Search NASA⌕ Search

SEARCH · Search NASA

Results for “negative capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

241 records · Page 14

Langmuir probe diagnostics of electron energy distributions with optical emission spectroscopy in capacitively coupled rf discharge in nitrogen

Measurements with a rf compensated Langmuir probe and optical emission spectroscopy are carried out in capacitively coupled rf (13.56 MHz) pure nitrogen N{sub 2} discharges at fixed rf voltage over a wide range of pressure, 30 to 400 mTorr. The electron energy probability function (EEPF) measured below 100 mTorr resembles a bi-Maxwellian-type distribution. At pressure range of 100-200 mTorr, the EEPF has non-Maxwellian distribution with a ''dip'' near 4.5 eV. At the highest pressure of 400 mTorr, the EEPF evolves into a Druyvestein-like distribution and the ''dip'' disappears. The electron density significantly decreases with increase in the N{sub 2} pressure. On the other hand, the electron temperatures gradually decrease with an increase in N{sub 2} pressure, reaching minimum at 150 mTorr, beyond which it abruptly increases. Such evolution of the EEPFs shape with gas pressure has been discussed in terms of non-local electron kinetics and heating mode transition. The emission intensities of nitrogen (0-0) band of second positive system at 337.1 nm and (0-0) band of first negative systems at 391.4 nm are used to determine the dependence of their radiative states N{sub 2}(C{sup 3}{Pi}{sub u}) and N{sub 2}{sup +}(B{sup 2}{Sigma}{sub u}{sup +}) with nitrogen pressure. It is observed that the pressure influences the radiative states differently owing to their different populating mechanisms. The vibrational temperature T{sub {nu}ib} and rotational temperature T{sub rot} are measured for the sequence ({Delta}{nu}=-2) of N{sub 2} second positive system (C{sup 3}{Pi}{yields}B{sup 3}{Pi}{sub g}) using the method of comparing the measured and calculated spectra with a chi-squared minimization procedure. It was found that both T{sub {nu}ib} and T{sub rot} have similar dependences with N{sub 2} pressure; peaked at 100 mTorr beyond which it monotonically decreases with increase in the N{sub 2} pressure. The correlation between the observed maximum value of T{sub {nu}ib} around 100 mTorr and the detected ''dip'' in the EEPF in the same pressure range has been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Complementary Paired G4FETs as Voltage-Controlled NDR Device

It is possible to synthesize a voltage-controlled negative-differential-resistance (NDR) device or circuit by use of a pair of complementary G4FETs (four-gate field-effect transistors). [For more information about G4FETs, please see the immediately preceding article]. As shown in Figure 1, the present voltage-controlled NDR device or circuit is an updated version of a prior NDR device or circuit, known as a lambda diode, that contains a pair of complementary junction field-effect transistors (JFETs). (The lambda diode is so named because its current-versus- voltage plot bears some resemblance to an upper-case lambda.) The present version can be derived from the prior version by substituting G4FETs for the JFETs and connecting both JFET gates of each G4FET together. The front gate terminals of the G4FETs constitute additional terminals (that is, terminals not available in the older JFET version) to which one can apply control voltages VN and VP. Circuits in which NDR devices have been used include (1) Schmitt triggers and (2) oscillators containing inductance/ capacitance (LC) resonant circuits. Figure 2 depicts such circuits containing G4FET NDR devices like that of Figure 1. In the Schmitt trigger shown here, the G4FET NDR is loaded with an ordinary inversion-mode, p-channel, metal oxide/semiconductor field-effect transistor (inversion-mode PMOSFET), the VN terminal of the G4FET NDR device is used as an input terminal, and the input terminals of the PMOSFET and the G4FET NDR device are connected. VP can be used as an extra control voltage (that is, a control voltage not available in a typical prior Schmitt trigger) for adjusting the pinch-off voltage of the p-channel G4FET and thereby adjusting the trigger-voltage window. In the oscillator, a G4FET NDR device is loaded with a conventional LC tank circuit. As in other LC NDR oscillators, oscillation occurs because the NDR counteracts the resistance in the tank circuit. The advantage of this G4FET-NDR LC oscillator over a conventional LC NDR oscillator is that one can apply a time-varying signal to one of the extra control input terminals (VN or VP) to modulate the conductance of the NDR device and thereby amplitude-modulate the output signal.

Mojarradi, Mohammad↗

Remote Sensing and Quantization of Analog Sensors

This method enables sensing and quantization of analog strain gauges. By manufacturing a piezoelectric sensor stack in parallel (physical) with a piezoelectric actuator stack, the capacitance of the sensor stack varies in exact proportion to the exertion applied by the actuator stack. This, in turn, varies the output frequency of the local sensor oscillator. The output, F(sub out), is fed to a phase detector, which is driven by a stable reference, F(sub ref). The output of the phase detector is a square waveform, D(sub out), whose duty cycle, t(sub W), varies in exact proportion according to whether F(sub out) is higher or lower than F(sub ref). In this design, should F(sub out) be precisely equal to F(sub ref), then the waveform has an exact 50/50 duty cycle. The waveform, D(sub out), is of generally very low frequency suitable for safe transmission over long distances without corruption. The active portion of the waveform, t(sub W), gates a remotely located counter, which is driven by a stable oscillator (source) of such frequency as to give sufficient digitization of t(sub W) to the resolution required by the application. The advantage to this scheme is that it negates the most-common, present method of sending either very low level signals (viz. direct output from the sensors) across great distances (anything over one-half meter) or the need to transmit widely varying higher frequencies over significant distances thereby eliminating interference [both in terms of beat frequency generation and in-situ EMI (electromagnetic interference)] caused by ineffective shielding. It also results in a significant reduction in shielding mass.

