SEARCH · Search NASA

Results for “precursor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Petrology and precursors of lithic clasts from feldspathic fragmental breccia 67975

Textures and mineral chemistry (by INAA) of five lithic clasts, including both light green and light gray clasts, from feldspathic fragmental breccia 67975 were studied. The presence of five rock types was confirmed: feldspathic microporphyritic melt breccia, metamorphosed mafic-rich melt breccia with zoned and mantled clasts, 'typical' reequilibrated lunar feldspathic granulites with granoblastic texture and homogeneous mineral chemistry, hornfels, and a recrystallized mafic-rich granulite with relict igneous texture and the composition of a ferroan anorthositic norite. The mineralogy and textural data corroborate the grouping of the light green clasts proposed by Lindstrom (1984). However, the light gray clasts do not appear to be coherent in petrologic (or chemical) characteristics; one is a plagioclase-rich, possibly monomict rock with ferroan anorthositic precursor(s), and the other represents a mixture of feldspathic granulite and ferroan anorthositic norite lithologies.

Mcgee, James J.↗

NASA NTRS1986

Solar flare precursors

Recent progress in the study of flare precursors and onset is reviewed. New theoretical results on filament formation and erution are presented, including especially the dynamical effects of magnetic fields. Ample evidence is found that energetic processes are already at work in the onset phase, a few minutes before the rapid rise of the hard-radiation impulse. In particular, the prevalence of soft and hard X-ray preheating (to less than 100 million K) is detailed, along with a connection to the launch of coronal mass ejections. A possible interpretation of the empirical time profiles near onset is that 'preheating' signifies that the flare has slowly started, and the transition to the impulsive stage then represents a change of phase in the flare-instability process. Finally, the problem of the interpretation of microwave preflare data is delineated.

Van Hoven, G.↗

NASA NTRS1984

Surface roughening as a precursor to the polymorphic transition in CBr4

The morphology of CBr4 crystals was microscopically studied at temperatures near the polymorphic transition (Ttr = 47 C) during growth from the vapor. The observations presented here give evidence that surface roughening is occurring with increasing temperature as an apparent precursor of the solid state phase transition.

Ming, Nai-Ben↗

NASA NTRS1987

Nucleic acid-like structures. II - Polynucleotide analogues as possible primitive precursors of nucleic acids

Activated derivatives of purine-containing deoxynucleoside- diphosphates spontaneously oligomerize to produce pyrophosphate- linked oligodeoxynucleotide analogs. These analogs are of potential interest as models of primitive, polynucleotide precursors. The efficiency of oligomerization (ImpdGpIm and ImpdApIm much greater than ImpdIpIm) appears to reflect a combination of stacking forces and the specific geometric orientations of the stacked units. Under favorable conditions, chain lengths greater than 20 have been obtained for oligomers containing pdGp in the absence of a template. In the presence of a complementary template, the activated derivatives of pdGp and pdAp oligomerize much more extensively. An acyclo-analog of G has also been shown to undergo template-directed oligomerization on poly(C). These observations suggest the possibility that primitive information transfer might have evolved in much simpler systems and that this function was taken over by polynucleotides at a later stage in evolution.

Schwartz, Alan W.↗

NASA NTRS1987

Chondrules, matrix and coarse-grained chondrule rims in the Allende meteorite - Origin, interrelationships, and possible precursor components

INAA and broad-beam EMPA are used to determine the bulk compositions of 20 chondrules, 13 coarse-grained chondrule rims, and one nonporphyritic CV chondrule (NPCVC) from CV3 Allende (and of one NPCVC each from Leoville and Vigarano). The data are presented in extensive tables and graphs and analyzed in detail. Five probable chondrule precursor components are deduced, and the solar-nebula processes giving rise to them (and probably to the coarse-grained rims as well) are discussed. It is suggested that the formation of the rimmed chondrules involved nebular reheating in space, after the accretion of dusty coatings.

Rubin, Alan E.↗

NASA NTRS1986

Polymer precursors for SiC ceramic materials

Work on precursor polymers to SiC was performed, concentrating on polymers made from decamethyl cyclohexasilyene units. The initial approach was to synthesize mixed diphenyl decamethyl cyclohexasilane, dephenylate, and polymerize. This produced polymers which had yields of up to 50 percent SiC. (Theoretical yield is 75 percent). The present approach is to make the polymer through the intermediate trans-1,4-diphenyl decamethyl cyclohexasilane. This should produce a crystalline polymer and high strength fibers. These will be thermally decomposed to SiC fibers. This requires new chemistry which is currently being studied.

