Search NASA⌕ Search

SEARCH · Search NASA

Results for “ligand exchange”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Phosphate binding protein as the biorecognition element in a biosensor for phosphate

This work explores the potential use of a member of the periplasmic family of binding proteins, the phosphate binding protein (PBP), as the biorecognition element in a sensing scheme for the detection of inorganic phosphate (Pi). The selectivity of this protein originates from its natural role which, in Escherichia coli, is to serve as the initial receptor for the highly specific translocation of Pi to the cytoplasm. The single polypeptide chain of PBP is folded into two similar domains connected by three short peptide linkages that serve as a hinge. The Pi binding site is located deep within the cleft between the two domains. In the presence of the ligand, the two globular domains engulf the former in a hinge-like manner. The resultant conformational change constitutes the basis of the sensor development. A mutant of PBP (MPBP), where an alanine was replaced by a cysteine residue, was prepared by site-directed mutagenesis using the polymerase chain reaction (PCR). The mutant was expressed, from plasmid pSD501, in the periplasmic space of E. coli and purified in a single chromatographic step on a perfusion anion-exchange column. Site-specific labeling was achieved by attaching the fluorophore, N-[2-(1-maleimidyl)ethyl]-7-(diethylamino)coumarin-3-carboxamide (MDCC), to the protein through the sulfhydryl group of the cysteine moiety. Steady-state fluorescence studies of the MPBP-MDCC conjugate showed a change in the intensity of the signal upon addition of Pi. Calibration curves for Pi were constructed by relating the intensity of the fluorescence signal with the amount of analyte present in the sample. The sensing system was first developed and optimized on a spectrofluorometer using ml volumes of sample. It was then adapted to be used on a microtiter plate arrangement with microliter sample volumes. The system's versatility was finally proven by developing a fiber optic fluorescence-based sensor for monitoring Pi. In all three cases the detection limits for the analyte were in the sub-microMolar range. It was also demonstrated that the sensing system was selective for phosphate over other structurally-similar anions, paving the way for the design and development of a new family of biosensors utilizing the specific binding properties of periplasmic proteins. c2003 Elsevier B.V. All rights reserved.

NASA Program Fundamental Space Biology↗
DOE OSTI2021

Electronic structure of mononuclear Cu-based molecule from density-functional theory with self-interaction correction

In this paper, we investigate the electronic structure of a planar mononuclear Cu-based molecule [Cu(C 6 H 4 S 2 ) 2 ] z in two oxidation states ( z = –2, –1) using density-functional theory (DFT) with Fermi–Löwdin orbital (FLO) self-interaction correction (SIC). The dianionic Cu-based molecule was proposed to be a promising qubit candidate. Self-interaction error within approximate DFT functionals renders severe delocalization of electron and spin densities arising from 3 d orbitals. The FLO-SIC method relies on optimization of Fermi–Löwdin orbital descriptors (FODs) with which localized occupied orbitals are constructed to create SIC potentials. Starting with many initial sets of FODs, we employ a frozen-density loop algorithm within the FLO-SIC method to study the Cu-based molecule. We find that the electronic structure of the molecule remains unchanged despite somewhat different final FOD configurations. In the dianionic state (spin S = 1/2), FLO-SIC spin density originates from the Cu d and S p orbitals with an approximate ratio of 2:1, in quantitative agreement with multireference calculations, while in the case of SIC-free DFT, the orbital ratio is reversed. Overall, FLO-SIC lowers the energies of the occupied orbitals and, in particular, the 3 d orbitals unhybridized with the ligands significantly, which substantially increases the energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) compared to SIC-free DFT results. The FLO-SIC HOMO–LUMO gap of the dianionic state is larger than that of the monoanionic state, which is consistent with experiment. Our results suggest a positive outlook of the FLO-SIC method in the description of magnetic exchange coupling within 3 d -element-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1991

