Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical weather forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Lidar-Based Evaluation of HRRR Performance in California’s Diablo Range

The performance of the NOAA High-Resolution Rapid Refresh (HRRR) model for capturing low-level winds near a wind energy production site during summer 2019 is evaluated. This study catalogs the ability of HRRR to predict boundary layer dynamics relevant to wind energy interests over complex terrain, which has presented challenges for weather and energy forecasting. Performance is evaluated by comparing HRRR output to wind-profiling Doppler lidars at Lawrence Livermore National Laboratory Site 300. HRRR captured the diurnal profile of horizontal winds in the observed 150-m layer, despite strong underpredictions (∼4 m s −1 ) during evening and nighttime hours. These underpredictions may be a result of local speedup flows observed by the lidars, which were unresolved in HRRR due to their small spatial extent. HRRR bias magnitude relative to observations was found to be minimal during days with synoptic-scale troughs and strong 850-hPa geopotential gradients, while bias magnitude was maximal during days with synoptic ridging and weak 850-hPa geopotential gradients. To translate wind speed predictions to energy forecasting, generic turbine models were used to estimate power generation for turbines characteristic of the nearby Altamont Pass Wind Resource Area. Results show that HRRR-based energy estimates predicted daytime power generation adequately relative to lidar-based estimates with an 18-h lead time (bias magnitude < 0.4 MW from 0900 to 1400 LT) but overpredicted power during the rest of the diurnal cycle (bias > 1 MW). These results demonstrate conditions under which HRRR performs well for wind energy applications in complex terrain, while highlighting biases that require further investigation to support usage of a high-resolution model for wind energy forecasts.

Boundary layer↗

The Amazon and La Plata River Basins as Moisture Sources of South America: Climatology and Intraseasonal Variability

Abstract Land‐atmosphere interactions are critical for precipitation (PPT) over South America where terrestrial evapotranspiration (ET) constitutes a significant fraction of moisture for rainfall over the ecologically and socio‐economically vital Amazon (AMZ) and La Plata (LPB) river basins. We quantify the contribution of ET from AMZ and LPB to PPT over the continent with a focus on the intraseasonal time scale. Using numerical water tracers embedded in the Weather Research and Forecasting model we track the moisture originating from the two basins. Our findings indicate that approximately 40% of annual rainfall over the eastern foothills of the Andes originates as AMZ ET, and nearly 30% of rainfall over northern Argentina originates as LPB ET. Analysis of moisture transport during both phases of the dominant intraseasonal oscillation pattern over South America reveals an intraseasonal “sloshing” of LPB moisture between the South Atlantic convergence zone (SACZ) and southeastern South America (SESA) regions. AMZ and LPB each supply approximately 6% of moisture for SACZ PPT during periods of intraseasonal enhancement (positive anomalies), highlighting the importance of moisture from the Atlantic Ocean. For the SESA region, LPB supplies 26% of the moisture for PPT during periods of intraseasonal enhancement while AMZ supplies 5%.

54 ENVIRONMENTAL SCIENCES↗

How Generalizable is a Machine-Learning Approach for Modeling Hub-Height Turbulence Intensity?

Hub-height turbulence intensity is essential for a variety of wind energy applications. However, simulating it is a challenging task. Simple analytical models have been proposed in the literature, but they all come with significant limitations. Even state-of-the-art numerical weather prediction models, such as the Weather Research and Forecasting model, currently struggle to predict hub-height turbulence intensity. Here, we propose a machine-learning-based approach to predict hub-height turbulence intensity from other hub-height and ground-level atmospheric measurements, using observations from the Perdigao field campaign and the Southern Great Plains atmospheric observatory. We consider a random forest regression model, which we validate first at the site used for training and then under a more robust round-robin approach, and compare its performance to a multivariate linear regression. The random forest successfully outperforms the linear regression in modeling hub-height turbulence intensity, with a normalized root-mean-square error as low as 0.014 when using 30-minute average data. In order to achieve such low root-mean-square error values, the knowledge of hub-height turbulence kinetic energy (which can instead be modeled in the Weather Research and Forecasting model) is needed. Interestingly, we find that the performance of the random forest generalizes well when considering a round-robin validation (i.e., when the algorithm is trained at one site such as Perdigao or Southern Great Plains) and then applied to model hub-height turbulence intensity at the other location.

