Search NASA⌕ Search

SEARCH · Search NASA

Results for “light shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Computing the Relative Affinity of Chlorophylls a and b to Light-Harvesting Complex II

In plants and algae, the primary antenna protein bound to photosystem II is light-harvesting complex II (LHCII), a pigment–protein complex that binds eight chlorophyll (Chl) a molecules and six Chl b molecules. Chl a and Chl b differ only in that Chl a has a methyl group (–CH 3 ) on one of its pyrrole rings, while Chl b has a formyl group (–CHO) at that position. This blue-shifts the Chl b absorbance relative to Chl a . It is not known how the protein selectively binds the right Chl type at each site. Knowing the selection criteria would allow the design of light-harvesting complexes that bind different Chl types, modifying an organism to utilize the light of different wavelengths. The difference in the binding affinity of Chl a and Chl b in pea and spinach LHCII was calculated using multiconformation continuum electrostatics and free energy perturbation. Both methods have identified some Chl sites where the bound Chl type ( a or b ) has a significantly higher affinity, especially when the protein provides a hydrogen bond for the Chl b formyl group. However, the Chl a sites often have little calculated preference for one Chl type, so they are predicted to bind a mixture of Chl a and b . The electron density of the spinach LHCII was reanalyzed, which, however, confirmed that there is negligible Chl b in the Chl a -binding sites. Finally, it is suggested that the protein chooses the correct Chl type during folding, segregating the preferred Chl to the correct binding site.

chemical calculations↗
DOE OSTI2022

CRADA Number NFE-19-07846 with Grid Fruit, LLC (CRADA Final Report)

Cooperative Research and Development Agreement (CRADA) NFE-19-07846 between Oak Ridge National Laboratory (ORNL) and Grid Fruit, LLC (Grid Fruit) focused on simulating, monitoring, and adjusting controls of commercial refrigerator and freezer systems to provide load flexibility and demand response services from these machines. Viewing these medium and low-temp coolers as thermal masses, the volumes of chilled air in these coolers make them time-shiftable loads ripe for deployment at optimal times. Grid Fruit is a startup company developing methods to schedule the chilling cycles (e.g., in “build load” and “shed load” grid events) to provide energy efficiency, peak shifting, and other benefits both to the grid and the broader environment. These benefits can be magnified by coordinating chillers with HVAC, lights, computers, and other loads. Grid Fruit completed simulations and then selected and ordered controls hardware to prove the technology were successful, but the diversity of chiller models in the field without digital controls, as well as limited market demand at present, make further exploration necessary before commercialization.

42 ENGINEERING↗
DOE OSTI2024

Technical and Economic Assessment and Gap Analysis of Advanced Nuclear Reactor Integration with a Reference Oil Refinery

Efforts to identify the most-economic methods to decarbonize several sectors of the U.S. economy are underway. Industrial processes such as crude-oil refining rely heavily on energy-dense and easily stored and transported fossil fuels for powering their operations. Refineries use large amounts of energy, primarily derived from fossil sources to separate crude-oil components, break down heavier hydrocarbons into lighter compounds, remove impurities, reform hydrocarbon molecules, and generate steam and electricity for pumps and compressors and other various auxiliary systems. Crude-oil refining operations such as distillation, cracking, desulfurization, reforming, utilities systems and some offsite facilities collectively account for most of the energy consumption. Other operations such as hydrocracking or hydrotreating also require hydrogen for developing hydrogenation reactions which involve substantial heating to keep the reactors at high-temperature and pressure levels. All heat and energy demands are typically provided by natural gas (NG), oil, or other fuels, which makes refinery industry one of the most-difficult sectors to decarbonize. Nuclear power is a viable and energy-dense source of clean electricity, heat, and hydrogen to provide the large, sustainable energy supply that the refining industry demands. The U.S. Department of Energy’s (DOE’s) Integrated Energy Systems (IES) program is working to perform research and development, design, economic siting, and risk analysis. This state-of-the-art work will enable the first on-site demonstrations and commercial deployments of advanced small modular nuclear reactors (SMNRs) integrated with industries such as chemical production, refining, iron and steel making, and more. IES seeks to demonstrate the ability of advanced nuclear reactors to meet the heat and power demands of these industries while reducing carbon emissions in a sustainable and cost-competitive way. The primary objective of this research effort is to analyze industrial-scale SMNR integration intended to decarbonize refining facilities. The foreseen outcome is the provision of reliable, cost-competitive, and sustainable clean energy, alongside a reduction of carbon emissions. Specifically, the focus of this work lies on meeting the reference facilities’ heat and electricity demands with nuclear power while also supplying clean hydrogen via integrated high-temperature steam electrolysis (HTSE). This report presents a comprehensive technical and economic assessment of the integration of advanced nuclear reactors into a reference refinery, leveraging financial incentives from the Inflation Reduction Act (IRA). The evaluation aims to explore the potential economic benefits and challenges associated with incorporating advanced nuclear reactors into refinery operations, particularly in terms of energy efficiency, economic implications and environmental impact. By examining both the technical feasibility and economic viability, this analysis seeks to identify existing gaps and propose solutions for successful nuclear integration implementation. The findings are intended to provide valuable insights for stakeholders considering the adoption of advanced nuclear reactors in the refining sector. A refinery reference-plant was developed, using an open-source refinery model, Petroleum Refinery Lifecycle Inventory Model (PRELIM) and expert assessment, as a base case for comparison with various nuclear integration options. The capacity of 100 kbd/day (KBD) of heavy crude-oil feed was selected to represent a general coking-type refinery with deep conversion capabilities (incorporating heavy-oil upgrading with FCC, coking, and associated hydrotreating process units), using a heavy crude-oil feed, which represents about 70% of U.S. refineries configurations. A summary of all cases considered in this study is shown in Table 1.

