Search NASA⌕ Search

SEARCH · Search NASA

Results for “isothermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Fatigue behavior and life prediction of a SiC/Ti-24Al-11Nb composite under isothermal conditions

Metal Matrix Composites (MMC) and Intermetallic Matrix Composites (IMC) were identified as potential material candidates for advanced aerospace applications. They are especially attractive for high temperature applications which require a low density material that maintains its structural integrity at elevated temperatures. High temperature fatigue resistance plays an important role in determining the structural integrity of the material. This study attempts to examine the relevance of test techniques, failure criterion, and life prediction as they pertain to an IMC material, specifically, unidirectional SiC fiber reinforced titanium aluminide. A series of strain and load controlled fatigue tests were conducted on unidirectional SiC/Ti-24Al-11Nb composite at 425 and 815 C. Several damage mechanism regimes were identified by using a strain-based representation of the data, Talreja's fatigue life diagram concept. Results of these tests were then used to address issues of test control modes, definition of failure, and testing techniques. Finally, a strain-based life prediction method was proposed for an IMC under tensile cyclic loadings at elevated temperatures.

Bartolotta, Paul A.↗
NASA NTRS1990

Isothermal gas-liquid flow at reduced gravity

Research on adiabatic gas-liquid flows under reduced gravity condition is presented together with experimental data obtained using a NASA-Lewis RC 100-ft drop tower and in a LeRC Learjet. It is found that flow patterns and characteristics remain unchanged after the first 1.5 s into microgravity conditions and that the calculated time for a continuity wave to traverse the test section is less than 1.2 s. It is also found that the dispersed bubbles move at the same velocity as that of the front of the slug and that the transition between bubbly and slug flow is insensitive to diameter. Both the bubbly and the slug flows are suggested to represent a continuum of the same physical process. The characteristics of annular, slug, and bubbly flows are compared.

Dukler, A. E.↗
NASA NTRS1991

The equilibria and evolutions of magnetized, rotating, isothermal clouds. V - The effect of the toroidal field

The structures of magnetized clouds are studied from a standpoint of magnetohydrostatic equilibrium between the self-gravity and magnetic and thermal pressure forces. Toroidal as well as poloidal magnetic field is taken into account. Poloidal current flowing along the poloidal magnetic field forms a toroidal field which causes the cloud to be pinched toward the symmetric axis. In contrast to the poloidal field, which plays a role in supporting the cloud, the toroidal field has the effect of shrinking the cloud. A cloud that is pinched by the toroidal field but has a low central density often shows a prolate spheroidal shape. With increasing central density the cloud becomes a concaved oblate spheroid. The maximum mass of the cloud supported by magnetic field and thermal pressure decreases with increasing toroidal field strength. Assuming that a cloud encounters a torsional Alfven wave, and the magnetic field begins to be wound up, the cloud begins dynamical collapse if the cloud mass exceeds the marginally supported maximum mass. This indicates a new mode triggering star formation: toroidal field-induced collapse.

Tomisaka, Kohji↗
NASA NTRS1991

Isothermal, Compton-heated coronae above accretion disks

The structure of Compton-heated coronae above accretion disks is studied here by using analytic and numerical approaches are used here to determine the direct and scattered radiation reaching the base of the corona for a range of central source luminosities. It is found that the outer region of the corona is unaffected by multiple scattering in the interior, provided that the luminosity of the central source is sufficient below the Eddington limit. How attenuation and scattering by the corona affects the strength of chromospheric emission lines is determined, as is the condition for which the irradiation due to the central source exceeds the locally generated flux from the disk. Finally, it is shown that the stability analysis for irradiated accretion disks of Tuchman et al. is not substantially altered by the corona.

Ostriker, Eve C.↗
NASA NTRS1992

Isothermal aging effects on PMR-15 resin

Specimens of PMR-15 polyimide neat resin were aged in air at temperatures of 288, 316, and 343 C. Weight losses and dimensional changes were monitored during the course of the exposure time. Physical changes were also observed by optical and electron microscopy. It was found that polyimide polymer degradation occurred within a thin surface layer that developed and grew during thermal aging. The cores of the polymer specimens were protected from oxidative degradation, and they were relatively unchanged by the thermal treatment. Surface cracking was observed at 343 C and was probably due to an interaction between voids and stresses that developed in the surface layer.

