Search NASA⌕ Search

SEARCH · Search NASA

Results for “nanoparticle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Ferro-ionic states and domains morphology in Hf x Zr 1–x O 2 nanoparticles

Unique polar properties of nanoscale hafnia-zirconia oxides (Hf x Zr 1–x O 2 ) are of great interest for condensed matter physics, nanophysics, and advanced applications. These properties are connected (at least partially) to the ionic–electronic and electrochemical phenomena at the surface, interfaces, and/or internal grain boundaries. Here, we calculated the phase diagrams, dielectric permittivity, spontaneous polar, and antipolar ordering, as well as the domain structure morphology in Hf x Zr 1–x O 2 nanoparticles covered by ionic–electronic charge originating from surface electrochemical adsorption. We revealed that the ferro-ionic coupling supports the polar long-range order in nanoscale Hf x Zr 1–x O 2 , induces, and/or enlarges the stability region of the labyrinthine domains toward smaller sizes and smaller environmental dielectric constant at low concentrations of the surface ions. The ferro-ionic coupling causes the transition to the single-domain ferro-ionic state at high concentrations of the surface ions. We predict that the labyrinthine domain states, being multiple-degenerated, may significantly affect the emergence of the negative differential capacitance state in the nanograined/nanocrystalline Hf x Zr 1–x O 2 films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Formation and optical properties of indium nanoparticle arrays for deep-UV plasmonics

We utilize a combined computational-experimental approach to examine the influence of indium nanoparticle (NP) array distributions on deep-ultraviolet (UV) plasmon resonances. For photon energies < 5.7 eV, analysis of ellipsometric spectra reveals an increase in silicon reflectance induced by indium NP arrays on silicon. For various energies in the range 5.7–7.0 eV, a decrease in reflectance is induced by the NP arrays. Similar trends in reflectance are predicted from finite-difference time-domain (FDTD) simulations using NP size distributions extracted from atomic-force micrographs as input. In addition, in the energy range of 7.4–9.2 eV, the FDTD simulations reveal reflectance minima, characteristic of localized surface plasmon resonances. Here, electron energy-loss spectroscopy collected from individual indium NPs reveals the presence of LSPR at ≈ 8 eV, further supporting the promise of indium NP arrays on silicon for deep-UV plasmonics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ion transport through reconfigurable nanoparticle-surfactant stabilized droplet interface bilayers

Despite their adaptability and mechanical stability, Pickering emulsions based on the interfacial assembly of colloidal particles have not found use in iontronics, since the dense interfacial packing of micron-sized particles precludes functional connectivity between two droplets. In this work, we introduce a chemically reconfigurable droplet interface bilayer (DIB) platform based on the interfacial assembly of nanoparticle-surfactants (NPSs) that enables spontaneous or field-induced formation of ion-conducting nanochannels, eliminating the need of ionophores or nanochannel-forming proteins. These nanoscopic channels emerge from packing defects in the jammed interfacial assemblies of the charged NPSs and support size and charge selective, hysteretic ion transport governed by interfacial electrostatics and dimensional constraints. The NPS-DIBs show short-term and long-term plasticity, hallmarks of neuromorphic behavior, that are mediated by the structural and chemical design of the bilayer. These assemblies establish a versatile, chemically tunable platform that couples soft-matter mechanics with interfacial ionic functionality, offering a robust foundation for soft iontronic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Generation of fast photoelectrons in strong-field emission from metal nanoparticles

We investigated the generation and control of fast photoelectrons (PEs) by exposing plasmonic nanoparticles (NPs) to short infrared (IR) laser pulses with peak intensities between 10 12 and 3 × 10 13 W/cm 2 . Our measured and numerically simulated PE momentum distributions demonstrate the extent to which PE yields and cutoff energies are controlled by the NP size, material, and laser peak intensity. For strong-field photoemission from spherical silver, gold, and platinum NPs with diameters between 10 and 100 nm our results confirm and surpass extremely high PEs cutoff energies, up to several hundred times the incident laser-pulse ponderomotive energy, found recently for gold nanospheres [Saydanzad et al., Nanophotonics 12, 1931 (2023)]. As reported previously for dielectric NPs [Rupp et al., J. Mod. Opt. 64, 995 (2017)], at higher intensities the cutoff energies we deduce from measured and simulated PE spectra tend to converge to a metal-independent limit. We expect these characteristics of light-induced electron emission from prototypical plasmonic metallic nanospheres to promote the understanding of the electronic dynamics in more complex plasmonic nanostructures and the design of nanoscale light-controlled plasmonic electron sources for photoelectronic devices of applied interest.