Theoretical study of the bonding of Nb(2+) to CH2, C2H2, and C2H4

The bonding of Nb(2+) with CH2, C2H2, and C2H4 is studied by using electronic structure calculations that include high levels of electron correlation. The binding energy for NbCH2(2+) is in good agreement with the lower bound determined from the reaction with CH4 but is significantly smaller than the value determined from the binding energy and ionization potential of NbCH2(+). The calculations and a new interpretation of the experiment indicate that the larger value is in error primarily because the ionization potential of NbCH2(+) determined from bracketing charge-exchange reactions is too small. The computed binding energy of NbC2H2(2+) is in good agreement with experiment. The calculations show that the bonding is predominantly covalent in character for both NbCH2(2+) and NbC2H2(2+), whereas for NbC2H4(2+) the electronic states that are predominantly ionic and covalent are nearly degenerate. The trend in binding energies, CH2 greater than C2H2 greater than C2H4, is consistent with the energy required to prepare the ligands for bonding.

Bauschlicher, Charles W., Jr.↗
DOE OSTI2023

Ultra-fast Proton Conduction and Photocatalytic Water Splitting in a Pillared Metal–Organic Framework

Proton-exchange membrane fuel cells enable the portable utilization of hydrogen (H 2 ) as an energy resource. Current electrolytic materials have limitation, and there is an urgent need to develop new materials showing especially high proton conductivity. Here, we report the ultra-fast proton conduction in a novel metal–organic framework, MFM-808, which adopts an unprecedented topology and a unique structure consisting of two-dimensional layers of {Zr 6 }-clusters. By replacing the bridging formate with sulfate ligands within {Zr 6 }-layers, the modified MFM-808-SO 4 exhibits an exceptional proton conductivity of 0.21 S·cm –1 at 85 °C and 99% relative humidity. Modeling by molecular dynamics confirms that proton transfer is promoted by an efficient two-dimensional conducting network assembled by sulfate–{Zr 6 }-layers. MFM-808-SO 4 also possesses excellent photocatalytic activity for water splitting to produce H 2 , paving a new pathway to achieve a renewable hydrogen-energy cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Determining the Effects of Zero-Field Splitting and Magnetic Exchange in Dimeric Europium(II) Complexes

Related BAP [BAP = bis(acyl)phosphide] and Acac (Acac = β-diketonate) molecules perform as robust supports for both lanthanide and actinide metals. Here, a molecular bimetallic Eu 2+ complex was successfully targeted and isolated by employing sodium bis(mesitoyl)phosphide [Na( mes BAP)] in a salt metathesis with EuI 2 , producing [Eu( mes BAP) 2 (et 2 o)] 2 (et 2 o = metal-coordinated diethyl ether). The corresponding Acac-Eu 2+ complex was targeted using mes Acac– (1,3-dimesityl-1,3-propanedione), generating [Eu( mes Acac) 2 (et 2 o)] 2 . Both complexes were characterized by single-crystal X-ray diffraction, UV–vis, IR, and NMR spectroscopies, and variable-temperature magnetic susceptibility. [Eu( mes BAP) 2 (et 2 o)] 2 was persistent under anaerobic, anhydrous conditions, whereas the analogous [Eu( mes Acac) 2 (et 2 o)] 2 showed evidence of decomposition under identical conditions. Finally, variable-temperature magnetic susceptibility and magnetization studies of [Eu( mes BAP) 2 (et 2 o)] 2 and [Eu( mes Acac) 2 (et 2 o)] 2 were performed, resulting in similar magnetic exchange coupling values of J ex = –0.018 and –0.023 cm –1 and axial zero-field-splitting D values of –0.38 and –0.51 cm –1 , respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Strong Ferromagnetic Exchange Coupling and Single-Molecule Magnetism in MoS 4 3– -Bridged Dilanthanide Complexes

