Search NASA⌕ Search

SEARCH · Search NASA

Results for “organic base”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Elucidating Interfacial Phenomena between Solid-State Electrolytes and the Sulfur-Cathode of Lithium–Sulfur Batteries

Sulfide solid-state electrolytes are promising materials to be used in Li–S batteries because they have the potential to mitigate some of the challenges currently faced by this technology such as the dissolution of polysulfide species and the flammability of conventional organic-based electrolytes. Nevertheless, the electrode/electrolyte interfaces are not well-understood yet. In this study, we use density functional theory and ab initio molecular dynamics simulations to investigate the formation of the cathode–electrolyte interface at two limiting states of charge: S 8 and Li 2 S. β-Li 3 PS 4 and two lithium halide-doped sulfides (Li 6 PS 5 Cl and Li 7 P 2 S8I) were selected because of their Li-ion superionic conductivity and compatibility with sulfur electrodes. The work of adhesion and interfacial energy of the interfaces were calculated as descriptors of the interfacial properties, and then the mechanisms of the interfacial reactions taking place were characterized. Lastly, a charge transfer analysis is presented, suggesting that, overall, the S 8 electrode will oxidize the electrolyte, whereas the fully discharged Li 2 S cathode will reduce it at different extents depending on the reactivity of the exposed facet.

25 ENERGY STORAGE↗
DOE OSTI2022

Selenite and Selenate Sequestration during Coprecipitation with Barite: Insights from Mineralization Processes of Adsorption, Nucleation, and Growth

Coprecipitation of selenium oxyanions with barite is a facile way to sequester Se in the environments. However, the chemical composition of Se-barite coprecipitates usually deviates from that predicted from thermodynamic calculations. This discrepancy was resolved by considering variations in nucleation and growth rates controlled by ion–mineral interactions, solubility, and interfacial energy. For homogeneous precipitation, ~10% of sulfate, higher than thermodynamic predictions (<0.3%), was substituted by Se(IV) or Se(VI) oxyanion, which was attributed to adsorption-induced entrapment during crystal growth. For heterogeneous precipitation, thiol- and carboxylic-based organic films, utilized as model interfaces to mimic the natural organic-abundant environments, further enhanced the sequestration of Se(VI) oxyanions (up to 41–92%) with barite. Such enhancement was kinetically driven by increased nucleation rates of selenate-rich barite having a lower interfacial energy than pure barite. In contrast, only small amounts of Se(IV) oxyanions (~1%) were detected in heterogeneous coprecipitates mainly due to a lower saturation index of BaSeO 3 and deprotonation degree of Se(IV) oxyanion at pH 5.6. Finally, these roles of nanoscale mineralization mechanisms observed during composition selection of Se-barite could mark important steps toward the remediation of contaminants through coprecipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Investigating Electron Conductivity Regimes in the Bacterial Cytochrome Wire OmcS

The anaerobic bacterium Geobacter sulfurreducens produces extracellular, electronically conductive cytochrome polymer wires that are conductive over micron length scales. Structure models from cryo-electron microscopy data show OmcS wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. However, the mechanism by which this heme arrangement supports long-range electronic conduction remains unknown. Structure models from cryo-electron microscopy data show these wires form a linear chain of hemes along the protein wire axis, which is proposed as the structural basis supporting their electronic properties. Existing computational models using static heme redox potentials and coupling energies fail to explain experimental observations, predicting conductances 10,000 to 100,000 times lower than measured values. Here, we investigate how dynamic disorder affects site energies, interheme coupling, and long-range electronic conductivity within these cytochrome wires. We introduce an approach to extract charge carrier site information directly from Kohn–Sham density functional theory, without employing projector schemes, and show that site and coupling energies are highly sensitive to changes in interheme geometry and the surrounding electrostatic environment. Unlike models that incorporate dynamic disorder as a thermally averaged quantity, our quantum charge carrier model incorporates proxies for dynamic disorder through decoherence corrections, yielding predicted diffusion coefficient closer to what is expected from experiment and comparable with other organic-based electronic materials. Based on these simulations, we propose that the instantaneous fluctuations of the local electrostatic environment can transiently lift energy degeneracies and delocalize charge carriers. Furthermore, these studies reveal how incorporating dynamic fluctuations associated with the environment resolves the discrepancy between theory and experiment in microbial cytochrome wires and highlight design principles for bioinspired, heme-based conductive materials.

