Search NASA⌕ Search

SEARCH · Search NASA

Results for “land models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Coupling Noah-Multiparameterization land-surface Model with Energy Research and Forecasting Model

The Energy Research and Forecasting (ERF) model is a high-performance atmospheric model built on the AMReX adaptive mesh refinement (AMR) framework, enabling efficient simulations on heterogeneous computing platforms that combine multicore processors with hardware accelerators. To support land–atmosphere interactions within ERF’s AMR-based environment, a land-surface model must be capable of operating directly on hierarchically refined meshes. In this work, we present a methodology for coupling the Fortran-based Noah-Multiparameterization (Noah-MP) land-surface model with ERF’s C++ codebase. Rather than rewriting Noah-MP, we construct a Fortran–C interoperability layer using CodeScribe, a tool that leverages large language models (LLMs) to automate the generation of interface code. CodeScribe applies structured prompting techniques to generate bindings that support efficient data exchange and function calls between ERF and Noah-MP. The coupling framework also incorporates AMR-aware data handling strategies, allowing NoahMP to operate seamlessly within ERF’s hierarchical mesh structure. This work provides a structured approach for integrating legacy Fortran models into modern C++-based modeling systems using LLM-assisted code generation.

54 ENVIRONMENTAL SCIENCES↗

A Catchment-Based Land Surface Model for GCMs and the Framework for its Evaluation

A new GCM-scale land surface modeling strategy that explicitly accounts for subgrid soil moisture variability and its effects on evaporation and runoff is now being explored. In a break from traditional modeling strategies, the continental surface is disaggregated into a mosaic of hydrological catchments, with boundaries that are not dictated by a regular grid but by topography. Within each catchment, the variability of soil moisture is deduced from TOP-MODEL equations with a special treatment of the unsaturated zone. This paper gives an overview of this new approach and presents the general framework for its off-line evaluation over North-America.

Ducharen, A.↗

Assimilation of GRACE Terrestrial Water Storage Observations into a Land Surface Model for the Assessment of Regional Flood Potential

We evaluate performance of the Catchment Land Surface Model (CLSM) under flood conditions after the assimilation of observations of the terrestrial water storage anomaly (TWSA) from NASA's Gravity Recovery and Climate Experiment (GRACE). Assimilation offers three key benefits for the viability of GRACE observations to operational applications: (1) near-real time analysis; (2) a downscaling of GRACE's coarse spatial resolution; and (3) state disaggregation of the vertically-integrated TWSA. We select the 2011 flood event in the Missouri river basin as a case study, and find that assimilation generally made the model wetter in the months preceding flood. We compare model outputs with observations from 14 USGS groundwater wells to assess improvements after assimilation. Finally, we examine disaggregated water storage information to improve the mechanistic understanding of event generation. Validation establishes that assimilation improved the model skill substantially, increasing regional groundwater anomaly correlation from 0.58 to 0.86. For the 2011 flood event in the Missouri river basin, results show that groundwater and snow water equivalent were contributors to pre-event flood potential, providing spatially-distributed early warning information.

flood↗

Contrasting Parametric Sensitivities in Two Global Vegetation Models Using Parameter Perturbation Ensembles

Uncertainty in land model projections remains high and the roles of parametric and structural uncertainty are difficult to disentangle. To compare parametric sensitivity across model structures we present two parameter perturbation ensembles using the Community Land Model (CLM) operating in satellite phenology mode. The ensembles contrast two vegetation modules: (a) the default CLM vegetation module and (b) the Functionally Assembled Terrestrial Ecosystem Simulator (CLM-FATES). We perturbed over 300 parameters and quantified their effects on biophysical fluxes globally and across biomes. Most parameters have minimal impact on biophysical fluxes, with only a few substantially influencing results. While both models exhibit similar parameter sensitivity for some fluxes, CLM-FATES shows larger spread in gross primary productivity (GPP), driven by strong sensitivity to carboxylation rate. CLM-FATES also shows a weaker GPP response to soil hydrology parameters and exhibits higher water use efficiency (WUE). Cross-model comparisons reveal similar sensitivities for some parameters (e.g., leaf dimension) but divergent responses to others (e.g., stomatal intercept), highlighting underlying structural differences. Differences in WUE and sensitivity to hydrology and stomatal conductance parameters underscore how model structure fundamentally alters parametric sensitivity. The data sets generated from these ensembles can be used to identify influential parameters and guide future calibration efforts.

