Search NASA⌕ Search

SEARCH · Search NASA

Results for “operando modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The nanoscale distribution of copper and its influence on charge collection in CdTe solar cells

For decades, Cu has been the primary dopant in CdTe photovoltaic absorbers. Typically, Cu acceptor concentrations in these devices are on the order of 1 1014 cm-3, which has made it notoriously difficult to directly correlate nanoscale Cu distributions to the local charge transport properties of these devices. To measure and correlate these properties, measurement techniques require high sensitivity to elemental concentration, large penetration depth, and operando compatibility. Techniques such as secondary-ion mass spectroscopy and X-ray energy dispersive spectroscopy are widely adopted to measure Cu concentrations, but they are limited by penetration depth, sensitivity, or spatial resolution. Additionally, they lack the operando capabilities required to correlate one-to-one Cu concentrations to electrical performance. In this work, correlative X-ray microscopy is used to investigate the spatial distribution of Cu and its impact on charge collection through the depth and breadth of CdTe photovoltaic devices. Plan-view, nanoscale X-ray fluorescence maps clearly demonstrate the spatial segregation of copper around regions thought to be CdTe grain boundaries. Complementary cross-section imaging unveils the transition of the maximum charge-collection efficiency from the ZnTe-CdTe interface to the CdS-CdTe interface as a function of Cu incorporation. The copper concentration through the depth of the CdTe layer is characterized by slow and fast diffusion components, and cross-section charge-transport modeling shows that the experimentally obtained charge collection can be explained by the modeled acceptor distribution through the depth of the CdTe layer.

14 SOLAR ENERGY↗
DOE OSTI2019

Structural Basis of CO 2 Adsorption in a Flexible Metal-Organic Framework Material

This paper reports on the structural basis of CO 2 adsorption in a representative model of flexible metal-organic framework (MOF) material, Ni(1,2-bis(4-pyridyl)ethylene)[Ni(CN) 4 ] (NiBpene or PICNIC-60). NiBpene exhibits a CO 2 sorption isotherm with characteristic hysteresis and features on the desorption branch that can be associated with discrete structural changes. Various gas adsorption effects on the structure are demonstrated for CO 2 with respect to N 2 , CH 4 and H 2 under static and flowing gas pressure conditions. For this complex material, a combination of crystal structure determination and density functional theory (DFT) is needed to make any real progress in explaining the observed structural transitions during adsorption/desorption. Possible enhancements of CO 2 gas adsorption under supercritical pressure conditions are considered, together with the implications for future exploitation. In situ operando small-angle neutron and X-ray scattering, neutron diffraction and X-ray diffraction under relevant gas pressure and flow conditions are discussed with respect to previous studies, including ex situ, a priori single-crystal X-ray diffraction structure determination. The results show how this flexible MOF material responds structurally during CO 2 adsorption; single or dual gas flow results for structural change remain similar to the static (Sieverts) adsorption case, and supercritical CO 2 adsorption results in enhanced gas uptake. Insights are drawn for this representative flexible MOF with implications for future flexible MOF sorbent design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

MultiTaskDeltaNet: change detection-based image segmentation for operando ETEM with application to carbon gasification kinetics

Transforming in situ transmission electron microscopy (TEM) imaging into a tool for spatially-resolved operando characterization of solid-state reactions requires automated, high-precision semantic segmentation of dynamically evolving features. However, traditional deep learning methods for semantic segmentation often face limitations due to the scarcity of labeled data, visually ambiguous features of interest, and scenarios involving small objects. To tackle these challenges, we introduce MultiTaskDeltaNet (MTDN), a novel deep learning architecture that creatively reconceptualizes the segmentation task as a change detection problem. By implementing a unique Siamese network with a U-Net backbone and using paired images to capture feature changes, MTDN effectively leverages minimal data to produce high-quality segmentations. Furthermore, MTDN utilizes a multi-task learning strategy to exploit correlations between physical features of interest. In an evaluation using data from in situ environmental TEM (ETEM) videos of filamentous carbon gasification, MTDN demonstrated a significant advantage over conventional segmentation models, particularly in accurately delineating fine structural features. Notably, MTDN achieved a 10.22% performance improvement over conventional segmentation models in predicting small and visually ambiguous physical features. This work bridges key gaps between deep learning and practical TEM image analysis, advancing automated characterization of nanomaterials in complex experimental settings.

