Search NASA⌕ Search

SEARCH · Search NASA

Results for “output”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Standardized multiple output power supply

A comprehensive program to develop a prototype model of a standardized multiple output power supply for use in space flight applications is described. The prototype unit was tested and evaluated to assure that the design would provide near optimum performance for the planned application. The prototype design used a dc-to-dc converter incorporating reqenerative current feedback with a time-ratio controlled duty cycle to achieve high efficiency over a wide variation of input voltage and output loads. The packaging concept uses a mainframe capable of accommodating up to four inverter/regulator modules with one common input filter and housekeeping module. Each inverter/regulator module provides a maximum of 100 watts or 10 amperes. Each module is adaptable to operate at any voltage between 4.0 volts and 108 volts. The prototype unit contains +5, + or - 15 and +28 volt modules.

Ragusa, E. V.↗
NASA NTRS1975

The probability of a correct output from a combinational circuit

The paper discusses two methods to evaluate the signal reliability of the output of logical circuits. It is known that faults present in a circuit will not always cause the output of the circuit to be incorrect. The first method evaluates the contribution of each fault to the reliability of the circuit and requires the enumeration of the behavior of each fault in the entire fault set. The use of McCluskey and Clegg's characterization of faulty networks by evaluating the functional equivalence classes of the network is a way to reduce the amount of computation involved. The second method uses a probabilistic model of logical circuits and consists of straightforward operations which can easily be automated. The method also yields the signal reliability and has the capability of very easily specifying the individual fault probabilities of all the circuit lines independently.

Ogus, R. C.↗
NASA NTRS1975

Effect of impurity doping concentration on solar cell output

Experimental measurements were made of solar cell and related photovoltaic parameters for silicon with high concentrations of dopant impurities. The cell output peaked for doping levels around 10 to the 17th power per cu cm. Independent measurements of diffusion length and open circuit voltage at high doping levels showed severe reductions at concentrations above 10 to the 18th power per cu cm. Theoretical reasons are given to explain these reductions. Indication is given of the problems requiring solution before increased cell output can be achieved at high doping levels.

Iles, P. A.↗
NASA NTRS1976

Combined GaAs laser outputs

Technique for combining outputs of array of small semiconductor lasers increases total output power while relaxing fabrication tolerances to make manufacture potentially less costly. Advantage of free-running mode is that spacing between junction-diode lasers is less critical than for conventional, phase-coherently coupled arrays.

Rutz, E. M.↗
NASA NTRS1976

Exercise cardiac output following Skylab missions - The second manned Skylab mission

Cardiac output was measured during preflight and postflight exercise-stress tests on the Skylab astronauts. In the postflight tests immediately following the 28-, 59-, and 84-d earth orbital missions, the astronauts exhibited an approximate 30% decrease in cardiac output coupled with an approximate 50% decrease in cardiac stroke volume during exercise. These changes were accompanied by elevated heart rates and significant increases in total systemic peripheral vascular resistance. Mean arterial pressure was unchanged. All parameters returned to normal preflight values within 30 d of the end of the orbital period. Duration of the zero-G exposure did not appear to influence either the magnitude of the hemodynamic changes or the time-course of their return to normal. These results are discussed in relation to other cardiovascular findings and possible mechanisms responsible for the observations are outlined.

Buderer, M. C.↗
NASA NTRS1976

Description and expected performance of flight-model, 12-gigahertz, output stage tube for the communications technology satellite

The flight model output stage tube for the Communications Technology Satellite is described. The output stage tube is a 12-GHz, 200-W, coupled cavity traveling wave tube. The tube has a multistage depressed collector for efficiency enhancement. Collector cooling is accomplished by direct radiation to space. Expected rf performance and factors affecting on orbit performance and life are discussed.

Chomos, G. J.↗
NASA NTRS1976

Static inverter with synchronous output waveform synthesized by time-optimal-response feedback

Time-optimal-response 'bang-bang' or 'bang-hang' technique, using four feedback control loops, synthesizes static-inverter sinusoidal output waveform by self-oscillatory but yet synchronous pulse-frequency-modulation (SPFM). A single modular power stage per phase of ac output entails the minimum of circuit complexity while providing by feedback synthesis individual phase voltage regulation, phase position control and inherent compensation simultaneously for line and load disturbances. Clipped sinewave performance is described under off-limit load or input voltage conditions. Also, approaches to high power levels, 3-phase arraying and parallel modular connection are given.

Kernick, A.↗
NASA NTRS1977

Control logic to track the outputs of a command generator or randomly forced target

A procedure is presented for synthesizing time-invariant control logic to cause the outputs of a linear plant to track the outputs of an unforced (or randomly forced) linear dynamic system. The control logic uses feed-forward of the reference system state variables and feedback of the plant state variables. The feed-forward gains are obtained from the solution of a linear algebraic matrix equation of the Liapunov type. The feedback gains are the usual regulator gains, determined to stabilize (or augment the stability of) the plant, possibly including integral control. The method is applied here to the design of control logic for a second-order servomechanism to follow a linearly increasing (ramp) signal, an unstable third-order system with two controls to track two separate ramp signals, and a sixth-order system with two controls to track a constant signal and an exponentially decreasing signal (aircraft landing-flare or glide-slope-capture with constant velocity).