Foster, A. C. [NSF National Center for Atmospheric↗

On the Use and Validation of Mosaic Heterogeneity in Atmospheric Numerical Models

The mosaic land modeling approach allows for the representation of multiple surface types in a single atmospheric general circulation model grid box. Each surface type, collectively called 'tiles' correspond to different sets of surface characteristics (e.g. for grass, crop or forest). Typically, the tile space data is averaged to grid space by weighting the tiles with their fractional cover. While grid space data is routinely evaluated, little attention has been given to the tile space data. The present paper explores uses of the tile space surface data in validation with station observations. The results indicate the limitations that the mosaic heterogeneity parameterization has in reproducing variations observed between stations at the Atmospheric Radiation Measurement Southern Great Plains field site.

Bosilovich, Michael G.↗

Soil moisture and hydrology projections of the permafrost region – a model intercomparison

Abstract. This study investigates and compares soil moisture and hydrology projections of broadly used land models with permafrost processes and highlights the causes and impacts of permafrost zone soil moisture projections. Climate models project warmer temperatures and increases in precipitation (P) which will intensify evapotranspiration (ET) and runoff in land models. However, this study shows that most models project a long-term drying of the surface soil (0–20 cm) for the permafrost region despite increases in the net air–surface water flux (P-ET). Drying is generally explained by infiltration of moisture to deeper soil layers as the active layer deepens or permafrost thaws completely. Although most models agree on drying, the projections vary strongly in magnitude and spatial pattern. Land models tend to agree with decadal runoff trends but underestimate runoff volume when compared to gauge data across the major Arctic river basins, potentially indicating model structural limitations. Coordinated efforts to address the ongoing challenges presented in this study will help reduce uncertainty in our capability to predict the future Arctic hydrological state and associated land–atmosphere biogeochemical processes across spatial and temporal scales.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of Precipitation in Coupled Land-Atmosphere Models

The project objective was to understand mechanisms by which atmosphere-land-ocean processes impact precipitation in the mean climate and interannual variations, focusing on tropical and subtropical regions. A combination of modeling tools was used: an intermediate complexity land-atmosphere model developed at UCLA known as the QTCM and the NASA Seasonal-to-Interannual Prediction Program general circulation model (NSIPP GCM). The intermediate complexity model was used to develop hypotheses regarding the physical mechanisms and theory for the interplay of large-scale dynamics, convective heating, cloud radiative effects and land surface feedbacks. The theoretical developments were to be confronted with diagnostics from the more complex GCM to validate or modify the theory.

Neelin, David↗

Janus: A Python Package for Agent-Based Modeling of Land Use and Land Cover Change

Janus is an open source Python package for agent-based modeling (ABM) of land use and land cover change (LULCC). Many ABMs of LULCC have been created across platforms, some of which are not ideal for large scale, high resolution scenarios. This model provides a simple object-oriented framework for creating ABMs specific to LULCC. The organizational philosophy of the modeling framework is to create software objects (agents) that are associated with specific and contextual attributes which are isolated from where those agents exist in the spatial setting of the model, yet provide clear linkages between the agent, their environment, and other agents in the simulation. In this way, the framework allows for assembly of LULCC ABMs with low (programmatic) overhead, making the models extensible and providing clear mechanisms for integrating them with process-oriented biophysical models. Provided with Janus is a suite of geospatial data preprocessing tools that can use arbitrary land cover products as an input. Crop choice decisions are based on potential crop prices, these can be created synthetically, or drawn from integrated human-Earth systems models such as the GCAM. Janus is publicly accessible through GitHub and provides an example dataset for testing.

