SEARCH · Search NASA

Results for “local adaptation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Adaptive Shape Functions and Internal Mesh Adaptation for Modelling Progressive Failure in Adhesively Bonded Joints

Enhanced finite elements are elements with an embedded analytical solution that can capture detailed local fields, enabling more efficient, mesh independent finite element analysis. The shape functions are determined based on the analytical model rather than prescribed. This method was applied to adhesively bonded joints to model joint behavior with one element through the thickness. This study demonstrates two methods of maintaining the fidelity of such elements during adhesive non-linearity and cracking without increasing the mesh needed for an accurate solution. The first method uses adaptive shape functions, where the shape functions are recalculated at each load step based on the softening of the adhesive. The second method is internal mesh adaption, where cracking of the adhesive within an element is captured by further discretizing the element internally to represent the partially cracked geometry. By keeping mesh adaptations within an element, a finer mesh can be used during the analysis without affecting the global finite element model mesh. Examples are shown which highlight when each method is most effective in reducing the number of elements needed to capture adhesive nonlinearity and cracking. These methods are validated against analogous finite element models utilizing cohesive zone elements.

computational mechanics↗

NASA NTRS2001

On the Application of Hilbert Spectral Analysis for Climate Studies

The Hilbert spectral analysis (Huang et al, 1998, Proceedings of the Royal Society of London, A 454, pp 903-995) consisted of two steps: First, the data has to be reduced into a finite number of Intrinsic Mode Function by the Empirical Mode Decomposition method, then the resulting Intrinsic Mode Functions are converted to time-frequency-energy distribution through Hilbert transform. In this approach, the Empirical Mode Functions served as the basis functions with which the data is expanded. This basis function is adaptive, and the decomposition is nonlinear. Furthermore, as the Hilbert transform is a singular transform, it retains a high degree of local information. The instantaneous frequency is determined by differentiation of the phase function; therefore, there is no restriction of the 'uncertainty principle' for all the time-frequency analysis resulting from a priori basis approach. With the adaptive basis and the instantaneous frequency, the Hilbert Spectral analysis can represent data from nonlinear and nonstationary processes without resorting to the harmonics. Another advantage of using instantaneous frequency is the ability to find out frequency from limited length of data, which is a critical problem in climate studies. As the processes driving the climate changes could be both nonlinear and nonstationary, the Hilbert Spectral Analysis could be of great use in examining the underlying mechanisms. A preliminary study based on the length of day data will be presented as example for the application of the Hilbert Spectral Analysis for climate study.

Huang, Norden E.↗

NASA NTRS2009

Self-Supervised Learning of Terrain Traversability from Proprioceptive Sensors

Robust and reliable autonomous navigation in unstructured, off-road terrain is a critical element in making unmanned ground vehicles a reality. Existing approaches tend to rely on evaluating the traversability of terrain based on fixed parameters obtained via testing in specific environments. This results in a system that handles the terrain well that it trained in, but is unable to process terrain outside its test parameters. An adaptive system does not take the place of training, but supplements it. Whereas training imprints certain environments, an adaptive system would imprint terrain elements and the interactions amongst them, and allow the vehicle to build a map of local elements using proprioceptive sensors. Such sensors can include velocity, wheel slippage, bumper hits, and accelerometers. Data obtained by the sensors can be compared to observations from ranging sensors such as cameras and LADAR (laser detection and ranging) in order to adapt to any kind of terrain. In this way, it could sample its surroundings not only to create a map of clear space, but also of what kind of space it is and its composition. By having a set of building blocks consisting of terrain features, a vehicle can adapt to terrain that it has never seen before, and thus be robust to a changing environment. New observations could be added to its library, enabling it to infer terrain types that it wasn't trained on. This would be very useful in alien environments, where many of the physical features are known, but some are not. For example, a seemingly flat, hard plain could actually be soft sand, and the vehicle would sense the sand and avoid it automatically.

Bajracharya, Max↗

NASA NTRS1992

Interactive solution-adaptive grid generation

TURBO-AD is an interactive solution-adaptive grid generation program under development. The program combines an interactive algebraic grid generation technique and a solution-adaptive grid generation technique into a single interactive solution-adaptive grid generation package. The control point form uses a sparse collection of control points to algebraically generate a field grid. This technique provides local grid control capability and is well suited to interactive work due to its speed and efficiency. A mapping from the physical domain to a parametric domain was used to improve difficulties that had been encountered near outwardly concave boundaries in the control point technique. Therefore, all grid modifications are performed on a unit square in the parametric domain, and the new adapted grid in the parametric domain is then mapped back to the physical domain. The grid adaptation is achieved by first adapting the control points to a numerical solution in the parametric domain using control sources obtained from flow properties. Then a new modified grid is generated from the adapted control net. This solution-adaptive grid generation process is efficient because the number of control points is much less than the number of grid points and the generation of a new grid from the adapted control net is an efficient algebraic process. TURBO-AD provides the user with both local and global grid controls.