17 WIND ENERGY↗

NASA SPoRT Land Information System Products for Soil Moisture Analysis

The NASA Short-term Prediction Research and Transition (SPoRT) Program has been producing a near real-time instance of NASA’s Land Information System (hereafter known as SPoRT-LIS) since 2010, which contains output of soil moisture and temperature at layered depths. The unique configuration of the SPoRT-LIS enables decision-making on operational timescales since it assimilates near real-time observations such as Green Vegetation Fraction from the Visible Infrared Imaging Radiometer Suite and Quantitative Precipitation Estimates from the Multi-Radar Multi-Sensor System. The SPoRT-LIS was developed initially to provide land surface initialization variables for local numerical weather prediction models, such as the Weather Research and Forecasting (WRF) model. The earliest documented uses of the SPoRT-LIS as a tool for local drought analysis came from the National Weather Service Office in Huntsville, AL in 2011, in which data were used to provide recommendations for drought category changes to the U.S. Drought Monitor. Through engagement with SPoRT collaborative partners, use of the SPoRT-LIS has gradually expanded in recent years as a component of drought analysis and feedback to the U.S. Drought Monitor. This effort was aided by feedback from end users who expressed needs for specific soil moisture variables, which led to increased applicability for analysis by others in the drought community. This presentation will provide information on the SPoRT-LIS for drought analysis and the collaborative process that has led to changes in product output to meet user needs, with focus in the Southern Appalachian region. However, applications for hydrology and fire weather will also be discussed.

Land surface modeling↗

Occlusion-Perturbed Deep Learning for Probabilistic Solar Forecasting via Sky Images

Solar forecasting is shifting to the probabilistic paradigm due to the inherent uncertainty within the solar resource. Input uncertainty quantification is one of the widely used and best-performing ways to model solar uncertainty. However, compared to other sources of inputs, such as numerical weather prediction models, pure sky image-based probabilistic solar forecasting lags behind. In this research, an occlusion-perturbed convolutional neural network, named the PSolarNet, is developed. The PSolarNet provides very short-term deterministic forecasts, forecast scenarios, and probabilistic forecasts of the global horizontal irradiance from sky image sequences. Case studies based on 6 years of open-source data show that the developed PSolarNet is able to generate accurate 10-minute ahead deterministic forecasts with a 5.62% normalized root mean square error, realistic and diverse forecast scenarios with a 0.966 average correlation with the actual time series, and reliable and sharp probabilistic forecasts with a 2.77% normalized continuous ranked probability score.

Bayesian model averaging↗

Occlusion-Perturbed Deep Learning for Probabilistic Solar Forecasting via Sky Images: Preprint

Solar forecasting is shifting to the probabilistic paradigm due to the inherent uncertainty within the solar resource. Input uncertainty quantification is one of the widely used and best-performing ways to model solar uncertainty. However, compared to other sources of inputs, such as numerical weather prediction models, pure sky image-based probabilistic solar forecasting lags behind. In this research, an occlusion-perturbed convolutional neural network, named the PSolarNet, is developed. The PSolarNet provides very short-term deterministic forecasts, forecast scenarios, and probabilistic forecasts of the global horizontal irradiance from sky image sequences. Case studies based on 6 years of open-source data show that the developed PSolarNet is able to generate accurate 10-minute ahead deterministic forecasts with a 5.62% normalized root mean square error, realistic and diverse forecast scenarios with a 0.966 average correlation with the actual time series, and reliable and sharp probabilistic forecasts with a 2.77% normalized continuous ranked probability score.

Bayesian model averaging↗

MISTiC Winds, a Micro-Satellite Constellation Approach to High Resolution Observations of the Atmosphere Using Infrared Sounding and 3D Winds Measurements

MISTiC(TM) Winds is an approach to improve short-term weather forecasting based on a miniature high resolution, wide field, thermal emission spectrometry instrument that will provide global tropospheric vertical profiles of atmospheric temperature and humidity at high (3-4 km) horizontal and vertical ( 1 km) spatial resolution. MISTiCs extraordinarily small size, payload mass of less than 15 kg, and minimal cooling requirements can be accommodated aboard a 27U-class CubeSat or an ESPA-Class micro-satellite. Low fabrication and launch costs enable a LEO sunsynchronous sounding constellation that would collectively provide frequent IR vertical profiles and vertically resolved atmospheric motion vector wind observations in the troposphere. These observations are highly complementary to present and emerging environmental observing systems, and would provide a combination of high vertical and horizontal resolution not provided by any other environmental observing system currently in operation. The spectral measurements that would be provided by MISTiC Winds are similar to those of NASA's AIRS that was built by BAE Systems and operates aboard the AQUA satellite. These new observations, when assimilated into high resolution numerical weather models, would revolutionize short-term and severe weather forecasting, save lives, and support key economic decisions in the energy, air transport, and agriculture arenasat much lower cost than providing these observations from geostationary orbit. In addition, this observation capability would be a critical tool for the study of transport processes for water vapor, clouds, pollution, and aerosols. Key remaining technical risks are being reduced through laboratory and airborne testing under NASA's Instrument Incubator Program.