electron source↗
DOE OSTI2026

A Review of Polymeric Nanoparticle Design, Synthesis, and Biomedical Applications

Polymeric nanoparticles (PNPs) are solid particles that contain macromolecular polymers ranging in size from 1-1000 nm. They have a wide variety of structures that are determined by their identity as either natural biopolymers, synthetic polymers or a combination of both. In the design of PNPs, the polymeric system, size, internal structure, additional molecules, and synthetic pathway can be engineered, allowing for a multitude of properties including differing responses to physiological environments and the incorporation of a drug. The easily accessible fine tuning of PNPs allows for a multitude of applications in medicine. PNPs allow for increased pharmacokinetics, efficacy, safety, and targeting strength when utilized as carriers for drugs. Currently there are a wide range of PNPs approved by the Food and Drug Administration for use in clinical settings and many more being investigated in clinical studies. There is also research that is being conducted for the usage of PNPs in controlled drug delivery systems and as carriers through the blood brain barrier to aid in treating neurological diseases.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Gold Nanoparticle Mesoporous Carbon Composite as Catalyst for Hydrogen Evolution Reaction

Increased environmental pollution and the shortage of the current fossil fuel energy supply has increased the demand for eco-friendly energy sources. Hydrogen energy has become a potential solution due to its availability and green combustion byproduct. Hydrogen feedstock materials like sodium borohydride (NaBH 4 ) are promising sources of hydrogen; however, the rate at which the hydrogen is released during its reaction with water is slow and requires a stable catalyst. In this study, gold nanoparticles were deposited onto mesoporous carbon to form a nano-composite catalyst (AuNP-MCM), which was then characterized via transmission electron microscopy (TEM), powder X-ray diffraction (P-XRD), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). The composite’s catalytic ability in a hydrogen evolution reaction was tested under varying conditions, including NaBH 4 concentration, pH, and temperature, and it showed an activation of energy of 30.0 kJ mol -1 . It was determined that the optimal reaction conditions include high NaBH 4 concentrations, lower pH, and higher temperatures. This catalyst, with its stability and competitively low activation energy, makes it a promising material for hydrogen generation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2023

Colorimetric and Label-Free Optical Detection of Pb 2+ Ions via Colloidal Gold Nanoparticles

The detection of Lead (Pb) heavy metal in water is crucial in many chemical processes as it is associated with serious health hazard. Here, we report the selective and precise colorimetric detection of Pb 2+ ions in water exploiting the mechanisms of aggregation and self-assembly of Glutathione (GSH) functionalized gold nanoparticles (GNPs). The carboxyl functional groups are available to create coordination complexes with Pb 2+ inducing aggregation amongst the GSH-GNPs in the presence of Pb 2+ due to the chelation of the GSH ligands. The resulting aggregation of amongst the GSHGNPs in the presence of Pb2+ increases the aggregate size depending on available Pb 2+ ions affecting the plasmonic coupling. This causes in a substantial shift in the plasmon wavelength to a longer wavelength side with increasing Pb 2+ concentration, resulting in a red-to-blue colorimetric or visual change, enabling instant determination of lead content in water.

calorimetric detection↗
DOE OSTI2024

Low Thermal Conductivity and Diffusivity at High Temperatures Using Stable High–Entropy Spinel Oxide Nanoparticles

The realization of low thermal conductivity at high temperatures (0.11 W m –1 K –1 800 °C) in ambient air in a porous solid thermal insulation material, using stable packed nanoparticles of high-entropy spinel oxide with 8 cations (HESO-8 NPs) with a relatively high packing density of ≈50%, is reported. The high-density HESO-8 NP pellets possess around 1000-fold lower thermal diffusivity than that of air, resulting in much slower heat propagation when subjected to a transient heat flux. The low thermal conductivity and diffusivity are realized by suppressing all three modes of heat transfer, namely solid conduction, gas conduction, and thermal radiation, via stable nanoconstriction and infrared-absorbing nature of the HESO-8 NPs, which are enabled by remarkable microstructural stability against coarsening at high temperatures due to the high entropy. Furthermore, this work can elucidate the design of the next-generation high-temperature thermal insulation materials using high-entropy ceramic nanostructures.

