Search NASA⌕ Search

SEARCH · Search NASA

Results for “rate structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Structure-property relationships and mobility optimization in sputtered La-doped BaSn O 3 films: Toward 100cm 2 V -1 s -1

he wide band gap semiconducting perovskite BaSnO 3 is of high current interest due to outstanding room temperature mobility at high electron density, fueled by potential applications in oxide, transparent, and power electronics. Due in part to a lack of lattice-matched substrates, BaSnO 3 thin films suffer from high defect densities, however, limiting electron mobility. Additionally, the vast majority of BaSnO 3 thin film research has focused on pulsed laser deposition or molecular beam epitaxy. In this work, we present an exhaustive optimization of the mobility of Ba 0.98 La 0.02 SnO 3 films grown by a scalable, high-throughput method: high-pressure-oxygen sputter deposition. Considering target synthesis conditions, substrate selection, buffer layer structure, deposition temperature, deposition rate, thickness, and postdeposition annealing conditions, and by combining high-resolution x-ray diffraction, reciprocal space mapping, rocking curve analysis, scanning transmission electron microscopy, atomic force microscopy, and temperature-dependent electronic transport measurements, detailed understanding of synthesis-structure-property relationships is attained. Optimized room temperature mobility of 96 cm 2 V –1 s –1 is achieved in vacuum-annealed GdScO 3 (110)/BaSnO 3 (120 nm)/Ba 0.98 La 0.02 SnO 3 (200 nm) heterostructures, as well as 92 cm 2 V –1 s –1 on unbuffered substrates and 87 2 V –1 s –1 without postdeposition annealing. These results, including important trends in defect densities and a surprising dependence of mobility on lattice mismatch, substantially expand the understanding of the interplay between deposition conditions, microstructure, and transport in doped BaSnO 3 films, establishing competitive mobilities in films fabricated via a scalable, high-throughput, industry-standard technique.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Novel Co‐Catalytic Activities of Solid and Liquid Phase Catalysts in High‐Rate Li‐Air Batteries

Abstract Li‐air batteries are considered strong candidates for the next‐generation energy storage systems designed for electrical transportation. However, low cyclability and current rates are two major drawbacks that hinder them from further realization. These issues necessitate the discovery of novel materials to significantly enhance the redox process of discharge products. In this study, a novel catalytic system comprised of tin sulfide (SnS) nanoflakes as a solid catalyst and tin iodide (SnI 2 ) as a dual‐functional electrolyte additive is discovered. This system enables operating the battery at high current rates up to 10 000 mA g −1 (corresponding to 1 mA cm −2 ). The SnS catalyst shows outstanding catalytic activity for both oxygen reduction and evolution reactions compared to carbon, noble metals, and other transition metal dichalcogenides. It also exhibits good structural integrity at high rates. The computations indicate numerous possible oxygen reduction sites without oxygen dissociations on the SnS surface through solution mechanism that is likely responsible for the formation of Li 2 O 2 . The calculations also indicate that the role of the SnI 2 is not only reacting with the lithium anode to provide protection but reducing the charge potential by promoting catalytic decomposition of the Li 2 O 2 . This work provides new novel additives for designing high‐rate Li‐air batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Complete Phase Transformation of Ir Nanowire Network into Defect-Rich Oxide Catalyst for High-Performance PEM Water Electrolysis

Iridium-based catalysts remain the most reliable option for the oxygen evolution reaction (OER) in proton exchange membrane water electrolyzers (PEMWEs). However, their high cost and limited performance represent critical barriers to the commercialization of this green hydrogen production technology. Herein, we report the creation of a metallic Ir nanowire network (IrNWN), which exhibits superior OER performance through its in-situ transition into an oxide structure with high intrinsic activity. At a low loading of 0.25 mgIr/cm2 in PEMWEs, IrNWN achieved a current density of 3.13 A/cm2 at a cell voltage of 1.8 V, outperforming the commercial Ir-based catalyst and surpassing the Department of Energy (DOE) 2026 technical target. Moreover, the high activity of IrNWN was maintained for 900 hours in a durability test at 2 A/cm2, showing a low degradation rate of 0.042 mV/hour. Structural analysis of the electrochemically oxidized IrNWN revealed the presence of mixed Ir oxidation states and a high density of surface terminal oxygen groups (μ1-O), which contributed to a reduced energy barrier for the rate-determining O-O coupling step.