We report the synthesis and characterization of the trinuclear 4d-4f compounds [Co(C 5 Me 5 ) 2 ][(C 5 Me 5 ) 2 Ln(μ-S) 2 Mo(μ-S) 2 Ln(C 5 Me 5 ) 2 ], 1-Ln (Ln = Y, Gd, Tb, Dy), containing the highly polarizable MoS 4 3 - bridging unit. UV-Vis-NIR diffuse reflectance spectra and DFT calculations of 1-Ln reveal a low-energy metal-to-metal charge transfer transition assigned to charge transfer from the singly occupied 4d z 2 orbital of Mo V to the empty 5d orbitals of the lanthanides (4d in the case of 1-Y ), mediated by sulfur-based 3p orbitals. Electron paramagnetic resonance spectra collected for 1-Y in a tetrahydrofuran solution show large 89 Y hyperfine coupling constants of A ⊥ = 23 MHz and A || = 26 MHz, indicating the presence of significant yttrium-localized unpaired electron density. Magnetic susceptibility data support similar electron delocalization and ferromagnetic Ln-Mo exchange for 1-Gd , 1-Tb , and 1-Dy . This ferromagnetic exchange gives rise to an S = 15/2 ground state for 1-Gd and one of the largest magnetic exchange constants involving Gd III observed to date, with J Gd-Mo = +16.1(2) cm -1 . Additional characterization of 1-Tb and 1-Dy by ac magnetic susceptibility measurements reveals that both compounds exhibit slow magnetic relaxation. Although a Raman magnetic relaxation process is dominant for both 1-Tb and 1-Dy , an extracted thermal relaxation barrier of U eff = 68 cm -1 for 1-Dy is the largest yet reported for a complex containing a paramagnetic 4d metal center. Furthermore, these results provide a potentially generalizable route to enhanced n d-4f magnetic exchange, revealing opportunities for the design of new n d-4f single-molecule magnets and bulk magnetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solvothermal Synthesis of [Cr 7 S 8 (en) 8 Cl 2 ]Cl 3 ⋅ 2H 2 O with Magnetically Frustrated [Cr 7 S 8 ] 5+ Double‐Cubes**

Abstract A novel transition metal chalcohalide [Cr 7 S 8 (en) 8 Cl 2 ]Cl 3 ⋅ 2H 2 O, with [Cr 7 S 8 ] 5+ dicubane cationic clusters, has been synthesized by a low temperature solvothermal method, using dimethyl sulfoxide (DMSO) and ethylenediamine ( en ) solvents. Ethylenediamine ligand exhibits bi‐ and monodentate coordination modes; in the latter case ethylenediamine coordinates to Cr atoms of adjacent clusters, giving rise to a 2D polymeric structure. Although magnetic susceptibility shows no magnetic ordering down to 1.8 K, a highly negative Weiss constant, θ =−224(2) K, obtained from Curie‐Weiss fit of inverse susceptibility, suggests strong antiferromagnetic (AFM) interactions between S =3/2 Cr(III) centers. Due to the complexity of the system with (2 S +1) 7 =16384 microstates from seven Cr 3+ centers, a simplified model with only two exchange constants was used for simulations. Density‐functional theory (DFT) calculations yielded the two exchange constants to be J 1 =−21.4 cm −1 and J 2 =−30.2 cm −1 , confirming competing AFM coupling between the shared Cr 3+ center and the peripheral Cr 3+ ions of the dicubane cluster. The best simulation of the experimental data was obtained with J 1 =−20.0 cm −1 and J 2 =−21.0 cm −1 , in agreement with the slightly stronger AFM exchange within the triangles of the peripheral Cr 3+ ions as compared to the AFM exchange between the central and peripheral Cr 3+ ions. This compound is proposed as a synthon towards magnetically frustrated systems assembled by linking dicubane transition metal‐chalcogenide clusters into polymeric networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic excitations and spin interactions in chromium trihalides from embedded many-body wavefunctions