Bowles, Kenneth J.↗
NASA NTRS1992

Surface tension and buoyancy-driven flow in a non-isothermal liquid bridge

The Navier-Stokes-Boussinesq equations governing the transport of momentum, mass and heat in a nonisothermal liquid bridge with a temperature-dependent surface tension are solved using a vorticity-stream-function formulation together with a nonorthogonal coordinate transformation. The equations are discretized using a pseudo-unsteady semi-implicit finite difference scheme and are solved by the ADI method. A Picard-type iteration is adopted which consists of inner and outer iterative processes. The outer iteration is used to update the shape of the free surface. Two schemes have been used for the outer iteration; both use the force balance normal to the free surface as the distinguished boundary condition. The first scheme involves successive approximation by the direct solution of the distinguished boundary condition. The second scheme uses the artificial force imbalance between the fluid pressure, viscous and capillary forces at the free surface which arises when the boundary condition for force balance normal to the surface is not satisfied. This artificial imbalance is then used to change the surface shape until the distinguished boundary condition is satisfied. These schemes have been used to examine a variety of model liquid bridge situations including purely thermocapillary-driven flow situations and mixed thermocapillary- and bouyancy-driven flow.

Zhang, Yiqiang↗
NASA NTRS1992

Isothermal fatigue behaviour of a (90 deg)8 SiC/Ti-15-3 composite at 426 C

The transverse fatigue behavior of a unidirectional SiC/Ti-15-3 composite is characterized at 426 C. The fatigue behavior of this composite along the (0 deg)8 fiber direction and that of unreinforced Ti-15-3 alloy is compared. It is found that the (90 deg)8 composite fatigue life is much shorter than that of the (0 deg)8 composite. The (90 deg)8 fatigue life is much lower than that of the unreinforced Ti-15-3 alloy. Results from 1D model and fractographic evidence for the (90 deg)8 fatigue behavior indicate that the short life of the composite in this orientation is caused by weak fiber-matrix bond strength.

Gayda, J.↗
NASA NTRS1992

Transverse flexural tests as a tool for assessing damage to PMR-15 composites from isothermal aging in air at elevated temperatures

To date, the effect of thermo-oxidative aging on unidirectional composite mechanical properties has been monitored by the measurement of interlaminar shear strength (ILSS) and either three or four point longitudinal flexural strength (LFS) of the composites being tested. Both results are affected by the fiber-to-matrix bonding, the former being dependent on the shear resistance of the interface and the latter on the degree of load sharing by the fibers through the fiber/matrix interface. Recently, fiber/matrix interfacial bond strengths have been monitored using a transverse flexural strength (TFS) test method. This test method was used to evaluate the effect of fiber surface treatment on the fiber/matrix bond. The interface bonding was varied in these tests using Hercules A-fibers with three-types of surfaces that produce bonds of poor, better, and good quality. The TFS was found not only to be sensitive to the bonding, but also to the aging time of unidirectional A-fiber/PMR-15 composites. This relationship reflects the mechanism by which the PMR-15 degrades during thermal aging.

Bowles, Kenneth J.↗
NASA NTRS1992

Mechanisms of isothermal phase transformations in rapidly solidified Ti-24Al-11Nb

A dynamic simulation for the motion of an isolated superdislocation (SD) under an applied stress is presented. The simulation incorporates the concept that cross slip from (111) planes to (010) planes can locally pin the SD. It is determined that the principal effect of cross-slip-pinning is not the reduction in the SD velocity, but rather the exhaustion of the density of mobile SDs.