Bioinorganic chemistry↗
DOE OSTI2021

Chemical Modifications of Ag Catalyst Surfaces with Imidazolium Ionomers Modulate H 2 Evolution Rates during Electrochemical CO 2 Reduction

Bridging polymer design with catalyst surface science is a promising direction for tuning and optimizing electrochemical reactors that could impact long-term goals in energy and sustainability. Particularly, the interaction between inorganic catalyst surfaces and organic-based ionomers provides an avenue to both steer reaction selectivity and promote activity. In this work, we studied the role of imidazolium-based ionomers for electrocatalytic CO 2 reduction to CO (CO 2 R) on Ag surfaces and found that they produce no effect on CO 2 R activity yet strongly promote the competing hydrogen evolution reaction (HER). By examining the dependence of HER and CO 2 R rates on concentrations of CO 2 and HCO 3 –, we developed a kinetic model that attributes HER promotion to intrinsic promotion of HCO 3 – reduction by imidazolium ionomers. We also show that varying the ionomer structure by changing substituents on the imidazolium ring modulates the HER promotion. This ionomer-structure dependence was analyzed via Taft steric parameters and density functional theory calculations, which suggest that steric bulk from functionalities on the imidazolium ring reduces access of the ionomer to both HCO 3 – and the Ag surface, thus limiting the promotional effect. Our results help develop design rules for ionomer–catalyst interactions in CO 2 R and motivate further work into precisely uncovering the interplay between primary and secondary coordination in determining electrocatalytic behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Curiosity Rover's Exploration of Glen Torridon, Gale Crater, Mars: An Overview of the Campaign and Scientific Results

The Mars Science Laboratory rover, Curiosity, explored the clay mineral-bearing Glen Torridon region for 1 Martian year between January 2019 and January 2021, including a short campaign onto the Greenheugh pediment. The Glen Torridon campaign sought to characterize the geology of the area, seek evidence of habitable environments, and document the onset of a potentially global climatic transition during the Hesperian era. Curiosity roved 5 km in total throughout Glen Torridon, from the Vera Rubin ridge to the northern margin of the Greenheugh pediment. Curiosity acquired samples from 11 drill holes during this campaign and conducted the first Martian thermochemolytic-based organics detection experiment with the Sample Analysis at Mars instrument suite. The lowest elevations within Glen Torridon represent a continuation of lacustrine Murray formation deposits, but overlying widespread cross bedded sandstones indicate an interval of more energetic fluvial environments and prompted the definition of a new stratigraphic formation in the Mount Sharp group called the Carolyn Shoemaker formation. Glen Torridon hosts abundant phyllosilicates yet remains compositionally and mineralogically comparable to the rest of the Mount Sharp group. Glen Torridon samples have a great diversity and abundance of sulfur-bearing organic molecules, which are consistent with the presence of ancient refractory organic matter. The Glen Torridon region experienced heterogeneous diagenesis, with the most striking alteration occurring just below the Siccar Point unconformity at the Greenheugh pediment. Results from the pediment campaign show that the capping sandstone formed within the Stimson Hesperian aeolian sand sea that experienced seasonal variations in wind direction.

58 GEOSCIENCES↗
DOE OSTI2021

Hidden order across online extremist movements can be disrupted by nudging collective chemistry

Disrupting the emergence and evolution of potentially violent online extremist movements is a crucial challenge. Extremism research has analyzed such movements in detail, focusing on individual- and movement-level characteristics. But are there system-level commonalities in the ways these movements emerge and grow? Here we compare the growth of the Boogaloos, a new and increasingly prominent U.S. extremist movement, to the growth of online support for ISIS, a militant, terrorist organization based in the Middle East that follows a radical version of Islam. We show that the early dynamics of these two online movements follow the same mathematical order despite their stark ideological, geographical, and cultural differences. The evolution of both movements, across scales, follows a single shockwave equation that accounts for heterogeneity in online interactions. These scientific properties suggest specific policies to address online extremism and radicalization. We show how actions by social media platforms could disrupt the onset and ‘flatten the curve’ of such online extremism by nudging its collective chemistry. Our results provide a system-level understanding of the emergence of extremist movements that yields fresh insight into their evolution and possible interventions to limit their growth.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Evaluating solvothermal and mechanochemical routes towards the metal–organic framework Mg 2 ( m -dobdc)

Metal–organic frameworks bearing coordinatively unsaturated Mg(II) sites are promising materials for gas storage, chemical separations, and drug delivery due to their low molecular weights and lack of toxicity. Furthermore, there remains a limited number of such MOFs reported in the literature. Herein, we investigate the gas sorption properties of the understudied framework Mg 2 (m-dobdc) (dobdc 4– = 4,6-dioxido-1,3-benzenedicarboxylate) synthesized under both solvothermal and mechanochemical conditions. Both materials are found to be permanently porous, as confirmed by 77 K N 2 adsorption measurements. In particular, Mg 2 (m-dobdc) synthesized under mechanochemical conditions using exogenous organic base displays one of the highest capacities reported to date (6.14 mmol g –1 ) for CO 2 capture in a porous solid under simulated coal flue gas conditions (150 mbar, 40 °C). As such, mechanochemically synthesized Mg 2 (m-dobdc) represents a promising new framework for applications requiring high gas adsorption capacities in a porous solid.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spontaneous carrier generation and low recombination in high-efficiency non-fullerene solar cells

