Search NASA⌕ Search

SEARCH · Search NASA

Results for “recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Spatial U-Pb Age Distribution in Shock-Recrystallized Zircon – A Case Study from the Rochechouart Impact Structure, France

Age determination of impact structures via the zircon U–Pb system remains challenging and often ambiguous due to highly variable effects of shock metamorphism on U-Pb geochronology. It is, therefore, crucial to link the observed zircon microtextures, including their temperature and pressure conditions associated with their formation, directly to the U–Pb ages preserved. Here, we analyzed three recrystallized zircon grains and one plastically deformed zircon crystal from the medium-sized Rochechouart impact structure in the northwestern Massif Central of France. For the Rochechouart impact structure the impact age (206.92 ± 0.32 Ma [40Ar/39Ar]) as well as the 2 tectono-themal history is well established making this study site ideal to test concepts about U-Pb systematics in shocked zircon and to differentiate between shock-driven age resetting and preimpact crystallization and metamorphic overprinting. Zircon microstructures were studied using scanning electron imaging, cathodoluminescence imaging, and electron backscatter diffraction (EBSD) mapping. Further, we conducted U–Pb Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) depth-profiling analysis, allowing us to interpret the resultant age data in discrete steps with increasing ablation time/depth. The U–Pb depth profiling data demonstrate that plastically strained grains are incompletely reset and preserve rim and interior age domains reflecting typical pre-impact (pre-Variscan and Variscan) regional tectonic ages. Our results also reveal that the granular crystals encountered contain microstructural evidence for “former reidite in granular neoblastic” (FRIGN) zircon, reflecting both high-pressure (⩾30GPa) and high temperature (⩾1200℃) conditions. This signifies that FRIGN zircon is now known from an additional, medium sized, impact structure further supporting the hypothesis that this impact induced microstructure is commonly preserved. In addition, FRIGN zircon has a high potential to preserve completely impact-reset crystal domains (~204 to 207 Ma) that can be identified by our combined analytical approach of U–Pb depth profiling and EBSD mapping, and thus are suitable for determining reliable impact ages

U-Pb depth profiling↗

Dynamic Recrystallization Model for Whisker and Hillock Growth

Tin (Sn) whiskers are not a recent development. Studies in the late 1930’s investigated thin filaments that grew spontaneously from Sn coatings used for the corrosion protection of electronic hardware. It was soon recognized that these Sn filaments,or whiskers, could create short circuits in the same electronic equipment. Figure 1a illustrates whisker growth in the hole of a printed circuit board having an immersion Sn surface finish. The engineering solution was to contaminate the Sn with > 3wt.% of lead (Pb). The result was that whisker growth was replaced with hillock formation (Fig. 1b) that posed a minimal reliability concernto electrical circuits. Today, Pb-containing finishes are being replaced with pure Sn coatings to meet environmental restrictions on Pb use. The same short-circuit concerns have been raised, once again, with respect to Sn whiskers. The present authors have taken the approach that, in order to develop more widely applicable, first-principles strategies to mitigate Sn whisker formation, it is necessary to understand the fundamental mechanism(s) and rate kinetics underlying their development. Numerous mechanisms have been proposed by other authors to describe whisker growth, including static recrystallization by Boguslavsky and Bush.

36 MATERIALS SCIENCE↗

Dynamic Recrystallization and Grain Refinement of Fe-P-C-Si and Fe-P-C-Si-N Steels

Grain refinement is an effective technique to improve the mechanical properties of steels. In the present work, single-pass hot compression experiments have been conducted on two different compositions of high phosphorous steels to study the microstructural evolution and ferrite grain refinement at various strain rates and deformation temperatures, i.e., 0.01-10 s{sup −1} and 750-1050 °C, respectively. Optical metallography has been employed to understand the physical processes that take place during hot deformation process. The results indicate that when these compositions of high phosphorous steels are worked at relatively low temperatures in the intercritical regions, a ferrite grain size of 5-7 µm is obtained. It is observed that the grain size decreases with an increase in strain rate and with the decrease in deformation temperature. Based on the values of stress exponent (n) obtained in the present work, dislocation creep is identified as the deformation mechanism. The activation energies for deformation of these two types of high phosphorous steels have been calculated. The effect of the alloying elements on the stress–strain curve, microstructure, and grain refinement has been discussed.

