Search NASA⌕ Search

SEARCH · Search NASA

Results for “morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

What determines the morphological fractions in clusters of galaxies?

A reexamination of Dressler's (1980) sample of nearly 6000 galaxies in 55 clusters shows that the morphology-clustercentric radius relation is more fundamental than the morphology-local density relation. This conclusion is supported by improved correlations when the projected clustercentric radius is used as the independent parameter, and by a comparison of galaxies with the same normalized clustercentric radii by different values of the projected local density.

Whitmore, Bradley C.↗

The dependence on morphology of the gas content in galactic disks

The classification S0 was introduced by Hubble to serve as a description of galaxies whose morphological characteristics seemed to lie between the disk-dominated spirals and the spheroidal elliptical systems. Since then there has been extensive discussion as to whether this classification sequence is also an evolutionary sequence. Many studies have focussed on a particular feature such as the luminosity profile, the bulge-to-disk ratio, or the nature of the interstellar matter, but the question of the evolution remains contentious. Equally contentious is the question of the classification itself. For systems with well-developed disks there usually is no problem. Many spheroidal systems also are unambiguously classified as ellipticals in most catalogs. However, there are a number of early systems which have been reclassified following review using improved optical material. For example, Eder et al. (AJ, 102, 572, 1991) found that many of the S0 galaxies which are rich in neutral hydrogen have faint spiral features. The confusion about classification propagates into the discussion of the properties of early-type systems. Attempts to put the classification system on a quantitative basis have in general been unsuccessful. Recently Sandage (private communication) has reviewed the classification of early systems and has defined a set of sub-classes for these objects. The S0 galaxies are divided into three groups, depending on the prominence of the disk. There are six subdivisions of Sa galaxies, depending upon the relative prominence of knots and other arm-like characteristics. We have explored the total gas content in these objects to see if there is a dependence on the galaxy morphology, as denoted by these new subclasses.

Hogg, D. E.↗

Factors affecting the morphology of isocitrate lyase crystals

Isocitrate lyase crystals have been grown by the hanging drop vapor equilibration method in both 1-g and microgravity and by vapor equilibrium in small capillaries. The crystal morphologies obtained have ranged from dendritic to 'octagonal' prisms. Theoretical evaporation models have been applied to these growth regimes. The results of these analyses along with other experimental results, indicate the factors which must be controlled to produce good growth morphologies.

Demattei, Robert C.↗

Solidification and morphology of submarine lavas - A dependence on extrusion rate

The results of recent laboratory experiments with wax extruded beneath relatively cold water may be extrapolated to predict the surface morphology of submarine lavas as a function of the extrusion rate and melt viscosity. The experiments with solidifying wax indicated that the surface morphology was controlled by a single parameter, the ratio of the time taken for the surface to solidify, and a time scale for lateral flow. For submarine basalts a solution of the cooling problem (which is dominated by conduction in the lava but convective heat transfer in the water) and estimates of lava viscosities place this parameter within the empirically determined 'pillowing' regime over a wide range of extrusion rates. This results is consistent with the observation that pillow basalts are the most common products of submarine eruptions. Smoother surfaces corresponding to the various types of submarine sheet flows are predicted for sufficiently rapid extrusion of basaltic magma. Still higher eruption rates in regions of low topographic relief may produce submarine lava lakes. Minimum emplacement times can be calculated for submarine volcanic constructs of a single lava flow type.

Griffiths, Ross W.↗

The morphology of lava flows in planetary environments - Predictions from analog experiments

Computations are carried out of the rates of surface cooling and lateral flow of lavas extruded onto the surfaces of terrestrial planets and the outer planet satellites, and the likely flow morphologies predicted by extrapolation of the laboratory analog results are determined. Results of this approach are presented for the earth, Venus, Mars, the moon, and the silicate flows on Io. The experiments, which involved the spreading of a viscous liquid under gravity in the presence of a solidifying surface crust, revealed a set of four distinct surface morphologies.

