Search NASA⌕ Search

SEARCH · Search NASA

Results for “plane wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Evaporated Se x Te 1-x Thin Films with Tunable Bandgaps for Short-Wave Infrared Photodetectors

Semiconducting absorbers in high-performance short-wave infrared (SWIR) photodetectors and imaging sensor arrays are dominated by single-crystalline germanium and III-V semiconductors. However, these materials require complex growth and device fabrication procedures. In this work, thermally evaporated Se x Te 1- x alloy thin films with tunable bandgaps for the fabrication of high-performance SWIR photodetectors are reported. From absorption measurements, it is shown that the bandgaps of Se x Te 1- x films can be tuned continuously from 0.31 eV (Te) to 1.87 eV (Se). Owing to their tunable bandgaps, the peak responsivity position and photoresponse edge of Se x Te 1- x film-based photoconductors can be tuned in the SWIR regime. By using an optical cavity substrate consisting of Au/Al 2 O 3 to enhance its absorption near the bandgap edge, the Se 0.32 Te 0.68 film (an optical bandgap of ≈0.8 eV)-based photoconductor exhibits a cut-off wavelength at ≈1.7 μm and gives a responsivity of 1.5 AW -1 and implied detectivity of 6.5 × 10 10 cm Hz 1/2 W -1 at 1.55 μm at room temperature. Importantly, the nature of the thermal evaporation process enables the fabrication of Se 0.32 Te 0.68 -based 42 × 42 focal plane arrays with good pixel uniformity, demonstrating the potential of this unique material system used for infrared imaging sensor systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Neutron polarization analysis of the anisotropic spin wave excitations in multiferroic BiFeO 3

A multiferroic material BiFeO 3 shows a cycloidal spin structure below 640 K. Anisotropy of the magnetic excitations below 6 meV was previously studied using neutron polarization analysis (Zhang et al. 2022 Phys. Rev. B 105 144426). The magnetic excitations in and out of the cycloidal plane were separated and compared to those calculated based on the linear spin-wave theory. The overall feature of the observed excitations was found to be consistent with those calculated. Further polarized neutron study with extended energy range has been performed. The anisotropy of the magnetic excitations is present at least up to 15 meV. The out-of-plane mode is constantly more intense by ~50% than the in-plane mode in the energy range between 3 and 15 meV. The anisotropic excitations in the wide energy range are unexpected since multiple in-plane and out-of-plane modes are mixed at higher energies and the excitations are expected to become more isotropic.

Matsuda, Masaaki↗
DOE OSTI2022

Anisotropic spin-wave excitations in multiferroic BiFeO 3

Polarized inelastic neutron-scattering experiments have been performed to elucidate the anisotropic behavior of the low-energy spin-wave excitations in a multiferroic BiFeO 3 , which shows a cycloidal spin structure below 640 K. Using neutron polarization analysis for single magnetic domain crystals, magnetic excitation modes in and out of the cycloidal plane below 6 meV were separated successfully. The magnetic excitation spectra were analyzed using linear spin-wave theory. The low-energy magnon density of states consist of several magnon modes, including the two anisotropic modes, Φ and Ψ modes, distributed in and out of the cycloidal plane, respectively, which were previously observed using optical spectroscopies. Furthermore, there are other magnon modes that are not active in optical measurements. Additionally, a model spin Hamiltonian, which reproduces the spin-wave frequencies observed using optical spectroscopies, explains the overall spectra reasonably well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin Waves and Magnetic Exchange Hamiltonian in CrSBr

Abstract CrSBr is an air‐stable two‐dimensional (2D) van der Waals semiconducting magnet with great technological promise, but its atomic‐scale magnetic interactions—crucial information for high‐frequency switching—are poorly understood. An experimental study is presented to determine the CrSBr magnetic exchange Hamiltonian and bulk magnon spectrum. The A ‐type antiferromagnetic order using single crystal neutron diffraction is confirmed here. The magnon dispersions are also measured using inelastic neutron scattering and rigorously fit the excitation modes to a spin wave model. The magnon spectrum is well described by an intra‐plane ferromagnetic Heisenberg exchange model with seven nearest in‐plane exchanges. This fitted exchange Hamiltonian enables theoretical predictions of CrSBr behavior: as one example, the fitted Hamiltonian is used to predict the presence of chiral magnon edge modes with a spin‐orbit enhanced CrSBr heterostructure.