36 MATERIALS SCIENCE↗

Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel

Directed energy deposited (DED) and forged austenitic stainless steels possess dissimilar microstructures but can exhibit similar mechanical properties. In this study, annealing was used to evolve the microstructure of both conventional wrought and DED type 304L austenitic stainless steels, and significant differences were observed. In particular, the density of geometrically necessary dislocations and hardness were used to probe the evolution of the microstructure and properties. Forged type 304L exhibited the expected decrease in measured dislocation density and hardness as a function of annealing temperature. Here, the more complex microstructure–property relationship observed in the DED type 304L material is attributed to compositional heterogeneities in the solidification microstructure.

36 MATERIALS SCIENCE↗

Recrystallization of an amorphized epitaxial phase-change alloy: A phoenix arising from the ashes

Epitaxial Ge{sub 2}Sb{sub 2}Te{sub 5} films grown on Si(111) by molecular beam epitaxy were reversibly switched between crystalline and amorphous states over a large area using femtosecond laser pulses. The structural and spatial homogeneity of the as-grown epitaxial and laser-switched areas on the sample were investigated by synchrotron nanofocus high resolution x-ray diffraction. The investigation clearly demonstrated that the single crystalline metastable cubic phase of Ge{sub 2}Sb{sub 2}Te{sub 5} is restored after switching. No polycrystalline features, not only on the average but even on the nanometer scale of the x-ray beam, were observed.

36 MATERIALS SCIENCE↗

Post-Deposition Recrystallization of Co-Evaporated CuIn x Ga (1-x) Se 2 Films by Bromide Vapor Treatments

CIGS films deposited at 400°C onto molybdenum-coated soda-lime glass substrates by co-evaporation were annealed in InBr 3 vapors or CuBr with Se vapors. The treatments were conducted at 400°C, 450°C, or 500°C for one hour. The InBr 3 treatments above 400°C and CuBr with Se treatments at 500°C resulted in increased grain size, improved crystallinity, and a decrease in Cu 2 Se phase. Annealed samples also exhibited large surface facets. CIGS films deposited at 350°C were also investigated in InBr 3 and CuBr with Se vapors at 450°C for one hour. Furthermore, these treatments resulted in increased grain size and less deviations from the as-deposited composition.

14 SOLAR ENERGY↗

Ex-Situ Recrystallization of CIGS via Metal Halides

Post Deposition Treatments (PDT) have been key to improving the efficiency of CIGS solar cells. While efficiency has continued to increase, for thermal evaporation processes, high substrate temperature and low deposition rates are a necessity. For many chemical processes, chemical vapor transport techniques can be used to both purify and grow both large and pure crystalline compounds. This is often done with a halide species and temperature. Here, by using the substituent metals of CIGS in confluence with a halide, we explored the possibility to grow a CIGS layer at low temperature and fast rate while still having sufficiently high efficiency.

14 SOLAR ENERGY↗

On the Effect of Indium Chloride Dose on the Recrystallization of Cu(In,Ga)Se 2 Thin Films and associated Devices

Cu(In,Ga)Se 2 thin films deposited by a single-stage co-evaporation process at 350 ºC on molybdenum coated soda lime glass substrate were annealed post-deposition in InCl 3 vapor. The amount of InCl 3 and Se was varied. Here, the annealing treatment was done at 450 ºC for 30 minutes. Increase in grain size was observed after the treatment in all cases by X-ray diffraction. Device performance was low, but improved slightly after KCN etching.

