Search NASA⌕ Search

SEARCH · Search NASA

Results for “planar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Vibration suppression of planar truss structures utilizing uniform damping control

A variety of methods has been devised for vibrational control of a structure using both passive and active controls. Presented in this paper is a relatively new method for vibration suppression, uniform damping control. This method consists of implementing a control law which tends to dampen each vibrational mode of the structure at the same desirable exponential rate. The unique aspects of this method are that the control law is not explicitly dependent on the structural stiffness, the control forces are directly proportional to the distribution of the structural mass, and the control law is natural and decentralized. The control law was applied to a flexible planar truss structure and the various aspects of implementation of the control law examined are: actuator/sensor number, placement, and the impact of the actuator/sensor number and placement on the necessary control 'power' requirements such as peak power loads, total power requirements, etc. Also examined are the effects of using a limited number of active members in terms of the vibrational performance when compared with the 'ideal' distributed control law.

Andersen, G. C.↗
NASA NTRS1987

A ten-element array of individually addressable channeled-substrate-planar AlGaAs diode lasers

The fabrication of arrays of channeled-substrate-planar (CSP) AlGaAs diode lasers which emit up to 150 mW CW in a single spatial mode and are applicable to mulitchannel optical recording systems is described. The CSP diode lasers are incorporated in ten-array geometry, and each array is 1.95 nm in width and 100 microns in thickness and is cleaved to have a cavity length of 200 microns and coated to produce 90-percent reflectivity on the back facet and 10-percent reflectivity on the front facet. The array is attached to a thermoelectrically cooled submount. The optical output power versus input current characteristics for the array are evaluated, and the lateral far-field intensity profiles for each of the lasers (at 30 mW CW) and CW spectra of the lasers are analyzed.

Carlin, D. B.↗
NASA NTRS1987

Superconductivity above 90 K in the square-planar compound system ABa2Cu3O(6 + x) with A = Y, La, Nd, Sm, Eu, Gd, Ho, Er, and Lu

Superconductivity has been found in the 90-K range in ABa2Cu3O(6 + x) with A = La, Nd, Sm, Eu, Gd, Ho, Er, and Lu in addition to Y. The results suggest that the unique square-planar Cu atoms, each surrounded by four or six oxygen atoms, are crucial to the superconductivity of oxides in general. In particular, the high Tc of ABa2Cu3O(6 + x) is attributed mainly to the quasi-two-dimensional assembly of the CuO2-Ba-CuO(2 + x)Ba-CuO2 layers sandwiched between two A layers, with particular emphasis in the CuO(2 + x) layers. Higher-Tc oxides are predicted for compounds with bigger assemblies of CuO2 layers coupled by Ba layers.

Hor, P. H.↗
NASA NTRS1987

Intrusions in the active layer of channeled-substrate-planar laser diodes

Channeled-substrate-planar laser diodes from various wafers were observed to develop a node or dark spot in their near-field patterns after failure during lifetesting. 'Node' devices from each wafer were angle-lapped and stained in an attempt to uncover a physical mechanism for this common failure symptom. Optical microscopic examination of the beveled cross sections revealed that an intrusion, in the form of a spike at the tip of the zinc diffusion front, had penetrated into the active layer of these diodes. The node observed in the near-field pattern appears to be in a position correspondig to the location of the spike in the active region. In addition, cathodoluminescence measurements on other 'node' diodes revealed a dark line region approximately 2-micron-wide running parallel to and in the middle of the 5-micron contact stripe. It is believed that this dark line region is representative of an area of nonradiative recombination which occurs in the portion of the active layer containing the intrusion.

Slavin, S. E.↗
NASA NTRS1987

Analysis of Martian ionosphere and solar wind electron gas data from the planar retarding potential analyzer on the Viking spacecraft

Approximate expressions for the electron current collected by a planar retarding potential analyzer (RPA) mounted on a moving, conducting, charged spacecraft are derived. They are utilized for the analysis of electron current data obtained by the RPAs on the Viking spacecraft in the ionosphere of Mars and in the disturbed and undisturbed solar wind near this planet. It is shown that contamination currents by photoelectrons emitted from the spacecraft can be distinguished and removed from the signal. Parameters deduced from the analysis of RPA electron sampling data are the multicomponent electron temperatures, the number densities, and the spacecraft potential.