13 HYDRO ENERGY↗
DOE OSTI2021

Plutonium Production Reactor Progression Problems: Magnox Neutronics Benchmarks

The goal of this document is to provide a set of comprehensive benchmarking neutronics problems for gas-cooled, graphite-moderated reactors. The problems are designed to be representative problems that increase in complexity to test performance of various codes. For the simulation of the benchmarking problems, the Shift Monte Carlo code and MPACT deterministic code are chosen because of their state-of-the-art capabilities, which are optimized for various reactor designs. Because these codes have been developed primarily for light water reactor applications, their application to graphite-moderated, gas-cooled reactors has not been extensively explored. This report attempts to evaluate benchmarks for a Magnox-style reactor, one that is graphite-moderated and gas-cooled. Parameters that are calculated and presented in this benchmark include the eigenvalue, peaking factors, and isotope concentrations. Results show good agreement between Shift and MPACT, and demonstrate the capability of MPACT to model graphite-moderated systems well.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Contributions From Cloud Morphological Changes to the Interannual Shortwave Cloud Feedback Based on MODIS and ISCCP Satellite Observations

The surface temperature-mediated change in cloud properties, referred to as the cloud feedback, continues to dominate the uncertainty in climate projections. A larger number of contemporary global climate models (GCMs) project a higher degree of warming than the previous generation of GCMs. This greater projected warming has been attributed to a less negative cloud feedback in the Southern Ocean. Here, we apply a novel “double decomposition method” that employs the “cloud radiative kernel” and “cloud regime” concepts, to two data sets of satellite observations to decompose the interannual cloud feedback into contributions arising from changes within and shifts between cloud morphologies. Our results show that contributions from the latter to the cloud feedback are large for certain regimes. We then focus on interpreting how both changes within and between cloud morphologies impact the shortwave cloud optical depth feedback over the Southern Ocean in light of additional observations. Results from the former cloud morphological changes reveal the importance of the wind response to warming increases low- and mid-level cloud optical thickness in the same region. Results from the latter cloud morphological changes reveal that a general shift from thick storm-track clouds to thinner oceanic low-level clouds contributes to a positive feedback over the Southern Ocean that is offset by shifts from thinner broken clouds to thicker mid- and low-level clouds. Our novel analysis can be applied to evaluate GCMs and potentially diagnose shortcomings pertaining to their physical parameterizations of particular cloud morphologies.

58 GEOSCIENCES↗
DOE OSTI2020

White-line evolution in shocked solid Ta evidenced by synchrotron x-ray absorption spectroscopy

Time-resolved x-ray absorption experiments have been performed on shocked tantalum. Using a single 100 ps synchrotron x-ray pulse, nanosecond-lived equilibrium states of shocked solid Ta have been measured by L 3 -edge absorption spectroscopy. The energy shift and intensity change of the white line were measured up to 130 GPa and 2000 K. The experimental results are discussed in light of density functional theory calculations and FEFF simulations. Lastly, the absence of occurrence of the hcp-ω phase is suggested from the analysis of the shape of the white line.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Precision Spectroscopy of 20 O Benchmarking Ab Initio Calculations in Light Nuclei