oxygen evolution reaction↗
DOE OSTI2025

Computing Reaction Kinetics with MC-PDFT–OPESf: Combining Multireference Electronic Structure Theory and Enhanced Sampling

Accurate rate constants are crucial for understanding and optimizing catalytic reactions mediated by enzymes, metalloproteins, and heterogeneous catalysts. These systems frequently present a dual computational challenge. Multiconfigurational reaction sites require multireference techniques for the accurate treatment of the electronic structure, and high activation barriers prevent efficient sampling of unbiased reactive transitions. In this work, we combine multiconfiguration pair-density functional theory (MC-PDFT) as an accurate and efficient multireference electronic structure method with on-the-fly probability-enhanced sampling flooding (OPESf) as an enhanced sampling method capable of accelerating reactive transitions. We demonstrate the approach on the Diels–Alder [4+2] cycloaddition between cis-butadiene and ethene as a reaction characterized by a large activation barrier and multireference character. MC-PDFT–OPESf provides reaction rates in agreement with experiments at a fraction of the computational cost required by conventional unbiased ab initio calculations. Here, we propose MC-PDFT–OPESf as an efficient approach for computing kinetics in strongly correlated molecular systems.

Chemical calculations↗
DOE OSTI2022

Towards extreme fast charging of 4.6V LiCoO 2 via mitigating high-voltage kinetic hindrance

High-voltage LiCoO 2 (LCO) is an attractive cathode for ultra-high energy density lithium-ion batteries (LIBs) in the 3C markets. However, the sluggish lithium-ion diffusion at high voltage significantly hampers its rate capability. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that the kinetic limitations can be mitigated by a facial Mg 2+ +Gd 3+ co-doping method. The as-prepared LCO shows significantly enhanced Li-ion diffusion mobility at high voltage, making more homogenous Li-ion de/intercalation at a high-rate charge/discharge process. The homogeneity enables the structural stability of LCO at a high-rate current density, inhibiting stress accumulation and irreversible phase transition. When used in combination with a Li metal anode, the doped LCO shows an extreme fast charging (XFC) capability, with a superior high capacity of 193.1 mAhg -1 even at the current density of 20C and high-rate capacity retention of 91.3% after 100 cycles at 5C. In conclusion, this work provides a new insight to prepare XFC high-voltage LCO cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Automated theoretical chemical kinetics: Predicting the kinetics for the initial stages of pyrolysis

Large scale implementation of high level computational theoretical chemical kinetics offers the prospect for dramatically improving the fidelity of combustion chemical modeling. To facilitate such efforts, we have developed a suite of codes, collectively referred to as AutoMech, that allow for the automatic prediction of the kinetics for large sets of reactions via ab initio transition-state-theory based master-equation calculations. The primary input is simply the mechanism, a dictionary relating chemically identifiable species descriptors (e.g., SMILES or InChIs) to species labels in the mechanism, and a specification of the electronic structure and transition state theory models to be implemented. Here we illustrate the current utility of AutoMech through a study of the initial stages of pyrolysis for 3 sets of fuels: sequences of alkanes, alcohols, and aldehydes. For simplicity, the analysis focuses on abstractions from the fuel by H, CH 3 , and OH, and the decomposition of the resulting radicals. Altogether, there are a total of 166 input channels in these sets (more than 363 forward reactions when expanded to the full set of elementary reactions). The code successfully produces high quality rate estimates (with apparent uncertainties less than a factor of two in limited comparisons with experiment) for > 95% of these. For the radical decomposition reactions, the analysis includes predictions for the pressure dependence of the kinetics. This wide-ranging exploration illustrates (i) the effect of different levels of prediction on the expected accuracy, (ii) the branching between abstractions at different sites for different abstractors, (iii) the dependence of the rates on the chemical structure, and (iv) the variation in radical stabilities across chemical families. These results, as well as the demonstrated feasibility of the methodology, should find further utility in the development of accurate rate expressions for arbitrary fuels. (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Elliott, Sarah N.↗
DOE OSTI2021

Mapathons versus automated feature extraction: a comparative analysis for strengthening immunization microplanning