Griffiths, Ross W.↗

The morphology and interaction with the interstellar medium of the planetary nebula IC 4593

We present a morphological study of the planetary nebula IC 4593, based on our observations in H-alpha, forbidden O III, and forbidden S II. From the H-alpha intensity map, we calculate densities and masses for constituent structures and for the nebula as a whole. We argue that the morphology of IC 4593 suggests that it is moving supersonically through the ISM, and that the ISM shock may be thermally unstable, oscillating between adiabatic and radiative (isothermal) shock conditions. Spectroscopic observations are necessary to further explore the nature of the interaction between IC 4593 and the ISM. An improved understanding of such interactions will greatly expand the potential use of planetary nebulae to probe the ISM.

Zucker, Daniel B.↗

High-resolution radio observations of the supernova remnant 3C 391 - Possible breakout morphology

We present radio observations of the bright compact SNR 3C 391 (G31.9+0.0) made with the VLA2 at 6 arcsec resolution. The remnant's morphology suggests expansion into a medium with a very strong density gradient. We interpret radio and X-ray morphologies as evidence for a breakout of the expanding material into a region of abruptly lower density. The CO survey of Sanders et al. (1986), though not fully sampled, shows the presence of molecular gas at the position of the remnant, with a radial velocity of 90-110 km/s similar to the highest velocity absorption features seen in H I toward 3C 391. This gas may thus be near the remnant, though direct evidence of interaction is lacking. More detailed CO observations, and searches for evidence of shocked molecular gas such as 2.12 micron emission from H2, might confirm or refute the tantalizing possibility that 3C 391 is interacting with an observable molecular cloud.

Reynolds, Stephen P.↗

The morphology of flare phenomena, magnetic fields, and electric currents in active regions. II - NOAA active region 5747 (1989 October)

The paper describes October 1989 observations in NOAA Active Region 5747 of the morphology of energetic electron precipitation and high-pressure coronal flare plasmas of three flares and their relation to the vector magnetic field and vertical electric currents. The H-alpha spectroheliograms were coaligned with the vector magnetograms using continuum images of sunspots, enabling positional accuracy of a few arcsec. It was found that, during the gradual phase, the regions of the H-alpha flare that show the effects of enhanced pressure in the overlying corona often encompass extrema of the vertical current density, consistent with earlier work showing a close relationship between H-alpha emission and line-of-sight currents. The data are also consistent with the overall morphology and evolution described by erupting-filament models such as those of Kopp and Pneuman (1976) and Sturrock (1989).

Leka, K. D.↗

On the relationship between tectonic plates and thermal mantle plume morphology

Models incorporating plate-like behavior, i.e., near uniform surface velocity and deformation concentrated at plate boundaries, into a convective system, heated by a mix of internal and basal heating and allowing for temperature dependent viscosity, were constructed and compared to similar models not possessing plate-like behavior. The simplified numerical models are used to explore how plate-like behavior in a convective system can effect the lower boundary layer from which thermal plumes form. A principal conclusion is that plate-like behavior can significantly increase the temperature drop across the lower thermal boundary layer. This temperature drop affects the morphology of plumes by determining the viscosity drop across the boundary layer. Model results suggest that plumes on planets possessing plate-like behavior, e.g., the Earth, may differ in morphologic type from plumes on planets not possessing plate-like behavior, e.g., Venus and Mars.

Lenardic, A.↗

Venus pancake dome formation: Morphologic effects of a cooling-induced variable viscosity during emplacement

The distinctive steep-sided 'pancake' domes discovered in the Magellan images of Venus have morphologies that suggest formation by a single continuous emplacement of a high viscosity magma. A resemblance of the venusian domes to much smaller terrestrial rhyolite and dacite volcanic domes has prompted some authors to suggest that the domes on Venus also have high silica compositions and thus, high viscosities. However, viscosity is a function of crystallinity as well as silica content in a magma, and thus increases as a result of magmatic cooling. To investigate the effect of a cooling-induced viscosity increase on dome morphology, we have modeled the domes as radial viscous gravity currents that cool during emplacement. Various aspects of the investigation are discussed.