54 ENVIRONMENTAL SCIENCES↗

Simulation of the Indian Summer Monsoon Using Comprehensive Atmosphere-land Interactions, in the Absence of Two-way Air-sea Interactions

Community Land Model version 2 (CLM2) as a comprehensive land surface model and a simple land surface model (SLM) were coupled to an atmospheric climate model to investigate the role of land surface processes in the development and the persistence of the South Asian summer monsoon. Two-way air-sea interactions were not considered in order to identify the reproducibility of the monsoon evolution by the comprehensive land model, which includes more realistic vertical soil moisture structures, vegetation and 2-way atmosphere-land interactions at hourly intervals. In the monsoon development phase (May and June). comprehensive land-surface treatment improves the representation of atmospheric circulations and the resulting convergence/divergence through the improvements in differential heating patterns and surface energy fluxes. Coupling with CLM2 also improves the timing and spatial distribution of rainfall maxima, reducing the seasonal rainfall overestimation by approx.60 % (1.8 mm/d for SLM, 0.7 mm/dI for CLM2). As for the interannual variation of the simulated rainfall, correlation coefficients of the Indian seasonal rainfall with observation increased from 0.21 (SLM) to 0.45 (CLM2). However, in the mature monsoon phase (July to September), coupling with the CLM2 does not exhibit a clear improvement. In contrast to the development phase, latent heat flux is underestimated and sensible heat flux and surface temperature over India are markedly overestimated. In addition, the moisture fluxes do not correlate well with lower-level atmospheric convergence, yielding correlation coefficients and root mean square errors worse than those produced by coupling with the SLM. A more realistic representation of the surface temperature and energy fluxes is needed to achieve an improved simulation for the mature monsoon period.

Monsoon Precipitation↗

Acoustic Measurements of a Large Civil Transport Main Landing Gear Model

Microphone phased array acoustic measurements of a 26 percent-scale, Boeing 777-200 main landing gear model with and without noise reduction fairings installed were obtained in the anechoic configuration of the Virginia Tech Stability Tunnel. Data were acquired at Mach numbers of 0.12, 0.15, and 0.17 with the latter speed used as the nominal test condition. The fully and partially dressed gear with the truck angle set at 13 degrees toe-up landing configuration were the two most extensively tested configurations, serving as the baselines for comparison purposes. Acoustic measurements were also acquired for the same two baseline configurations with the truck angle set at 0 degrees. In addition, a previously tested noise reducing, toboggan-shaped fairing was re-evaluated extensively to address some of the lingering questions regarding the extent of acoustic benefit achievable with this device. The integrated spectra generated from the acoustic source maps reconfirm, in general terms, the previously reported noise reduction performance of the toboggan fairing as installed on an isolated gear. With the recent improvements to the Virginia Tech tunnel acoustic quality and microphone array capabilities, the present measurements provide an additional, higher quality database to the acoustic information available for this gear model.

Ravetta, Patricio A.↗

Attribution of Flux Partitioning Variations Between Land Surface Models over the Continental U.S.

Accurate quantification of the terrestrial evapotranspiration (ET) components of plant transpiration (T), soil evaporation (E) and evaporation of the intercepted water (I) is necessary for improving our understanding of the links between the carbon and water cycles. Recent studies have noted that, among the modeled estimates, large disagreements exist in the relative contributions of T, E and I to the total ET. As these models are often used in data assimilation environments for incorporating and extending ET relevant remote sensing measurements, understanding the sources of inter-model differences in ET components is also necessary for improving the utilization of such remote sensing measurements. This study quantifies the contributions of two key factors explaining inter-model disagreements to the uncertainty in total ET: (1) contribution of the local partitioning and (2) regional distribution of ET. The analysis is conducted by using outputs from a suite of land surface models in the North American Land Data Assimilation System (NLDAS) configuration. For most of these models, transpiration is the dominant component of the ET partition. The results indicate that the uncertainty in local partitioning dominates the inter-model spread in modeled soil evaporation E. The inter-model differences in T are dominated by the uncertainty in the distribution of ET over the Eastern U.S. and the local partitioning uncertainty in the Western U.S. The results also indicate that uncertainty in the T estimates is the primary driver of total ET errors. Over the majority of the U.S., the contribution of the two factors of uncertainty to the overall uncertainty is non-trivial.

uncertainty↗

Attribution of Flux Partitioning Variations Between Land Surface Models Over the Continental U.S.