Trankle, T. L.↗
NASA NTRS1977

Spacelab output processing system architectural study

Two different system architectures are presented. The two architectures are derived from two different data flows within the Spacelab Output Processing System. The major differences between these system architectures are in the position of the decommutation function (the first architecture performs decommutation in the latter half of the system and the second architecture performs that function in the front end of the system). In order to be examined, the system was divided into five stand-alone subsystems; Work Assembler, Mass Storage System, Output Processor, Peripheral Pool, and Resource Monitor. The work load of each subsystem was estimated independent of the specific devices to be used. The candidate devices were surveyed from a wide sampling of off-the-shelf devices. Analytical expressions were developed to quantify the projected workload in conjunction with typical devices which would adequately handle the subsystem tasks. All of the study efforts were then directed toward preparing performance and cost curves for each architecture subsystem.

Source record↗
NASA NTRS1978

Eigenvalue/eigenvector assignment using output feedback

The problem of pole-assignment in a linear time-invariant multivariable system using output feedback is considered. New sufficient conditions are derived to assign an almost arbitrary set of min (n, m+r-1) distinct eigenvalues, where n, m, and r are the number of states, inputs, and outputs, respectively. The analysis also highlights the freedom in selection of closed-loop eigenvectors which can be used for response shaping.

Srinathkumar, S.↗
NASA NTRS1978

Temperature dependence of optically dumped far-infrared (FIR) laser output power

The temperature dependence of the small signal gain and saturation power are derived using temperature-dependent rates in a four-level model. An expression is developed for the output power of a far-infrared oscillator as a function of temperature for both fixed pressure and fixed density. The results are valid in the regime of homogeneous broadening of the rotational transition and Doppler broadening of the pump transition. It is shown that, for most lasers, both the small signal gain and the saturation power decrease with increasing temperature. These effects have the overall result of increasing output power with decreasing temperatures.

Lawandy, N. M.↗
NASA NTRS1979

Temperature dependence of optically pumped far-infrared /FIR/ laser output power

The temperature dependence of the small signal gain and saturation power are derived using temperature-dependent rates in a four-level model. An expression is developed for the output power of a far-infrared oscillator as a function of temperature for both fixed pressure and fixed density. The results are valid in the regime of homogeneous broadening of the rotational transition and Doppler broadening of the pump transition. It is shown that, for most lasers, both the small signal gain and the saturation power decrease with increasing temperature. These effects have the overall result of increasing output power with decreasing temperatures.

Lawandy, N. M.↗
NASA NTRS1980

The correlation of the output of a binary convolutional encoder

In this paper we discuss the correlation properties of the output of a binary convolutional encoder. We consider both random statistically independent inputs and first-order Markov inputs. It is shown that for random inputs, the ensemble average of the product of the outputs of a convolutional encoder taken two at a time is always either 0 or 1, and that for almost all good codes the ensemble average is always 0.

Braff, M.↗
NASA NTRS1980

Radiative energy output of the 5 September 1973 flare

Measurements of the radiative energy output of the solar flare of Sept. 5, 1973, over a wavelength range of more than ten decades, from below 1 A to above 1 m are presented. Observations of soft X-rays (0.5-20 A), XUV and EUV lines (171-1863 A) and EUV continua (1400-1960 A), H alpha radiation, visible lines and continua (3700-8700 A) and radio emission (centimeter to meter wavelengths) were obtained concurrently by Skylab and ground-based instruments. Estimates of power output at flare maximum are obtained for the observed wavelengths with uncertainty of at least half an order of magnitude, due to corresponding uncertainties in EUV and visible fluxes. Taking into account energy radiated at unobserved wavelengths and the characteristic time of the best-reduced data (the soft X-ray), calculations indicate a total radiated flare energy of approximately 4 x 10 to the 29th erg.

Canfield, R. C.↗
NASA NTRS1980

Output of acoustical sources

Acoustic radiation from a source, here viewed as an immobile point singularity with periodic strength and a given multipolar nature, is affected by the presence of nearly structural elements (e.g., rigid or impedance surfaces) as well as that of a background flow in the medium. An alternative to the conventional manner of calculating the net source output by integrating the energy flux over a distant control surface is described; this involves a direct evaluation of the secondary wavefunction at the position of the primary source and obviates the need for a (prospectively difficult) flux integration. Various full and half-planar surface configurations with an adjacent source are analyzed in detail, and the explicit results obtained, in particular, for the power factor of a dipole brings out a substantial rise in its output as the source nears the sharp edge of a half-plane.

Levine, H.↗
NASA NTRS1980

Thermionic converter output as a function of collector temperature

Surprisingly few data are available on the variation of thermionic converter output with collector temperature. In this study the output power density has been measured as a function of collector temperature (at a fixed emitter temperature of 1650 K) for six converters with different electrode combinations. Collector temperatures ranged from 750 to 1100 K. For collector temperatures below 900 K, converters built with sublimed molybdenum oxide collectors gave the best performance.

Stark, G.↗