The current research reveals the unique photo physical properties and carrier generation mechanisms of high efficiency non-fullerene acceptor-based organic photovoltaic blends. The analysis of device performance, morphology, and photo physics reveals that the interface carrier generation cannot support the device's current output. It is seen that primary photon excitons can dissociate into charge carriers in Y6, which displays a time scale of ∼0.3 ps with polaron yields above 28% in neat and blended thin films. This characteristic in combination with a large exciton diffusion length enables high morphology tolerance in Y6-overloaded blends. The carrier generation process is also combined with recombination studies. The recombination rate quantified by flux-dependent transient absorption measurements yields less than 5% total recombination and nearly 0% geminate recombination. Furthermore, these results define the advantages of the Y6 non-fullerene acceptor (NFA) and reveal the fundamental importance of developing new NFA materials with superior photo physical properties.

14 SOLAR ENERGY↗
DOE OSTI2022

Antimony doping to enhance luminescence of tin ($\mathrm{IV}$)-based hybrid metal halides

Lead-based organic–inorganic metal halides (OIMHs) have recently attracted special attention due to their efficient broadband photoluminescence. However, the toxicity of lead poses a challenge for their further development. In this paper we selected Sn(IV) as the metal center to synthesize the environmentally friendly and stable luminescent OIMHs (C 9 H 15 N 3 ) 2 SnCI 8 and C 9 H 15 N 3 ) 2 SnBr 8 (C 9 H 13 N 3 is 1-(2-2-pyridyl)piperazine). Both compounds possess zero-dimensional structures, crystallizing in the monoclinic space group P2 1 /c, and their optical band gaps were experimentally determined to be 3.19 and 2.60 eV, respectively. Under UV excitation at room temperature, (C 9 H 15 N 3 ) 2 SnCI 8 exhibited double-peak emissions centered at 405 and 688 nm, which were attributed to the organic cation and inorganic octahedra, respectively. Upon introducing 5s 2 -lone-pair-containing Sb 3+ in (C 9 H 15 N 3 ) 2 SnCI 8 , self-trapped emission was promoted, and the photoluminescence quantum yield increased from ~1% to ~17.84%. This work suggests effective strategies for finding environmentally friendly stable OIMHs and for further enhancing the luminescence properties through lone-pair-containing cation doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗
DOE OSTI2025

Physical models reveal indirect reader protein interactions that facilitate epigenetic crosstalk

The spatial organization of chromatin is governed by epigenetic factors, including epigenetic marks and the reader proteins that bind them. By dictating the accessibility of genomic loci, epigenetic factors contribute to the physical regulation of gene expression, enabling diverse cellular phenotypes to be encoded by a shared genome in an individual. Epigenetic dysregulation can lead to aberrations in chromatin architecture, contributing to diseases such as neurological disorders and cancers. Despite the known importance of chromatin organization for human health, the physical mechanisms governing chromatin folding remain underspecified. In this work, we develop a physical model of chromatin organization based on contributions from multiple epigenetic factors. Using our model, we evaluate how conditions in the nuclear environment and crosstalk between epigenetic marks affect the compartmentalization of chromatin into dense heterochromatin and loose euchromatin. Our results emphasize the role of reader protein binding in chromatin compartmentalization. We show that reader proteins interact through an indirect mechanism facilitated by the shared chromatin “scaffold” to which they bind. Under a scenario where reader proteins compete for binding sites, we find that indirect interactions affect the program adopted by the chromatin fiber. By isolating indirect modes of epigenetic crosstalk, we demonstrate how the interplay between epigenetic patterning and environmental factors influences chromatin architecture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Discriminating Uranium Isotopes Based on Fission Signatures Induced by Delayed Neutrons