08 HYDROGEN↗
DOE OSTI2021

Enabling Efficient Water Splitting with Advanced Materials Designed for High pH Membrane Interface

This project was focused on developing the durable, high-performance materials and interfaces for advanced water splitting, enabling a clear pathway for achieving <$2/Kg H2 (on scale) with efficiency of 43 kWh/kg H 2 via anion exchange membrane (AEM)-based electrolysis. We aimed to advance these final goals via an improved fundamental understanding of both hydrogen and oxygen evolution reactions (HER/OER) leading to novel platinum group metal (PGM)-free catalyst materials in conjunction with critical improvements in membrane and ionomers and gas evolution electrodes with corresponding characterization and testing. Northeastern University (NU) lead this effort focusing on catalyst development and characterization (both in situ and ex situ) while project partners lead improvements in ionomer and membrane materials and will aid in the development of specialized electrode and membrane electrode assemblies. In addition, close collaboration occured with the HydroGEN Energy Materials Network (EMN) National Laboratory consortium including efforts related to use of advanced ionomers, durability protocols and validation of electrolyzer materials (e.g. NREL), multiscale modeling and computation (e.g. LBNL), and molecular dynamics (MD) simulations of the membrane catalyst interface (e.g. SNL). The interactions with HydroGEN included exchange of data and materials as needed to facilitate project success.

08 HYDROGEN↗
DOE OSTI2020

Probing local electrochemistry via mechanical cyclic voltammetry curves

Understanding the mechanical response of an electrode during electrochemical cycling and its correlation to the device electrochemical performance is crucial to improving the performance of insertion-type energy storage devices, electrochemical actuators, water purification, ion separation and neuromorphic computing applications. Here, we visualized the electro-chemo-mechanical coupling behaviors during charge storage of anhydrous and hydrated WO 3 electrodes via in situ atomic force microscopy (AFM) and developed the concept of mechanical cyclic voltammetry (mCV) curves. The relationship between electrochemical current and strain was investigated with simplified models and the results revealed that the proton insertion/deinsertion process could be described through potential-dependent electro-chemo-mechanical coupling coefficients which might indicate changes in insertion processes during electrode cycling. The mCV mapping results highlight the local heterogeneity and show that the charging processes varied across the electrode. These local variations could be further correlated to local morphology, crystal orientations or chemical compositions with proper electrode designs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures

The drying of cement-based materials is intimately related to their durability, which has significant economic, social and environmental repercussions. The evolution of the saturation of the pore network and the associated drying shrinkage are in fact leading causes of cracking and of the ensuing penetration of aggressive chemicals. This process is highly heterogeneous, due to the thermo-hydric spatial gradients developing in the material from the exposed surfaces to its core and because of local effects, driven by the intrinsically heterogeneous micro-structure (e.g., by the distribution of pores and aggregates). It follows that macroscopic, sample-scale measurements cannot fully disclose the complexity of the underlying processes. In the last few decades, significant advances in full-field techniques have allowed an unprecedented insight into these local processes. For cement-based materials, x-ray and neutron tomography lend themselves as ideal, and highly complementary, tools for the study of their thermo-hydro-mechanical behavior. Notably, the high sensitivity to density variations of x-ray imaging gives access to the developments of fractures, in 4D (3D + time). On the other hand, neutron tomography allows the study of the evolution of the moisture field in 4D, thanks to its high hydrogen sensitivity. The combination of these two techniques provides a unique insight in thermo-hydro-mechanical couplings, e.g., the effect of cracks on the water content field. This contribution presents novel 5D datasets (3D tomographies along time, plus truly simultaneous x-ray and Neutron rapid acquisitions) in-operando of a cement paste and of a concrete sample heated at moderate temperatures (up to 140{sup ∘}C). The analysis of this 5D data-set (once aligned in time and across modalities) allows for example a quantification of the 4D moisture profiles which were found to predict an overall water loss at hydric equilibrium coherent with the corresponding analytical analysis. In the cement paste sample, the x-ray dataset captures the evolution of an extensive cracking network, opening and propagation toward the core of the sample. A novel analysis procedure is here proposed which allows the extraction of these fractures and the analysis of their interplay with local drying as captured through neutron imaging. This for example reveals the depth of penetration of drying in the vicinity of the fractures along time, which is essential for the assessment and calibration of hydro-mechanical coupled models.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hole Polaron Transport in Bismuth Vanadate BiVO 4 from Hybrid Density Functional Theory