thermal insulation↗
DOE OSTI2025

Facet‐dependent Heterogeneous Fenton Reaction Mechanisms on Hematite Nanoparticles for (Photo)catalytic Degradation of Organic Dyes

Although heterogeneous photo‐Fenton reactions on nanoparticulate iron oxides effectively degrade organic pollutants, the underlying surface mechanisms remain debated. Here, we demonstrate how these pathways are modulated by specific hematite crystal facets. To investigate the influence of particle surface structure, methylene blue (MB) adsorption and photodegradation kinetics are examined using facet‐engineered hematite nanoparticles with distinct exposed facets. The results reveal that MB photodegradation strongly depends on both pH and facet orientation. When normalized by surface area, (116) facet shows higher photodegradation activity than those with (104) or (001) facets. This enhanced activity is attributed to favorable electronic structure and surface characteristics, including a smaller optical bandgap, faster charge transfer, and superior H 2 O 2 decomposition. In contrast, the photodegradation capacity follows (104) 〉 (116) 〉 (001), primarily due to the higher density of surface‐active sites on the (104) facet. These sites promote coupled MB adsorption and degradation, enabling removal of a greater overall quantity of MB. Additionally, under high pH conditions, hematite can degrade MB in the dark, with capacities following (001) ≫ (116) 〉 (104). These findings underscore the critical catalytic role of specific hematite surfaces and advance the understanding of facet‐dependent photoinduced redox chemistry at mineral–water interfaces.

(photo)catalytic degradation↗
DOE OSTI2024

Advancing Insights into Electrochemical Pre‐Treatments of Supported Nanoparticle Electrocatalysts by Combining a Design of Experiments Strategy with In Situ Characterization

Activation, break-in, and/or pre-treatment protocols are generally applied to energy conversion devices before regular operation to reach stable performance. There remains much to understand about the relationships among physical properties, performance, and electrochemical pre-treatments. Here, a design-of-experiments (DoE) strategy is employed to address this gap by demonstrating the influence of five pre-treatment parameters for carbon-supported Pt-nanoparticle catalysts on the electrocatalytic oxygen reduction reaction (ORR). A subset of pre-treatments, developed using a central composite design, are tested in a flow cell combined with an inductively-coupled plasma mass spectrometer (on-line ICP-MS). The DoE-based approach facilitates comprehensive insights from two orders of magnitude fewer experiments than a conventional grid search. The coupled on-line ICP-MS setup enables effective catalysis and real-time catalyst dissolution data. Leveraging insights from DoE for on-line ICP-MS and additional characterization, a model is built between the degradation of a multi-dimensional supported Pt surface, its performance, and applied electrochemical parameters. These investigations identify surface modifications, such as oxidation, and subsequent restructuring of Pt during pre-treatment as a primary cause of performance deterioration during ORR. By combining DoE with advanced characterization techniques, a powerful approach is demonstrated to gain a mechanistic understanding of pre-treatment protocols that can be broadly adapted to various reaction chemistries.

Platinum↗
DOE OSTI2025

A Rapid, Sustainable, One‐step Mechanochemical Strategy for Synthesizing Gold Nanoparticle‐Doped Covalent Organic Frameworks