Hsiung, L. M.↗
NASA NTRS1992

Particle diagnostics and turbulence measurements in a confined isothermal liquid spray

An experimental study of the behavior and structure of a liquid spray immersed in a strong swirling field is reported. In order to simulate some of the aerodynamic conditions experienced by a spray in a model combustor, an experimental setup using an acrylic chamber, a vane-type swirler, and separate air supplies for both the secondary air and swirl air were integrated to perform the experiments in the wind tunnel. The effect of the swirling flow on the original spray cone is to widen it substantially, and to provide a vortex core where intense mixing results in large changes in particle size distribution and in particle number density. Outside the recirculation region, both the D32 and N sub d attain more uniform values. Inside the recirculation region, the mean axial velocity averaged over all the drop sizes has larger values than the mean air velocity. Outside the recirculation region, both the particles and the air exhibit virtually the same velocities. The turbulence measurements showed regions of high turbulence intensity in the boundaries of the recirculation region.

Brena De La Rosa, A.↗
NASA NTRS1993

Isothermal aging effects on PMR-15 resin

Specimens of PMR-15 polyimide neat resin were aged in air at temperatures of 288, 316, and 343 C. Weight losses and dimensional changes were monitored during the course of the exposure time. Physical changes were also observed by optical and electron microscopy. It was found that polyimide polymer degradation occurred within a thin surface layer that developed and grew during thermal aging. The cores of the polymer specimens were protected from oxidative degradation, and they were relatively unchanged by the thermal treatment. Surface cracking was observed at 343 C and was probably due to an interaction between voids and stresses that developed in the surface layer.

Bowles, Kenneth J.↗
NASA NTRS1993

Transverse flexural tests as a tool for assessing damage to PMR-15 composites from isothermal aging in air at elevated temperatures

To date, the effect of thermo-oxidative aging on unidirectional composite mechanical properties has been monitored by the measurement of interlaminar shear strength (ILSS) and either three or four point longitudinal flexural strength (LFS) of the composites being tested. Both results are affected by the fiber-to-matrix bonding, the former being dependent on the shear resistance of the interface and the latter on the degree of load sharing by the fibers through the fiber/matrix interface. Recently, fiber/matrix interfacial bond strengths have been monitored using a transverse flexural strength (TFS) test method. This test method was used to evaluate the effect of fiber surface treatment on the fiber/matrix.

Bowles, Kenneth J.↗
NASA NTRS1991

Flow field velocity measurements for non-isothermal systems

Experimental techniques which can be potentially utilized to measure the gas velocity fields in nonisothermal CVD systems both in ground-based and space-based investigations are considered. The advantages and disadvantages of a three-component laser velocimetry (LV) system that was adapted specifically for quantitative determination of the mixed convective flows in a chamber for crystal growth and film formation by CVD are discussed. Data from a horizontal research CVD reactor indicate that current models for the effects of thermophoretic force are not adequate to predict the thermophoretic bias in arbitrary flow configurations. It is concluded that LV techniques are capable of characterizing the fluid dynamics of a CVD reactor at typical growth temperatures. Thermal effects are shown to dominate and stabilize the fluid dynamics of the reactor. Heating of the susceptor increases the gas velocities parallel to the face of a slanted susceptor by up to a factor of five.

Johnson, E. J.↗
NASA NTRS1993

Solution of mixed convection heat transfer from isothermal in-line fins

Transient and steady state combined natural and forced convective flows over two in-line finite thickness fins (louvers) in a vertical channel are numerically solved using two methods. The first method of solution is based on the 'Simple Arbitrary Lagrangian Eulerian' (SALE) technique which incorporates mainly two computational phases: (1) a Lagrangian phase in which the velocity field is updated by the effects of all forces, and (2) an Eulerian phase that executes all advective fluxes of mass, momentum and energy. The second method of solution uses the finite element code entitled FIDAP. In the first part, comparison of the results by FIDAP, SALE, and available experimental work were done and discussed for steady state forced convection over louvered fins. Good agreements were deduced between the three sets of results especially for the flow over a single fin. In the second part and in the absence of experimental literature, the numerical predictions were extended to the transient transports and to the opposing flow where pressure drop is reversed. Results are presented and discussed for heat transfer and pressure drop in assisting and opposing mixed convection flows.

Khalilollahi, Amir↗