Search NASA⌕ Search

SEARCH · Search NASA

Results for “microalgae”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Tolerance to allelopathic inhibition by free fatty acids in five biofuel candidate microalgae strains

Contaminating organisms (grazers, pathogens, competitors) and self-inhibition by algae-produced allelopathic chemicals are two issues that may limit the productivity of algal cultivation for bioproducts. One potential solution is to identify algal strains that are not affected by allelopathic inhibition even while undesirable organisms are suppressed. Here we used two experiments to test how sensitivity to allelopathy varies across algae. In the first experiment, we tested the sensitivity of five biofuel candidate green algae strains to two allelopathic compounds (i.e., free fatty acids) and found that the degree of inhibition depends strongly on both the species and specific compound. In the second experiment, we exposed one alga (Chlorella) to the sterile-filtered medium of each species, and found that the concentration of free fatty acids released into the media predicted Chlorella’s growth response. This provides a better understanding of how the production of, and sensitivity to, allelopathic compounds determines algal productivity.

09 BIOMASS FUELS↗

Effects of carbon and silicon nanotubes and carbon nanofibers on marine microalgae Heterosigma akashiwo

Highlights: • Carbon and silicon nanotubes did not inhibit algal growth up to 10 mg/l. • Carbon nanofibers did not inhibit algal growth at 100 mg/l. • Cell death of marine alga Heterosigma akashiwo was associated with mechanical damage. • Nickel impurities in carbon nanofibers caused irregular shape formation. The effect of carbon and silicon nanotubes (CNTs and SiNTs) and carbon nanofibers (CNFs) to microscopic marine algae Heterosigma akashiwo was studied, using algal growth inhibition for 3 days (acute effect) and 7 days (chronic effect) as toxicity endpoints. The criterion of the toxic effect was the statistically significant reduction of the number of algal cells in the exposed samples compared to the control. Samples did not demonstrate toxic effects at doses 1 mg/l and 10 mg/l. CNTs and SiNTs samples at 100 mg/l exhibited both acute and chronic toxic effects. We assume that the main cause of cell death in these samples was related to the mechanical damage of cell integrity. CNFs at concentrations of 100 mg/l did not inhibit algal growth, but cells with irregular shapes were observed, which were not observed after exposure to CNTs and SiNTs. Nickel impurities present in CNFs samples are presumably the main cause of observed cell deformations.

54 ENVIRONMENTAL SCIENCES↗

High resolution FT-ICR mass spectral analysis of bio-oil and residual water soluble organics produced by hydrothermal liquefaction of the marine microalga Nannochloropsis salina

We report a detailed compositional characterization of a bio-crude oil and aqueous by-product from hydrothermal liquefaction of Nannochloropsis salina by direct infusion Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) in both positive- and negative-ionization modes. The FT-ICR MS instrumentation approach facilitates direct assignment of elemental composition to >7000 resolved mass spectral peaks and three-dimensional mass spectral images for individual heteroatom classes highlight compositional diversity of the two samples and provide a baseline description of these materials. Aromatic nitrogen compounds and free fatty acids are predominant species observed in both the bio-oil and aqueous fraction. Residual organic compounds present in the aqueous fraction show distributions that are slightly lower in both molecular ring and/or double bond value and carbon number relative to those found in the bio-oil, albeit with a high degree of commonality between the two compositions.

algae↗

FT-ICR MS analysis of blended pine-microalgae feedstock HTL biocrudes

Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) is utilized for direct comparison of the chemical composition of biocrudes generated from the hydrothermal liquefaction of 100% pine, 100% algae, 75:25 pine:algae, and 50:50 pine:algae feedstocks. This analysis reveals that the of the 72:25 and 50:50 pine:algal HTL biocrudes is essentially a composite of the two parent feeds (i.e., pine and algae) with a lower relative abundance of Ox species and a higher relative abundance of nitrogen-containing species than the pine HTL biocrude. Alternatively, the biocrude blends have a lower relative abundance of nitrogen-containing species where N>2 than the algal HTL biocrude. The 75:25 pine:algal HTL biocrude has more elemental formulae in common with the pine HTL biocrude than the 50:50 blend; however, both blends have more elemental formulae in common with the algal HTL biocrude. Interestingly, >20% of the elemental formulae assigned to monoisotopic peaks within the 75:25 and 50:50 biocrude blends are species not present in either the pine or algal HTL biocrudes. The highest relative abundance of these new species belong to the N2O4-6 classes, which correspond to heteroatom classes with a moderate number of nitrogen atoms and higher number of oxygen atoms per molecules than the species within the pure algal HTL biocrude. Compositionally, the novel species have the same structural motif but are of higher DBE and carbon numbers than the species within the algal HTL biocrude. These original species are most likely generated from reactions between molecules from both feeds, which results in compounds wotj higher oxygen content than typically seen in the algal HTL biocrude but also higher nitrogen contents than observed in the pine HTL biocrude.