Doping gold nanoparticles within covalent organic frameworks (AuNPs@COFs) has garnered enormous momentum due to their unique properties and broad applications. Nevertheless, prevailing multi-step synthesis is plagued with low time efficiency, eco-unfriendliness, and tedious protocols. Herein, we introduce a rapid, sustainable, scalable, one-step mechanochemical strategy for synthesizing up to four AuNPs-doped COFs via steel ball milling within an hour under ambient conditions. This approach overcomes the synthetic barriers of conventional multi-step solution-based methods, such as extended reaction times (5 days), milligram scale, the use of toxic solvents, elevated temperatures, and reliance on external reducing agents. One exemplary AuNPs@COF (AuNPs@DMTP-TPB) exhibits high crystallinity, porosity, small AuNP size, and uniform dispersion (5.4±0.6 nm), surpassing its counterpart synthesized via multi-step solution-based methods (6.4±1.1 nm). Notably, the gram-scale synthesis of AuNPs@DMTP-TPB can be successfully achieved. Control experiments suggest that the in situ formation of AuNPs is attributed to the galvanic reduction of gold precursor by stainless steel apparatus. As a proof-of-concept catalytic application, AuNPs@DMTP-TPB demonstrates remarkable catalytic activity and recyclability for the aqueous reduction of 4-nitrophenol under ambient conditions. This study provides an environmentally benign and fast pathway to synthesize AuNPs@COFs via mechanochemistry for the first time, opening tremendous possibilities for heterogeneous catalysis and beyond.

Nailwal, Yogendra↗
DOE OSTI2025

Millisecond Phase Transition Kinetics of Lyotropic Liquid Crystalline Nanoparticles Observed by Time‐Resolved Small Angle X‐ray Solution Scattering

This study investigates the dynamic behavior of lyotropic liquid crystal nanoparticles (LCNPs), which are widely recognized for their applications in drug delivery. By employing nanosecond near‐infrared laser pulse‐induced temperature jump (T‐jump) and time‐resolved X‐ray solution scattering, the structural dynamics of phase transitions in phytantriol‐based cubosomes and hexosomes are revealed. Both cubosome and hexosome LCNPs undergo phase transitions into noncrystalline phases at high temperatures. Their phase transition kinetics, occurring within milliseconds (ms) and involving one intermediate structure, are captured. Additionally, the reverse self‐assembly processes of LCNPs were observed, occurring on the timescale of a few hundred ms. To our knowledge, this is the first observation of LCNP T‐jump induced phase transitions on the ms timescale and their reverse self‐assembly. These findings provide valuable insights into the LCNP phase transition processes, with potential implications for drug delivery applications.

Chemistry↗
DOE OSTI2024

Polymer Single‐Chain Nanoparticles: Shaping Solid Surfactants

Polymer single-chain nanoparticles (SCNPs) have found a wide range of applications spanning catalysts, sensors and nanomedicine. The generation of structured SCNPs from star-shaped polymers with diverse architectures and functionalities affords a new avenue to expand the emerging research area. The large-scale synthesis of structured SCNPs is described by the electrostatics-mediated intramolecular crosslinking of three types of 3-armed star-shaped polymers (T-P4VP, T-PS-b-P4VP, and T-P4VP-b-PS), whose configuration is tunable from spherical to cage-shaped to dumbbell-shaped and star-shaped. The structured SCNPs are amphiphilic and can be used as solid surfactants to stabilize different types of emulsions.

Li, Shuailong↗
DOE OSTI2024

Machine Learning Discrimination and Ultrasensitive Detection of Fentanyl Using Gold Nanoparticle-Decorated Carbon Nanotube-Based Field-Effect Transistor Sensors

The opioid overdose crisis is a global health challenge. Fentanyl, an exceedingly potent synthetic opioid, has emerged as a leading contributor to the surge in opioid-related overdose deaths. The surge in overdose fatalities, particularly due to illicitly manufactured fentanyl and its contamination of street drugs, emphasizes the urgency for drug-testing technologies that can quickly and accurately identify fentanyl from other drugs and quantify trace amounts of fentanyl. In this paper, gold nanoparticle (AuNP)-decorated single-walled carbon nanotube (SWCNT)-based field-effect transistors (FETs) are utilized for machine learning-assisted identification of fentanyl from codeine, hydrocodone, and morphine. The unique sensing performance of fentanyl led to use machine learning approaches for accurate identification of fentanyl. Employing linear discriminant analysis (LDA) with a leave-one-out cross-validation approach, a validation accuracy of 91.2% is achieved. Meanwhile, density functional theory (DFT) calculations reveal the factors that contributed to the enhanced sensitivity of the Au-SWCNT FET sensor toward fentanyl as well as the underlying sensing mechanism. Finally, fentanyl antibodies are introduced to the Au-SWCNT FET sensor as specific receptors, expanding the linear range of the sensor in the lower concentration range, and enabling ultrasensitive detection of fentanyl with a limit of detection at 10.8 fg mL –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Transformation of CuI Nanoparticles Into Oxidation‐Resistant 2D Copper Nanoplates