Although chromium trihalides are widely regarded as a promising class of two-dimensional magnets for next-generation devices, an accurate description of their electronic structure and magnetic interactions has proven challenging to achieve. Here, we quantify electronic excitations and spin interactions in CrX 3 (X = Cl, Br, I) using embedded many-body wavefunction calculations and fully generalized spin Hamiltonians. We find that the three trihalides feature comparable d-shell excitations, consisting of a high-spin 4 A 2 ($t^3_{2g}$$e^0_g$) ground state lying 1.5–1.7 eV below the first excited state 4 T 2 ($t^2_{2g}$$e^1_g$). CrCl 3 exhibits a single-ion anisotropy A sia = - 0.02 meV, while the Cr spin-3/2 moments are ferromagnetically coupled through bilinear and biquadratic exchange interactions of J 1 = - 0.97 meV and J 2 = - 0.05 meV, respectively. The corresponding values for CrBr 3 and CrI 3 increase to A sia = -0.08 meV and A sia = - 0.12 meV for the single-ion anisotropy, J 1 = -1.21 meV, J 2 = -0.05 meV and J 1 = -1.38 meV, J 2 = -0.06 meV for the exchange couplings, respectively. We find that the overall magnetic anisotropy is defined by the interplay between A sia and A dip due to magnetic dipole–dipole interaction that favors in-plane orientation of magnetic moments in ferromagnetic monolayers and bulk layered magnets. The competition between the two contributions sets CrCl 3 and CrI 3 as the easy-plane (A sia + A dip >0) and easy-axis (A sia + A dip <0) ferromagnets, respectively. The differences between the magnets trace back to the atomic radii of the halogen ligands and the magnitude of spin–orbit coupling. Our findings are in excellent agreement with recent experiments, thus providing reference values for the fundamental interactions in chromium trihalides.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis, Crystal Structure, and Optical Properties of the Barium meta -Pertechnetate Ba[TcO 4 ] 2

High-quality single crystals of the colorless title compound Ba[ 99 TcO 4 ] 2 were prepared from radioactive, isotope-pure 99 TcO 2 by oxidation with H 2 O 2 in an aqueous ammonia solution and subsequent cation metathesis using an ion-exchange column. Single-crystal X-ray diffraction revealed Ba[TcO 4 ] 2 to crystallize isotopically to Ba[MnO 4 ] 2 in the orthorhombic space group Fddd with the lattice parameters a = 747.34(5) pm, b = 1244.08(7) pm, and c = 1511.23(9) pm for Z = 8. Its crystal structure features [BaO 12 ] 22- icosahedra surrounded by ten [TcO 4 ] - tetrahedra connected via two edges and eight corners. The optical properties of Ba[TcO 4 ] 2 investigated by UV-vis spectroscopy show the broad O 2- → Tc 7+ ligand-to-metal charge transfer (2p → 4d) process within these discrete [TcO 4 ]- anions at an absorption maximum of around 350 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Extending Magnetic Core Shell Nanoparticle Extraction Technology to Cesium and Antimony Removal from Geothermal Brines in New Zealand

Our industrial client (Geo40) has developed and deployed a process to remove silica from geothermal fluids and produce a high-margin specialty colloidal silica product comparable to those of market leaders. Geo40 now wishes to explore opportunities to extend their mineral extraction operations to other elements that are present in these brines. Geo40 has identified cesium (Cs) that is present in Ohaaki brines (pH ~8–8.5) at parts per million levels and could be sold to customers if it could be produced at an attractive price. With support from the Department of Energy’s (DOE’s) Geothermal Technologies Office, a simple and highly cost-effective magnetic nanofluid method for extraction of rare earth elements (REEs) from geothermal brine solutions has been developed and demonstrated at the laboratory bench scale at Pacific Northwest National Laboratory (PNNL). Core shell sorbent particles are produced using an iron oxide core particle, which is used to anchor and grow a surrounding adsorbent shell functionalized with a chelating ligand that selectively binds REEs. We extended PNNL’s work by exploring new sorbent shells that are highly selective for Cs. Uptake of Cs was measured as a function of exposure time by analyzing solution samples extracted from batch sorption tests.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

High methylation potential of mercury complexed with mixed thiolate ligands by Geobacter sulfurreducens PCA