Choo, Yung K.↗

NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

This report describes a numerical method for generating 3-D grids for general configurations. The basic method involves the solution of a set of quasi-linear elliptic partial differential equations via pointwise relaxation with a local relaxation factor. It allows specification of the grid spacing off the boundary surfaces and the grid orthogonality at the boundary surfaces. It includes adaptive mechanisms to improve smoothness, orthogonality, and flow resolution in the grid interior.

Chen, S. C.↗

NASA NTRS1988

Three-dimensional adaptive grid generation for body-fitted coordinate system

Chen, S. C.↗

NASA NTRS1994

Adaptive-wall wind-tunnel research at Ames Research Center: A retrospective

This paper reviews adaptive-wall wind-tunnel research conducted at Ames Research Center between 1978 and 1988. This research focused on developing ways to apply the concept of adaptive walls in transonic test sections with ventilated walls. In the approach pursued at Ames, local mass flow through slotted test-section walls was controlled by adjusting the pressure in compartments of a segmented plenum; the flow measurements required to test compatibility of the wind-tunnel flow with free-air boundary conditions were made using a laser velocimeter; empirical influence coefficients were used to predict how pressure changes in the plenum would effect the flow. Both two- and three-dimensional proof-of-concept experiments were conducted in a small indraft wind tunnel. Subsequently, a two-dimensional test section was demonstrated in the Ames 2x2 ft. Transonic Wind Tunnel-a wind tunnel representative of a production facility. The 2x2 ft.tests showed large reductions of wall interference; however, the time required to make the necessary flow measurements and plenum pressure adjustments far exceeded what would be acceptable for production testing. This was primarily because the imaginary surface where free-air compatibility was tested had to be separated from the test section walls to avoid the complex, viscous flow adjacent to the walls. It is unlikely that the Ames approach to adaptive walls will be applied in production wind tunnels. The two biggest unresolved problems are how to quickly and accurately make the necessary flow measurements and how to predict the effects of wall adjustments. In contrast, flexible-wall technology for two-dimensional testing is ready for application in production wind tunnels. However, neither the ventilated- nor flexible-wall approach has been shown to be a technically viable and cost-effective solution to the three-dimensional adaptive wall problem.

Schairer, Edward T.↗

NASA NTRS1974

Cluster analysis based on dimensional information with applications to feature selection and classification

A new clustering algorithm is presented that is based on dimensional information. The algorithm includes an inherent feature selection criterion, which is discussed. Further, a heuristic method for choosing the proper number of intervals for a frequency distribution histogram, a feature necessary for the algorithm, is presented. The algorithm, although usable as a stand-alone clustering technique, is then utilized as a global approximator. Local clustering techniques and configuration of a global-local scheme are discussed, and finally the complete global-local and feature selector configuration is shown in application to a real-time adaptive classification scheme for the analysis of remote sensed multispectral scanner data.

Eigen, D. J.↗

NASA NTRS1980

Effect of cervicolabyrinthine impulsation on the spinal reflex apparatus

In view of the fact that the convergence effect of vestibular impulsation may both stimulate and inhibit intra and intersystemic coordination of physiological processes, an attempt was made to define the physiological effect on the spinal reflex apparatus of the convergence of cervicolabyrinthine impulsation on a model of the unconditioned motor reflex as a mechanism of the common final pathway conditioning the formation and realization of a focused beneficial result of human motor activities. More than 100 persons subjected to rolling effect and angular acceleration during complexly coordinated muscular loading were divided according to typical variants of the functional structure of the patella reflex in an experiment requiring 30 rapid counterclockwise head revolutions at 2/sec with synchronous recording of a 20 item series of patella reflex acts. A knee jerk coefficient was used in calculations. In 85 percent of the cases 2 patellar reflexograms show typical braking and release of knee reflex and 1 shows an extreme local variant. The diagnostic and prognostic value of these tests is suggested for determining adaptive possibilities of functional systems in respect to acceleration and proprioceptive stimuli.

Yarotskiy, A. I.↗

NASA NTRS1984

Development of graphite composite adapter for Galileo spacecraft

This paper discusses the Galileo spacecraft adapter: its interface loads and stiffness capability; configuration design/analysis methodology; verification of buckling margin, local stresses, and mass properties; and the basis for graphite-epoxy material selections and tooling approach, as well as the fabrication, layup, machining, assembly, and drilling processes.

