydroxamic acid ligands on monazite surfaces using complementary spectroscopic techniques, including UV–visible (UV–vis) spectroscopy, Raman spectroscopy, infrared spectroscopy, and vibrational sum frequency generation (SFG) spectroscopy, together with the ab initio molecular dynamics (AIMD) simulations. Among the studied ligands, octanohydroxamic acid (OHA) and 4-ethoxy-N,2-dihydroxybenzamide (EDHBA) exhibit high adsorption capacity under basic pH (8–10) by forming multilayers on the surface. OHA has a higher equilibrium adsorption capacity compared to EDHBA, but it forms a less stable multilayer susceptible to disruption in the presence of interfering ions. AIMD results show that OHA adopts a single stable chelating geometry, while EDHBA exhibits multiple binding modes involving distinct interactions with La surface atoms and phosphate-bound oxygens, resulting in more complex adsorption kinetics. The variations in surface binding and intermolecular interactions observed between alkyl and aromatic molecules influence the differences in adsorption kinetics, equilibrium adsorption capacities on the mineral surface, and their flotation performance. This work provides valuable insight into the adsorption mechanism of ligands at mineral interfaces, which is crucial for guiding the design of new ligands with enhanced separation performance.

Zhou, Muchu [ORNL] (ORCID:0000000182650215)↗
DOE OSTI2025

Mechanism of Lithium Ion Exchange Into Spinel Manganese Oxide

Lithium manganese oxide (LMO) is an effective absorbent for lithium recovery from brines, characterized by its high adsorption capacity, excellent regeneration performance, and selectivity. Here, this study investigates the mechanisms of material degradation during lithium loading and unloading in LMO, employing a combination of time‐resolved Raman spectroscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Key findings reveal that the A 1g vibrational mode wavenumber shifts from 635 cm −1 at the onset of lithium ion exchange to 656 cm −1 after 12 min, indicating local symmetry loss and manganese (Mn) loss during lithium intercalation. The proposed lithium exchange mechanism involves initial occupation of tetrahedral interstitial voids, followed by migration into interstitial sites between Mn octahedral sites. Computational modeling suggests that the loss of symmetry in MnO cubane‐like groups occurs as lithium migrates, significantly affecting the Raman spectra. Importantly, the study demonstrates that after 100 cycles of lithium/hydrogen loading, a 24% loss in Mn is observed, which correlates with decreased structural stability; however, the structural integrity of LMO is enhanced when subjected to multiple cycles without complete loading. Here, these insights contribute to the understanding of LMO's performance in lithium recovery applications and highlight potential strategies to optimize its use in future technologies.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Sorption of Arsenate, Selenate, and Molybdate on the Barite (001) Surface

Interactions of ions with ionically bonded minerals such as barite (BaSO 4 ) influence the fate and transport of the ions, while the factors that control the sorption of toxic oxyanions on barite remain elusive. In this study, the sorption of arsenate, selenate, and molybdate on the barite (001) surface was examined at pH ~5 using in situ crystal truncation rod analysis, resonant anomalous X-ray reflectivity, and atomic force microscopy. The results show that arsenate and selenate mainly incorporate into the top monolayer of barite, while molybdate primarily adsorbs above the surface. The sorption coverage of arsenate is greater (by ~100%) than that of selenate but similar to that of molybdate. The different incorporation coverages between arsenate and selenate can be explained by their different protonation states at pH 5. The incorporated arsenate may be stabilized by hydrogen bonds between arsenate and oxygen atoms of neighboring sulfate compared to selenate, which exists predominantly in the deprotonated state. The adsorption of molybdate above the surface probably stems from a surface-induced oligomerization, as the anion and the oligomer may be too large for incorporation. Our observation of these different sorption mechanisms demonstrates how the physicochemical properties of the anions control the selective uptake of the toxic metals on the dominant surface of the ionically bonded mineral barite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective Removal of Perfluorobutyric Acid Using an Electroactive Ion Exchanger Based on Polypyrrole@Iron Oxide on Carbon Cloth