Strauss, Karl F.↗

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO 2 dielectric (70 nm), on which was placed the active layer of 2–4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol –1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBE CO of 20 ± 1 kJ mol –1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBE CO of 14 ± 1 kJ mol –1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Inorganic carbon compounds↗

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O{sub 2} Plasma

Low pressure capacitively coupled plasmas are extensively used for advanced microelectronic device fabrication. Due to long electron mean free path and large bias voltages in this regime, kinetic effects play an important role in the dynamics of low pressure discharges. To take account of the kinetic effects, a one-dimensional hybrid plasma model has been developed that couples the Particle-In-Cell (PIC) technique for charged species and a fluid method for neutral species. The PIC model uses the Monte Carlo Collision (MCC) method to account for collision processes. The fluid model for neutral species takes into account species transport in the plasma, chemical reactions, and surface processes. An electronegative O{sub 2} plasma is simulated for a range of pressures (10-300 mTorr) and rf voltages (200-600 V) at 60 MHz. Our model for the O{sub 2} plasma considers electrons, O{sub 2}{sup +}, O{sup -}, O, and O*. The reaction mechanism includes electron impact dissociation, ionization, dissociative attachment and ion-ion recombination. Computational results are compared to our previous simulations for an electropositive Ar discharge. The electrons primarily absorb power from the external power supply at the sheath edge during sheath expansion. Energetic beam electrons are generated at the sheath edge during electron heating, which are responsible for plasma production and sustenance through collisions. The negative ions are found to be confined in the bulk plasma due to the potential well. The ratio of negative ions to electrons increases with increase in pressure and decrease in rf voltage. The spatial profiles of charged and neutral species in the plasma are found to primarily depend on species sources due to collisional processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy distribution of electron flux at electrodes in a low pressure capacitively coupled plasma

A one-dimensional particle-in-cell (PIC) model is used to examine the energy distribution of electron flux at electrodes [labeled g{sub e}({epsilon},t), where {epsilon} is energy and t is time] in a low pressure 60 MHz capacitively coupled Ar discharge. The effect of gas pressure and an auxiliary DC voltage on g{sub e}({epsilon},t) is also investigated. It is found that the electrons only leave the plasma for a short time period during the radio-frequency (RF) cycle when the sheath collapses at the electrode. Furthermore, majority of the exiting electrons have energies below 10 eV with a distribution g{sub e}({epsilon},t) that is narrow in both energy and time. At relatively high pressures ({>=}4.67 Pa for the conditions considered), the relationship between the time-average distribution g{sub e}({epsilon}) and electron temperature in the plasma (T{sub e}) can be easily established. Below 4.67 Pa, kinetic effects become important, making it difficult to interpret g{sub e}({epsilon}) in terms of T{sub e}. At low pressures, g{sub e}({epsilon},t) is found to broaden in both energy and time except for a narrow pressure range around 1.2 Pa where the distribution narrows temporally. These low pressure kinetic phenomena are observed when the electrons can be accelerated by expanding sheaths to speeds that allow them to traverse the inter-electrode distance quickly (<1.5 RF cycles for conditions considered) and when electrons undergo few collisions during this excursion. The mean energy of exiting electrons increases with decreasing gas pressure, especially below 1.0 Pa, due to higher T{sub e} and secondary electrons retaining a larger fraction of the energy they gained during initial sheath acceleration. For the relatively small DC voltages examined ( Double-Vertical-Line V{sub dc} Double-Vertical-Line /V{sub rf} {<=} 0.15), the application of a negative DC voltage on an electrode decreases the electron flux there but has a weak impact on the g{sub e} profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrochemical mechanisms of leakage‐current in photovoltaic modules

Abstract This paper analyzes the mechanisms and pathways for leakage current flow observed in Si photovoltaic modules subjected to high temperature and humidity and a large voltage bias with respect to ground. The current inside of the frame is in the form of electron motion, but in the glass and polymer, it is in at least a large part attributable to the movement of ions. When the mode of current flow changes from electronic to ionic conduction, electrochemical reactions will take place at the interface. This can include reactions that produce volatile chemical species like H 2 , CO x , and O 2 , along with ionic species such as OH − and H 3 O + . Here, we see evidence of the importance of different charge carriers with different diffusion rates and the influence of electrochemical processes involved. The application of negative voltage to the cell circuit affects the resistivity of glass producing surfaces with poor conductivity but with some increases in the electrochemical potential producing complicated interactions that are important when the voltage is changed. In the polymer, there is the development of a space charge region and a chemical gradient providing two oppositional forces to current flow, which when released create a complicated discharge process. Here, we give a basic understanding of the charge/discharge of PV cells highlighting how the specific mechanisms are important in understanding some of the degradation processes in PV modules. We find that there is evidence of multiple significant charge carrier species with different diffusion time scales. The glass/polymer interface forms a depleted region of higher resistance after prolonged exposure to current. Charge also builds up at the polymer to cell antireflective coating interface and mostly flows to the gridlines to experience electrochemical reactions. These complexities result in non‐linear behavior where the apparent resistivities of the different layers change during charge/discharging processes, making the modeling of the current flow extremely difficult.

14 SOLAR ENERGY↗