SEARCH · Search NASA

Results for “oss,”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Astronomical facilities for Spacelab

Three significant Spacelab facilities which are being developed, or planned by NASA will use the 1-2 week observational capability for attached payloads on Shuttle to carry out advanced astronomical observations in the ultraviolet visible, and infrared spectral regions during the decade of the 1980s. The three facilities are expected to evolve in capability over several Shuttle flights with a final objective of protracted observational capability from a permanent facility in space with periodic servicing and/or retrieval. The three facilities are the Office of Space Science package (OSS-3/7), the Solar Optical Telescope (SOT), and the Shuttle Infrared Telescope Facility (SIRTF). The scientific and technical objectives of these astronomical facilities include both their current and projected capabilities, their use of the manned Shuttle, and their eventual disposition to a long-term facility. International aspects of the missions, including General Investigator programs, are also being planned.

Reeves, E. M.↗

NASA NTRS1983

Payload missions integration

Payload mission integration is summarized. Activities and achievements for Spacelab OSTA and OSS are discussed.

Source record↗

NASA NTRS1983

Test for contamination of MgF2 - coated mirrors

Graphs show preflight and postflight reflectivities in percent for exposed and covered mirrors carried on the OSS-1 payload pallet during STS-3. No changes greater than 1.8 sigma were observed except for a fingerprint. Weak evidence for degradation at 1216 A and 1600 A was found in several samples. There was no difference between flight mirrors and control mirrors. Covered samples suffered more than samples exposed to the Sun, but the differences are barely significant. The exposed side of the flight mirrors were somewhat dusty. No evidence was found for permanent solar-induced or shuttle-induced deterioration. There also was no evidence on oil-pumped vacuum versus oil-free vacuum during coating.

Bunner, A. N.↗

NASA NTRS1983

Vehicle charging and potential on the STS-3 mission

An electron gun with fast pulse capability was used in the vehicle charging and potential experiment carried on the OSS-1 pallet to study dielectric charging, return current mechanisms, and the techniques required to manage the electrical charging of the orbiter. Return currents and charging of the dielectrics were measured during electron beam emission and plasma characteristics in the payload bay were determined in the absence of electron beam emission. The fast pulse electron generator, charge current probes, spherical retarding potential analyzer, and the digital control interface unit which comprise the experiment are described. Results show that the thrusters produce disturbances which are variable in character and magnitude. Strong ram/wake effects were seen in the ion densities in the bay. Vehicle potentials are variable with respect to the plasma and depend upon location on the vehicle relative to the main engine nozzles, the vehicle attitude, and the direction of the geomagnetic field.

Williamson, R.↗

NASA NTRS1983

STS-3/OSS-1 Plasma Diagnostics Package (PDP) measurements of the temperature pressure and plasma

Designed to withstand the thermal extremes of the STS-3 mission through the use of heaters and thermal blankets, the plasma diagnostics package sat on the release/engagement mechanism on the OSS-1 payload pallet without a coldplate and was attached to the RMS for two extended periods. Plots show temperature versus mission elapsed time for two temperature sensors. Pressure in the range of 10 to the -3 power torr and 10 to the -7 power torr, measured 3 inches from the skin of the package is plotted against GMT during the mission. The most distinctive feature of the pressure profile is the modulation at the obit period. It was found that pressure peaks when the atmospheric gas is rammed into the cargo bay. Electric and magnetic noise spectra and time variability due to orbiter systems, UHF and S-band transmitter field strengths, and measurements of the ion spectra obtained both in the cargo bay and during experiments are plotted.

Shawhan, S. D.↗

NASA NTRS1983

Results of thermal environment measurements on the thermal cannister experiment and get away special enclosure

Because the OSS-1 pallet contained a variety of instruments with irregular surface geometry and properties which limited predictability, the total absorbed flux on thermal canister radiators was measured to determine heat rejection capability. The instrumentation and sensor cup design and locations for the thermal canister experiment are illustrated. Graphs show flux sensor history in hot and coal orbits. Kapton erosion is also considered. Results show that the flux levels measured in all STS attitudes are higher than predictions. In cold and moderate attitudes, flight results are a factor of two to three higher than predicts. In hot attitude, much better agreement occurred. It is concluded that in cold or moderate attitudes other sources may be contributing to added inputs (albedo, Earth shine, shuttle background). In hot attitude, smaller differences could be attributed to coatings assumptions or calculation uncertainty.