Perfluorabutyric acid (PFBA) is one classify of perfluoroalkyl and polyfluoroalkyl substances (PFASs), which is applied to wide-spread industry compounds. The removal of PFBA has attracted considerable scientific interest in recent decades because it caused environmental pollutions and human diseases. For removing PFASs from wastewater, the adsorption method has been commonly used for the remediation of PFASs. However, it is usually limited by the inevitable “secondary waster” produced in this treatment process. In this work, PFBA can be removed effectively by synergizing the electrically switched ion exchange (ESIX) and a novel nanostructured ion exchanger. Herein, the nanostructured ion exchanger is designed by coating polypyrrole (PPy) @ Fe 2 O 3 nanoneedle on carbon cloth (PPy@Fe 2 O 3 NN-CC). Overall, results show that PPy@Fe 2 O 3 NN-CC film enhances ion exchange speed and efficiency, which endures its high-capacity adsorption ability and rapid regeneration property, thereby reducing secondary waste. Moreover, ESIX based on PPy@Fe 2 O 3 NN-CC has high selectivity for adsorption of PFBA over Cl - , SO 4 2- and NO 3 - .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interfacial Chemistry Involved in Selective Separation of NMC/LMO and LCO/LMO Binary Cathode Materials by Froth Flotation Using Oleic Acid

The variability in cathode compositions within recycled lithium-ion battery (LIB) feedstocks poses a significant challenge to efficient downstream refining processes. This study demonstrates the feasibility of using froth flotation with oleic acid as a collector to selectively separate lithium nickel-manganese-cobalt oxide (NMC) and lithium cobalt oxide (LCO) from lithium manganese oxide (LMO) materials. Laboratory-scale flotation tests achieved an 80% separation efficiency in a single stage, producing a froth product with >90% purity of NMC/LCO at approximately 90% yield. Concurrently, the LMO materials were enriched in the sink product with ∼90% purity and ∼90% yield. This approach was further validated using recycled cathode materials, confirming its applicability to realistic feedstocks. The underlying mechanism governing the selective separation of NMC/LCO from LMO was investigated using ζ-potential measurements, contact angle measurements, bubble-particle attachment experiments, and X-ray photoelectron spectroscopy (XPS) analysis. Both contact angle and bubble-particle attachment results confirmed that oleic acid adsorption rendered NMC and LCO surfaces hydrophobic, thereby enhancing flotation recovery. At pH 5, oleic acid adsorbed preferentially onto NMC and LCO surfaces via electrostatic interactions, while exhibiting minimal adsorption on LMO surfaces. However, separation efficiency deteriorated at higher pH, which was attributed to the co-flotation of LMO materials caused by oleate chemisorption on MnOH + species. This work establishes froth flotation as a viable cathode/cathode separation strategy, providing a low-cost, scalable pathway to preconcentrate and enrich nickel-rich and cobalt-rich cathode active materials from incompatible cathode chemistries for direct recycling or hydrometallurgical processing. Furthermore, this study reveals, for the first time, the mechanism of oleate adsorption on the surface of different cathode materials.

PH↗
DOE OSTI2020

Functionalized Magnetic Nanoparticles for Technetium Sequestration from Groundwater