In this paper, we address the chemical character and the mobility of hole polarons in BiVO 4 (BVO). Two distinct structures for hole polarons in BVO have been reported in the literature to date. “Standard” hybrid density functional theory (DFT) calculations have predicted hole polarons to be (BiO 8 ) dodecahedron-centered polarons, while Hubbard U-DFT (DFT + U) calculations have predicted single oxygen atom-centered polarons. Resolving these contrasting findings is critical to validate theory in materials research. We investigated the structure of hole polarons in BVO using hybrid DFT with varying fractions (α) of the exact exchange interaction that enters hybrid functionals. For values of the fraction α, from α = 0.25 to α = 0.45, we obtained both structures, the h + (BiO 8 ) hole structure and the h + (O) hole structure. For the smaller values of α, the h + (BiO 8 ) structure is lower in energy, while for the larger values of α, the h+(O) structure is more stable. The piece-wise linearity of DFT energies E(q) with respect to a point defect charge q is maintained satisfactorily in all cases, although the deviation is the smallest for hybrid DFT with a small exact exchange fraction. For α = 0.25, we determined the diffusivity of h + (BiO 8 ) holes from the Marcus/Holstein two-state model. The activation barrier for Bi-to-Bi hops (ΔG # ~76 meV) and mobility (μ ~0.029 cm2 V –1 s –1 ) are found to be in close agreement with the published THz experimental data (ΔG # ~90 meV and μ exp ~0.02 cm2 V –1 s –1 , respectively). In h + (BiO 8 ) structures, nearly 25% of the hole charge and unpaired spin reside on the Bi atom and the rest is divided among the eight O atoms. The hole is best described as a Bi-centered hole, rather than a Bi 6s hole. In contrast, in h + (O) structures, about 75% of the unpaired spin population resides on the O atom. These findings suggest that if one wishes to resolve this theoretical dichotomy, there remains a need for further experimental characterization of hole polarons in BVO with techniques that could identify the oxidation state of Bi and O atoms in operando conditions and help validate theoretical results of structure and transport.

14 SOLAR ENERGY↗
DOE OSTI2021

Steering the methanol steam reforming reactivity of intermetallic Cu–In compounds by redox activation: stability vs . formation of an intermetallic compound–oxide interface

To compare the inherent methanol steam reforming properties of intermetallic compounds and a corresponding intermetallic compound–oxide interface, we selected the Cu–In system as a model to correlate the stability limits, self-activation and redox activation properties with the catalytic performance. Three distinct intermetallic Cu–In compounds – Cu 7 In 3 , Cu 2 In and Cu 11 In 9 – were studied both in an untreated and redox-activated state resulting from alternating oxidation–reduction cycles. The stability of all studied intermetallic compounds during methanol steam reforming (MSR) operation is essentially independent of the initial stoichiometry and all accordingly resist substantial structural changes. The inherent activity under batch MSR conditions is highest for Cu 2 In, corroborating the results of a Cu 2 In/In 2 O 3 sample accessed through reactive metal–support interaction. Under flow MSR operation, Cu 7 In 3 displays considerable deactivation, while Cu 2 In and Cu 11 In 9 feature stable performance at simultaneously high CO 2 selectivity. Here, the missing significant self-activation is most evident in the operando thermogravimetric experiments, where no oxidation is detected for any of the intermetallic compounds. In situ X-ray diffraction allowed us to monitor the partial decomposition and redox activation of the Cu–In intermetallic compounds into Cu 0.9 In 0.1 /In 2 O 3 (from Cu 7 In 3 ), Cu 7 In 3 /In 2 O 3 (from Cu 2 In) and Cu 7 In 3 /Cu 0.9 In 0.1 /In 2 O 3 (from Cu 11 In 9 ) interfaces with superior MSR performance compared to the untreated samples. Although the catalytic profiles appear surprisingly similar, the latter interface with the highest indium content exhibits the least deactivation, which we explain by formation of stabilizing In 2 O 3 patches under MSR conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Operando X-ray tomography and sub-second radiography for characterizing transport in polymer electrolyte membrane electrolyzer