Litt, Morton H.↗

NASA NTRS1986

Polymer precursors for ceramic composites

The fiber composite approach to reinforced ceramics provides the possibility of achieving ceramics with high fracture toughness relative to monolithics. Fabrication of ceramic composites, however, demands low processing temperatures to avoid fiber degradation. Formation of complex shapes further requires small diameter fibers as well as techniques for infiltrating the matrix between fibers. Polymers offer low temperature processability, control of rheology not available with ceramic powders, and should serve as precursors to matrix fibers. In recent years, a number of polysilanes and polysilezanes were investigated as potential presursors. A review of candidate polymers is presented, including recent studies of silsesquioxanes.

Hurwitz, Frances I.↗

NASA NTRS1987

Silsesquioxanes as precursors to ceramic composites

Silsesquioxanes having the general structure RSiO(1.5), where R = methyl, propyl, or phenyl, melt flow at 70 to 100 C. Above 100 C, free OH groups condense. At 225 C further crosslinking occurs, and the materials form thermosets. Pyrolysis, with accompanying loss of volatiles, takes place at nominally 525 C. At higher temperatures, the R group serves as an internal carbon source for carbo-thermal reduction to SiC accompanied by the evolution of CO. By blending silsesquioxanes with varying R groups, both the melt rheology and composition of the fired ceramic can be controlled. Fibers can be spun from the melt which are stable in argon in 1400 C. The silsesquioxanes also were used as matrix precursors for Nicalon and alpha-SiC platelet reinforced composites.

Hurwitz, F. I.↗

NASA NTRS1987

Constraints on possible precursor AGN sources of the cosmic X-ray background

New limits on small-scale surface brightness fluctuations of the residual cosmic X-ray background are used to reevaluate the conjecture that unresolved precursor AGN sources could be the origin of the flux. The large number of these predominantly X-ray-emitting objects thereby required imposes that their lifetime be longer than previously considered. Attention is drawn to the fact that the reduction in the effective Eddington luminosity limit for such sources due to electron-positron pair opacity could have the effect of increasing their lifetime to an appropriate level.

Boldt, Elihu↗

NASA NTRS1989

Structural comparison of nickel electrodes and precursor phases

Researchers summarize previous Raman spectroscopic results and discuss important structural differences in the various phases of active mass and active mass precursors. Raman spectra provide unique signatures for these phases, and allow one to distinguish each phase, even when the compound is amorphous to x rays (i.e., does not scatter x rays because of a lack of order and/or small particle size). The structural changes incurred during formation, charge and discharge, cobalt addition, and aging are discussed. The oxidation states and dopant contents are explained in terms of the nonstoichiometric structures.

Cornilsen, Bahne C.↗

NASA NTRS1989

Model estimates of enhanced photochemical production of ozone resulting from convective transport of precursors

Vertical profiles of net photochemical ozone production rates and total tropospheric column production rates were estimated using two models, a simple photochemical box model and a time-dependent one-dimensional transport/kinetics model. Photochemical production of ozone is found to dominate over destruction throughout the vertical extent of the troposphere over the central United States during typical summertime convective conditions. The column net production can be enhanced by the transport of the ozone precursors NO and NMHC from the boundary layer to the free troposphere by convective activity.

Pickering, Kenneth E.↗

NASA NTRS1989

Periodic amplitude variations as precursors of plumes of equatorial ionospheric irregularities

Periodic amplitude fluctuations of VHF signals from a geostationary satellite monitored from near the magnetic equator have been observed in the evening hours as precursors of strong Rayleigh fading associated with plumes of irregularities. These periodic fluctuations called amplitude waves exhibit amplitude changes of only 1 to 2 dB and have been observed for up to 30 minutes before the onset of strong scintillations. Individual fades are correlated over distances of at least 120 km in the magnetic east-west direction. The velocity of these wavelike disturbances has been found to be approximately 140 m/s eastward with a corresponding wavelength of 25 km.

Klobuchar, J. A.↗

NASA NTRS1990

Structural comparison of nickel electrodes and precursor phases

In this paper the previous Raman spectroscopic results are summarized and important structural differences in the various phases of active mass and active mass precursors are discussed. Raman spectra provide unique signatures for these phases, and allow one to distinguish each phase, even when the compound is amorphous to X-rays (i.e., does not scatter X-rays because of a lack of order and/or small particle size). The structural changes incurred during formation, charge and discharge, cobalt addition, and aging wil be discussed. The oxidation states and dopant contents are explained in terms of the nonstoichiometric structures.