Sakimoto, S. E. H.↗

A morphological filter for removing 'Cirrus-like' emission from far-infrared extragalactic IRAS fields

The presence of diffuse extended IR emission from the Galaxy in the form of the so called 'Galactic Cirrus' emission has hampered the exploration of the extragalactic sky at long IR wavelengths. We describe the development of a filter based on mathematical morphology which appears to be a promising approach to the problem of cirrus removal. The method of Greyscale Morphology was applied to a 100 micron IRAS image of the M81 group of galaxies. This is an extragalactic field which suffers from serious contamination from foreground Galactic 'cirrus'. Using a technique called 'sieving', it was found that the cirrus emission has a characteristic behavior which can be quantified in terms of an average spatial structure spectrum or growth function. This function was then used to attempt to remove 'cirrus' from the entire image. The result was a significant reduction of cirrus emission by an intensity factor of 15 compared with the original input image. The method appears to preserve extended emission in the spatially extended IR disks of M81 and M82 as well as distinguishing fainter galaxies within bright regions of galactic cirrus. The techniques may also be applicable to IR databases obtained with the Cosmic Background Explorer.

Appleton, P. N.↗

Convection and morphological stability during directional solidification

For growth of a vicinal face at constant velocity, the effect of anisotropic interface kinetics on morphological stability is calculated for a binary alloy. The dependence of the interface kinetic coefficient on crystallographic orientation is based on the motion and density of steps. Anisotropic kinetics give rise to traveling waves along the crystal-melt interface, and can lead to a significant enhancement of morphological stability. The stability enhancement increases as the orientation approaches a singular orientation and as the solidification velocity increases. Shear flows interact with the traveling waves and, depending on the direction of the flow, may either stabilize or destabilize the interface. Specific calculations are carried out for germanium-silicon alloys.

Coriell, Sam R.↗

Morphological changes in the NGC 6251 jet

The giant radio galaxy NGC 6251 is a particularly good object for observational tests of relativistic jet models. Due to its high declination and approximately 0.5 Jy radio nucleus, high-quality Very Long Baseline Interferometry (VLBI) images of the central regions of the source can be made with northern hemisphere arrays. In addition, the large-scale radio morphology strongly suggests that the radio axis lies close to the plane of the sky, so Doppler boosting should be less extreme than in the core-dominated superluminal sources. Earlier 18 cm VLBI observations of NGC 6251 revealed an unexpectedly large jet/counterjet brightness ratio and small transverse motion of a feature in the parsec-scale jet. These early results are difficult to reconcile with the simplest symmetric relativistic jet models. In this paper we present a third-epoch 18 cm VLBI image of the parsec-scale radio jet in NGC 6251, and compare jet morphology over a 5 year time span. The jet shows a minor brightness peak at nearly the same distance from the core as the '25 mas knot' seen in the first- and second-epoch VLBI images. This feature is much less pronounced in the third epoch, and a relatively bright, new knot has appeared approximately 12 mas from the core. If this new component had a constant brightness during the 5 years separating the first and third observing epochs, then it must have moved away from the core with an apparent speed of at least 1.2c (compared with an upper limit of 0.23c for motion of the 25 mas knot). However, we cannot yet rule out a local brightening of the inner jet in favor of a new moving component. We determine a lower limit for the jet/couterjet brightness ratio of 100:1 within 6 mas of the core. We also present a new Very Large Array (VLA) image of the kpc-scale jet with 3 sec resolution, made from data obtained during the VLBI observations. The rate of decrease in jet surface brightness from parsec to kiloparsec scales is similar to jets in known superluminal radio sources.

Jones, Dayton L.↗

Morphological characterization of selected balloon films and its effects on balloon performances

Morphological characterization of several polyethylene balloon films have been studied using various techniques. The objective is to determine, if any, differentiating structural or morphological features that can be related to the performance of these balloon film materials. The results of the study indicate that the films are composed of either linear low denstiy polyethylene (LLDPE) or low density polyethylene (LDPE). A selective examination of these data imply that films limited degree of branching and larger crystallites size (same % crystallinity) showed good mechanical properties that appear to correlate with their high level of success in balloon flights.