Accurate quantification of the terrestrial evapotranspiration (ET) components of plant transpiration (T), soil evaporation (E) and evaporation of the intercepted water (I) is necessary for improving our understanding of the links between the carbon and water cycles. Recent studies have noted that, among the modeled estimates, large disagreements exist in the relative contributions of T, E and I to the total ET. As these models are often used in data assimilation environments for incorporating and extending ET relevant remote sensing measurements, understanding the sources of inter-model differences in ET components is also necessary for improving the utilization of such remote sensing measurements. This study quantifies the contributions of two key factors explaining inter-model disagreements to the uncertainty in total ET: (1) contribution of the local partitioning and (2) regional distribution of ET. The analysis is conducted by using outputs from a suite of land surface models in the North American Land Data Assimilation System (NLDAS) configuration. For most of these models, transpiration is the dominant component of the ET partition. The results indicate that the uncertainty in local partitioning dominates the inter-model spread in modeled soil evaporation E. The inter-model differences in T are dominated by the uncertainty in the distribution of ET over the Eastern U.S. and the local partitioning uncertainty in the Western U.S. The results also indicate that uncertainty in the T estimates is the primary driver of total ET errors. Over the majority of the U.S., the contribution of the two factors of uncertainty to the overall uncertainty is non-trivial.

evapotranspiration partitioning; transpiration; so↗

Land Surface Modeling and Data Assimilation to Support Physical Precipitation Retrievals for GPM

Objective: The objective of this proposal is to provide a routine land surface modeling and data assimilation capability for GPM in order to provide global land surface states that are necessary to support physical precipitation retrieval algorithms over land. It is well-known that surface emission, particularly over the range of frequencies to be included in GPM, is sensitive to land surface states, including soil properties, vegetation type and greenness, soil moisture, surface temperature, and snow cover, density, and grain size. Therefore, providing a robust capability to routinely provide these critical land states is essential to support GPM-era physical retrieval algorithms over land.

Peters-Lidard, Christa D.↗

Aerodynamics of a Gulfstream G550 Nose Landing Gear Model

In this paper we discuss detailed steady and unsteady aerodynamic measurements of a Gulfstream G550 nose landing gear model. The quarter-scale, high-fidelity model includes part of the lower fuselage and the gear cavity. The full model configuration allowed for removal of various gear components (e.g. light cluster, steering mechanism, hydraulic lines, etc.) in order to document their effects on the local flow field. The measurements were conducted at a Reynolds number of 7.3 x 10(exp 4) based on the shock strut (piston) diameter and a freestream Mach number of 0.166. Additional data were also collected at lower Mach numbers of 0.12 and 0.145 and correspondingly lower Reynolds numbers. The boundary layer on the piston was tripped to enable turbulent flow separation, so as to better mimic the conditions encountered during flight. Steady surface pressures were gathered from an extensive number of static ports on the wheels, door, fuselage, and within the gear cavity. To better understand the resultant flow interactions between gear components, surface pressure fluctuations were collected via sixteen dynamic pressure sensors strategically placed on various subcomponents of the gear. Fifteen of the transducers were flush mounted on the gear surface at fixed locations, while the remaining one was a mobile transducer that could be placed at numerous varying locations. The measured surface pressure spectra are mainly broadband in nature, lacking any local peaks associated with coherent vortex shedding. This finding is in agreement with off-surface flow measurements using PIV that revealed the flow field to be a collection of separated shear layers without any dominant vortex shedding processes.

