Search NASA⌕ Search

SEARCH · Search NASA

Results for “large structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

On the interactions between large-scale structure and fine-grained turbulence in a free shear flow. II - The development of spatial interactions in the mean

The interactions between large-scale structure and fine-grained turbulence in a spatially developing mixing layer are investigated. Both a conditioned average and a time average are employed to separate the nonrandom and random fluctuations in the kinetic energy treatment of the interactions. Shape assumptions applying to the interaction integrals are adopted to obtain a solution to the closure problem. Energy-transfer mechanisms among the mean flow, the fine-grained turbulence and the large-scale structure are discussed. The magnitude of the large-scale structure and its streamwise lifetime both prove to be important in accounting for fine-grained turbulence enhancement.

Alper, A.↗
NASA NTRS1980

Construction and assembly of large space structures

Three aspects of the construction and assembly of large space structures, namely transportation costs, human productivity in space and the source of materials (lunar vs terrestrial), are considered. Studies on human productivity have been so encouraging that the cost of human labor is now regarded as much less important than transportation costs. It is pointed out that these costs, although high, are extremely demand-sensitive. Even with high demand, however, the construction of several large systems would warrant the use of lunar materials and space manufacturing. The importance of further research is stressed in order to establish the optimum tradeoff between automation and manual assembly.

Mar, J. W.↗
NASA NTRS1983

Reduced order control design for large space structures: A communication satellite example

Large flexible communication satellite controller design is considered. The satellite that was developed for a "straw man' was configured as an offset fed paraboloid with a set of masts and booms that carry the antenna. The controllers were both a boom and mast actuator and a set of two degree of freedom actuators at the antenna to move it in order to satisfy both line of sight and defocus control.

Grant, R.↗
NASA NTRS1985

Study on utilization of advanced composites in fuselage structures of large transports

The potential for utilizing advanced composites in fuselage structures of large transports was assessed. Six fuselage design concepts were selected and evaluated in terms of structural performance, weight, and manufacturing development and costs. Two concepts were selected that merit further consideration for composite fuselage application. These concepts are: (1) a full depth honeycomb design with no stringers, and (2) an I section stringer stiffened laminate skin design. Weight reductions due to applying composites to the fuselages of commercial and military transports were calculated. The benefits of applying composites to a fleet of military transports were determined. Significant technology issues pertinent to composite fuselage structures were identified and evaluated. Program plans for resolving the technology issues were developed.

Johnson, R. W.↗
NASA NTRS1979

Gyrodampers for large space structures

The problem of controlling the vibrations of a large space structures by the use of actively augmented damping devices distributed throughout the structure is addressed. The gyrodamper which consists of a set of single gimbal control moment gyros which are actively controlled to extract the structural vibratory energy through the local rotational deformations of the structure, is described and analyzed. Various linear and nonlinear dynamic simulations of gyrodamped beams are shown, including results on self-induced vibrations due to sensor noise and rotor imbalance. The complete nonlinear dynamic equations are included. The problem of designing and sizing a system of gyrodampers for a given structure, or extrapolating results for one gyrodamped structure to another is solved in terms of scaling laws. Novel scaling laws for gyro systems are derived, based upon fundamental physical principles, and various examples are given.

Aubrun, J. N.↗
NASA NTRS1980

The control and estimation of large space structures

A shape control or estimation problem for a large space structure can be modeled by a partial differential equation which represents changes in shape with respect to space and time, together with spatially discrete forcing functions or observations which represent the placement of actuators or sensors at discrete points along the structure. The use of Green's functions to convert boundary value problems into integral equations provides a convenient treatment of this mixture of continuous and discrete mathematics. Control and estimation algorithms are developed for the one-dimensional static beam to illustrate this technique.

Weeks, C.↗
NASA NTRS1982

Adaptive identification for the dynamics of large space structures

A new approach for identifying the dynamics of large space structures using noisy measurements is presented. In this approach, a modal system description is avoided and, hence, the a priori specification of model order. Instead, the system's order is recursively determined on-line, along with its parameters, using recursive lattice filters which are widely used in adaptive signal processing. The order determination is carried out based on statistical hypothesis testing theory. The approach is illustrated for the problem of identifying the structural dynamic characteristics of a free-free beam. Results on the effectiveness and accuracy of the identification scheme with respect to noise levels, sampling rates, and data window sizes are presented

Sundararajan, N.↗
NASA NTRS1984

Ground test experiment for large space structures, appendix I

Marshall Space Flight Center has developed a Large Space Structure (LSS) ground test verification experiment facility having adequate fidelity and flexibility to accommodate the demands of LSS control theory testing. The first experiment is in the subsystem verification and integration phase. This test employs the ASTROMAST, a lightweight S glass composite deployable beam structure, as the test article and is cited to prove out centralized and distributed sensor control strategies.