Ollendorf, S.↗

NASA NTRS1982

A solar flare X-ray polarimeter for the Space Shuttle

An instrument has recently been built and tested which is designed to measure the polarization of the hard (5-30 keV) X-ray emission from solar flares, and thereby to investigate the energy release mechanism and constrain flare models. In particular, these measurements will help to determine whether hard X-ray bursts are produced by nonthermal or by thermal electrons. The polarimeter makes use of the angular dependence of Thomson scattering from targets of metallic lithium. It has an energy resolution of a few keV, a time resolution of 5 s, and sufficient sensitivity to measure polarization levels (3 sigma) of a few percent in about 10 s for a moderate strength solar flare. The instrumental polarization has been directly measured and found to be within the design goal of approximately 1%. This polarimeter is scheduled to be flown as part of the OSS-1 pallet on an early Space Shuttle mission.

Lemen, J. R.↗

NASA NTRS1983

Plasma diagnostics package assessment of the STS-3 orbiter environment and systems for science

Primary objectives of the Plasma Diagnostics Package (PDP) on STS-3 as part of the OSS-1 'Pathfinder' payload were to measure aspects of the Orbiter's induced environment and to utilize Orbiter crew and subsystems in the conduct of scientific investigations. Instrumentation temperatures were found to be within predicted limits, payload bay pressure varied from ambient up to 0.001 torr with thruster firings, EMI levels were found to be below worst case estimates, and V x B motional potentials were observed to vary + or - 5 V with respect to Orbiter ground. These parameters exhibited orbit-period modulation. Payload bay plasma varied in density and composition from ambient to a rarefied mixture with Orbiter-produced H2O(+). Energetic electrons and ions with energies up to 10's of eV were observed occasionally. Primary and vernier thrusters induce a momentary perturbation to the electron density, to the pressure and to the electric field with low energy ions and electrons occasionally produced. With the PDP on the RMS, both automode and manual modes were used to seek sources of EMI, to characterize the Orbiter's plasma wake and to measure beam-plasma phenomena.

Shawhan, S. D.↗

NASA NTRS1983

Ultraviolet spectroscopy and the composition of cometary ice

A brief description of the nature of comets and of their interactions with their environments is given. Past observations are discussed, and particularly the data obtained for the West and Bradfield comets are compared. Far-ultraviolet observations are discussed in terms of the possibility of detecting the more volatile species such as H2O, CO2 and CO, which all have signatures in the ultraviolet spectral region. The comets observed by the International Ultraviolet Explorer are listed with the corresponding data. The space missions to be made in 1985-1986 are mentioned and these are the Giotto spacecraft mission, and the OSS-3 observatory that will fly aboard the Space Shuttle.

Feldman, P. D.↗

NASA NTRS1982

Approaches to environmental verification of STS free-flier and pallet payloads

This paper presents an overview of the environmental verification programs followed on an STS-launched free-flier payload, using the Tracking and Data Relay Satellite (TDRS) as an example, and a pallet payload, using the Office of Space Sciences-1 (OSS-1) as an example. Differences are assessed and rationale given as to why the differing programs were used on the two example payloads. It is concluded that the differences between the programs are due to inherent differences in the payload configuration, their respective mission performance objectives and their operational scenarios rather than to any generic distinctions that differentiate between a free-flier and a pallet payload.

Keegan, W. B.↗

NASA NTRS1982

Studies of beam plasma interactions in a space simulation chamber using prototype Space Shuttle instruments

In March, 1981, electron beam experiments were conducted in a large space simulation chamber using equipment destined to be flown aboard NASA's Office of Space Science-1 pallet (OSS-1). Two major flight experiments were involved. They include the Vehicle Charging and Potential (VCAP) experiment and the Plasma Diagnostics Package (PDP). Apparatus connected with VCAP included a Fast Pulse Electron Gun (FPEG), and a Charge and Current Probe (CCP). A preliminary view is provided of the results obtained when the electron emissions were held steady over relatively long periods of time such that steady state conditions could be obtained with respect to the electron beam interaction with the neutral gases and plasma of the vacuum chamber. Of particular interest was the plasma instability feature known as the Beam Plasma Discharge. For the present experiments the FPEG was used in a dc mode with a range of currents of 2 to 80 mA at a beam energy of 970 eV. Attention is given to the emissions of VLF and HF noise associated with the dc beam.

