Search NASA⌕ Search

SEARCH · Search NASA

Results for “process influence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The influences of fluorine and process variations on polysilicon film stress and MOSFET hot carrier effects

The use of fluorinated gate oxides may provide an improvement in nMOSFET reliability by enhancing hot carrier resistance. In order to clarify the mechanisms by which polysilicon processing and fluorination influence the oxide behavior, a matrix of nMOSFET structures was prepared using various processing, doping, and implantation strategies. These structures were evaluated for crystalline morphology and chemical element distribution. Mechanical stress measurements were taken on the polysilicon films from room temperature to cryogenic temperature. These examinations showed that fluorination of a structure with randomly oriented polysilicon can reduce residual mechanical stress and improve hot carrier resistance at room temperature.

Lowry, Lynn E.↗

Influence of atmospheric processes on the solubility and composition of iron in Saharan dust

Aerosol iron was examined in Saharan dust plumes using a combination of iron near-edge X-ray absorption spectroscopy and wet-chemical techniques. Aerosol samples were collected at three sites located in the Mediterranean, the Atlantic, and Bermuda to characterize iron at different atmospheric transport lengths and time scales. Iron(III) oxides were a component of aerosols at all sampling sites and dominated the aerosol iron in Mediterranean samples. In Atlantic samples, iron(II and III) sulfate, iron(III) phosphate, and iron(II) silicates were also contributors to aerosol composition. With increased atmospheric transport time, iron(II) sulfates are found to become more abundant, aerosol iron oxidation state became more reduced, and aerosol acidity increased. As a result, atmospheric processing including acidic reactions and photoreduction likely influence the form of iron minerals and oxidation state in Saharan dust aerosols and contribute to increases in aerosol-iron solubility.

54 ENVIRONMENTAL SCIENCES↗

The Influence of Tropospheric Processes in Modeling the Middle Atmosphere with Gravity Waves

Our Numerical Spectral Model (NSM) extends from the ground up into the thermosphere and has a vertical grid point resolution of about 0.5 km to resolve the interactions of gravity waves (GWs) described with Hines' Doppler Spread Parameterization (DSP). This model produces in the stratosphere and mesosphere the major features of QBO, SAO, tides, and planetary waves. The purpose of this paper is to discuss results from an initial study with our 3D model that shows how certain tropospheric processes can affect the dynamics of the middle atmosphere. Under the influence of tropospheric heating, and augmented by GW interactions, two distinct but related processes can be identified. (1) A meridional circulation develops in the stratosphere, with rising motions at low latitudes that are in magnitude comparable to the downward propagation of the QBO. As Dunkerton pointed out, a larger GW source is then required to reproduce the observed QBO, which tends to move us closer to the values recommended for the DSP. This has significant consequences for our model results that describe the upper mesosphere, considering the general importance of GWs for this region and in influencing planetary waves (e.g., 2-day wave) and tides in particular. (2) Tropospheric heating produces zonal jets near the tropopause that are related to latitudinal variations in pressure and reversing temperature variations (resembling the dynamical conditions near the mesopause), which in turn is conducive to generate baroclinic instability. Modeling results show that our ability to generate the QBO critically depends on the magnitude of the temperature reversal that is a measure of this instability. Planetary waves are generated in this process, which can apparently interfere with or augment the GW interactions. As originally demonstrated by Lindzen and Holton, the eastward propagating Kelvin waves and westward propagating Rossby gravity waves (generated by tropospheric convection) can in principle provide the acceleration to influence the QBO, and we were able to confirm this with our 3D model.