Cornilsen, Bahne C.↗

NASA NTRS1991

Phase Transformations In Mullite-Precursor Xerogels

Report describes experimental study of phase transformations occurring in monophasic and diphasic xerogels of overall stoichiometric mullite composition during thermal treatment. Mullite valued as refractory material because of relatively high mechanical strength, excellent resistance to thermal shock, high resistance to creep, low density, low thermal conductivity, and stability at high temperature. Part of continuing effort to develop precursor materials transformed into mullite and sintered at temperatures low enough to avoid degradation of non-mullite reinforcing fibers in manufacture of mullite/fiber composites.

Hyatt, Mark J.↗

NASA NTRS1991

Formation of Apollo 14 aluminous mare basalts by replenishment fractional crystallization and assimilation of precursor crust

Apollo 14 aluminous mare basalts (AMB) have been the subject of considerable controversy. These basalts were divided into 5 distinct groups on the basis of RE and HFS element abundances. The groups are similar in major element compositions but display an 8 fold variation in REE abundances. Open-system processes were explored which are common on Earth: combined replenishment fractional crystallization (RFC); and assimilation fractional crystallization (AFC), where the assimilant is a partial melt of precursor crust. RFC often produces decoupled major and trace element variations, while AFC can produce significant variation in incompatible trace element ratios. A model was envisioned by which magmas of Group 5 composition were emplaced in shallow chambers. The Apollo 14 AMB was modeled by RFC using a parental magma of Group 5 composition with the fractionating assemblage consisting of 60 pct. Px, 30 pct. Plag, and 3 pct. Il.

Dickinson, Tammy L.↗

NASA NTRS1992

Glass precursor approach to high-temperature superconductors

The available studies on the synthesis of high T sub c superconductors (HTS) via the glass precursor approach were reviewed. Melts of the Bi-Sr-Ca-Cu-O system as well as those doped with oxides of some other elements (Pb, Al, V, Te, Nb, etc.) could be quenched into glasses which, on further heat treatments under appropriate conditions, crystallized into the superconducting phase(s). The nature of the HTS phase(s) formed depends on the annealing temperature, time, atmosphere, and the cooling rate and also on the glass composition. Long term annealing was needed to obtain a large fraction of the 110 K phase. The high T sub c phase did not crystallize out directly from the glass matrix, but was preceded by the precipitation of other phases. The 110 K HTS was produced at high temperatures by reaction between the phases formed at lower temperatures resulting in multiphase material. The presence of a glass former such as B2O3 was necessary for the Y-Ba-Cu-O melt to form a glass on fast cooling. A discontinuous YBa2Cu3O(7-delta) HTS phase crystallized out on heat treatment of this glass. Attempts to prepare Tl-Ba-Ca-Cu-O system in the glassy state were not successful.

Bansal, Narottam P.↗

NASA NTRS1992

An acetate precursor process for BSCCO (2223) thin films and coprecipitated powders

Since the discovery of high temperature superconducting oxides much attention has been paid to finding better and useful ways to take advantage of the special properties exhibited by these materials. One such process is the development of thin films for engineering applications. Another such process is the coprecipitation route to producing superconducting powders. An acetate precursor process for use in thin film fabrication and a chemical coprecipitation route to Bismuth based superconducting materials has been developed. Data obtained from the thin film process were inconclusive to date and require more study. The chemical coprecipitation method of producing bulk material is a viable method, and is preferred over the previously used solid state route. This method of powder production appears to be an excellent route to producing thin section tape cast material and screen printed devices, as it requires less calcines than the oxide route to produce quality powders.

Haertling, Gene H.↗

NASA NTRS1991

Gas dynamic heating of chondrule precursor grains in the solar nebula

In the present investigation of solar nebula gasdynamic processes which may account for the melting of chondrule precursor grains, both drag heating due to grain relative motion and heating due to collisions with gas molecules in thermal motion are considered in conjunction with the effect of thermally emitted radiation on grain heating and cooling. The melting of chondrule-sized grains is most directly associated with those dust-rich and optically thick zones in which thermal radiation from neighboring grains balances grain radiative cooling. Nebular shock fronts may be capable of furnishing the requisite relative velocities and heated gas regions.

Hood, L. L.↗