Utilizing hydrogen gas as an energy carrier and enabling a hydrogen economy is a promising step towards decarbonization. Water electrolysis is a key process in hydrogen generation, but electrolyzers face a couple technological hurdles before widespread integration could occur. Understanding morphology evolution and transport processes in an operating polymer electrolyte membrane (PEM) electrolyzer is key to reducing cost and increasing efficiency. In this study, combined operando X-ray computed tomography and radiography are used to study transport and degradation in PEM electrolyzers subject to applied current densities. Tomography enables three-dimensional steady-state imaging but does not capture transport subtleties. Radiography is limited to two-dimensions but does capture transient phenomena. The tomography results depict degradation of the catalyst layer on the anode side of the electrolyzer. The rate of degradation was observed to increase as the applied current density increased. The catalyst particle detachment is due to autonomous propulsion during the oxygen evolution reaction. Particles that mechanically rip off the membrane were observed to be redeposited into the porous transport layer. During radiography, sub-second exposure time is required to capture the transient behavior of oxygen evolution, even at the lower current densities (50-200 mAcm -2 ). Various flow regimes were observed in the channel ranging from bubbly to slug flow depending on current density. In conclusion, experimental observations agree with a model that an increase in current density increases oxygen bubble diameter and decreases bubble residence time within the electrolyzer channel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Perspective—Lithium Metal Nucleation and Growth on Conductive Substrates: A Multi-Scale Understanding from Atomistic, Nano-, Meso-, to Micro-Scales

Reversible lithium (Li) deposition and stripping on conductive substrates like copper is vital for long-life high-energy rechargeable Li batteries. The reversibility is believed hindered by solid electrolyte interphase (SEI) formation and Li dendritic growth. Via in situ, operando cryo-microscopy and molecular dynamics simulation, we discovered amorphous Li before a disorder-order phase transition to bcc phase. The kinetics plays a significant role in Li nucleation and morphology evolution. This perspective on Li nucleation and growth from atomistic to nano- (<20 nm), meso- (20–100 nm), and micro-scales (>100 nm) provides a practical guidance on regulating dense Li deposits reversibly for long life performance.

25 ENERGY STORAGE↗
DOE OSTI2022

Excitonic Effects in X-ray Absorption Spectra of Fluoride Salts and Their Surfaces

Given their natural abundance and thermodynamic stability, fluoride salts may appear as evolving components of electrochemical interfaces in Li-ion batteries and emergent multivalent ion cells. This is due to the practice of employing electrolytes with fluorine-containing species (salt, solvent, or additives) that electrochemically decompose and deposit on the electrodes. Operando X-ray absorption spectroscopy (XAS) can probe the electrode–electrolyte interface with a single-digit nanometer depth resolution and offers a wealth of insights into the evolution and Coulombic efficiency or degradation of prototype cells, provided that the spectra can be reliably interpreted in terms of local oxidation state, atomic coordination, and electronic structure about the excited atoms. Here we explore fluorine K-edge XAS of mono- (Li, Na, and K) and di-valent (Mg, Ca, and Zn) fluoride salts from a theoretical standpoint and discover a surprising level of detailed electronic structure information about these materials despite the relatively predictable oxidation state and ionicity of the fluoride anion and the metal cation. Utilizing a recently developed many-body approach based on the ΔSCF method, we calculate the XAS using density functional theory and experimental spectral profiles are well reproduced despite some experimental discrepancies in energy alignment within the literature, which we can correct for in our simulations. We outline a general methodology to explain shifts in the main XAS peak energies in terms of a simple exciton model and explain line-shape differences resulting from the mixing of core-excited states with metal d character (for K and Ca specifically). Given ultimate applications to evolving interfaces, some understanding of the role of surfaces and their terminations in defining new spectral features is provided to indicate the sensitivity of such measurements to changes in interfacial chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Near-Surface Imaging of the Multicomponent Gas Phase above a Silver Catalyst during Partial Oxidation of Methanol