14 SOLAR ENERGY↗

Recrystallization and modification of the stainless-steel surface relief under photonic heat load in powerful plasma discharges

Targets made of ITER-grade 316L(N)-IG stainless steel and Russian-grade 12Cr18Ni10Ti stainless steel with a close composition were exposed at the QSPA-T plasma gun to plasma photonic radiation pulses simulating conditions of disruption mitigation in ITER. After a large number of pulses, modification of the stainless-steel surface was observed, such as the formation of a wavy structure, irregular roughness, and cracks on the target surface. X-ray and optic microscopic analyses of targets revealed changes in the orientation and dimensions of crystallites (grains) over a depth of up to 20 μm for 316L(N)-IG stainless steel after 200 pulses and up to 40 μm for 12Cr18Ni10Ti stainless steel after 50 pulses, which is significantly larger than the depth of the layer melted in one pulse (∼10 μm). In a series of 200 tests of ITER-grade 316L(N)-IG ITER stainless steel, a linear increase in the height of irregularity (roughness) with increasing number of pulses at a rate of up to ∼1 μm per pulse was observed. No alteration in the chemical composition of the stainless-steel surface in the series of tests was revealed. A model is developed that describes the formation of wavy irregularities on the melted metal surface with allowance for the nonlinear stage of instability of the melted layer with a vapor/plasma flow above it. A decisive factor in this case is the viscous flow of the melted metal from the troughs to tops of the wavy structure. The model predicts saturation of the growth of the wavy structure when its amplitude becomes comparable with its wavelength. Approaches to describing the observed stochastic relief and roughness of the stainless-steel surface formed in the series of tests are considered. The recurrence of the melting-solidification process in which mechanisms of the hill growth compete with the spreading of the material from the hills can result in the formation of a stochastic relief.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of Post-Deposition Recrystallization Processing via Indium Bromide of Cu(In,Ga)Se2 Thin Films

Cu(In,Ga)Se2 (CIGS) thin films were deposited at low temperature (350 °C) and high rate (10 µm/h) by a single stage process. The effect of post-deposition treatments at 400 °C and 500 °C by indium bromide vapor were studied and compared to the effect of a simple annealing under selenium. Structural, electrical, and chemical analyses demonstrate that there is a drastic difference between the different types of annealing, with the ones under indium bromide leading to much larger grains and higher conductivity. These properties are associated with a modification of the elemental profiles, specifically for gallium and sodium.

14 SOLAR ENERGY↗

Recrystallization of A Shot Peened Single Crystal Nickel-Base Superalloy

Single crystal nickel-base superalloys used as turbine engine airfoils can have much higher creep and thermal fatigue resistance required for blades and vanes than polycrystalline superalloys due to the absence of weak grain boundaries, as well as the low elastic modulus in the [001] single crystal growth direction (Refs. 1 and 2). This has allowed an increase in the turbine rim inlet temperatures for improved performance and efficiency. However, these advantages in performance require constraints on acceptable levels of single crystal defects, such as macroscopic grain boundaries at low angles to the primary grain (i.e., low angle boundaries or LAB), higher angle boundaries, small new grains nucleated at the blade surface (a.k.a. freckles), larger new grains, and also the single crystal blades’ orientation, typically degrees off of the [001] direction and the orientation of a transverse [010] direction with respect to blade geometry. Therefore, single crystal turbine airfoils, which are frequently used with as-cast surfaces, are grain etched and inspected before and after heat treatments to ensure these aspects conform to acceptability limits.

single crystal↗

Revealing a Pathway for Low-Temperature Recrystallization in Germanium

Thermally activated annealing in semiconductors faces inherent limitations, such as dopant diffusion. Here, a nonthermal pathway is demonstrated for a complete structural restoration in predamaged germanium via ionization-induced recovery. By combining experiments and modeling, this study reveals that the energy transfer of only 2.4 keV nm −1 from incident ions to target electrons can effectively annihilate pre-existing defects and restore the original crystalline structure at room temperature. Moreover, it is revealed that the irradiation-induced crystalline-to-amorphous (c/a) transformation in Ge is reversible, a phenomenon previously considered unattainable without additional thermal energy imposed during irradiation. For partially damaged Ge, the overall damage fraction decreases exponentially with increasing fluence. Surprisingly, the recovery process in preamorphized Ge starts with defect recovery outside the amorphous layer and a shrinkage of the amorphous thickness. After this initial stage, the remaining damage decreases slowly with increasing fluence, but full restoration of the pristine state is not achieved. These differences in recovery are interpreted in the framework of structural differences in the initial defective layers that affect recovery kinetics. This study provides new insights on reversing the c/a transformation in Ge using highly-ionizing irradiation and has broad implications across materials science, radiation damage mitigation, and fabrication of Ge-based devices.

athermal recovery↗