Mayr, H. G.↗

Influence of the anode processes on discharges driven by thermionic emission

The influence of electron reflection and secondary electron emission due to electron impact from the anode on discharges driven by thermionic emission is studied by the self-consistent one-dimensional particle-in-cell Monte Carlo collisions model. Two regimes are considered. In the first regime, the two-stream instability is excited and large anode sheath potential is obtained. It is found that in this regime, the reflected electrons play a significant role. In the second regime, the instability is not excited and the anode sheath potential is small. The dominant anode process in this regime is the secondary electron emission. It is shown that in both regimes, the anode processes significantly influence the plasma parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of Manufacturing Processes and Microstructures on the Performance and Manufacturability of Advanced High Strength Steels

Advanced high strength steels (AHSS) are performance-based steel grades and their global material properties can be achieved with various steel chemistries and manufacturing processes, leading to various microstructures. In this paper, we investigate the influence of supplier variation and resulting microstructure difference on the overall mechanical properties as well as local formability behaviors of advanced high strength steels (AHSS). For this purpose, we first examined the basic material properties and the transformation kinetics of TRansformation Induced Plasticity (TRIP) 800 steels from three different suppliers under different testing temperatures. The experimental results show that there is a significant supplier (i.e., manufacturing process) dependency of the TRIP 800 steel mechanical and microstructure properties. Next, we examined the local formability of two commercial Dual Phase (DP) 980 steels during stamping process. The two commercial DP 980 steels also exhibit noticeably different formability during stamping process in the sense that one of them shows severe tendency for shear fracture. Microstructure-based finite element analyses are carried out next to simulate the localized deformation process with the two DP 980 microstructures, and the results suggest that the possible reason for the difference in formability lies in the morphology of the hard martensite phase in the DP microstructure.

DP steel↗

Experimental study of the {sup 11,12}B(n,{gamma}) reactions and their influence on r-process nucleosynthesis of light elements

We have studied the neutron-transfer reactions {sup 11,12}B(d,p){sup 12,13}B in inverse kinematics to obtain information about the neutron-capture reactions {sup 11,12}B(n,{gamma}). These capture reactions are suggested to play a role in seeding r-process nucleosynthesis through the production of light, neutron-rich nuclei. The neutron spectroscopic factors of the states in {sup 12,13}B were deduced and the branching ratio of the neutron-unbound state at E{sub X}=3.389 MeV in {sup 12}B was obtained to provide the ratio of partial widths, {Gamma}{sub n}/{Gamma}{sub {gamma}}. The reaction rates for {sup 11,12}B(n,{gamma}) are estimated for direct captures and resonant captures and compared with previous compilations. The astrophysical implications, especially for neutrino-driven wind models in core-collapse supernovae, are discussed in the r-process network framework using our updated reaction rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The influence of the processing parameters on the reactive flash sintering of ZrO 2 -CeO 2

Reactive flash sintering (RFS) is a method that was recently developed to produce dense single-phase bulk ceramic parts through solid-state reactions in a single-step that only takes a few minutes. The influence of the RFS parameters on the phase purity of a simple mixed oxide, (Zr 0.8 ,Ce 0.2 )O 2 , was investigated. Parameters such as furnace temperature, furnace atmosphere, electric current density, and alternating current (AC) or direct current (DC) were examined. It was found that (Zr 0.8 ,Ce 0.2 )O 2 pellets with high densities, above 90% of its theoretical density, can be produced by RFS in a few minutes when RFS occurs under oxidizing atmospheres, AC fields with current densities of 100 mA·mm –2 , and at a furnace temperature of 1200°C. Reducing conditions such as Ar-H 2 atmosphere and DC fields, low furnace temperatures, and low current densities resulted in phase impurities and poor reactions between the ZrO 2 and the CeO 2 powders. These results show that RFS is a useful method to produce mixed oxides, but it is very sensitive to the processing parameters. This is the first time that the influence of most of the RFS processing parameters has been studied systematically. Thus, the present work aims to provide guidelines on selecting the right processing parameters when exploring RFS.