Maschhoff, K. R.↗

Evaluation of WRF-Solar Cloud Forecast Using the NSRDB: Preprint

Cloud forecast is a crucial component in predicting solar irradiance from numerical weather prediction (NWP) models. Assessing cloud properties from the NWP models requires significant work due to the need for high-quality data, spatial analysis covering model extent, and detailed analysis of model performance for different types of clouds. This study presents an evaluation of the WRF-Solar cloud forecast using the National Solar Radiation Database (NSRDB). We propose an evaluation framework applied to a single model prediction as well as ensemble-based forecasts. Various cloud detection metrics are calculated when comparing with the satellite-derived dataset. The mismatched clouds from the WRF-Solar model are quantified using nine cloud types classified by cloud top height and cloud optical depth. The results based on the WRF-Solar forecasts covering the entire U.S. for the full year of 2018 shows mismatched cloud frequency in the range of 8% - 46% for thick and high-level (deep convective) to thin and low-level (cumulus) clouds.

cloud mask forecast↗

A Case Study of the Impact of AIRS Temperature Retrievals on Numerical Weather Prediction

Large errors in numerical weather prediction are often associated with explosive cyclogenesis. Most studes focus on the under-forecasting error, i.e. cases of rapidly developing cyclones which are poorly predicted in numerical models. However, the over-forecasting error (i.e., to predict an explosively developing cyclone which does not occur in reality) is a very common error that severely impacts the forecasting skill of all models and may also present economic costs if associated with operational forecasting. Unnecessary precautions taken by marine activities can result in severe economic loss. Moreover, frequent occurrence of over-forecasting can undermine the reliance on operational weather forecasting. Therefore, it is important to understand and reduce the prdctions of extreme weather associated with explosive cyclones which do not actually develop. In this study we choose a very prominent case of over-forecasting error in the northwestern Pacific. A 960 hPa cyclone develops in less than 24 hour in the 5-day forecast, with a deepening rate of about 30 hPa in one day. The cyclone is not versed in the analyses and is thus a case of severe over-forecasting. By assimilating AIRS data, the error is largely eliminated. By following the propagation of the anomaly that generates the spurious cyclone, it is found that a small mid-tropospheric geopotential height negative anomaly over the northern part of the Indian subcontinent in the initial conditions, propagates westward, is amplified by orography, and generates a very intense jet streak in the subtropical jet stream, with consequent explosive cyclogenesis over the Pacific. The AIRS assimilation eliminates this anomaly that may have been caused by erroneous upper-air data, and represents the jet stream more correctly. The energy associated with the jet is distributed over a much broader area and as a consequence a multiple, but much more moderate cyclogenesis is observed.

Reale, O.↗

Earth Remote Sensing for Weather Forecasting and Disaster Applications

NASA's constellation of current missions provide several opportunities to apply satellite remote sensing observations to weather forecasting and disaster response applications. Examples include: Using NASA's Terra and Aqua MODIS, and the NASA/NOAA Suomi-NPP VIIRS missions to prepare weather forecasters for capabilities of GOES-R; Incorporating other NASA remote sensing assets for improving aspects of numerical weather prediction; Using NASA, NOAA, and international partner resources (e.g. ESA/Sentinel Series); and commercial platforms (high-res, or UAV) to support disaster mapping.

Molthan, Andrew↗

Application of SeaWinds Scatterometer Data to Weather Analysis and Forecasting

The SeaWinds scatterometer (like NSCAT and ERS) is able to detect unequivocal signatures of meteorological features including cyclones, fronts, anticyclones, easterly waves and other precursors of hurricanes and typhoons. Through collaborative efforts between NASA and NOAA, National Weather Service marine forecasters are using SeaWinds data to improve analyses, forecasts and significant weather warnings for maritime interests. This results in substantial economic savings as well as the reduction of weather related loss of life at sea. The impact of SeaWinds on Numerical Weather Prediction models is on average modest but occasionally results in significant forecast improvements.