The use of active interrogation to induce delayed neutron emission is a well-established technique for the characterization of special nuclear materials. Delayed neutrons have isotope-characteristic spectral and temporal signatures, which provide the basis for isotope identification. However, in bulk materials that contain an appreciable fissile (e.g., 235 U or 233 U) fraction, such as highly enriched uranium (HEU), delayed neutrons have a high probability of inducing additional fissions. As a result, the overall delayed neutron signature consists of two distinct components: the “primary” delayed neutrons (emitted directly by fission fragments) and the “secondary prompt” fission neutrons produced in fission induced by primary delayed neutrons. These prompt products differ from “primary” delayed neutrons both in their energy spectra and in the presence of coincident radiation released by the parent fission event. The presence and relative quantity of prompt products from delayed fission depend on the cross section of the material in the energy range of delayed neutrons, which may differ significantly between isotopes, thus providing an exploitable means for isotope differentiation. Here, we demonstrate two experimental approaches for discriminating between 235 U and 238 U isotopes based on the measurement of delayed neutron-induced fission products. First, HEU and depleted uranium objects are differentiated through the detection of high-energy prompt neutrons from delayed fission using both recoil-based organic liquid scintillators and thermalization spectra from a custom-built capture-gated composite detector. Secondly, coincident radiation measurements are used as the basis for discrimination by comparing the overall rates and time evolution of fission events when delayed neutrons are present.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Butterfly biodiversity increases with prairie strips and conservation management in row crop agriculture

Abstract Butterfly abundances are declining globally, with meta‐analysis showing a rate of −2% per year. Agriculture contributes to butterfly decline through habitat loss and degradation. Prairie strips—strips of farmland actively restored to native perennial vegetation—are a conservation practice with the potential to mitigate biodiversity loss, but their impact on butterfly biodiversity is not known. Working within a 30‐year‐old experiment that varied land use intensity, from natural areas to croplands (maize–soy–wheat rotation), we introduced prairie strips to less intensely managed crop treatments. Treatments included conservation land, biologically based (organic) row crops with prairie strips, reduced input row crops with prairie strips, no‐till row crops and conventional row crops. We measured butterfly abundance and richness: (1) within prairie strips and (2) across the gradient of land use intensity at the plot level. Butterfly abundance was higher within prairie strips than in all other treatments. Across the land use intensity gradient at the plot level, the conservation land treatment had the highest abundance, treatments with prairie strips had intermediate levels and no‐till and conventional treatments had the lowest abundances. Also across entire plots, butterfly richness increased as land use intensity decreased. Treatments with prairie strips, which also had reduced land use intensity, had distinct butterfly communities as they harboured several butterfly species that were not found in other row crop treatments. In addition to the known effects of prairie strips on ecosystem services including erosion control and increased water quality, prairie strips can increase biodiversity in multifunctional landscapes.

Kemmerling, Lindsey R.↗
DOE OSTI2020

Mechanistic Insights in Quinone-Based Zinc Batteries with Nonaqueous Electrolytes

Three quinone-based organic electrodes were tested in nonaqueous Zn-batteries using different salts and solvents. The Zn(TFSI)(2)/acetonitrile system exhibited the best performance due to its excellent transport and electrochemical properties. The mechanistic studies on the electrode kinetics were also carried out. While 2,5-dimethoxybenzoquinone (DMBQ) displayed a typical faradaic battery behavior, its polymeric derivatives showed a slow charge transfer inside the polymeric film as depicted by cyclic voltammograms. (C) 2020 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.

organic electrode, electrolyte, mechanism↗
DOE OSTI2020

Electrochemical CO 2 Utilization: Scalable System Operation for Formic Acid Production

In recent years, research into the electrochemical reduction of CO 2 has grown exponentially. Formic acid (FA) has become a particular value product from CO 2 due to its versatility [1], optimal atom economy [2], and thermodynamic favorable [3]. FA can be produced electrochemically via a direct two-electron transfer process involving CO 2 with a proton source, requiring less energy input and fewer reaction steps than the conventional Kemira process. However, product selectivity, electrode stability, and low faradic efficiency due to increased resistance under constant current, remain key issues for CO 2 reduction to FA [4]. University of Kentucky’s Center for Applied Energy Research (UK CAER) is currently investigating reactor designs to address the challenges associated with electrochemical CO 2 conversion to FA [5]. The current reactor system employs: (1) an organic-based charge carrier which shuttles charge directly to the catalyst to enable CO 2 reduction to FA; (2) novel electrode materials to mitigate large voltages and improve conductivity; and (3) a flow system which not only allows for the volumetric scale-up of both charge carrier and catalyst, but also decouples the charger carrier re-energized and FA production processes to protect the catalyst’s stability due to overpotential. Through careful adjustment of electrode, charge carrier, and electrolyte selection, cell resistances have decreased by over 15%, facilitating conduction necessary for effective CO 2 reduction to FA. The system uses a highly specific engineered catalyst, which has produced over 100 mM FA at a rate of over 10 mM FA/hour following the aforementioned electrode/charge carrier changes. System design considerations (flow rate, bulk volume) and modeling of the system will also be discussed.

20 FOSSIL-FUELED POWER PLANTS↗