Said, Magdi A.↗

Morphology of galaxy mergers at intermediate redshift

Using a combination of numerical simulation and synthesized Hubble Space Telescope Wide Field Camera 2 (HST WFC2) images, we follow the detectability of morphological signatures of disk galaxy mergers at intermediate redshifts z = 0.4 and z = 1.0. Rapid evolution in the surface brightness of tidal tails makes their use as an interaction signature limited; long tidal tails will only be detectable relatively early in the encounter, before the galaxies actually merge. Violent relaxation rapidly smooths isophotal irregularities after the galaxies merge, leaving the very low surface brightness tidal debris surrounding the remnant as the only sign of peculiarity after a few hundred Myr. This debris becomes indistinguishable from the main body of the remnant after less than or approximately equal to 0.2 (z = 1.0) to 1 (z = 0.4) Gyr, leaving a morphologically normal elliptical galaxy behind. Using WFC1, all signatures become undetectable almost immediately once the galaxies merge, due to the aberrated Point Speed Function (PSF). We interpret these results in light of recent HST programs investigating the nature of starburst and E + A galaxies in moderate redshift clusters.

Mihos, J. Christopher↗

Northern hemisphere nitrous oxide morphology during the 1989 AASE and the 1991-1992 AASE 2 campaigns

Nitrous oxide vertical profiles and latitudinal distributions for the 1989 Airborne Antarctic Ozone Experiment (AASE) and 1992 AASE 2 northern polar winters are developed from the ATLAS N2O dataset, using both potential temperature and pressure as vertical coordinates. Morphologies show strong descent occuring poleward of the polar jet. The AASE 2 morphology shows a mid latitude 'surf zone', characterized by strong horizontal mixing, and a horizontal gradient south of 30 deg N due to the sub-tropical jet. These features are similar to those produced by two-dimensional photochemical models which include coupling between transport, radiation, and chemistry.

Podolske, James R.↗

Morphology classification of galaxies in CL 0939+4713 using a ground-based telescope image

Morphological classification is studied for galaxies in cluster CL 0939+4712 at z = 0.407 using simple photometric parameters obtained from a ground-based telescope image with seeing of 1-2 arcseconds full width at half maximim (FWHM). By ploting the galaxies in a plane of the concentration parameter versus mean surface brightness, we find a good correlation between the location on the plane and galaxy colors, which are known to correlate with morphological types from a recent Hubble Space Telescope (HST) study. Using the present method, we expect a success rate of classification into early and late types of about 70% or possibly more.

Fukugita, M.↗

Solutocapillary Convection Effects on Polymeric Membrane Morphology

Macro voids are undesirable large pores in membranes used for purification. They form when membranes are cast as thin films on a smooth surface by evaporating solvent (acetone) from a polymer solution. There are two un-tested hypotheses explaining the growth of macro voids. One states that diffusion of the non-solvent (water) is solely responsible, while the other states that solutocapillary convection is the primary cause of macro void growth. Solutocapillary convection is flow-caused by a concentration induced surface-tension gradient. Macrovoid growth in the former hypothesis is gravity independent, while in the latter it is opposed by gravity. To distinguish between these two hypotheses, experiments were designed to cast membranes in zero-gravity. A semi-automated apparatus was designed and built for casting membranes during the 20 secs of zero-g time available in parabolic aircraft flight such as NASA's KC-135. The phase changes were monitored optically, and membrane morphology was evaluated by scanning electron microscopy (SEM). These studies appear to be the first quantitative studies of membrane casting in micro-gravity which incorporate real-time data acquisition. Morphological studies of membranes cast at 0, 1, and 1.8 g revealed the presence of numerous, sparse and no macrovoids respectively. These results are consistent with the predictions of the solutocapillary hypothesis of macrovoid growth.

Krantz, William B.↗