Banks, P. M.↗

NASA NTRS1983

Results from a 'small box' realtime molecular contamination monitor on STS-3

On the basis of early estimates of the Shuttle induced environment, Scialdone (1979) concluded that in the vicinity of the cargo, the cargo would have the largest influence on the environment. As a contamination control device, realtime monitors can indicate safe operational periods for sensitive attached payloads. It was, therefore, decided to develop the OSS-1/Contamination Monitor Package (CMP) experiment which was seen as a forerunner of an operational monitor. A description of the CMP is provided, taking into account four actively temperature controlled quartz crystal microbalances (TQCM). The TQCM temperatures could be varied from -60 C to +80 C. The sensor consisted of a matched pair of quartz crystals. The crystals were designated as a sensor and reference crystal. Results obtained during the STS-3 mission are discussed. These results show the feasibility and advantages of a small real-time contamination monitor.

Triolo, J.↗

NASA NTRS1984

Development of baseline random vibration environment criteria for Shuttle pallet payload subsystems

This paper presents a statistical evaluation of measured random vibration response data obtained from the Office of Space Science-1 (OSS-1) pallet payload. The data were measured during the acoustic test simulation (September 1980) and the ascent phase of the flight of STS-3, Orbiter 102 (launched from the Kennedy Space Center on March 22, 1982). Acoustic test efficiency factors are evaluated based on the Dynamic, Acoustic and Thermal Environments (DATE) instrumentation as the source of the measured vibration data. Test efficiency correction to test data is applied in the extrapolation of non-DATE acoustic test data to increase sample population size for improved statistical evaluation. For baseline criteria evaluation and development, data are grouped in accordance with the payload zone in which the component is mounted.

On, F. J.↗

NASA NTRS1983

Effects of chemical releases by the STS-3 Orbiter on the ionosphere

The Plasma Diagnostics Package, flown aboard STS-3 as part of the first Shuttle payload (OSS-1), recorded the effects of various chemical releases from the Orbiter. Changes in the plasma environment was observed during flash evaporator system releases, water dumps and maneuvering thruster operations. During flash evaporator operations, broadband Orbiter-generated electrostatic noise was enhanced and plasma density irregularities were observed to increase by 3 to 30 times with a spectrum which rose steeply and peaked below 6 Hz. In the case of water dumps, background electrostatic noise was enhanced at frequencies below about 3 kHz and suppressed at frequencies above 2 kHz. Thruster activity also stimulated electrostatic noise with a spectrum which peaked at approximately 0.5 kHz. In addition, ions with energies up to 1 keV were seen during some thruster events.

Pickett, J. S.↗

NASA NTRS1982

An experiment proposed and set up by the readers will be flying on board the Shuttle; these are the rules of the game; the experiments of others

The 400th round trip ticket to space via the space shuttle is booked in the name of an Italian journal. Students from that country are offered an opportunity to propose an experiment for NASA's Get Away Special program. The dimensional characteristics of the container, as specified by NASA, are given as well as limitations of weight, volume, diameter, and height for the experiment. The types of experiments in the OSS-1 payload and their operation are described.

Pazzano, P.↗

NASA NTRS1983

Development of baseline random vibration criteria for STS pallet payloads

On, F. J.↗

NASA NTRS1984

Measurements of electromagnetic interference on OV102 Columbia using the plasma diagnostics package

The third Space Shuttle mission's OSS-1 payload included 30 Hz-800 MHz and S-band receivers which assessed the intentional (transmitter) and unintentional (subsystem) EMI levels. It was noted that, at the pallet location, the UHF voice downlink transmitter field strengths did not exceed 0.1 V/m. At the remote manipulator system, the figure was 0.5 V/m. Below 300 kHz, the magnetic field noise was 30 dB pT + or - 20 dB, while the electric field noise was broadband and variable over at least 60 dB, depending on thruster firings and Orbiter attitude. This noise may have been generated by the Orbiter's interaction with the ambient plasma.

Shawhan, S. D.↗

NASA NTRS1985

Suprathermal plasma observed on STS-3 Mission by plasma diagnostics package

Artificially produced electron beams were used extensively during the past decade as a means of probing the magnetosphere, and more recently as a means of actively controlling spacecraft potential. Experimentation in these areas has proven valuable, yet at times confusing, due to the interaction of the electron beam with the ambient plasma. The OSS-1/STS-3 Mission in March 1982 provided a unique opportunity to study beam-plasma interactions at an altitude of 240 km. On board for this mission was a Fast Pulse Electron Generator (FPEG). Measurements made by the Plasma Diagnostics Package (PDP) while extended on the Orbiter RMS show modifications of the ion and electron energy distributions during electron beam injection. Observations made by charged particle detectors are discussed and related to measurements of Orbiter potential. Several of the PDP instruments, the joint PDP/FPEG experiment, and observations made during electron beam injection are described.

Paterson, W.↗