FT-ICR↗

Effects of system design and Co-product treatment strategies on the life cycle performance of biofuels from microalgae

This study presents a life cycle greenhouse gas and energy assessment for two algal biofuel production pathways: biodiesel produced through lipid extraction (LE) and renewable diesel produced through hydrothermal liquefaction (HTL). The two production pathways generate different co-products, which are handled through allocation in life cycle assessment-based analyses. The method and assumptions used for co-product allocation affect the performance of the analyzed fuels, and are thus examined through scenario analysis; five co-product allocation strategies are tested for the LE pathway and six are tested for the HTL pathway. After allocation, the carbon intensity of renewable diesel varies from 36 to 54 gCO 2 e/MJ, and the primary energy consumption of renewable diesel varies from 0.7 to 1.2 MJ/MJ; while the carbon intensity of biodiesel ranges, remarkably, from -59 to 125 gCO 2 e/MJ, and the primary energy consumption of biodiesel ranges from 0.1 to 1.7 MJ/MJ. The optimal algal oil production pathway is determined by comparing open-loop and closed-loop systems, considering not only the estimated net environmental impacts, but also the confidence or uncertainty of those outcomes.

09 BIOMASS FUELS↗

Effects of the microalgae Chlamydomonas on gastrointestinal health

The effects of consuming whole-cell biomass of the green algae Chlamydomonas reinhardtii on gastrointestinal health in mice and humans was examined. A 14-day murine model of acute colitis revealed significantly less weight loss in mice that received C. reinhardtii biomass by oral gavage. Based on this result, human volunteers with varying gastrointestinal symptoms were asked to consume 1 or 3 g of C. reinhardtii daily for 30 days. Participants reported changes in their gastrointestinal health through a questionnaire and provided stool samples to analyze the composition of their gut microbiome. Those who typically experience frequent gastrointestinal symptoms reported significantly less bowel discomfort or diarrhea, significantly less gas or bloating, more regular bowel movements, and better stool consistency when regularly consuming C. reinhardtii. Analysis of participant stool samples suggested the gut microbiome composition in all groups remained complex, and no signs of dysbiosis or adverse effect on microbial composition were observed.

60 APPLIED LIFE SCIENCES↗

Production of lipid and carbohydrate from microalgae without compromising biomass productivities: Role of Ca and Mg

We report the cultivation of Chlorella sorokiniana str. SLA-04 in media containing trace amounts of Ca and Mg. The differences in productivities of biomass, lipids and carbohydrates were assessed relative to cultures grown in standard media (BG-11) that contain approximately 8 × higher concentration of Ca and 30 × higher concentration of Mg. Culture performance in N-limited standard media was also investigated. In addition to growth and accumulation of storage products (lipid and carbohydrate), we measured the utilization of N, Ca and Mg and monitored changes in cell size and photosynthetic activity. Our results showed that limitation of Ca or Mg did not inhibit cell replication and culture growth. On the contrary, Ca-limited (Ca L ) cultures had ~30% higher biomass productivity relative to the control with excessive nutrients possibly due to improvement in cell wall flexibility and cell division. We also observed that Ca L and Mg-limited (Mg L ) cultures had nearly 3-fold higher lipid concentration (measured as fatty acid methyl ester) and 50% higher carbohydrate concentration than the nutrient excess control cultures. Simultaneous culture growth and lipid accumulation in Ca L and Mg L cultures suggest that de novo synthesis was the primary mechanism for lipid accumulation in Ca/Mg-limited media. Overall, our study demonstrates that micronutrient optimization, in addition to optimization of macronutrients, could significantly improve microalgal biorefinery yields.

09 BIOMASS FUELS↗