Neuhart, Dan H.↗

Impact of Soil Moisture Assimilation on Land Surface Model Spin-Up and Coupled LandAtmosphere Prediction

Advances in satellite monitoring of the terrestrial water cycle have led to a concerted effort to assimilate soil moisture observations from various platforms into offline land surface models (LSMs). One principal but still open question is that of the ability of land data assimilation (LDA) to improve LSM initial conditions for coupled short-term weather prediction. In this study, the impact of assimilating Advanced Microwave Scanning Radiometer for EOS (AMSR-E) soil moisture retrievals on coupled WRF Model forecasts is examined during the summers of dry (2006) and wet (2007) surface conditions in the southern Great Plains. LDA is carried out using NASAs Land Information System (LIS) and the Noah LSM through an ensemble Kalman filter (EnKF) approach. The impacts of LDA on the 1) soil moisture and soil temperature initial conditions for WRF, 2) land-atmosphere coupling characteristics, and 3) ambient weather of the coupled LIS-WRF simulations are then assessed. Results show that impacts of soil moisture LDA during the spin-up can significantly modify LSM states and fluxes, depending on regime and season. Results also indicate that the use of seasonal cumulative distribution functions (CDFs) is more advantageous compared to the traditional annual CDF bias correction strategies. LDA performs consistently regardless of atmospheric forcing applied, with greater improvements seen when using coarser, global forcing products. Downstream impacts on coupled simulations vary according to the strength of the LDA impact at the initialization, where significant modifications to the soil moisture flux- PBL-ambient weather process chain are observed. Overall, this study demonstrates potential for future, higher-resolution soil moisture assimilation applications in weather and climate research.

soil moisture↗

Modeling Land-Atmosphere Coupling at Cloud-Resolving Scale Within the Multiple Atmosphere Multiple Land (MAML) Framework in SP-E3SM

Representing subgrid variabilities of land surface processes and their upscaled effects is crucial for global climate modeling. Here, we implement a Multiple Atmosphere Multiple Land (MAML) framework in the superparamaterized version of E3SM (SP32 E3SM) to explicitly simulate the subgrid variabilities of land states and fluxes at cloud-resolving scale and their interactions with atmosphere. Comparing to the standard SP-E3SM in which all the atmospheric columns of the cloud resolving model embedded within the global atmospheric model grid interact with the same land surface (i.e., Multiple Atmosphere Single Land (MASL)), the impact of MAML on the strength of land-atmosphere coupling is limited, partly because the current implementation mainly facilitates one-way coupling between the cloud-resolving model and the land surface model. Despite such limitation, MAML increases the surface latent heat flux at the expense of sensible heat flux, and increases precipitation in India, Amazon, and Central Africa, reducing the model dry bias compared to the standard SP-E3SM. By employing a normalized gross moist stability (NGMS) diagnostic framework, we find that the increase in precipitation minus evaporation (PE) is primarily driven by the change in large-scale moisture convergence, particularly by the increase of water vapor in the lower atmosphere, while the local effect of total surface energy flux plays a minor role in the P-E change. More specifically, MAML changes the surface energy partitioning (evaporative fraction), increases the atmosphere water vapor, and further increases P-E by decreasing the NGMS. Finally, future development in the MAML framework is discussed.

54 ENVIRONMENTAL SCIENCES↗

Interannual Variability of the Mosaic Land-Surface Model

Recently, NASA Goddard Earth Observing System (GEOS-1) reanalysis data has been used to provide forcing for the Koster and Suarez Mosaic Land-surface Model (LSM). The LSM was integrated off-line at all global land points for the period of 1983 - 1995 by the Off-line Land- surface GEOS Assimilation system (OLGA). Here, we compare the interannual variability of OLGA, GEOS-1 and surface observing stations temperature and moisture. Particular attention is given to the United States because of the extreme seasons of 1988 and 1993. Furthermore, the comparison of OLGA is extended to include the analysis of data on the'tiles' (different surface types) in the Mosaic LSM. Results indicate that the GEOS-1 near-surface temperature and moisture reasonably represents the interannual variability in more normal years. However, OLGA also simulates the extreme drought and floods years well. The analysis of the tile information shows that the "Bare soil" surface type is most sensitive to the climate extremes. Off-line testing has provided valuable information on the performance of the Mosaic LSM prior to its incorporation into the new version of the GEOS Data Assimilation System and the integration of a new long reanalysis.

Bosilovich, Michael G.↗