The excited states of unstable 20 O were investigated via γ-ray spectroscopy following the 19 O(d, p) ⁢20 O reaction at 8 A⁢ MeV. By exploiting the Doppler shift attenuation method, the lifetimes of the $2^+_2$ and $3^+_1$ states were firmly established. From the γ-ray branching and E⁢2/M⁢1 mixing ratios for transitions deexciting the $2^+_2$ and $3^+_1$ states, the B⁡(E⁢2) and B⁡(M⁢1) were determined. Various chiral effective field theory Hamiltonians, describing the nuclear properties beyond ground states, along with a standard USDB interaction, were compared with the experimentally obtained data. Such a comparison for a large set of γ-ray transition probabilities with the valence space in medium similarity renormalization group ab initio calculations was performed for the first time in a nucleus far from stability. It was shown that the ab initio approaches using chiral effective field theory forces are challenged by detailed high-precision spectroscopic properties of nuclei. Finally, the reduced transition probabilities were found to be a very constraining test of the performance of the ab initio models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Light-driven permanent transition from insulator to conductor

The transition from insulator to conductor can be realized in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a different mechanism the lattice may adopt to induce such a transition. Experiments showed the surprising finding that limited exposure to subband-gap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga 2 O 3 , with a nine orders of magnitude increase in electronic conduction. Furthermore, annealing up to 400 °C did not suppress or decrease the induced conductivity. Photoexcitation by light-induced modification in the charge state of defects and subsequent lattice distortion around them was suggested to be the underlying mechanism behind this transition. Density functional theory calculations confirmed that modifying the charge state of defects leads to redistribution of the localized electrons and massive structural distortion in the surrounding lattice, causing large shifts in the density of states and introducing new states with shallower energy levels. Both experimental and theoretical results revealed the introduction of stable shallow energy levels, explaining the mechanism behind the transition from an insulator to a conductor state by light. We suggest that this mechanism may occur in other wide band-gap metal oxides leading to drastic modification in their electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

(NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a Vacancy-Ordered Three-Dimensional Tin(II) Perovskite-Derived Semiconductor

Ordering vacancies in hybrid Sn(II) halide semiconductors provides a strategy for preventing uncontrolled oxidation and formation of mobile holes. In this study, we report the structure and optical and electronic properties of (NH 3 (CH 2 ) 7 NH 3 ) 2 Sn 3 I 10 , a vacancy-ordered perovskite derivative with three-dimensional inorganic connectivity. The crystal structure resembles that of a Dion–Jacobson layered perovskite derivative, but with [SnI 5 ] square pyramids bridging the layers. UV–vis diffuse reflectance spectroscopy reveals a sharp onset of light absorption at 1.86(1) eV with the photoluminescence emission maximum at 1.90(1) eV. However, the maximum excitation occurs from 3.42 to 3.81 eV (325 to 370 nm), revealing a significant Stokes shift of 1.3 eV. The electronic properties determined from dark and time-resolved microwave conductivity measurements reveal a minimum carrier mobility of 4.3 × 10 –2 cm 2 V –1 s –1 and a maximum carrier density of 5.96 × 10 16 cm –3 , a uniquely low value for a hybrid Sn(II) halide semiconductor. The transport behavior in combination with first-principles calculations of the electronic band structure and dielectric permittivity suggest polaron-mediated electronic transport, yet the photogenerated carriers have a fast and fluence-dependent nonradiative recombination rate, suggestive of localized “defect-like” states at the band edge. The observed photoluminescence is most consistent with single-ion-like behavior of an asymmetric Sn(II) environment. Together, these results suggest that defect ordering presents a strategy for the reduction of mobile charge carriers at equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Industrial deposition of wavelength-shifting films for liquid argon photon detection systems

The Deep Underground Neutrino Experiment (DUNE) Phase-II Far Detector is considering an approximately 2000 m 2 photon detection system to achieve a target mean light yield of 180 PE/MeV. Meeting this requirement demands scalable, cost-effective, and high-quality wavelength-shifter (WLS) coatings capable of converting 127 nm liquid-argon scintillation light into visible photons with controlled and reproducible optical performance. We report on the successful realization of an industrial physical vapor deposition (PVD) process forp-terphenyl (pTP) coatings, adapted from vacuum deposition techniques developed for OLED display manufacturing, to produce uniform WLS layers on large-area inorganic substrates, a task traditionally challenged by adhesion and uniformity issues at organic-inorganic interfaces. Surface characterization by profilometry and spectroscopic measurements demonstrates edge-region thickness variation below 10% and emission spectra consistent with high-quality pTP reference samples. The industrial process demonstrates reproducibility, scalability, and significantly reduced production time compared to laboratory-based methods, while maintaining optical characteristics consistent with established pTP reference samples. These results establish a viable pathway for mass production of high-performance pTP coatings for DUNE FD3 and future neutrino experiments, from a coating manufacturing and process standpoint. Detector-level performance validation, including quantitative VUV conversion efficiency measurements at 127 nm, is identified as future work.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Topologically trivial gap-filling in superconducting Fe(Se,Te) by one-dimensional defects