2D materials↗
DOE OSTI2025

All-alumina quarter-wave plate coatings fabricated by glancing angle deposition using serial bideposition

Anisotropic phase retarders, used in high power laser facilities to perform polarization smoothing, can be obtained by the glancing angle deposition (GLAD) coating process. Due to its high laser resistance, the coatings are mainly made of silica. Therefore, limited attention has been given to other dielectric materials. Here we present a study on alumina GLAD anisotropic coatings; a material with high laser resistance, higher birefringence and lower environmental sensitivity than silica. Since the anisotropy is related to the coatings microstructure through the deposition angle, samples were coated at angles varying from ± 68° to ± 82° using the serial bideposition technique. They were characterized by ellipsometry, polarimetry, spectrophotometry and electron microscopy. We showed that the highest birefringence is obtained at a deposition angle of ± 76° with an in-plane value of 0.053. Based on these results, a quarter-wave plate at 351 nm was designed as a multilayer with seven pairs of anisotropic layers deposited at ± 76° and isotropic layers deposited at 0°. The fabricated coating exhibited a uniform retardance of 88.51 ± 0.45 nm. The alumina GLAD wave plates presented here, open the door to new possibilities in the laser field and especially in the field of fusion energy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes

The Simons Observatory (SO) is a cosmic microwave background survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of σ(r) = 0.002, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35° field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and <0.1 K focal plane that holds >12,000 transition edge sensor detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Solid-phase heteroepitaxy of oriented Sb 2 Se 3 on GaAs for birefringent thin films

Here, we investigate the amorphous-to-crystalline transformation of antimony selenide (Sb 2 Se 3 ) on UHV-prepared GaAs (001) substrates. In the bulk orthorhombic form, Sb 2 Se 3 is a layered quasi-1D semiconductor with highly anisotropic properties of interest for optical and electronic devices. We find that an amorphous layer deposited by molecular beam epitaxy annealed at or above 230 °C yields a textured-epitaxial structure among some randomly oriented domains. The textured-epitaxial Sb 2 Se 3 grains are oriented with the covalently bonded “1D axis” constrained in-plane to GaAs [110] and with multiple van der Waals (hk0) orientations out-of-plane. The same texture was achieved exclusively without randomly oriented grains using continuous-wave laser radiation, highlighting the use of thermal and optical methods to yield anisotropic crystalline Sb 2 Se 3 films directly from the amorphous phase. Polarized reflectance and polarized microscopy confirm the unique state of in-plane birefringence in the crystallized thin film. Overall, we show that solid-phase heteroepitaxy provides additional pathways to the integration of low-symmetry chalcogenide semiconductors for demanding applications where the inherent anisotropy needs to be preserved.

Xiao, Kelly [Stanford Univ., CA (United States)] (↗
DOE OSTI2026

A 3D-Printed Millimeter-Wave Inline Waveguide-to-Coplanar-Waveguide Transition to Enable Dense Spectrometer Arrays for Intensity Mapping Surveys

We present a 3D-printed millimeter-wave, octave-bandwidth, in-line waveguide-to-coplanar-waveguide transition designed to enable focal planes with dense arrays of on-chip spectrometers. These arrays will enable compelling surveys of the large-scale structure of the universe through millimeter-wave intensity mapping. The transition consists of a four-step ridge-waveguide transformer that couples light from a rectangular waveguide onto a coplanar waveguide via an electrical connection made with indium bump bonds. We develop a tolerance-aware optimization approach to identify high-performance transition geometries that are robust to manufacturing variations; the same formulation can be applied to other tolerance-sensitive design problems. We also describe the implementation of a custom apparatus and procedure for bump-bonding a silicon chip to a metallized 3D-printed component. We detail the fabrication of the coplanar waveguide chip and three-dimensional waveguide structure, simulations and metrology of a test device, and room temperature reflectance measurements of this device. The room temperature metrology and reflection measurements are consistent with a model that predicts a coupling efficiency of $\mathord{\sim} 95\%$ at cryogenic temperatures in the 85-170 GHz frequency range.

Stover, Austin [Chicago U.; Chicago U., KICP] (ORC↗
DOE OSTI2026

Observation of spin‑wave altermagnetic splitting in MnF2

-Contents of the Data Repository: - Polarized neutron diffraction data acquired in the (HK0) scattering plane. - Inelastic neutron scattering (INS) data from both unpolarized and polarized measurements with an incident neutron energy of Ei =9 meV.- - Reduced multidimensional single-crystal datasets (MDE) and corresponding S(Q,ω) slices used to generate all figures presented in the manuscript. - Julia source code and supporting input files used for spin-wave calculations, model fitting, and simulation of neutron scattering intensity maps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electronic Structure of Excitons in Hematite Fe 2 O 3