Background: Social instability and logistical factors like the displacement of vulnerable populations, the difficulty of accessing these populations, and the lack of geographic information for hard-to-reach areas continue to serve as barriers to global essential immunizations (EI). Microplanning, a population-based, healthcare intervention planning method has begun to leverage geographic information system (GIS) technology and geospatial methods to improve the remote identification and mapping of vulnerable populations to ensure inclusion in outreach and immunization services, when feasible. We compare two methods of accomplishing a remote inventory of building locations to assess their accuracy and similarity to currently employed microplan line-lists in the study area. Methods: The outputs of a crowd-sourced digitization effort, or mapathon, were compared to those of a machine-learning algorithm for digitization, referred to as automatic feature extraction (AFE). The following accuracy assessments were employed to determine the performance of each feature generation method: (1) an agreement analysis of the two methods assessed the occurrence of matches across the two outputs, where agreements were labeled as “befriended” and disagreements as “lonely”; (2) true and false positive percentages of each method were calculated in comparison to satellite imagery; (3) counts of features generated from both the mapathon and AFE were statistically compared to the number of features listed in the microplan line-list for the study area; and (4) population estimates for both feature generation method were determined for every structure identified assuming a total of three households per compound, with each household averaging two adults and 5 children. Results: The mapathon and AFE outputs detected 92,713 and 53,150 features, respectively. A higher proportion (30%) of AFE features were befriended compared with befriended mapathon points (28%). The AFE had a higher true positive rate (90.5%) of identifying structures than the mapathon (84.5%). The difference in the average number of features identified per area between the microplan and mapathon points was larger (t = 3.56) than the microplan and AFE (t = -2.09) (alpha = 0.05). Conclusions: Our findings indicate AFE outputs had higher agreement (i.e., befriended), slightly higher likelihood of correctly identifying a structure, and were more similar to the local microplan line-lists than the mapathon outputs. These findings suggest AFE may be more accurate for identifying structures in high-resolution satellite imagery than mapathons. However, they both had their advantages and the ideal method would utilize both methods in tandem.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Deep nonparametric estimation of operators between infinite dimensional spaces

Learning operators between infinitely dimensional spaces is an important learning task arising in machine learning, imaging science, mathematical modeling and simulations, etc. This paper studies the nonparametric estimation of Lipschitz operators using deep neural networks. Non-asymptotic upper bounds are derived for the generalization error of the empirical risk minimizer over a properly chosen network class. Under the assumption that the target operator exhibits a low dimensional structure, our error bounds decay as the training sample size increases, with an attractive fast rate depending on the intrinsic dimension in our estimation. Our assumptions cover most scenarios in real applications and our results give rise to fast rates by exploiting low dimensional structures of data in operator estimation. We also investigate the influence of network structures (e.g., network width, depth, and sparsity) on the generalization error of the neural network estimator and propose a general suggestion on the choice of network structures to maximize the learning efficiency quantitatively.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Deep Nonparametric Estimation of Operators between Infinite Dimensional Spaces

Learning operators between infinitely dimensional spaces is an important learning task arising in machine learning, imaging science, mathematical modeling and simulations, etc. This paper studies the nonparametric estimation of Lipschitz operators using deep neural networks. Non-asymptotic upper bounds are derived for the generalization error of the empirical risk minimizer over a properly chosen network class. Under the assumption that the target operator exhibits a low dimensional structure, our error bounds decay as the training sample size increases, with an attractive fast rate depending on the intrinsic dimension in our estimation. Our assumptions cover most scenarios in real applications and our results give rise to fast rates by exploiting low dimensional structures of data in operator estimation. We also investigate the influence of network structures (e.g., network width, depth, and sparsity) on the generalization error of the neural network estimator and propose a general suggestion on the choice of network structures to maximize the learning efficiency quantitatively.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Magnetic reconnection in 3D fusion devices: non-linear reduced equations and linear current-driven instabilities

Abstract Magnetic reconnection in 3D fusion devices is investigated. With the use of Boozer co-ordinates, we reduce the non-linear resistive magnetohydrodynamic equations in the limit of large aspect ratio and finite pressure fluctuations, to obtain a set of non-linear equations suitable for magnetic reconnection studies in stellarators. Magnetic flux unfreezing due to a finite electron mass is also considered. Equations that govern the linear regime and some of their general properties are given. We emphasise the role of magnetic geometry and identify how some aspects of stellarator optimisation could have an impact on reconnecting instabilities, in particular by exacerbating those enabled by electron inertia. The effect of 3D coupling on the linear reconnection rates and the mode structure is quantitatively addressed in the case in which the equilibrium rotational transform has one specific resonant location for which one mode can reconnect while coupled to an arbitrary number of non-resonant harmonics. The full problem is rigorously reduced to an equivalent cylindrical one, by introducing some geometrically modified plasma inertial and dissipative scales. The 3D scalings for the growth rates of reconnection instabilities and their destabilisation criteria are given.