Technetium 99 (Tc) is among the most common environmental contaminants at DOE sites and one of the most common risk drivers in low- and high-level waste disposal sites. The majority of Tc is generated from anthropogenic sources, such as nuclear power plants, global weapons, nuclear storage facilities and medical applications. Through these sources, Tc contamination has been unintentionally introduced in to the environment. The most common chemical form of Tc is Tc(VII)O{sub 4}{sup -}. Due to its high solubility and mobility, Tc can enter the food chain and cause adverse health effects to humans. Currently, ion exchange resins and reduction processes are the most common approaches for Tc immobilization. Although these techniques have shown to be effective, they also possess major drawbacks, such as high cost, low adsorption capacity, and complex creation and maintenance. Therefore, development of more efficient and simple technologies for the remediation of Tc-contaminated systems are needed. Functionalized magnetic nanoparticles have been used to remove organic and inorganic contaminants from water resources. These nanoparticles have attracted extensive attention as an adsorbent material due to their large surface area, high efficiency, low-cost, easy functionalization and separation with a magnet. This study seek to develop functionalized magnetic iron oxide nanoparticles for the efficient removal of Tc and other heavy metal contaminants from water resources under ambient conditions. Objectives: Synthesize magnetic iron oxide nanoparticles and functionalize their surface with Cetyltrimethylammonium Bromide (CTAB) and tetraethyl-orthosilicate (TEOS). Characterize the synthesized nanoparticles using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS), Dynamic Light Scattering (DLS) and Zeta PALS. Perform adsorption studies to evaluate their adsorption behavior and capacity for (a) Technetium using Rhenium (ReO{sub 4}{sup -}) as a surrogate and (b) heavy metals, e.g. Cu{sup 2+}. Conclusions: Magnetic iron oxide nanoparticles were successfully functionalized with CTAB and TEOS. The functionalization of the iron oxide nanoparticles affects their surface charge and their hydrodynamic diameter. The addition of CTAB or TEOS decreased the hydrodynamic diameter of the nanoparticles due to repulsive and steric forces. The SEM micrographs show spherical nanoparticles of different sizes. The EDX analysis shows the presence of iron and oxygen from the iron oxide crystalline structure, and the different constituents of the CTAB and TEOS molecules. Proof-of-concept shows the successful adsorption of rhenium (ReO{sub 4}{sup -}) and copper Cu{sup 2+}) onto CTAB-Fe{sub 2}O{sub 3} and TEOS-Fe{sub 2}O{sub 3} respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Amine-appended metal-organic frameworks exhibiting a new adsorption mechanism for carbon dioxide separations

An adsorption material is disclosed that comprises a metal-organic framework and a plurality of ligands. The metal-organic framework comprising a plurality of metal ions. Each respective ligand in the plurality of ligands is amine appended to a respective metal ion in the plurality of metal ions of the metal-organic framework. Each respective ligand in the plurality of ligands comprises a substituted 1,3-propanediamine. The adsorbent has a CO 2 adsorption capacity of greater than 2.50 mmol/g at 150 mbar CO 2 at 40° C. Moreover, the adsorbent is configured to regenerate at less than 120° C. An example ligand is diamine 2,2-dimethyl-1,3-propanediamine. An example of the metal-organic framework is Mg 2 (dobpdc), where dobpdc 4− is 4,4′-dioxidobiphenyl-3,3′-dicarboxylate. Example applications for the adsorption material are removal of carbon dioxide from flue gas and biogasses.

Long, Jeffrey R.↗
DOE OSTI2025

Enhancing Dihydrogen Interaction of a Zirconium Metal–Organic Framework by Metal Doping

Advancing efficient hydrogen storage technologies is essential for enabling a sustainable energy future, especially in onboard applications. While hydrogen offers high gravimetric energy density and zero-emission combustion, its low volumetric energy density presents significant storage challenges. Metal-organic frameworks (MOFs), well known for their tunable porosity and high surface areas, have emerged as promising candidates for adsorption-based hydrogen storage. This study investigated a chemically robust zirconium-based MOF, MOF-808, as a representative platform for hydrogen storage enhancement through metal ion doping. Various divalent metal ions were introduced into MOF-808 via one-pot synthesis or post-synthetic modification (PSM) to evaluate their effects on metal doping efficiency, framework stability, and hydrogen adsorption performance. Our findings demonstrate that metal doping enhanced the hydrogen binding affinity of MOF-808 while preserving its structural integrity and excellent stability. A Mg-doped MOF, MOF-808@Mg 2:1, showed a 59% increase in hydrogen uptake, and a Cu-doped MOF, MOF-808-ZrCu, exhibited a 33% increase in isosteric heat of adsorption for H 2 compared to the pristine MOF-808 activated at the same temperature. This work highlights the potential of metal-functionalized stable MOFs for practical hydrogen storage applications. Furthermore, these materials are also being studied for their potential to enhance CO 2 adsorption.