Abstract Structural distortions and imperfections are a crucial aspect of materials science, on the macroscopic scale providing strength, but also enhancing corrosion and reducing electrical and thermal conductivity. At the nanometre scale, multi-atom imperfections, such as atomic chains and crystalline domain walls have conversely been proposed as a route to topological superconductivity, whose most prominent characteristic is the emergence of Majorana Fermions that can be used for error-free quantum computing. Here, we shed more light on the nature of purported domain walls in Fe(Se,Te) that may host 1D dispersing Majorana modes. We show that the displacement shift of the atomic lattice at these line-defects results from sub-surface impurities that warp the topmost layer(s). Using the electric field between the tip and sample, we manage to reposition the sub-surface impurities, directly visualizing the displacement shift and the underlying defect-free lattice. These results, combined with observations of a completely different type of 1D defect where superconductivity remains fully gapped, highlight the topologically trivial nature of 1D defects in Fe(Se,Te).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Gamow-shell-model description of Li isotopes and their mirror partners

Background: Weakly bound and unbound nuclei close to particle drip lines are laboratories of new nuclear structure physics at the extremes of neutron/proton excess. The comprehensive description of these systems requires an open quantum system framework that is capable of treating resonant and nonresonant many-body states on equal footing. Purpose: In this work, we develop the complex-energy configuration interaction approach to describe binding energies and spectra of selected 5 ≤ $\textit{A}$ ≤ 11 nuclei. Method: We employ the complex-energy Gamow shell model (GSM) assuming a rigid 4 He core. The effective Hamiltonian, consisting of a core-nucleon Woods-Saxon potential and a simplified version of the Furutani-Horiuchi-Tamagaki interaction with the mass-dependent scaling, is optimized in the $\textit{sp}$ space. To diagonalize the Hamiltonian matrix, we employ the Davidson method and the Density Matrix Renormalization Group technique. Results: We report our optimized GSM Hamiltonian offers a good reproduction of binding energies and spectra with the root-mean-square (rms) deviation from experiment of 160 keV. Since the model performs well when used to predict known excitations that have not been included in the fit, it can serve as a reliable tool to describe poorly known states. A case in point is our prediction for the pair of unbound mirror nuclei 10 Li – 10 N in which a huge Thomas-Ehrman shift dramatically alters the pattern of low-energy excitations. Conclusion: The new model will enable comprehensive studies of structure and reactions aspects of light drip-line nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Redox Biochemistry of Energy Conservation in Methanogens and their Syntrophic Partners

The primary objective of this project was to uncover previously unknown modes by which living organisms harvested energy. Specifically, it queried microbial systems, which were once thought to not be able to utilize oxygen. Through the use of cutting-edge approaches, we were able to identify novel mechanistic processes that allow organisms to thrive under varying environmental conditions. This constitutes a paradigm shift in the field. Our work has opened new vistas for expanding the horizons of energy conservation in biological systems, as well as shed light on green energy innovations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Flash Formation of I-Rich Clusters during Multistage Halide Segregation Studied in MAPbI 1.5 Br 1.5

Wide band gap mixed halide perovskites such as MAPb(I 1–x Br x ) 3 sparked great research interest because of their outstanding optoelectronic properties, ease of fabrication, and band gap tunability. Their application thus far is however limited by light-induced halide segregation in which microscopic clusters with a high iodide content are formed and act as recombination centers. The key mechanism(s) underlying this halide segregation process are still debated. Here, we present a study on the photoluminescence evolution in MAPb(I 1.5 Br 1.5 ) perovskites with varying microstructures under constant illumination at room temperature and at elevated temperature. Our findings reveal a more complicated picture of the segregation mechanism occurring in three stages instead of two as commonly reported. The process starts with a flash formation of I-rich domains. Following is a rapid blue shift before the gradual and typically observed red shift occurs. The evolution of the three stages is fully reversible in the dark and is also present at elevated temperatures (50 °C). We explain the existence of multiple stages during light-induced halide segregation by natural compositional fluctuations of the halides and the formation of halide clusters with a dynamically changing distribution in I–Br content. The variation in the I–Br ratio depends on the grain size and film heterogeneity. Overall, these findings add further details in the quest of unraveling the underlying segregation mechanism(s), which need to be identified to stabilize halides in wide band gap perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Comparison of the Forward and Reverse Photocycle Dynamics of Two Highly Similar Canonical Red/Green Cyanobacteriochromes Reveals Unexpected Differences

