Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequence determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Radiation effects on MOS devices - dosimetry, annealing, irradiation sequence, and sources

This paper reports on some investigations of dosimetry, annealing, irradiation sequences, and radioactive sources, involved in the determination of radiation effects on MOS devices. Results show that agreement in the experimental and theoretical surface to average doses support the use of thermo-luminescent dosimeters (manganese activated calcium fluoride) in specifying the surface dose delivered to thin gate insulators of MOS devices. Annealing measurements indicate the existence of at least two energy levels,,s or a activation energies, for recovery of soft oxide MOS devices after irradiation by electrons, protons, and gammas. Damage sensitivities of MOS devices were found to be independent of combinations and sequences of radiation type or energies. Comparison of various gamma sources indicated a small dependence of damage sensitivity on the Cobalt facility, but a more significant dependence in the case of the Cesium source. These results were attributed to differences in the spectral content of the several sources.

Stassinopoulos, E. G.↗
NASA NTRS1992

The quantitative assessment of UV extinction derived from IUE data of giants and supergiants

It is shown here that the UV interstellar extinction towards hot luminous stars can be determined as accurately as for hot main-sequence stars. An atlas of IUE dereddened fluxes is presented for 13 lightly reddened stars within the 1160-3125 A range. The fluxes of these stars how absorption line strengths that allow a rather accurate determination of relative temperatures and luminosities which is more suitable for the determination of UV extinction via the pair method than choosing a comparison star based on quoted optical MK classifications.

Cardelli, Jason A.↗
NASA NTRS1994

Quantitative spectral types for 19 Algol secondaries

Time-resolved spectra of 19 short-period Algol-type binary star systems obtained during total eclipse are used to derive the temperature spectral class of the mass-losing secondary component. The spectral classifications employed a quantitative comparison of the strengths of absorption features in stars of known spectral class with those of the program stars. The luminosity spectral class can not be determined from these data, so both main-sequence and giant stars were used for the comparison. Our spectral types are compared with published types and found to be generally in good agreement, unless the published types are derived from the light curves. The photometrically determined types are systematically later than our directly determined types. This effect is shown also to exist in catalogs of Algol parameters.

Yoon, Tae S.↗
NASA NTRS1989

Coronae on Venus observations and models of origin

The Venera 15/16 spacecraft revealed a number of features of unknown origin including coronae, elongate to circular structures with a complex interior surrounded by an annulus of concentric ridges. Eighteen coronae were identified in Venera 15/16 data of Venus; an additional thirteen possible coronae are found in Pioneer Venus and Arecibo data. Coronae, with maximum widths of 160 to over 650 km, are found primarily in two clusters in the Northern Hemisphere located to the east and west of Ishtar Terra. Another possible cluster is located in Themis Regio in the Southern Hemisphere. The majority of coronae are at least partially raised less than 1.5 km above the surrounding region, and over half are partially surrounded by a peripheral trough. A sequence of events for coronae has been determined through mapping. Prior to corona formation, regional compression or extension creates bands of lineaments along which coronae tend to later form. During the early stages of corona formation, relatively raised topography is produced by uplift and volcanic construction. The evolution of coronae and their general characteristics have been compared to two models of corona origin: hotspots and sinking mantle diapirs. In the hotspot or rising mantle diapir model, heating and melting at depth create uplift at the surface. Uplift is accompanied by central extension, facilitating volcanism. Gravitational relaxation of the uplifted region follows producing the compressional features within the annulus and the peripheral trough. Both models can predict the major characteristics and evolutionary sequence of coronae. The sinking diapir model does predict an early-time low and central compression as well as broadening and shallowing of the peripheral trough with time, all of which are not observed at current data resolution. In addition, the sinking mantle diapir mode predicts more simultaneous formation of the high topography, annulus and trough unlike the hotspot or rising mantle diapir mode. High resolution Magellan data will be used to distinguish between the two models of corona origin.

Stofan, E. R.↗
NASA NTRS2024

Depositional History of the Upper Sequence of the Western Fan: Evidence for Late-Stage Fluvial and Potential Igneous Activity, Jezero Crater, Mars

Within Jezero crater, a 45 km diameter Noachian-aged crater on Mars, the Upper Fan group (UFg) stratigraphy records the youngest interval of sediment deposition via aqueous activity on the western fan. From orbital images, the UFg surface is characterized by ridges interpreted to be associated with channels that can be group based on orientation into distinct elongate and fan-shaped deposits. UFg deposits primarily consist of a sandstone to granule conglomerate facies covered by a lithified boulder conglomerate or dense accumulations of loose boulders along the surface. The coarse-grained nature of UFg deposits and the unconformable contact with the underlying fan stratigraphy suggest that the UFg represents a higher-energy shift from the relatively longer-lived, lower-energy aqueous systems interpreted in underlying fan stratigraphy. The Mars 2020 Perseverance rover encountered the main exposures of the UFg deposits beginning on Sol 755 and has been continuously collecting data along its northwestward traverse across the fan, enabling reconciliation of orbitally-derived geomorphology with in-situ observations from the rover and Ingenuity helicopter. This work represents a combined assessment of the geomorphology and the sedimentology and stratigraphy of the UFg in order to establish its depositional and emplacement history. Determining the origins of the Upper Fan sequence will clarify how, when, and in what order aqueous environments evolved through time within Jezero crater (e.g. crater infill, overflow, breach, and lake level drop;). Finally, this work will provide critical context for the three rock samples within the UFg sample suite.