36 MATERIALS SCIENCE↗

Influence of cleaning process on the laser-induced damage threshold of substrates

The cleaning process of optical substrates plays an important role during the manufacture of high-power laser coatings. Two kinds of substrates, fused silica and BK7 glass, and two cleaning processes, called process 1 and process 2 having different surfactant solutions and different ultrasonic cleaning parameters, are adopted to compare the influence of the ultrasonic cleaning technique on the substrates. The evaluation standards of the cleaning results include contaminant-removal efficiency, weak absorption, and laser-induced damage threshold of the substrates. For both fused silica and BK7, process 2 is more efficient than process 1. Because acid and alkaline solutions can increase the roughness of BK7, process 2 is unsuitable for BK7 glass cleaning. The parameters of the cleaning protocol should be changed depending on the material of the optical components and the type of contamination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detailed investigation of the influence of the process parameters on the nano-morphology of Ag deposited on SiC by radio-frequency sputtering

In this work, a detailed study of the influence of the synthesis parameters (deposition time t and emission current I) on the morphological properties of Ag nanoparticles sputter-deposited on silicon carbide is carried out. Using the atomic force microscopy technique, we analyzed the evolution of several structural characteristics as a function both of t and I: the length and width of the Ag nanoparticles, the number of nanoparticles per unit area, the nanoparticles' fraction of the covered area, and the roughness of the resulting Ag film. Using consolidated theoretical frameworks and fitting approaches, the relations between such quantities and the process parameters t and I were established. In particular, the application of the interrupted coalescence model allowed us to evaluate the critical mean island diameter for the partial coalescence process; the dynamic scaling theories of growing interfaces lead, instead, to the determination of the dynamic scaling, growth, and roughness exponents (the values of which suggest a conservative growth process of the islands in which the atomic surface diffusion plays a key role). Finally, the Avrami approach to the study of the evolution of the fraction of area covered by the Ag islands allowed us to evaluate the Avrami exponent.

36 MATERIALS SCIENCE↗

Microstructure heterogeneity after the ECAP process and its influence on recrystallization in aluminium

The main purpose of the present work is to describe the qualitative and quantitative behaviours of aluminium during high strain plastic deformation and the effect of deformation on the subsequent recrystallization process. An Electron Backscatter Diffraction analysis of aluminium after the Equal channel angular pressing (ECAP) and recrystallization process is presented. In order to do this, several topological maps are measured for samples processed by 4 and 8 passes and recrystallized. The processing was conducted with route C. For all samples, distributions of grain size, misorientation, image quality factor (IQ) and texture were preceded and then analysed in some detail. - Highlights: ► Describe the microstructure fragmentation in aluminum. ► High strain plastic deformation and effect of deformation on recrystallization. ► The microstructure fragmentation and its influence on recrystallization. ► Image quality factor and misorientation characteristics are examined using EBSD.

36 MATERIALS SCIENCE↗

Depth and microtopography influence microbial biogeochemical processes in a forested peatland

Background and aims: Peat-accumulating wetlands have undulating surfaces of raised areas (hummocks) and depressions (hollows). Hummock-hollow microtopography in relation to the water table influences the distribution of plant species, root density, and microbial community composition, which could in turn alter carbon (C) and nitrogen (N) cycling within peatlands. We used paired hummock and hollow cores from a boreal, forested peatland to assess how microtopography influences peatland microbial function and, in turn, ecosystem C and N cycling. Methods: The peat was analyzed for microbial biomass and potential enzyme activity in 10 cm depth increments relative to the water table, resulting in two increments for hollows and three for hummocks, which has a raised increment above the water table. Results: Across hummocks and hollows, microbial C and N and fungal biomass generally decreased with depth from the peat surface. In contrast, potential enzyme activity often increased with depth, but this varied within enzyme functional groups according to topography, depth, or both. The potential enzyme activity of C-N degrading peptidases, for example, differed across the five topography × depth increments with the lowest rate in the aerated hummocks. Hummocks compose approximately 66% of the land area at our study site and would therefore underestimate C turnover by an average of 25% if solely used to extrapolate patterns across a forested bog. Conclusion: In conclusion, our results suggest that asynchrony in C and N cycling across the undulating surface of forested peatlands impacts our ability to accurately predict biogeochemical cycling across this important ecosystem.