Archer, J. S.↗

NASA NTRS1992

Demonstration of magnetic domain boundary movement using an easily assembled videocam-microscope system

The objectives are to build and demonstrate a low cost and highly flexible TV microscope facility and then use it to view the motion of magnetic domain boundaries as the local magnetic field is varied. The expense of an optical microscope and the videocam adapters sold for them is largely avoided by using the facility described below. The equipment, supplies, and procedure are presented.

Patterson, John W.↗

NASA NTRS1999

An Evidenced-Based Approach for Estimating Decompression Sickness Risk in Aircraft Operations

Estimating the risk of decompression Sickness (DCS) in aircraft operations remains a challenge, making the reduction of this risk through the development of operationally acceptable denitrogenation schedules difficult. In addition, the medical recommendations which are promulgated are often not supported by rigorous evaluation of the available data, but are instead arrived at by negotiation with the aircraft operations community, are adapted from other similar aircraft operations, or are based upon the opinion of the local medical community. We present a systematic approach for defining DCS risk in aircraft operations by analyzing the data available for a specific aircraft, flight profile, and aviator population. Once the risk of DCS in a particular aircraft operation is known, appropriate steps can be taken to reduce this risk to a level acceptable to the applicable aviation community. Using this technique will allow any aviation medical community to arrive at the best estimate of DCS risk for its specific mission and aviator population and will allow systematic reevaluation of the decisions regarding DCS risk reduction when additional data are available.

Robinson, Ronald R.↗

NASA NTRS2017

Cart3D Simulations for the Second AIAA Sonic Boom Prediction Workshop

Simulation results are presented for all test cases prescribed in the Second AIAA Sonic Boom Prediction Workshop. For each of the four nearfield test cases, we compute pressure signatures at specified distances and off-track angles, using an inviscid, embedded-boundary Cartesian-mesh flow solver with output-based mesh adaptation. The cases range in complexity from an axisymmetric body to a full low-boom aircraft configuration with a powered nacelle. For efficiency, boom carpets are decomposed into sets of independent meshes and computed in parallel. This also facilitates the use of more effective meshing strategies - each off-track angle is computed on a mesh with good azimuthal alignment, higher aspect ratio cells, and more tailored adaptation. The nearfield signatures generally exhibit good convergence with mesh refinement. We introduce a local error estimation procedure to highlight regions of the signatures most sensitive to mesh refinement. Results are also presented for the two propagation test cases, which investigate the effects of atmospheric profiles on ground noise. Propagation is handled with an augmented Burgers' equation method (NASA's sBOOM), and ground noise metrics are computed with LCASB.

Prediction↗

NASA NTRS2018

Development and Qualification of the Primary Structure of the Orion European Service Module

This paper presents an overview of the development and qualification test campaign for the primary structure of the European Service Module of ORION, the NASA spacecraft which will serve the future human exploration missions to the Moon, Mars and beyond. Under an agreement between NASA and ESA, the ORION will be powered by a European Service Module (ESM), providing also water and oxygen for astronauts' life sustainability. The development and qualification of the European Service Module (ESM) is under ESA responsibility with Airbus Defense and Space as the prime contractor. Thales Alenia Space Italia is responsible for design development, manufacturing, assembly and qualification of the Structure subsystem. The European Service Module, installed onto the launch adapter, shall support the crew module with its adapter and a launch abort system. It shall sustain: - A combination of global and local launch loads during lift off and ascent phases, - On orbit loads induced by engine firing for orbital transfers and attitude control. The ESM structure is based on a core made of Composite Fiber Reinforced Polymer (CFRP) sandwich panels complemented by aluminum alloy platforms, longerons and secondary structures. A development campaign has been implemented in order to define and validate composite parts' strength allowable values for design: coupon tests at material level, test at component level up to breadboards tests performed on main structural components (composite to metallic joints, and at panels' discontinuities). An incremental approach as defined in [1] has been followed. A qualification static test campaign at primary structure assembly level has been implemented in order to validate the design against static stiffness and ultimate strength as well as to correlate the structural Finite Element Model (FEM) used for sizing and confirm the margins of safety. The tests have been performed successfully by Thales Alenia Space Italia (TAS-I) on two flight representative structural models (STA1, STA2), in Turin facilities (Italy) between August 2015 and March 2017, with engineering support of technical representatives from Airbus, ESA, NASA and LMCO. The main development and qualification test activities and associated results are presented and discussed in the paper

Structural Testing↗

NASA NTRSDate not supplied

Assessing the Viability of Using GEOS-Forecast Product for Landslides Forecasting: A Step Toward Early Warning System