Fundamental chemistry in heterogeneous catalysis is increasingly explored using operando techniques in order to address the pressure gap between ultrahigh vacuum studies and practical operating pressures. Because most operando experiments focus on the surface and surface-bound species, there is a knowledge gap of the near-surface gas phase and the fundamental information the properties of this region convey about catalytic mechanisms. In this work, we demonstrate in situ visualization and measurement of gas-phase species and temperature distributions in operando catalysis experiments using complementary near-surface optical and mass spectrometry techniques. The partial oxidation of methanol over a silver catalyst demonstrates the value of these diagnostic techniques at 600 Torr (800 mbar) pressure and temperatures from 150 to 410 °C. Planar laser-induced fluorescence provides two-dimensional images of the formaldehyde product distribution that show the development of the boundary layer above the catalyst under different flow conditions. Raman scattering imaging provides measurements of a wide range of major species, such as methanol, oxygen, nitrogen, formaldehyde, and water vapor. Near-surface molecular beam mass spectrometry enables simultaneous detection of all species using a gas sampling probe. Detection of gas-phase free radicals, such as CH 3 and CH 3 O, and of minor products, such as acetaldehyde, dimethyl ether, and methyl formate, provides insights into catalytic mechanisms of the partial oxidation of methanol. The combination of these techniques provides a detailed picture of the coupling between the gas phase and surface in heterogeneous catalysis and enables parametric studies under different operating conditions, which will enhance our ability to constrain microkinetic models of heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding the Stability of Manganese Chromium Antimonate Electrocatalysts through Multimodal In Situ and Operando Measurements

Herein, we utilize an on-line electrochemical flow cell coupled with an inductively coupled plasma-mass spectrometer (ICP-MS) to characterize the impact of composition and reactant gas on the multielement dissolution of Mn(-Cr)-Sb-O electrocatalysts. Compared to Mn 2 O 3 and Cr 2 O 3 oxides, we find that the antimonate framework stabilizes Mn at OER potentials and Cr at both ORR and OER potentials. Furthermore, dissolution of Mn and Cr from Mn(-Cr)-Sb-O is found to be driven by ORR reaction rate, with minimal dissolution under N 2 . We observe preferential dissolution of Cr totaling 13% over 10 minutes at 0.3, 0.6, and 0.9 V vs RHE, with only 1.5% loss of Mn, indicating an enrichment of Mn at the surface of the particles. Despite this asymmetric dissolution, in situ X-ray absorption spectroscopy (XAS) showed no measurable changes in the Mn K-edge at comparable potentials. This lack of change could suggest that modification to the Mn oxidation state in the surface layer is too small or that layer is too thin to be measured with the bulk XAS measurement. Lastly, on-line ICP-MS was used to assess the effects of applied potential, scan rate, and current of Mn-Cr-Sb-O during cyclic voltammetry and accelerated stress tests. With this deeper understanding of the interplay between oxygen reduction and dissolution, testing procedures were identified to maximize both activity and stability. This work highlights the use of multi-modal in situ characterization techniques in tandem to build a more complete model of stability and develop protocols for optimizing catalyst performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando synchrotron X-ray analysis of melt pool dynamics in an Al-Sn immiscible alloy

The melt flow in an Al-50vol.% Sn immiscible alloy, produced by single-track laser melting of Al and Sn elemental powders, was studied in real time. High-speed synchrotron X-ray imaging was used to track Al and Sn liquids’ movements, and also to examine elemental distributions in the laser tracks, complimented by electron microscopy after solidification. Key aspects, including melt pool geometry, keyhole instability, and flow dynamics (flow pattern and velocity), were examined using digital image analysis. Relatively deeper melt pools formed at 400 W and 300 mm/s exhibited greater stability, with smooth surfaces, consistent outward flow, and minor vortices near the keyhole. In contrast, shallower pools produced at higher scanning speeds (>500 mm/s) demonstrated greater instability with increased surface waviness, and stronger velocity fluctuations, leading to numerous micro-vortices and increased Al-Sn heterogeneity. Velocity scale estimations, supported by experimental observations, examined the roles of vapour pressure, Marangoni effect, buoyancy, inertial, and surface tension forces in the flow. The results revealed that vapour pressure and mechanical waves dominated at high scanning speeds (shallow pools), while Marangoni forces were equally significant in deep pools at lower speeds (300 mm/s). Buoyancy was found to have minimal impact in both cases. Furthermore, the interaction between inertial and surface tension forces played a critical role in determining the degree of waviness of the pools’ surfaces. These findings offer valuable insights into melt pool dynamics during laser processing of immiscible alloys and other metallic systems using elemental powders, and provide guidance for developing high-fidelity computational fluid dynamics models.