Mantas, G. P.↗
NASA NTRS1987

Exact image method for Gaussian beam problems involving a planar interface

Exact image method, recently introduced for the solution of electromagnetic field problems involving sources above a planar interface or two homogeneous media, is shown to be valid also for sources located in complex space, which makes its application possible for Gaussian beam analysis. It is demonstrated that the Goos-Hanchen shift and the angular shift of a TE polarized beam are correctly given as asymptotic results by the exact reflection image theory. Also, the apparent image location giving the correct Gaussian beam transmitted through the interface is obtained as another asymptotic check. The present theory makes it possible to calculate the exact coupling from the Gaussian beam to the reflected and refracted beams, as well as to the surface wave.

Lindell, I. V.↗
NASA NTRS1988

Planar thin film SQUID with integral flux concentrator

A thin film SQUID is disclosed having improved flux concentration combined with simplicity of design and fabrication. The SQUID starts with a wafer like substrate having simple planar geometry. A large area of superconducting film is coated on the substrate, with a small open or uncoated area remaining at its center to define a SQUID loop, and a gap in the film formed, beginning at the outer circumferential edge of the substrate and extending radially inward to the open area. A Josephson junction is formed across the gap near the open area to interrupt the electrical continuity of the SQUID loop. A coil is attached to the surface of the substrate, electrically insulated from the superconducting film, and is energized to induce flux within the SQUID which is concentrated within the open area.

Peters, Palmer N.↗
NASA NTRS1987

Advanced planar array development for space station

The results of the Advanced Planar Array Development for the Space Station contract are presented. The original objectives of the contract were: (1) to develop a process for manufacturing superstrate assemblies, (2) to demonstrate superstrate technology through fabrication and test, (3) to develop and analyze a preliminary solar array wing design, and (4) to fabricate a wing segment based on wing design. The primary tasks completed were designing test modules, fabricating, and testing them. LMSC performed three tasks which included thermal cycle testing for 2000 thermal cycles, thermal balance testing at the Boeing Environmental Test Lab in Kent, Washington, and acceptance testing a 15 ft x 50 in panel segment for 100 thermal cycles. The surperstrate modules performed well during both thermal cycle testing and thermal balance testing. The successful completion of these tests demonstrate the technical feasibility of a solar array power system utilizing superstrate technology. This final report describes the major elements of this contract including the manufacturing process used to fabricate modules, the tests performed, and the results and conclusions of the tests.

Source record↗
NASA NTRS1987

Observations and consequences of nonuniform aluminum concentrations in the channel regions of AlGaAs channeled-substrate-planar lasers

Compositional changes in the n-clad layer within the channel region of channel substrate planar (CSP) type semiconductor lasers have been observed. As a consequece, a large optical cavity (LOC) or an enhanced substrate loss (ESL) version of the CSP geometry may result, both of which may have significantly different characteristics from those of a conventional CSP laser. The CSP-LOC generally has a larger near-field spot size, while the ESL-CSP is characterized by an off-axis, asymmetric far-field pattern.

Evans, Gary A.↗
NASA NTRS1987

Self-consistent analysis of gain saturation in channeled-substrate-planar double-heterojunction lasers

A self-consistent model for semiconductor lasers (using the channeled-substrate-planar (CSP) double-heterojunction (DH) laser as an example) which does not assume constant optical power along the laser axis is developed. This approach allows for the analysis of high-power lasers with low facet reflectivities which produce nonuniform photon densities along the propagation direction. Analytical equations for the modal gain coefficient, the threshold current density, and the radiated power for a specific CSP laser structure are obtained.

Butler, Jerome K.↗
NASA NTRS1987

Exact-image method for Gaussian-beam problems involving a planar interface

The exact-image method, recently introduced for the solution of electromagnetic field problems involving sources above a planar interface between two homogeneous media, is shown to be valid also for sources located in complex space, which makes its application possible for Gaussian-beam analysis. It is demonstrated that the Goos-Hanchen shift and the angular shift of a TE-polarized beam are correctly given as asymptotic results by the exact-reflection-image theory. Also, the apparent-image location giving the correct Gaussian beam transmitted through the interface is obtained as another asymptotic check. The theory described here makes it possible to calculate the exact coupling from the Gaussian beam to the reflected and refracted beams as well as to the surface wave.