Tollison, D. K.↗
NASA NTRS1985

Active control of large space structures: An introduction and overview

An overview of the large space structure (LSS) control system design problem is presented. The LSS is defined as a class of system, and LSS modeling techniques are discussed. Model truncation, control system objectives, current control law design techniques, and particular problem areas are discussed.

Doane, G. B., III↗
NASA NTRS1985

Verification of large space structures using scale modelling laws

The feasibility of testing large space structures in 1-g environment for the purpose of verifying its performance requirement is considered. Because of the difference in test objectives as compared to the conventional structural systems, the scale modelling laws are examined. The investigation is performed on a generic structural element, a space beam. A preliminary conclusion is obtained based on the results.

Chen, J.-C.↗
NASA NTRS1986

The galaxy distribution and the large-scale structure of the universe

Data related to the large-scale galaxy distribution are discussed. The galaxy counts of Shane-Wirtanen (1967) are analyzed; the effects of residual systematic errors on the galaxy distribution measurements are considered. The analysis reveals that the Shane-Wirtanen data are not applicable to the study of large-scale structure. A model which is capable of measuring galaxy correlation functions on scales greater than about 10 Mpc is evaluated.

Geller, M. J.↗
NASA NTRS1988

The large-scale structure of flare-associated interplanetary shocks

The large-scale structure of flare-associated interplanetary shocks is investigated by examining the properties of 116 shocks which originated in solar flare events during a 18.7-year period commencing mid-May 1967. The best average representation of these shocks is an expansion which is uniform over about 100 deg. The highest compression ratio across the shock is about 15 deg west of the radial from the flare site. The loose coupling of shocks and their drivers is supported by the observation that drivers are generally only detected for shocks originating near central meridian. A comparison of the numbers of shocks per year with the numbers of sudden commencement geomagnetic storms indicates that the percentage of shocks at 1 AU which originate in flare events is less than 50 percent. Many shock-flare associations made in the past are probably in error.

Cane, H. V.↗
NASA NTRS1984

Dynamics and control of large space structures

An attempt is made to gather data useful to investigators in the fields of large space structure dynamics and control modeling, design and testing. Attention is given to structural dynamics and its relationship to such allied engineering fields as flutter analysis, as well as to problems in the prediction of atmospheric density at orbital altitude. The first challenge posed by large space structure control is the design of control systems with natural frequencies above several major structural frequencies. The establishment of a sufficiently accurate structural model, plant excitation, and shape maintenance, are noted to be additional problems.

Nurre, G. S.↗
NASA NTRS1979

Low-thrust chemical orbit transfer propulsion

The need for large structures in high orbit is reported in terms of the many mission opportunities which require such structures. Mission and transportation options for large structures are presented, and it is shown that low-thrust propulsion is an enabling requirement for some missions and greatly enhancing to many others. Electric and low-thrust chemical propulsion are compared, and the need for an requirements of low-thrust chemical propulsion are discussed in terms of the interactions that are perceived to exist between the propulsion system and the large structure.

Pelouch, J. J., Jr.↗
NASA NTRS1979

Low-thrust chemical orbit transfer propulsion

The need for large structures in high orbit is discussed in terms of the many mission opportunities which require such structures. Mission and transportation options for large structures are presented, and it is shown that low-thrust propulsion is an enabling requirement for some missions and greatly enhancing to many others. A general comparison of electric and low-thrust chemical propulsion is made and the need for and requirements of low-thrust chemical propulsion are discussed in terms of the interactions that are perceived to exist between the propulsion system and the large structure.

Pelouch, J. J., Jr.↗
NASA NTRS1990

Computational methods and software systems for dynamics and control of large space structures

This final report on computational methods and software systems for dynamics and control of large space structures covers progress to date, projected developments in the final months of the grant, and conclusions. Pertinent reports and papers that have not appeared in scientific journals (or have not yet appeared in final form) are enclosed. The grant has supported research in two key areas of crucial importance to the computer-based simulation of large space structure. The first area involves multibody dynamics (MBD) of flexible space structures, with applications directed to deployment, construction, and maneuvering. The second area deals with advanced software systems, with emphasis on parallel processing. The latest research thrust in the second area, as reported here, involves massively parallel computers.

Park, K. C.↗