Mars 2020↗
NASA NTRS1988

Exact computation of the unwrapped phase of a finite-length time series

McGowan and Kuc (1982) showed that a direct relationship between a time series and its unwrapped phase exists. They proposed an algorithm for computing the unwrapped phase by counting the number of sign changes in a Sturm sequence generated from the real and imaginary parts of the discrete Fourier transform. Their algorithm is limited to relatively short sequences by numerical accuracy. An extension of their algorithm is proposed which, by using all-integer arithmetic, permits exact computation of the number of multiples of pi required to determine the unwrapped phase for rational-valued time sequences of arbitrary length. Since the computation is exact, the extended numerical algorithm should be of interest when accurate phase unwrapping is required.

Long, David G.↗
NASA NTRS2017

BioWires: Conductive DNA Nanowires in a Computationally-Optimized, Synthetic Biological Platform for Nanoelectronic Fabrication

DNA is an ideal template for a biological nanowire-it has a linear structure several atoms thick; it possesses addressable nucleobase geometry that can be precisely defined; and it is massively scalable into branched networks. Until now, the drawback of DNA as a conducting nanowire been, simply put, its low conductance. To address this deficiency, we extensively characterize a chemical variant of canonical DNA that exploits the affinity of natural cytosine bases for silver ions. We successfully construct chains of single silver ions inside double-stranded DNA, confirm the basic dC-Ag+-dC bond geometry and kinetics, and show length-tunability dependent on mismatch distribution, ion availability and enzyme activity. An analysis of the absorbance spectra of natural DNA and silver-binding, poly-cytosine DNA demonstrates the heightened thermostability of the ion chain and its resistance to aqueous stresses such as precipitation, dialysis and forced reduction. These chemically critical traits lend themselves to an increase in electrical conductivity of over an order of magnitude for 11-base silver-paired duplexes over natural strands when assayed by STM break junction. We further construct and implement a genetic pathway in the E. coli bacterium for the biosynthesis of highly ionizable DNA sequences. Toward future circuits, we construct a model of transcription network architectures to determine the most efficient and robust connectivity for cell-based fabrication, and we perform sequence optimization with a genetic algorithm to identify oligonucleotides robust to changes in the base-pairing energy landscape. We propose that this system will serve as a synthetic biological fabrication platform for more complex DNA nanotechnology and nanoelectronics with applications to deep space and low resource environments.

DNA↗
NASA NTRS1967

Adaptive filtering Interim report

Adaptive filter with inaccuracies approximated by Gaussian white noise input and determination of covariance for most probable residual sequence

GAUSSIAN NOISE↗
NASA NTRS1972

On the structure of rate 1/n convolutional codes.

It is shown what choice there is in assigning output digits to transitions of binary rate 1/n code trellis so that the latter will correspond to a convolutional code. A new upper bound on free distance of rate 1/n convolutional codes is also derived, and the results obtained are used to determine the length of the largest input sequence that can conceivably result in an output whose weight is equal to the free distance of a code of rate 1/2.

Bahl, L.↗
NASA NTRS1975

The McIDAS system

The man-computer interactive data access system (McIDAS) hardware and software design is outlined, with emphasis on meteorological applications. The McIDAS system features a flexible digital image enhancement device. Theory of operation, the McIDAS language, the McIDAS executive monitor, image acquisition, image parameters, image display, graphics, image navigation, and image massaging are explained. The WINDCO/CLDHGT system, developed to align time sequences of geosynchronous satellite pictures and to determine the motion and height of selected cloud targets, is also described.

Smith, E. A.↗
NASA NTRS1976

The autocorrelation structure of Tausworthe pseudorandom number generators

An algorithm for determining the autocorrelation structure of a new sequence generated from an original sequence by proper decimation (a shift with each q-th term of the original sequence used) is presented, once autocorrelations for any repeating number sequence are known. The autocorrelation structure of the Tausworthe random number generator (RNG), based on proper decimation by q, is accepted as a RNG structure in which a proper decimation generates a long interval over which autocorrelations are small for all shifts. It is shown that if L bits of an N-bit Tausworthe RNG are L-bit binary numbers, L + 1 levels of correlation will exist, and L levels of correlation will each occur twice per RNG cycle length.

Neuman, F.↗
NASA NTRS1977

Measurements of Cumulonimbus Clouds using quantitative satellite and radar data

Results are reported for a preliminary study of SMS-2 digital brightness and IR data obtained at frequent 5-7.5 min intervals. The clouds studied were over the Central and Great Plains in midlatitudes and thus were typical of an environment much different from that of the tropical oceans. The satellite data are compared to radar data for both a severe weather event and weak thundershower activity of the type which might be a target for weather modification efforts. The relative importance of short time interval satellite data is shown for both cases, and possible relationships between the two types of data are presented. It is concluded that (1) using a threshold technique for visible reflected brightness, precipitating vs. nonprecipitating clouds can be discriminated; (2) brightness is well related to cloud size and shape; and (3) satellite-derived growth rates may be a significant parameter to be used in determining storm severity, especially if rapid time sequence data are used during the development phase of the storm.