Atlas, Robert↗

Regional Assimilation of NASA Atmospheric Infrared Sounder (AIRS) Data

The NASA Short-term Prediction Research and Transition (SPORT) Center seeks to accelerate the infusion of NASA Earth Science Enterprise (ESE) observations, data assimilation and modeling research into NW S forecast operations and decision-making. The Atmospheric Infrared Sounder (AIRS), is expected to advance climate research and weather prediction into the 21 st century. It is one of six instruments onboard Aqua, a satellite that is part of NASA s Earth Observing System. AIRS, along with two partner microwave sounding instruments, represents the most advanced atmospheric sounding system ever deployed in space. The system is capable of measuring the atmospheric temperature in the troposphere with radiosonde accuracies of 1 K over 1 km-thick layers under both clear and cloudy conditions, while the accuracy of the derived moisture profiles will exceed that obtained by radiosondes. It is imperative that the scientific community is prepared to take full advantage of next-generation satellite data that will become available within the next decade. The purpose of this paper is to describe a procedure designed to optimally assimilate AIRS data at high spatial resolution over both land and ocean. The assimilation system used in this study is the Local Analysis and Prediction System (LAPS) developed at the Forecast System Laboratory used extensively around the globe. Results will focus on quality control issues associated with AIRS, optimal assimilation strategies, and the impact of the AIRS data on subsequent numerical forecasts at 12 km produced by the next generation Weather Research and Forecast (WRF) model.

Chou, Shih-Hung↗

Evaluating Implementations of the Immersed Boundary Method in the Weather Research and Forecasting Model

The terrain-following coordinate system used by many atmospheric models can cause numerical instabilities due to discretization errors as resolved terrain slopes increase and the grid becomes highly skewed. The immersed boundary (IB) method, which does not require the grid to conform to the terrain, has been shown to alleviate these errors, and has been used successfully for high-resolution atmospheric simulations over steep terrain, including vertical building surfaces. Since many previous applications of IB methods to atmospheric models have used very fine grid resolution (5 m or less), the present study seeks to evaluate IB method performance over a range of grid resolutions and aspect ratios. Two classes of IB algorithms, velocity reconstruction and shear stress reconstruction, are tested within the common framework of the Weather Research and Forecasting (WRF) Model. Performance is evaluated in two test cases, one with flat terrain and the other with the topography of Askervein Hill, both under neutrally stratified conditions. WRF-IB results are compared to similarity theory, observations, and native WRF results. Despite sensitivity to the location at which the IB intersects the model grid, the velocity reconstruction IB method shows consistent performance when used with a hybrid RANS/LES surface scheme. The shear stress reconstruction IB method is not sensitive to the grid intersection, but is less consistent and near-surface velocity errors can occur at coarse resolutions. This study represents an initial investigation of IB method variability across grid resolutions in WRF. Future work will focus on improving IB method performance at intermediate to coarse resolutions.

54 ENVIRONMENTAL SCIENCES↗

Development and Implementation of Dynamic Scripts to Execute Cycled WRF/GSI Forecasts

Automating the coupling of data assimilation (DA) and modeling systems is a unique challenge in the numerical weather prediction (NWP) research community. In recent years, the Development Testbed Center (DTC) has released well-documented tools such as the Weather Research and Forecasting (WRF) model and the Gridpoint Statistical Interpolation (GSI) DA system that can be easily downloaded, installed, and run by researchers on their local systems. However, developing a coupled system in which the various preprocessing, DA, model, and postprocessing capabilities are all integrated can be labor-intensive if one has little experience with any of these individual systems. Additionally, operational modeling entities generally have specific coupling methodologies that can take time to understand and develop code to implement properly. To better enable collaborating researchers to perform modeling and DA experiments with GSI, the Short-term Prediction Research and Transition (SPoRT) Center has developed a set of Perl scripts that couple GSI and WRF in a cycling methodology consistent with the use of real-time, regional observation data from the National Centers for Environmental Prediction (NCEP)/Environmental Modeling Center (EMC). Because Perl is open source, the code can be easily downloaded and executed regardless of the user's native shell environment. This paper will provide a description of this open-source code and descriptions of a number of the use cases that have been performed by SPoRT collaborators using the scripts on different computing systems.