Adsorption↗
DOE OSTI2026

Disordered hydrogen adsorption at the three-fold site of W(110)

Hydrogen often forms disordered phases on metals; however, deciphering the atomic-scale behavior requires experimental and modeling techniques that directly probe the short-range order between neighboring hydrogen adsorbates. Here, to address this challenge, we applied direct recoil spectroscopy (DRS) to investigate hydrogen adsorption on the W(110) surface. We show that the recoiled hydrogen flux measured during DRS is sensitive to the short range order of the adsorbed hydrogen. Ordered hydrogen neighbors are much more efficient at dechanneling incident ions along low-index surface channels, strongly suppressing the recoiled hydrogen flux along these directions. By modeling the DRS measurements with molecular dynamics for ordered and disordered hydrogen phases, we find that at a hydrogen surface coverage of approximately Θ = 0.6, the hydrogen adsorbates are bound to three-fold sites in a disordered phase at room temperature. This finding is consistent with transfer-matrix scaling model calculations that suggest the transition to an ordered hydrogen phase occurs at a greater surface coverage of Θ = 0.83.

08 HYDROGEN↗
DOE OSTI2022

First-Principles Surface Characterization and Water Adsorption of Fe 3 P Schreibersite

We report the meteoritic mineral schreibersite, e.g., Fe 3 P, is a proposed abiotic source of phosphorus for phosphate ion (PO 4 – ) production, needed for nucleobases, phospholipids, and other life building materials. Schreibersite could have acted as both a source of elemental phosphorus and as a catalyst, and the hostile conditions on early Earth could have accelerated its degradation in different environments. Here, we present results from quantum calculations of bulk schreibersite and of its low Miller index surfaces. We also investigate water surface adsorption and identify possible dissociation pathways on the most stable facet. Our calculations provide useful chemical insights into schreibersite interactions in aqueous environments, paving the way for further detailed investigation on more reactive surfaces. Our results help provide a “bottom-up” understanding for phosphorylated organic synthesis on the primitive planet and its role in producing life building molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen Adsorption, Subsurface Oxygen Layer Formation and Reaction with Hydrogen on Surfaces of a Pt–Rh Alloy Nanocrystal

The oxygen adsorption and its catalytic reaction with hydrogen on Pt–Rh single crystals were studied at the nanoscale by Field Emission Microscopy (FEM) and Field Ion Microscopy (FIM) techniques at 700 K. Both FEM and FIM use samples prepared as sharp tips, apexes of which mimic a single nanoparticle of catalyst considering their similar size and morphology. Oxygen adsorption on Pt-17.4 at.%Rh samples leads to the formation of subsurface oxygen, which is manifested in the field emission (FE) patterns: for O2 exposure of ~3 Langmuir (L), {113} planes appear bright in the emission pattern, while for higher oxygen doses, i.e. 84 L, the bright regions correspond to the high index planes between the {012} and {011} planes. Formation of subsurface oxygen is probably accompanied by a surface reconstruction of the nanocrystal. The subsurface oxygen can be effectively reacted off by subsequent exposure of the sample to hydrogen gas at 700 K. The hydrogenation reaction was observed as a sudden, eruptive change of the brightness seen on the FE pattern. This reaction resulted in the recovery of the initial field emission pattern characteristic of a clean tip, with {012} facets being the most visible. It was shown that the oxygen accumulation-reduction process is completely reversible. The obtained results indicate that the presence of subsurface species must be considered in the description of reactive processes on Pt–Rh catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Metal ion dopant-induced famatinite to chalcostibite phase transformation of copper antimony sulphide colloidal nanostructures: effect on photophysical and pseudocapacitance properties