We report some thiols, such as cysteine (CYS) at moderate concentrations (10–500 µM), can enhance methylmercury (MeHg) formation by Geobacter sulfurreducens PCA, whereas others such as dithiol 2,3-dimercaptopropanesulfonate (DMPS) and 2,3-dimercaptosuccinic acid (DMSA) abolish mercury [Hg(II)] methylation. Little is known, however, about whether Hg(II) methylation could be enhanced or inhibited by the presence of mixed thiol ligands at low concentrations observed in the environment. Surprisingly we found that mixing CYS (1 µM) with DMPS (0.025–0.5 µM) or DMSA (0.025–1 µM) substantially increased MeHg production by 1.5–3.5-fold, compared to the no-thiol control, whereas complexation with a single DMPS, or DMSA, or CYS (1 µM) strongly inhibited Hg(II) methylation. Pre-equilibration between Hg(II) and thiols before the addition of cells was necessary to observe enhanced methylation. Spectroscopic analyses indicated the formation of mixed or heteroleptic coordinated Hg(II)-S 3 /S 4 complexes, which likely facilitated exchange of Hg(II) with cells and its uptake and internal transfer to the HgcAB proteins required for methylation. These results suggest that the effects of thiols on Hg(II) methylation were more complex than previously thought (using a single thiol) and thus underscore the importance of understanding how mixed thiols and their interactions with Hg(II) may ultimately influence MeHg production in the natural environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spin-crossover complexes: Self-interaction correction vs density correction

Complexes containing a transition metal atom with a 3d 4 –3d 7 electron configuration typically have two low-lying, high-spin (HS) and low-spin (LS) states. The adiabatic energy difference between these states, known as the spin-crossover energy, is small enough to pose a challenge even for electronic structure methods that are well known for their accuracy and reliability. In this work, we analyze the quality of electronic structure approximations for spin-crossover energies of iron complexes with four different ligands by comparing energies from self-consistent and post-self-consistent calculations for methods based on the random phase approximation and the Fermi–Löwdin self-interaction correction. Considering that Hartree–Fock densities were found by Song et al., J. Chem. Theory Comput. 14, 2304 (2018), to eliminate the density error to a large extent, and that the Hartree–Fock method and the Perdew–Zunger-type self-interaction correction share some physics, we compare the densities obtained with these methods to learn their resemblance. Here, we find that evaluating non-empirical exchange-correlation energy functionals on the corresponding self-interaction-corrected densities can mitigate the strong density errors and improves the accuracy of the adiabatic energy differences between HS and LS states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Domain coupling in activation of a family C GPCR

Abstract The G protein-coupled metabotropic glutamate receptors form homodimers and heterodimers with highly diverse responses to glutamate and varying physiological functions. We employ molecular dynamics, single-molecule spectroscopy and hydrogen–deuterium exchange to dissect the activation pathway triggered by glutamate. We find that activation entails multiple loosely coupled steps, including formation of an agonist-bound, pre-active intermediate whose transition to active conformations forms dimerization interface contacts that set efficacy. The agonist-bound receptor populates at least two additional intermediates en route to G protein-coupling conformations. Sequential transitions into these states act as ‘gates’, which attenuate the effects of glutamate. Thus, the agonist-bound receptor is remarkably dynamic, with low occupancy of G protein-coupling conformations, providing considerable headroom for modulation by allosteric ligands. Sequence variation within the dimerization interface, as well as altered conformational coupling in receptor heterodimers, may contribute to precise decoding of glutamate signals over broad spatial and temporal scales.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage

We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Retrospective on Recent DOE-Funded Studies Concerning the Extraction of Rare Earth Elements & Lithium from Geothermal Brines (Final Report)