Zavodsky, Bradley↗

NASA Observations and Modeling During ICE-POP

Recap: NASA-Specific Objectives for ICE-POP: Provide real-time observational and NWP data in support of ICE-POP, participate in significant international science effort; GPM (Global Precipitation Measurement) Ground Validation and NASA Weather Program -Direct/physical validation of active/passive satellite-based snowfall retrieval algorithms over coastline and mountains; melting layer interaction with terrain -Physics of snow, coupling to snow water equivalent rate and satellite remote sensor retrieval algorithm assumptions - -Size distributions, types/habit, water equivalent, profiles -NU-WRF (NASA-Unified Weather Research and Forecasting) Model plus Observational analyses: Movement toward “level IV products” leverage intensive and multi-faceted NWP (Numerical Weather Prediction) component -Model precipitation processes (liquid, mixed phase and frozen); Build model testing database for further active/passive remote sensing algorithm development (e.g., satellite data simulators) -"Integrated" validation of products in operational context.

Precipitation Science↗

What Polarimetric Weather Radars Offer to Cloud Modelers: Forward Radar Operators and Microphysical/Thermodynamic Retrievals

The utilization of polarimetric weather radars for optimizing cloud models is a next frontier of research. It is widely understood that inadequacies in microphysical parameterization schemes in numerical weather prediction (NWP) models is a primary cause of forecast uncertainties. Due to its ability to distinguish between hydrometeors with different microphysical habits and to identify “polarimetric fingerprints” of various microphysical processes, polarimetric radar emerges as a primary source of needed information. There are two approaches to leverage this information for NWP models: (1) radar microphysical and thermodynamic retrievals and (2) forward radar operators for converting the model outputs into the fields of polarimetric radar variables. In this paper, we will provide an overview of both. Polarimetric measurements can be combined with cloud models of varying complexity, including ones with bulk and spectral bin microphysics, as well as simplified Lagrangian models focused on a particular microphysical process. Combining polarimetric measurements with cloud modeling can reveal the impact of important microphysical agents such as aerosols or supercooled cloud water invisible to the radar on cloud and precipitation formation. Some pertinent results obtained from models with spectral bin microphysics, including the Hebrew University cloud model (HUCM) and 1D models of melting hail and snow coupled with the NSSL forward radar operator, are illustrated in the paper.

54 ENVIRONMENTAL SCIENCES↗

Multimodel simulation of vertical gas transfer in a temperate lake

In recent decades, several lake models of varying complexity have been developed and incorporated in numerical weather prediction systems and climate models. To foster enhanced forecasting ability and verification, improvement of these lake models remains essential. This especially applies to the limited simulation capabilities of biogeochemical processes in lakes and greenhouse gas exchanges with the atmosphere. Here we present multi-model simulations of physical variables and dissolved gas dynamics in a temperate lake (Harp Lake, Canada). The five models (ALBM, FLake, LAKE, LAKEoneD, MTCR-1) considered within this most recent round of the Lake Model Intercomparison Project (LakeMIP) all captured the seasonal temperature variability well. In contrast, none of the models is able to reproduce the exact dates of ice-cover and ice-off, leading to considerable errors in the simulation of eddy diffusivity around those dates.We then conducted an additional modeling experiment with a diffusing passive tracer to isolate the effect of the eddy diffusivity on gas concentration. Remarkably, sophisticated k -" models do not demonstrate a significant difference in the vertical diffusion of a passive tracer compared to models with much simpler turbulence closures. All models simulate less intensive spring overturn compared to autumn. Reduced mixing in the models consequently leads to the accumulation of the passive tracer distribution in the water column. The lake models with a comprehensive biogeochemical module, such as ALBM and LAKE, predict dissolved oxygen dynamics adequate to the observed data. However, for the surface carbon dioxide concentration the correlation between modeled (ALBM, LAKE) and observed data is weak (~0.3). Overall our results indicate the need to improve the representation of physical and biogeochemical processes in lake models, thereby contributing to enhanced weather prediction and climate projection capabilities.

Guseva, Sofya↗

Doppler lidar for measurement of atmospheric wind fields

Measurements of wind fields in the earth's troposphere with daily global coverage is widely considered as a significant advance for forecasting and transport studies. For optimal use by NWP (Numerical Weather Prediction) models the horizontal and vertical resolutions should be approximately 100 km and 1 km, respectively. For boundary layer studies vertical resolution of a few hundred meters seems essential. Earth-orbiting Doppler lidar has a unique capability to measure global winds in the troposphere with the high vertical resolution required. The lidar approach depends on transmission of pulses with high spectral purity and backscattering from the atmospheric aerosol particles or layered clouds to provide a return signal. Recent field measurement campaigns using NASA research aircraft have resulted in collection of aerosol and cloud data which can be used to optimize the Doppler lidar instrument design and measurement strategy.

Menzies, Robert T.↗