Unconventional phase transformations reveal new crystallization mechanisms, yet direct observation of such pathways during nanoscale solution-phase synthesis remains challenging. This study uncovers an atypical growth process in which thermodynamically stable CuI nanoparticles (NPs) transform into high-energy 2D Cu plates. Using a combination of in situ transmission electron microscopy, ex situ structural analysis, and density functional theory calculations shows that the formation of structural defects induced by hexadecylamine and chloride ions facilitates the transformation by promoting surface iodine vacancies. The resulting Cu{111} nanoplates, with ultrathin thicknesses (≈4 nm) and exceptionally high aspect ratios (≈450), display enhanced oxidation resistance and long-term stability under ambient conditions. This resistance is attributed to the close-packed {111} facets, which suppress chemical oxidation even after extended exposure to air over 100 days. These findings provide new insights into non-classical crystallization pathways in metal nanomaterials and suggest a versatile approach for preparing oxidation-resistant, structurally defined Cu nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The atomic-level structure and stability of interfaces of Pt nanoparticles in alumina: An experimental and computational evaluation

The atomic-level structure of interfaces between Pt and a transition form of Al2O3 were studied using a combination of electron microscopy and first principles calculations. A model system of Pt nanoprecipitates in Al2O3 were formed in sapphire wafers via high-energy ion implantation of Pt followed by thermal annealing at 1000 °C in air. The Pt nanoparticles took the form of tetrahedra and truncated tetrahedra primarily bound by {111}Pt facets. The high prevalence of these facets motivated the development of density functional theory (DFT) based models of (111)Pt interfaces with six different chemical terminations of ( 2 ¯ 01 ) θ-alumina. The atomic-level structure of the Pt/Al2O3 interfaces was characterized with aberration-corrected scanning transmission electron microscopy (STEM) and the experimental images were compared to STEM image simulations of the DFT models. The model interface with Pt bonded to oxygen-terminated θ-Al2O3, with the Pt located on top of the O and with an underlying layer of octahedral Al, provided the best match to the experimental images. This interfacial termination is also the most stable for the thermal annealing conditions used based on thermodynamic calculations of the interfacial energy as a function of temperature and oxygen partial pressure. This experimentally verified model provides a basis for improving models of Pt/γ-alumina interfaces.

Clauser, A L↗
DOE OSTI2025

Tailoring Cu-Zr gradient nanoglass structures: Influence of nanoparticle size and cooling rates on glass-glass interfaces

The study of gradient nanoglasses (GNGs) has gained attention due to their unique mechanical properties and potential applications in advanced materials. This study employs molecular dynamics simulations to synthesize a GNG using Cu-Zr metallic glass nanoparticles (NPs) sized from 3 to 15 nm. The NPs were produced by melting and quenching metallic clusters at a relatively slow quench rate of 10 9 K/s. The synthesis of GNG is elucidated along with the characterization of its heterogeneous metallic glass nanostructure. A seamless GNG structure is formed through cold compression of Cu 64 Zr 36 amorphous NPs of varying sizes. The influence of NP size on the GNG structure is investigated, utilizing deeply relaxed NPs, which exhibit a characteristic Cu segregation pattern on their surfaces. The results highlight an increase in structural heterogeneity due to heterogeneous mass transport and the development of local composition and density variations caused by Cu segregation at glass-glass interfaces (GGIs). A reduction in NP size is correlated with decreased Cu atomic displacements and local density at GGIs, suggesting that larger NPs may produce stronger GGIs. This research presents a novel methodology for synthesizing heterogeneous metallic glasses, demonstrating the capacity to control and customize nanostructure heterogeneity through the manipulation of NP sizes and cooling rates. Furthermore, these findings enhance our understanding of structural evolution during nanoglass synthesis and lay the foundation for further exploration in nanomaterial synthesis and characterization.

36 MATERIALS SCIENCE↗