Rare earth elements (REE) and lithium are non-toxic metals that are considered critical materials due to their use in electronics, magnets, batteries, and a wide variety of industrial processes important for the economy and military preparedness. Demand for REE and lithium is increasing and these critical materials are imported, so identifying and exploiting domestic sources of REE and lithium is a national priority. The U.S. Department of Energy (DOE) Geothermal Technologies Office (GTO) has been in the forefront of sponsoring research investigating the potential recovery of REE, lithium, and other critical minerals from geothermal brines. It has been proposed that the future of geothermal energy should include “hybrid systems” that combine electricity generation with other revenue-generating activities, such as recovery of valuable and critical minerals, including REE and lithium. Two recent GTO funding opportunities have focused on the recovery of REE and other valuable minerals from geothermal brines. The research supported by the GTO’s mineral recovery program is focused on three areas: resource characterization, technology for the extraction of REE, and technology for the extraction of lithium (Tables 1 and 2). This report is a retrospective study examining the outcome of GTO’s two recent mineral recovery programs (DE-FOA-0001016 in FY 2014 and DE-FOA-0001376 in FY 2016). In this report, the knowledge, technology, and techniques that were developed by researchers funded by GTO are summarized and discussed. Four projects were funded to assess the concentrations and amounts of REE found in geothermal brines and oil field produced waters. The GTO-funded studies compiled publically available data on REE concentrations from brines and produced water from all over the USA. In addition, new samples were collected and characterized from major geothermal and hydrocarbon basins in the Western USA. The studies examined the relationship between lithology and REE concentrations and developed models examining the influence of geology on REE concentrations in produced brines. It was determined that REE are frequently found at higher concentrations in oil field produced water than geothermal brines, but that some geothermal areas had significant REE resources. Significant reservoirs of REE were identified in the Western USA. In some cases, concentrations of REE were more than 1000 times the concentrations found in seawater. Collectively, these studies represent a comprehensive picture of REE resources associated with geothermal and hydrocarbon systems in the USA. The studies did not examine lithium resources, but in some cases, lithium concentration data was collected. Data from these studies are housed in the Geothermal Data Repository (GDR) and represent a significant information resource and it is recommended that these data be further analyzed in a future study. Eight projects were funded to develop new technology for REE extraction from geothermal fluids. These projects investigated sorption as an approach for removal and recovery of REE from geothermal brines. The projects investigated cutting-edge technology for selective sorption of ions from complex solutions, including the application of metal-organic frameworks and biosorbent proteins. The REE sorption studies tested different combinations of metal-binding ligands and solid supports. The most promising metal-binding ligands for REE included phosphonic acid, thiol, and carboxylic acid functional groups. Ligands were attached or incorporated into a wide variety of solid supports. In most cases, attachment was via covalent bonding to organic resins, polymers, or silica-based supports. Most of the REE projects were conducted at a low technology readiness level (TRL) and showed promise, but direct comparison between technologies was not possible based on the available information. It is recommended that testing and reporting be standardized to the extent possible to facilitate comparisons between technologies. Two projects were directed at novel lithium extraction technology. Both projects investigated the use of inorganic sorbents, including manganese oxides. One study also examined the use of metal- ion imprinted polymers as selective ion-exchange resins for the separation of lithium and manganese from brines. Both approaches showed promise for the selective extraction of lithium from brines, including potentially geothermal brines. Results from these GTO studies indicated that selective REE and lithium extraction is possible, but interference from co-occurring solutes, such as calcium, magnesium, or heavy metals, will interfere with process efficiency and negatively impact process economics. Techno-economic analysis conducted as part of the resource and technology studies suggest extraction of REE from geothermal brines is unlikely to be economically viable, especially since non-geothermal produced waters frequently have higher REE concentrations. It is recommended that benchmarks for techno-economic analysis be established to the extent possible for future studies, to facilitate direct comparison of various technologies. Based on the collective results of this program, it appears that hybrid geothermal power would benefit more from recovery of lithium and other metals, rather than REE. It is recommended that future studies be conducted at a higher- TRL and that sorbents be tested against actual geothermal fluid samples. Prior higher-TRL efforts to extract metals from geothermal brines should be further evaluated for lessons learned.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Overdestabilization vs Overstabilization in the Theoretical Analysis of f-Orbital Covalency