Negri, A. J.↗
NASA NTRS1979

Multi-level adaptive finite element methods. 1: Variation problems

A general numerical strategy for solving partial differential equations and other functional problems by cycling between coarser and finer levels of discretization is described. Optimal discretization schemes are provided together with very fast general solvers. It is described in terms of finite element discretizations of general nonlinear minimization problems. The basic processes (relaxation sweeps, fine-grid-to-coarse-grid transfers of residuals, coarse-to-fine interpolations of corrections) are directly and naturally determined by the objective functional and the sequence of approximation spaces. The natural processes, however, are not always optimal. Concrete examples are given and some new techniques are reviewed. Including the local truncation extrapolation and a multilevel procedure for inexpensively solving chains of many boundary value problems, such as those arising in the solution of time-dependent problems.

Brandt, A.↗
NASA NTRS1980

Analysis of fatigue damage in composite laminates

An attempt is made to give a comprehensive characterization of processes of degradation in type 1 and 2 laminated composites under cyclic (fatigue) loading; based on the discovery of a 'characteristic damage state' that forms independently of load history and is determined by laminae properties, orientation and stacking sequence alone. The detailed nature of this state, its formation and its influence on strength, life and stiffness, is discussed.

Reifsnider, K. L.↗
NASA NTRS1984

Mathematical Simulation of Flight Maneuvers

Mathematical model simulates response of spin-stabilized spacecraft to commanded thruster pulses, using set of equations based on known inertial properties of vehicle and previously-determined thrustor performance. Model used to generate sequence of thrustor commands to accomplish specified maneuver.

Frauenholz, R. B.↗
NASA NTRS1987

Ultraviolet interstellar extinction toward NGC 6530 and the intrinsic energy distribution of 9 Sagittarii and HD 165052

The ultraviolet interstellar extinction curve is determined toward 12 early B main-sequence stars and one O8 V star in NGC 6530. The extinction is found to be uniform across the cluster. At short wavelengths, the extinction curve of NGC 6530 falls below the average Galactic curve by a full magnitude, indicating that the population of small grains relative to larger grains is lower than normal. Longward of 2830 A the curve is almost coincident with the mean Galactic curve. The 2175 A feature is narrower than the average. The derived extinction curve is used to deredden the observed fluxes of two early O-type stars in NGC 6530:9 Sgr and HD 165052. The intrinsic continua are compared to model atmospheres in the region 1200-8200 A. The LTE, line-blanketed models of Kurucz (1979) fit the observations better than the non-LTE, unblanketed models of Mihalas (1972) suggesting that line-blanketing effects are more important than the non-LTE effects in the atmospheres of these stars. The temperatures of the models that best fit the observations are lower than the Zanstra temperatures and the temperatures estimated from the strengths of the He I and He II lines, by 10,000 to 20,000 K.

Torres, Ana V.↗
NASA NTRS1988

Magnetic fine structure of solar coronal loops

A numerical simulation of the effect of a random photospheric flow on the magnetic structure of a coronal loop is presented. An initially uniform field embedded in a perfectly conducting plasma is assumed, extending between two flat parallel plates representing the solar photosphere at both ends of the loop. The field is perturbed by a sequence of randomly phased, sinusoidal flow patterns applied at one of the boundary plates, and the corresponding sequence of force-free fields is determined. It is found that the electric currents generated by these flows develop a fine structure on a scale significantly smaller than the wavelength of the velocity patterns. This suggests that magnetic energy is transferred to smaller scale via a cascade process.

Van Ballegooijen, A. A.↗
NASA NTRS1991

The propagation characteristics of the plate modes of acoustic emission waves in thin aluminum plates and thin graphite/epoxy composite plates and tubes

Acoustic emission was interpreted as modes of vibration in plates. Classical plate theory was used to predict dispersion curves for the two fundamental modes and to calculate the shapes of flexural waveforms produced by vertical step function loading. There was good agreement between theoretical and experimental results for aluminum. Composite materials required the use of a higher order plate theory (Reissner-Mindlin) to get good agreement with the measured velocities. Four composite plates with different laminate stacking sequences were studied. The dispersion curves were determined from phase spectra of the time dependent waveforms. Plate modes were shown to be useful for determining the direction of source motion. Aluminum plates were loaded by breaking a pencil lead against their surface. By machining slots at angles to the plane of a plate, the direction in which the force acted was varied. Changing the source motion direction produced regular variations in the waveforms. To demonstrate applicability beyond simple plates, waveforms produced by lead breaks on a thin walled composite tube were also shown to be interpretable as plate modes. The tube design was based on the type of struts proposed for Space Station Freedom's trussed structures.

Prosser, William H.↗