We present a computational study of the electronic structure of excitons in hematite Fe 2 O 3 using density functional theory (DFT) and time-dependent DFT theory. Excitons resulting from solar light absorption are precursors to photogenerated charge carriers, which are the active species in solar-to-fuel redox conversions. Upon vertical excitation, the lowest energy exciton is found to have a multideterminantal wave function, describing an electron excited from O 2p states to Fe 3d states of the nearest basal plane, possibly supporting a recent XUV-derived exciton structure with a radius of a single Fe–O bond. Subsequently, the exciton self-traps into stable electron–hole pair structures whose wave functions are well-approximated by single excitations conveniently labeled “HOMO–LUMO”. Self-trapping yields electron–hole pair structures whereby the electron state (electron polaron-like) is separated from the hole state (hole polaron-like) by 3, 5, 7, 9, ... basal planes in structures referred to as Exc-3, Exc-5, Exc-7, Exc-9, ... The natural transition orbitals (electron–hole states) exhibit a strong “localized” character. The hole state is best described as a (FeO 6 ) + octahedral moiety carrying ~0.65 h + charge, and overall ~70% of the hole is assigned to O 2p atomic states, mostly on the four (4) equatorial O atoms of the moiety. The electron state is best described as a (FeFe) – moiety carrying ~0.80 e – charge in Fe 3d atomic states. The lattice distortions around the hole site exhibit Fe–O bond shortening due to the removal of electron density from an orbital state with O–Fe–O antibonding character. The electron site shows Fe–Fe distance shortening due to excess electron density added to an orbital state with in-phase Fe–Fe interactions. Furthermore, these excitonic structures with increasing electron–hole separation can be viewed as the onset of exciton separation into isolated electrons and hole polarons.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dispersion curve regression – assisted wideband local wavenumber analysis for characterizing three-dimensional (3D) profile of hidden corrosion damage

Corrosion as common damage in civil, petrochemical, nuclear, and aerospace structures affects the integrity and safety of the structures and may lead to catastrophic failures. This paper presents dispersion curve regression-assisted local wavenumber analysis method, which can analyze the time–space wavefield containing wideband information of wave-damage interaction and further extract the structural information carried by such wavefield for characterizing hidden corrosion damage in an isotropic plate. To acquire the time–space wavefield, a noncontact scanning laser Doppler vibrometer is used. In our analysis method, the acquired time–space wavefield is firstly processed to generate a local wavenumber function. The derived wavenumber function is further analyzed with a dispersion curve regression step, which searches in a set of theoretical frequency-wavenumber dispersion curves for different plate thicknesses and identifies the optimal plate thickness whose theoretical curve best matches the frequency-wavenumber relation contained in the local wavenumber function. By this means, a 3D profile including both in plane and thickness dimensions of the structure can be constructed for corrosion visualization and quantification. The experimental study demonstrates that our method can quantify the profile of hidden uniform corrosion in metal plates in terms of its in-plane shape and size as well as its out-of-plane depth in the subwavelength scale. Moreover, compared to previous Lamb wave-based corrosion inspection methods, our technique allows for noncontact 3D characterization of hidden corrosion from a far distance to the structure. Finally, we believe this work will inspire new 3D damage quantification methods that are based on wavefield analysis as well as enable potential applications for the quantification of hidden corrosion in civil, petrochemical, nuclear, and aerospace structures.

42 ENGINEERING↗
DOE OSTI2021

Helical magnetic order and Fermi surface nesting in noncentrosymmetric ScFeGe

Here, an investigation of the structural, magnetic, thermodynamic, and charge transport properties of noncentrosymmetric hexagonal ScFeGe reveals it to be an anisotropic metal with a transition to a weak itinerant incommensurate helimagnetic state below T N =36 K. Neutron diffraction measurements discovered a temperature and field independent helical wave vector k = (0 0 0.193) with magnetic moments of 0.53 μ B per Fe confined to the ab-plane. Density functional theory calculations are consistent with these measurements and find several bands that cross the Fermi level along the c-axis with a nearly degenerate set of flat bands just above the Fermi energy. The anisotropy found in the electrical transport is reflected in the calculated Fermi surface, which consists of several warped flat sheets along the c-axis with two regions of significant nesting, one of which has a wave vector that closely matches that found in the neutron diffraction. The electronic structure calculations, along with a strong anomaly in the c-axis conductivity at TN, signal a Fermi surface driven magnetic transition, similar to that found in spin density wave materials. Magnetic fields applied in the ab-plane result in a metamagnetic transition with a threshold field of ≈ 6.7 T along with a sharp, strongly temperature dependent discontinuity and a change in sign of the magnetoresistance for in-plane currents. Thus, ScFeGe is an ideal system to investigate the effect of in-plane magnetic fields on a helimagnet with a c-axis propagation vector, where the relative strength of the magnetic interactions and anisotropies determine the topology and magnetic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Secular Outflows from Long-Lived Neutron Star Merger Remnants

We study mass ejection from a binary neutron star merger producing a long-lived massive neutron star remnant with general-relativistic neutrino-radiation hydrodynamics simulations. In addition to outflows generated by shocks and tidal torques during and shortly after the merger, we observe the appearance of a wind driven by spiral density waves in the disk. This spiral-wave-driven outflow is predominantly located close to the disk orbital plane and have a broad distribution of electron fractions. At higher latitudes, a high electron-fraction wind is driven by neutrino radiation. The combined nucleosynthesis yields from all the ejecta components is in good agreement with Solar abundance measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Comparative analysis of plasmon modes in layered Lindhard metals and strange metals