The complex nature of the f-orbital electronic structures and their interaction with the chemical environment pose significant computational challenges. Advanced computational techniques that variationally include scalar relativities and spin–orbit coupling directly at the molecular orbital level have been developed to address this complexity. Among these, variational relativistic multiconfigurational multireference methods stand out for their high accuracy and systematic improvement in studies of f-block complexes. Additionally, these advanced methods offer the potential for calibrating low-scaling electronic structure methods such as density functional theory. However, studies on the Cl K-edge X-ray absorption spectra of the [Ce(III)Cl 6 ] 3– and [Ce(IV)Cl 6 ] 2– complexes show that time-dependent density functional theory with approximate exchange–correlation kernels can lead to inaccuracies, resulting in an overstabilization of 4f orbitals and incorrect assessments of covalency. In contrast, approaches utilizing small active space wave function methods may understate the stability of these orbitals. The results herein demonstrate the need for large active space, multireference, and variational relativistic methods in studying f-block complexes.

chemical calculations↗
DOE OSTI2020

Predicting Bond Dissociation Energies and Bond Lengths of Coordinatively Unsaturated Vanadium–Ligand Bonds

Understanding the electronic structure of coordinatively unsaturated transition-metal compounds and predicting their physical properties are of great importance for catalyst design. Bond dissociation energy D e and bond length r e are two of the fundamental quantities for which good predictions are important for a successful design strategy. In the present work, recent experimentally measured bond energies and bond lengths of VX diatomic molecules (X = C, N, S) are used as a gauge to consider the utility of a number of electronic structure methods. Single-reference methods are one focus because of their efficiency and utility in practical calculations, and multireference configuration interaction (MRCISD) methods and a composite coupled cluster (CCC) method are a second focus because of their potential high accuracy. The comparison is especially challenging because of the large multireference M diagnostics of these molecules, in the range 0.15–0.19. For the single-reference methods, Kohn–Sham density functional theory (KS-DFT) has been tested with a variety of approximate exchange-correlation functionals. Of these, MOHLYP provides the bond dissociation energies in best agreement with experiments, and BLYP provides the bond lengths that are in best agreement with experiments; but by requiring good performance for both the D e and r e of the vanadium compounds, MOHLYP, MN12-L, MGGA_MS1, MGGA_MS0, O3LYP, and M06-L are the most highly recommended functionals. The CCC calculations include up to connected pentuple excitations for the valence electrons and up to connected quadruple excitations for the core–valence terms; this results in highly accurate dissociation energies and good bond lengths. In conclusion, averaged over the three molecules, the mean unsigned deviation of CCC bond energies from experimental ones is only 0.4 kcal/mol, demonstrating excellent convergence of theory and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkane Dehydrogenation and H/D Exchange by a Cationic Pincer-Ir(III) Hydride: Cooperative C–H Addition and β -H Elimination Modes Induce Anomalous Selectivity

We report that the cationic iridium complex ( iPr PCP)IrH + catalyzes the transfer-dehydrogenation of alkanes to give alkenes and hydrogen isotope exchange (HIE) of alkanes and arenes. Contrary to established selectivity trends found for C–H activation by transition metal complexes, strained cycloalkanes, including cyclopentane, cycloheptane, and cyclooctane, undergo C–H addition much more readily than n-alkanes, which in turn are much more reactive than cyclohexane. Aromatic C–H bonds also undergo H/D exchange much less rapidly than those of the strained cycloalkanes, but much more favorably than cyclohexane. The order of reactivity toward dehydrogenation correlates qualitatively with the reaction thermodynamics, but the magnitude is much greater than can be explained by thermodynamics. Accordingly, the cycloalkenes corresponding to the strained cycloalkanes undergo hydrogenation much more readily than cyclohexene, despite the less favorable thermodynamics of such hydrogenations. Here, computational (DFT) studies allow rationalization of the origin of reactivity and the unusual selectivity. Specifically, the initial C–H addition is strongly assisted by β-agostic interactions, which are particularly favorable for the strained cycloalkanes. Subsequent to α-C–H addition, the H atom of the β-agostic C–H bond is transferred directly to the hydride ligand of ( iPr PCP)IrH + to give a dihydrogen ligand.

02 PETROLEUM↗