Landslides across the globe are mostly triggered by extreme rainfall events affecting infrastructure, transportation and livelihoods. The risks are rarely quantified due to lack of data, analytical skills and limited modeling techniques. Knowledge of local to global scale landslide risks provides communities and national agencies the ability to adapt disaster management practices to mitigate and recover from these hazards. In order to minimize the risks and improve characterization of community resilience to landslides, it is vital to have reliable information about the factors triggering landslides such as rainfall, well ahead in time. Forecasting potential landslide activity and impacts can be achieved through reliable precipitation forecast models. However, it is challenging because of the temporal and spatial variability of precipitation, an important factor in triggering landslides. Evaluation of the precipitation field, associated errors, and sampling uncertainties is integral for development of efficient and reliable landslide forecasting and early warning system. This study develops a methodology to assess the viability of using a precipitation field provided by a global model and its potential integration in the landslide forecasting system. The study focuses on the comparison between the IMERG (Integrated Multi-satellitE Retrievals for Global Precipitation Mission) and GEOS (NASA Goddard Earth Observing System)-Forecast product over contiguous United States (CONUS). GEOS model assimilates new observations every 6 hours, at 00, 06, 12, and 18 UTC. The framework is tested on the GEOS-Forecast Model initialized at 00 UTC using daily IMERG early product as reference using both categorical and continuous statistics. The categorical statistics includes the probability of detection (POD), success ratio (SR), critical success index (CSI), and the hit bias. Continuous statistics such as correlation, normalized standard deviation, and root-mean-square error are also evaluated. Overall, GEOS-Forecast precipitation field over the analysis period (~1 year) show underestimation with respect to IMERG early for the daily accumulated rainfall. However, the probability distribution function and cumulative distribution function of both show similar patterns. In terms of correlations, POD, SR, CSI, hit bias, the performance varies with respect to the rainfall threshold used.

Sana Khan↗

NASA NTRSDate not supplied

Recent Progress on Rans-Based Transition Model Verification

The current efforts to assess and improve the Reynolds-averaged Navier-Stokes (RANS)-coupled transition models in the NASA FUN3D and OVERFLOW codes are summarized in this study. The first AIAA Transition Modeling Workshop and the NATO AVT-313 Transition Workshop both emphasized the need for code verification for transport equations based transition models as a top priority. We discuss the methods used for the model verification, the resulting grid families, the flow solutions, and other supporting information collected with at least two established NASA flow solvers, namely, FUN3D and OVERFLOW. These results, which will be uploaded onto the NASA Turbulence Modeling Resource, should assist other members of the computational fluid dynamics (CFD) community in verifying their own implementations of various transition models, such as the Langtry-Menter (LM2009) model, the one-equation γ model, and Coder’s amplification factor transport (AFT) model. Grid convergence is assessed using both global and local flow metrics of interest such as lift and drag as well as local skin-friction coefficients. We also explore the anisotropic unstructured metric-based adaptive mesh refinement library known as refine with the NASA FUN3D solver to determine if this capability can achieve the same accuracy as handcrafted structured grids with a significantly smaller node count and to learn the characteristics of the resulting grid distribution, especially in the vicinity of the transition zone.

Transition↗

NASA NTRSDate not supplied

Recent Progress on RANS-Based Transition Model Verification

RANS↗

NASA NTRS2023

Wildfire Adaptation in the Russian Arctic: A Systematic Policy Review

A scientific consensus acknowledges that climate change has increased wildfire activity in the Russian Arctic, a trend projected to continue in response to further warming. Regional governments across Russia have started to design and develop adaptation policies and plans (i.e. outputs) to this end. Our comprehensive understanding on the state of wildfire adaptation in policy is limited. In this article we systematically review policies and plans developed to adapt to wildfires in the Russian Arctic. Using systematic approaches, we identify 12 wildfire adaptation outputs adopted between 2008 and 2020. Our findings indicate that wildfire adaptation outputs are aimed at reducing the risk of wildfires and improve wildland fire response, implemented through legislative and regulatory mechanisms, developed at the regional level, adopted in response to national mandates, and mainstreamed into existing forest management policies. Although there is evidence of wildfire adaptation planning occurring in the Russian Arctic, we find that the nature and extent of wildfire adaptation outputs are not sufficient to address the seriousness and severity of climate change, with key shortcomings found in relation to the scientific, human, and management characteristics. We argue that expanding the profile of climate change research in the Russian Arctic and improving the dialogue among researchers, local and Indigenous peoples, and decision-makers are critical for providing useful recommendations for policy makers to accelerate wildfire adaptation in the Russian Arctic.

Wildfire↗