Physics↗
DOE OSTI2025

Semiclassical transition state theory through the lens of the restricted partition function

The wide adoption of transition state theory in resolving the rates of molecular processes relies on the simplification from reducing the formal and numerical expense of dynamics by a geometric constraint. Such a reduction is at odds with the uncertainty in localization that the uncertainty principle requires. While many forms of semiclassical transition state theory (SCTST) have been aimed at addressing this challenge, a popular approach has relied on resolving the underlying phase space structure of the exact rate formula to leverage Bohr–Sommerfeld quantization. Here, the Hernandez–Miller SCTST reframed the thermal rate formula into an integral of the so-called restricted partition function (RPF) over the action associated with the reaction. The density-of-state SCTST has reframed the rate formula in terms of the instanton’s density of states (DoS). Here, we show the relationship between the RPF-SCTST and the DoS-SCTST and derive the latter from the former. In this way, we help unify these branches of SCTST and provide a clearer formalism for future advances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The high pressure dependence of x-ray induced decomposition of cadmium oxalate

The high proclivity of x rays to destabilize and distort molecular structures has been previously utilized in the synthesis of novel compounds. Here, we show that x-ray induced decomposition of cadmium oxalate induces chemical and structural transformations only at 0.5 and 1 GPa. Using x-ray diffraction and Raman spectroscopy, the synthesized product is identified as cadmium carbonate with cadmium oxalate remnants, which is stable under ambient conditions. At ambient and >1 GPa pressures, only degradation of the electronic density distribution is observed. The transformation kinetics are examined in terms of Avrami’s model, which demonstrates that despite the necessity of high pressure for efficient x-ray induced synthesis of cadmium carbonate, the rate and geometry of structural synthesis in the 0.5–1 GPa pressure range do not depend on the applied pressure. In addition, the possible role of intermolecular distance and molecular mobility in transformation yield is also discussed. Our experimental results indicate that x-ray induced photochemical synthetic pathways can be modulated and optimized by specific parameter selection such as high pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Monolignol acyltransferase for lignin p-hydroxybenzoylation in Populus

Plant lignification exhibits significant plasticity. Lignin in many species including Populus spp. has long been known decorated with p-hydroxybenzoates. However, the molecular basis for such structural modification remains undetermined. Here we report the identification and characterization of a Populus BAHD family acyltransferase that catalyzes monolignol p-hydroxybenzoylation, thus controlling the formation of p-hydroxybenzoylated lignin structures. We reveal that Populus acyltransferase PHBMT1 kinetically preferentially utilizes p-hydroxybenzoyl-CoA to acylate syringyl lignin monomer sinapyl alcohol in vitro. Consistently, disrupting PHBMT1 in Populus via CRISPR/Cas9 gene editing nearly completely depletes p-hydroxybenzoates of stem lignin; conversely, overexpression of PHBMT1 enhances stem lignin p-hydroxybenzoylation, suggesting PHBMT1 functions as a prime monolignol p-hydroxybenzoyltransferase in planta. Altering lignin p-hydroxybenzoylation significantly changes lignin solvent dissolution rate, indictive of its structural significance on lignin physiochemical properties. Identification of monolignol p-hydroxybenzoyltransferase offers a valuable tool for tailoring lignin structure and physiochemical properties and for engineering the industrially important platform chemical in woody biomass.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Calculating Behind-the-Meter Energy Storage Incentives on an Avoided Cost Basis

Behind-the-meter (BTM) energy storage offers the potential for shared investment by utilities and their customers, in which both parties share in the costs and benefits of battery investment. Several utilities and a handful of states have begun providing incentives to help customers purchase BTM energy storage, and in exchange, operate that battery on behalf of the customer to realize grid benefits such as meeting peak capacity needs. But there is wide variation in the value and structure of these incentives, suggesting a lack of clarity on the value of BTM storage to the grid and to non-participating customers who fund the incentives for participating customers. This paper provides an objective framework for establishing BTM energy storage incentives based on the avoided cost of generation from a marginal, gas-fired peaking plant. It also conducts several sensitivity analyses to see how those avoided costs vary with emissions pricing, gas prices, plant heat rates, and utility capital structures. This work may be of use to utilities, regulators, and energy system stakeholders in providing a value-based framework for BTM incentive programs that can be used in the absence of policy guidance.