The enigmatic strange metal remains one of the central unsolved problems of 21st century science. Understanding this phase of matter requires knowledge of the momentum- and energy-resolved dynamic charge susceptibility 𝜒⁡(𝑞,𝜔), especially at finite momentum. Inelastic electron scattering (EELS), performed in either transmission or reflection geometry, is a powerful probe of 𝜒⁡(𝑞,𝜔). For the prototypical strange metal Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝑥 , transmission- and reflection EELS, and infrared (IR) spectroscopy agree at 𝑞∼0, all revealing a highly damped plasmon near 1 eV. At larger 𝑞, however, EELS results show unresolved discrepancies. Since IR data are highly reproducible, it is advantageous to use IR data to calculate what the expected EELS response should be at modest 𝑞. Building on prior momentum-resolved reflection geometry M-EELS work [Chen et al., Phys. Rev. B 109, 045108 (2024)], we extend this approach to transmission EELS for finite stacks of metallic layers, comparing a “textbook” Lindhard metal to a strange metal. In the Lindhard case, the low-𝑞 response is dominated by long-lived, standing wave plasmon modes arising from interlayer Coulomb coupling, with in-plane dispersions that resemble the well-known Fetter modes of layered metals. This behavior depends only on the geometry and the long-range nature of the Coulomb interaction and is largely insensitive to layer details. At larger 𝑞, the response reflects the microscopic properties of individual layers. For the strange metal, calculations based on IR data predict a highly damped plasmon with weak dispersion and no distinct surface mode. While our results match IR and M-EELS at low 𝑞, they do not reproduce any published EELS spectra at large 𝑞, highlighting unresolved discrepancies that demand further experimental investigation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Incommensurate Spin Fluctuations in the Spin-Triplet Superconductor Candidate UTe 2

Spin-triplet superconductors are of extensive current interest because they can host topological state and Majorana fermions important for quantum computation. The uranium-based heavy-fermion superconductor UTe 2 has been argued as a spin-triplet superconductor similar to UGe2, URhGe, and UCoGe, where the superconducting phase is near (or coexists with) a ferromagnetic (FM) instability and spin-triplet electron pairing is driven by FM spin fluctuations. Here we use neutron scattering to show that, although UTe 2 exhibits no static magnetic order down to 0.3 K, its magnetism in the [0,K,L] plane is dominated by incommensurate spin fluctuations near an antiferromagnetic ordering wave vector and extends to at least 2.6 meV. We are able to understand the dominant incommensurate spin fluctuations of UTe 2 in terms of its electronic structure calculated using a combined density-functional and dynamic mean-field theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Low-energy quasi-circular electron correlations with charge order wavelength in Bi 2 Sr 2 CaCu 2 O 8+δ

Most resonant inelastic x-ray scattering (RIXS) studies of dynamic charge order correlations in the cuprates have focused on the high-symmetry directions of the copper oxide plane. However, scattering along other in-plane directions should not be ignored as it may help understand, for example, the origin of charge order correlations or the isotropic scattering resulting in strange metal behavior. Our RIXS experiments reveal dynamic charge correlations over the qx-qy scattering plane in underdoped Bi 2 Sr 2 CaCu 2 O 8+δ . Tracking the softening of the RIXS-measured bond-stretching phonon, we show that these dynamic correlations exist at energies below approximately 70 meV and are centered around a quasi-circular manifold in the q x -q y scattering plane with radius equal to the magnitude of the charge order wave vector, q CO . This phonon-tracking procedure also allows us to rule out fluctuations of short-range directional charge order (i.e., centered around [q x = ±q CO , q y = 0] and [q x = 0, q y = ±q CO ]) as the origin of the observed correlations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spin Wave Excitations in Honeycomb Antiferromagnet MnTiO 3

Using inelastic neutron scattering, we investigate the spin wave excitations on the antiferromagnetic MnTiO 3 (T N = 65 K), which has the stacked honeycomb structure. At T = 2 K, the spin wave energy extends up to 10.7 meV with the zone-center anisotropy gap of 0.8 meV. Whereas the dispersion is also strong along the direction perpendicular to the honeycomb planes, the exchange cancellation causes the magnetic interactions to be effectively anisotropic below TN. Furthermore, while the spin wave spectrum survives at temperatures above TN, we find that the magnetic interactions become more anisotropic within the paramagnetic phase. These results suggest that the magnetic interaction in MnTiO 3 crosses over from being three dimensional to two dimensional above T N .

36 MATERIALS SCIENCE↗