Lindell, Ismo V.↗
NASA NTRS1987

Dynamics and control of a planar truss actuator

The concept of using an active truss actuator to control the vibration of a flexible (space) structure has been investigated. The actuator with a generic beam continuum cantilevered from it has been modeled using energy methods. A time-invariant optimal state feedback scheme was utilized for the control method. A digital simulation of the system dynamic response demonstrated the good vibration control possibilities for the (planar) truss actuator on a large flexible space structure.

Lovejoy, V. D.↗
NASA NTRS1988

Lateral optical confinement of channeled-substrate-planar lasers with GaAs/AlGaAs substrates

A physical explanation of the lateral guiding mechanism in channeled-substrate-planar (CSP) lasers based on the amount of wavefront tilt of the transverse field outside the channel region is presented. Because of this inherent wavefront tilt, all CSP lasers will have a very slight asymmetry in their transverse far-field pattern. The nature of the guiding mechanism does not require light absorption by the substrate. Design curves showing the complex lateral effective index step as a function of n-clad thickness with the active layer as a parameter are also presented. Depending on the specific layer compositions and thicknesses, the CSP guiding mechanism can provide a positive lateral index step for substrates with mole fractions of AlAs ranging from 0 to higher than 0.2.

Evans, Gary A.↗
NASA NTRS1988

CSDUST3 - A radiation transport code for a dusty medium with 1-D planar, spherical or cylindrical geometry

The program solves the radiation transport problem in a dusty medium with one-dimensional planar, spherical or cylindrical geometry. It determines self-consistently the effects of multiple scattering, absorption, and re-emission of photons on the temperature of dust grains and the characteristics of the internal radiation field. The program can treat radiation field anisotropy, linear anisotropic scattering, and multi-grain components. The program output consists of the dust-temperature distribution, flux spectrum, surface brightness at each frequency and the observed intensities (involving a convolution with a telescope beam pattern).

Egan, Michael P.↗
NASA NTRS1988

Efficient AlGaAs channeled-substrate-planar distributed feedback laser

A wavelength-locked, AlGaAs channeled-substrate-planar distributed feedback laser has been made that operates to 40 mW pulsed. The Bragg grating is situated at the shoulders of the layers of AlGaAs and GaAs. Overall power efficiencies of 15 percent have been measured at 40 mW of output power.

Goldstein, B.↗
NASA NTRS1989

Chaotic Motion Of A Two-Link Planar Mechanism

Report discusses global instability in orbital motion of two-link planar mechanism. Principal objective, contributes to understanding of chaotic motions in robot manipulators and other deterministic mechanical systems. Discussion begins with brief review of previous studies of chaotic motion and introduces notion of orbital instability in nonlinear systems. Introduces geometric approach useful in representation of orbital instability.

Lokshin, Anatoly↗
NASA NTRS1988

Planar and finger-shaped optical tactile sensors for robotic applications

Progress is described regarding the development of optical tactile sensors specifically designed for application to dexterous robotics. These sensors operate on optical principles involving the frustration of total internal reflection at a waveguide/elastomer interface and produce a grey-scale tactile image that represents the normal (vertical) forces of contact. The first tactile sensor discussed is a compact, 32 x 32 planar sensor array intended for mounting on a parallel-jaw gripper. Optical fibers were employed to convey the tactile image to a CCD camera and microprocessor-based image analysis system. The second sensor had the shape and size of a human fingertip and was designed for a dexterous robotic hand. It contained 256 sensing sites (taxels) distributed in a dual-density pattern that included a tactile fovea near the tip measuring 13 x 13 mm and containing 169 taxels. The design and construction details of these tactile sensors are presented, in addition to photographs of tactile imprints.

Begej, Stefan↗
NASA NTRS1988

High-power 0.87-micron channel substrate planar lasers for spaceborne communications

High-power single-mode channeled-substrate planar AlGaAs diode lasers are being developed for reliable high-power operation for use as sources in spaceborne optical communication systems. The CSP laser structure has been optimized for operation at an emission wavelength of 870 nm. Such devices have exhibited output powers in excess of 80 mW CW at an operating temperature of 80 C.

Connolly, J. C.↗