Twitchell, Jeremy B.↗
DOE OSTI2020

Understanding Microstructural Effects on Dynamic Performance Towards the Development of Shock Metamaterials

With the recent advances in additive manufacturing (AM), long-range periodic lattice assemblies are being developed for vibration and shock mitigation components in aerospace and military applications with unique geometric and topological structures. There has been extensive work in understanding the static properties associated with varying topology of these lattice architectures, but there is almost no understanding of microstructural affects in such structures under high-strain rate dynamic loading conditions. Here we report the shock behavior of lattices with varying intrinsic grain structures achieved by post process annealing. High resolution 316L stainless steel lattices were 3D printed by a laser-powder bed fusion machine and characterized by computed tomography. Subsequent annealing resulted in stress-relieved and recrystallized lattices. Overall the lattices had strong cubic texture aligning with the x-, y- and z-directions of the build with a preference outside the build direction (z). The recrystallized sample had more equiaxed polygonal grains and a layer of BCC ferrite at the surface of the structure approximately 1 grain thick. Upon dynamic compression the as-deposited lattice showed steady compaction behavior while the heat-treated lattices exhibit negative velocity behavior indicative of failure. We attribute this to the stiffer BCC ferrite in the annealed lattices becoming damaged and fragmenting during compression.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Design, Selection, and Evaluation of Reinforcement Learning Single Agents for Ground Target Tracking

Previous approaches for small fixed-wing unmanned air systems that carry strapdown rather than gimbaled cameras achieved satisfactory ground target tracking performance using both standard and deep reinforcement learning algorithms. However, these approaches have significant restrictions and abstractions to the dynamics of the vehicle, such as constant airspeed and constant altitude, because the number of states and actions was necessarily limited. Thus, extensive tuning was required to obtain good tracking performance. The expansion from 4 state–action degrees of freedom to 15 enabled the agent to exploit previous reward functions that produced novel yet undesirable emergent behavior. This paper investigates the causes of and various potential solutions to undesirable emergent behavior in the ground target tracking problem. A combination of changes to the environment, reward structure, action space simplification, command rate, and controller implementation provides insight into obtaining stable tracking results. Consideration is given to reward structure selection and refinement to mitigate undesirable emergent behavior. Results presented in the paper for a simulated environment of a single unmanned air system tracking a randomly moving single ground target show that a soft actor–critic algorithm can produce feasible tracking trajectories without limiting the state space and action space, provided that the environment is properly posed.

Engineering↗
DOE OSTI2021

Lawrence Graduate Research Scholar, Allegra Mayer, 2021 (Final Report)

Carbon storage in tropical forest soil depends on the balance between large C inputs from high rates of productivity, and high rates of soil C loss due to rapid decomposition rates. Disturbances to tropical forests, including severe hurricanes, could result in globally significant fluxes of C either to or from forest soils. Severe hurricane events are increasing in frequency in the tropics, yet the vulnerability of soil carbon to a frequent severe hurricane regime is unknown. By constraining a model with samples from before and after three major hurricanes within thirty years, this study examines the cycling of C between soil pools and with depth, under conditions marked by sudden organic matter pulses, rapid shifts in forest structure, and fast decomposition rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Large scale structure reconstruction with short-wavelength modes

Large scale density modes are difficult to measure because they are sensitive to systematic observational errors in galaxy surveys, but we can study them indirectly by observing their impact on small scale perturbations. Cosmological perturbation theory predicts that second-order density inhomogeneities are a convolution of a short- and a long-wavelength mode. This arises physically because small scale structures grow at different rates depending on the large scale environment in which they reside. This induces an off-diagonal term in the two-point statistics in Fourier space that we use as the basis for a quadratic estimator for the large scale field. Here, we demonstrate that this quadratic estimator works well on an N-body simulation of size (2.5 h -1 Gpc) 3 . In particular, the quadratic estimator successfully reconstructs the long-wavelength modes using only small-scale information. This opens up novel opportunities to study structure on the largest observable scales.

79 ASTRONOMY AND ASTROPHYSICS↗