Cyanobacteriochromes (CBCRs) are cyanobacterial photoreceptors that exhibit photochromism between two states: a thermally stable dark-adapted state and a metastable light-adapted state with bound linear tetrapyrrole (bilin) chromophores possessing 15Z and 15E configurations, respectively. The photodynamics of canonical red/green CBCRs have been extensively studied; however, the time scales of their excited-state lifetimes and subsequent ground-state evolution rates widely differ and, at present, remain difficult to predict. Here, we compare the photodynamics of two closely related red/green CBCRs that have substantial sequence identity (~68%) and similar chromophore environments: AnPixJg2 from Anabaena sp. PCC 7120 and NpR6012g4 from Nostoc punctiforme. Using broadband transient absorption spectroscopy on the primary (125 fs to 7 ns) and secondary (7 ns to 10 ms) time scales together with global analysis modeling, our studies revealed that AnPixJg2 and NpR6012g4 have comparable quantum yields for initiating the forward ( 15Z P r → 15E P g ) and reverse ( 15E P g → 15Z P r ) reactions, which proceed through monotonic and nonmonotonic mechanisms, respectively. In addition to small discrepancies in the kinetics, the secondary reverse dynamics resolved unique features for each domain: intermediate shunts in NpR6012g4 and a Meta-Gf intermediate red-shifted from the 15Z P r photoproduct in AnPixJg2. Altogether, this study supports the conclusion that sequence similarity is a useful criterion for predicting pathways of the light-induced evolution and quantum yield of generating primary intermediate Φ p within subfamilies of CBCRs, but more studies are still needed to develop a comprehensive molecular level understanding of these processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

NEAMS Milestone Report: M2MS–20OR030102 FW–CADIS PWR Ex-Core Analysis with Shift Through VERA

This report presents the work completed for the NEAMS milestone M2MS–20OR030102 titled "FW–CADIS PWR Ex-Core Analysis with Shift through VERA." The work completed for this milestone includes the implementation, integration, and optimization of memory and performance improvement methods in Shift for fully coupled ex-core calculations through Virtual Environment for Reactor Applications (VERA). Fully coupled in this context means the transfer of moderator boron concentration, pin-wise fission source, depleted compositions, temperatures, and moderator densities from MPACT (with COBRA-TF (CTF)) to Shift. The ability to run ex-core calculations with VERA has been enabled and used for several years by Consortium for Advanced Simulation of Light Water Reactors (CASL) partners. However, this implementation was limited and potentially computationally burdensome. This work has enabled the ability to run higher-fidelity ex-core calculations on moderate computing clusters by focusing on multithreading, domain decomposition, and Forward-Weighted CADIS (FW-CADIS) variance reduction. Tests performed on small cores, a small modular reactor (SMR), and CASL progression problems show very promising memory reduction and computational performance. Recommendations for settings when running fully coupled high-fidelity ex-core calculations with VERA are documented. Without these optimization methods, many processors on a compute node would be left unused for the entire ex-core calculation. Therefore, these methods enable the user to better use the resources available and reduce computation time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Computing Nonequilibrium Responses with Score-Shifted Stochastic Differential Equations

Using equilibrium fluctuations to understand the response of a physical system to an externally imposed perturbation is the basis for linear response theory, which is widely used to interpret experiments and shed light on microscopic dynamics. For nonequilibrium systems, perturbations cannot be interpreted simply by monitoring fluctuations in a conjugate observable and general response results rely on path ensemble averaging. Furthermore, these techniques do not apply to perturbations that affect the diffusion tensor in a stochastic system. Here, we introduce an “effective” physical process that represents the diffusion perturbed dynamics and enables accurate calculations of responses to a change in the diffusion. Interestingly, the effective dynamics contain an additional drift involving the instantaneous “score” of the system, and we leverage score matching algorithms to carry out nonequilibrium response calculations on systems for which the exact stationary distribution is unknown.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