immiscible alloys↗
DOE OSTI2025

First-Principles Statistical Mechanics Study of Magnetic Fluctuations and Order–Disorder in the Spinel LiNi 0.5 Mn 1.5 O 4 Cathode

While significant magnetic interactions exist in lithium transition metal oxides, commonly used as Li-ion cathodes, the interplay between magnetic couplings, disorder, and redox processes remains poorly understood. In this work, we focus on the high-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) cathode as a model system on which to apply a computational framework that uses first principles-based statistical mechanics methods to predict the finite temperature magnetic properties of materials and provide insights into the complex interplay between magnetic and chemical degrees of freedom. Density functional theory calculations on multiple distinct Ni–Mn orderings within the LNMO system, including the ordered ground-state structure (space group P4332), reveal a preference for a ferrimagnetic arrangement of the Ni and Mn sublattices due to strong antiferromagnetic superexchange interactions between neighboring Mn 4+ and Ni 2+ ions and ferromagnetic Mn–Mn and Ni–Ni couplings, as revealed by magnetic cluster expansions. These results are consistent with qualitative predictions using the Goodenough-Kanamori-Anderson rules. Simulations of the finite temperature magnetic properties of LNMO are conducted using Metropolis Monte Carlo. We find that a “semiclassical” Monte Carlo sampling method based on the Heisenberg Hamiltonian accurately predicts experimental magnetic transition temperatures observed in magnetometry measurements. This study highlights the importance of a robust computational toolkit that accurately captures the complex chemomagnetic interactions and predicts finite temperature magnetic behavior to help analyze experimental magnetic and magnetic resonance spectroscopy data acquired ex situ and operando.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Site heterogeneity and broad surface-binding isotherms in modern catalysis: Building intuition beyond the Sabatier principle

Learning the science of heterogeneous catalysis and electrocatalysis always starts with the simple case of a flat, uniform surface with an ideal adsorbate. It has of course been recognized for a century that real catalysts are more complicated. For the increasingly complex catalysts of the 21st century, this Perspective argues that surface heterogeneity and non-ideal binding isotherms are central features, and their implications need to be incorporated in current thinking. A variety of systems are described herein where catalyst complexity leads to broad, non-Langmuirian surface isotherms for the binding of hydrogen atoms – and this occurs even for ideal, flat Pt(111) surfaces. Modern catalysis employs nanoscale materials whose surfaces have substantial step, edge, corner, impurity, and other defect sites, and they increasingly have both metallic and non-metallic elements M n X m , including metal oxides, chalcogenides, pnictides, carbides, doped carbons, etc. The surfaces of such catalysts are often not crystal facets of the bulk phase underneath, and they typically have a variety of potential active sites. Catalytic surfaces in operando are often non-stoichiometric, amorphous, dynamic, and impure, and often vary from one part of the surface to another. Understanding of the issues that arise at such nanoscale, multi-element catalysts is just beginning to emerge. Yet these catalysts are widely discussed using Brønsted/Bell-Evans-Polanyi (BEP) relations, volcano plots, Tafel slopes, the Butler-Volmer equation, and other linear free energy relations (LFERs), which all depend on the implicit assumption that the active sites are “similar” and that surface adsorption is close to ideal. These assumptions underly the ubiquitous intuition based on the Sabatier Principle, that the fastest catalysis will occur when key intermediates have free energies of adsorption that are not too strong nor too weak. Current catalysis research often aims to minimize the complexity of non-ideal isotherms through experimental and computational design (e.g., the use of single crystal surfaces), and these studies are the foundation of the field. In contrast, this Perspective argues that the heterogeneity of binding sites and binding energies is an inherent strength of these catalysts. Here, this diversity makes many nanoscale catalysts inherently a high-throughput screen wrapped in a tiny package. Only by making the heterogeneity part of the foundation of catalysis models, sorting the types of active sites and dissecting non-ideal binding isotherms, will modern catalysis learn to harness the inherent diversity of real catalysts. Controlling and exploiting diversity rather than avoiding it will help to optimize complex modern catalysts and catalytic conditions.

Mayer, James M.↗