Here, the strategic doping of transition metal ions into copper antimony sulphide (CAS) semiconducting nanostructures can significantly influence their photophysical and pseudocapacitive properties, for which there are few reports and therefore is the focus of this study. Accordingly, highly crystalline metal ion (Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ and Zn 2+ ) doped off-stoichiometric copper rich/poor, antimony-rich/poor, and sulphur-poor CAS nanostructures (10–23 nm) were grown via colloidal (hot-injection) synthesis using metal diethyldithiocarbamate precursors. Importantly, metal ion doping significantly influences the structure and composition of the off-stoichiometric CAS nanostructures. Data from powder X-ray diffraction, Raman spectroscopy, high-resolution scanning/transmission electron microscopy, and energy dispersive X-ray spectroscopy confirm that the heavier metal ion dopants induce a novel phase transformation from famatinite (fCAS) to chalcostibite (cCAS) nanostructures. The influence of the metal ion dopants is also observed in the optical properties of as-synthesized nanostructures. This involves blue-shifted ultraviolet-visible absorption, reduced Urbach tailing, and tunable bandgaps between 2.17 and 2.38 eV. Also, the doped nanostructures display broad visible-near infrared photoluminescence via a triple radiative pathway with relatively short decay lifetimes between 0.2 and 6.1 ns. This is mediated by electronic transitions involving intrinsic (copper/antimony/sulphur interstitial) and extrinsic (metal ion interstitial) defect states. Additionally, electrodes prepared from Mn 2+ -doped fCAS nanostructures show enhanced pseudocapacitance via Na+ surface adsorption and intercalation relative to undoped fCAS electrodes, while Zn 2+ -doped cCAS electrodes exhibit pseudocapacitance via a combination of Na+ surface adsorption, intercalation, and redox reactions. These electrodes exhibit reduced charge transfer resistance, improved electronic conductivity and notably enhanced specific capacitance (∼222 F g −1 ), and charge transport, as measured in 1 M Na 2 SO 4 electrolyte via cyclic voltammetry and electrochemical impedance spectroscopy. To this end, the discovery of the metal ion-induced phase transformation presents a new avenue for optimizing the functional properties of fCAS and cCAS nanostructures, highlighting the critical role of metal ion-related defects in controlling the optical and electrochemical properties, towards potential solar absorption and energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Accelerating Embedding Potential Optimization by Reconstructing the Pseudo-Valence Electron Density

Density functional embedding theory (DFET) enables use of electronic structure methods with higher accuracy than density functional theory in a local region, with applications thus far ranging from (photo/electro)catalysis to reactions in solution. DFET partitions a large collection of atoms into smaller groups that interact via a shared embedding (interaction) potential V emb , determined via functional optimization. The optimized effective potential (OEP) process used to optimize V emb is time-consuming and becomes a computational bottleneck due to sharp, oscillating features of V emb near nuclei. Here, similar to pseudopotential theory, by reconstructing electron densities used in the OEP process from smoother pseudo-valence-only (PVO) electron densities as proxies for total densities of the full system and subsystems, we can retain accuracy in the embedded electronic structure calculations while potentially reducing the overhead of V emb construction, within the projector augmented-wave (PAW) formalism. We explore three different chemical reactions as exemplars to test PVO–DFET, namely, H 2 dissociative adsorption on a Cu(111) surface, H 2 O adsorption on a Pt(111) surface, and aqueous [Ca 2+ –SO 4 2– ] ion-pair formation. The PVO approximation works well for all three systems with minimal loss of accuracy (∼10–70 meV error relative to the original exact-derivative (ED) approach) while accelerating V emb generation for the Cu and Pt systems respectively by 20× and 5×. Given proper numerical convergence parameters, the spatial distributions of differences between PVO- and ED-based V emb outside the core regions are small, explaining the exceptional agreement between the two approaches. Finally, we anticipate that this more efficient PVO–DFET approximation will be useful whenever computation of V emb is much more expensive than subsequent embedded high-level electron correlation calculations.

approximation↗