54 ENVIRONMENTAL SCIENCES↗

Utilizing remote sensing of thematic mapper data to improve our understanding of estuarine processes and their influence on the productivity of estuarine-dependent fisheries

A stochastic spatial computer model addressing coastal resource problems in Lousiana is being refined and validated using thematic mapper (TM) imagery. The TM images of brackish marsh sites were processed and data were tabulated on spatial parameters from TM images of the salt marsh sites. The Fisheries Image Processing Systems (FIPS) was used to analyze the TM scene. Activities were concentrated on improving the structure of the model and developing a structure and methodology for calibrating the model with spatial-pattern data from the TM imagery.

Browder, Joan A.↗

The role of stereochemistry in combustion processes

Stereochemical effects significantly influence chemical processes, yet it is not well understood if they are a leading source of uncertainty in combustion modeling. Stereochemistry influences a combustion model (i) at the earliest stage of its construction when mapping the reaction network, (ii) in the computation of individual thermochemical and rate parameters, and (iii) in the prediction of combustion observables. The present work reviews the importance of enumerating stereochemical species and reactions at each of these steps. Further, it analyzes the separate influence of several types of stereochemistry, including geometric, optical, and fleeting transition state diastereomers. Three reaction networks serve to examine which stages of low-temperature oxidation are most affected by stereochemistry, including the first and second oxidation of n-butane, the third oxidation of n-pentane, and the early stages of pyrolysis of 1- and 2-pentene. The 149 reactions in the n-butane mechanism are expanded to 183 reactions when accounting for diastereomerism. Each of these 183 reactions is parameterized with ab initio kinetics computations to determine that, for the n-butane mechanism, the median factor of diastereomeric deviation is 3.5 at 360 K for rate constants and as high as 1.6 for mechanism reactivity, in terms of ignition delay times, as opposed to a mechanism without stereochemical expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of the process parameters on the spray pyrolysis technique, on the synthesis of gadolinium doped-ceria thin film

Graphical abstract: Gas-tight CGO made by spray pyrolysis suitable to be used as SOFC electrolyte. Display Omitted Highlights: ► Dense and crystalline CGO films deposited by spray pyrolysis on various substrates. ► Solvent did not have a strong influence on the film microstructure, defect concentration or thickness. ► The substrate did not have a strong influence on the film microstructure, defect concentration or thickness. ► Films with at least 2.5 μm of thickness presented high impermeability. ► The films obtained are suitable to use as a SOFC electrolyte. -- Abstract: This work presents the results of a process of optimization applied to gadolinia-doped ceria (Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9−x}, or CGO) thin films, deposited by spray pyrolysis (SP). Spray pyrolysis is a high thermal deposition method that combines material deposition and heat treatment. This combination is advantageous since the post-deposition heat treatment step is not necessary. However, stresses are solidified in the coating during the deposition, which may lead to the initiation of a crack in the coating. The aim of this work was to achieve thin, dense, and continuous CGO coatings, which may be used as gas separation membranes and as a solid state electrochemical interfaces. Dense, flat, low-defect substrates such as silica slides, silicon mono crystal wafers, and porous substrates were used as substrates in this work. Cerium ammonium nitrate and gadolinium acetylacetonate were dissolved in ethanol and butyl carbitol to form a precursor solution that was sprayed on the heated substrates. Process parameters such as solvent composition, deposition rate and different heating regimes were analyzed. The microstructure was analyzed by secondary electron microscopy (SEM) and was found that thin, dense, and defect-free films could be produced on dense and porous substrates. The results obtained show that it is possible to obtain a CGO dense film deposited by spray pyrolysis. X-ray diffraction (XRD) analysis showed that the films were crystalline after the deposition without requiring post-deposition heat treatment. The crystallite size does not vary significantly as a function of the annealing temperature.

36 MATERIALS SCIENCE↗

Use of satellite data and modeling to assess the influence of stratospheric processes on the troposphere

Over the past forty years, numerous linear stability studies have been performed in order to explain the origin and structure of observed waves in the atmosphere. Of these studies, only a small fraction have considered the stability of time-dependent, zonally varying flow or the influence of radiative-photochemical feedbacks on the stability of zonally uniform flow. The stability of such flows is described, and these flows may yield important information concerning the origin, structure, and transient time scales of free waves in the atmosphere. During the period 1990 to 1991, a beta-plane model that couples radiative transfer, ozone advection, and ozone photochemistry with the quasigeostrophic dynamical circulation was developed in order to study the diabatic effects of Newtonian cooling and ozone-dynamics interaction on the linear stability of free planetary waves in the atmosphere. The stability of a basic state consisting of a westward-moving wave and a zonal mean jet was examined using a linearized, nondivergent barotropic model on sphere. The sensitivity of the stability of the flow to the strength and structure of the zonal jet was emphasized. The current research is focused on the following problems: (1) examination of the finite amplitude interactions among radiation, ozone, and dynamics; and (2) examination of the role of seasonal forcing in short-term climate variability. The plans for next year are presented.

Nathan, Terrence↗

Influence of thermal processing on magnetotransport characteristics of NdSr{sub 2}Mn{sub 2}O{sub 7+δ}

Highlights: • The NdSr{sub 2}Mn{sub 2}O{sub 7+δ} compounds with different oxygen non-stoichiometry were prepared. • According to XRD analysis, all the oxides were completely single-phase. • The strong competition between different types of magnetic exchange interactions was revealed. • The samples demonstrate semiconducting behavior over the explored temperature range. • A large negative magnetoresistance effect for all the compounds below 200 K was observed. - Abstract: Background: Influence of oxygen non-stoichiometry on magnetic and electric properties of the compounds has not almost been studied yet. Aim: Synthesis of a number of the NdSr{sub 2}Mn{sub 2}O{sub 7+δ} samples subjected to various thermal processing in air atmosphere and investigation of their structure, oxygen non-stoichiometry, electrical and magnetic properties. Method: The compounds obtained have been characterized by using X-ray diffraction (XRD) analysis, a modified gravimetric method, vibrating sample magnetometry (VSM) and standard DC four-probe method. Results: It was established that additional firing of the samples at different temperatures leads to essential changes in the oxygen non-stoichiometry. The noticeable magnetoresistance (MR) effect is observed for all the compounds below 200 K and increases monotonically as the temperature decreases. The MR values for the compounds as a function of oxygen content vary nonlinearly. The largest MR value of 380% at the 5 K and magnetic field of 7 T was achieved for the sample with the oxygen non-stoichiometry of δ = 0.03. Conclusions: The results observed are discussed in the assumption of ferromagnetic cluster formation in the compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Utilizing remote sensing of Thematic Mapper data to improve our understanding of estuarine processes and their influence on the productivity of estuarine-dependent fisheries

The purpose of the project is to refine and validate a probabilistic spatial computer model through the analyses of thematic mapper imagery. The model is designed to determine how the interface between marshland and water changes as marshland is converted to water in a disintegrating marsh. Coastal marshland in Louisiana is disintegrating at the rate of approximately 40 sq mi a year, and an evaluation of the potential impact of this loss on the landings of estuarine-dependent fisheries is needed by fisheries managers. Understanding how marshland-water interface changes as coastal marshland is lost is essential to the process of evaluating fisheries effects, because several studies suggest that the production of estuarine-dependent fish and shellfish may be more closely related to the interface between marshland and water than to acreage of marshland. The need to address this practical problem has provided an opportunity to apply some scientifically interesting new techniques to the analyses of satellite imagery. Progress with the development of these techniques is the subject of this report.

Browder, Joan A.↗