Search NASA⌕ Search

SEARCH · Search NASA

Results for “sequential sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Laser speckle technique for burner liner strain measurements

Thermal and mechanical strains were measured on samples of a common material used in jet engine burner liners, which were heated from room temperature to 870 C and cooled back to 220 C, in a laboratory furnance. The physical geometry of the sample surface was recorded at selected temperatures by a set of 12 single exposure speckle-grams. Sequential pairs of specklegrams were compared in a heterodyne interferometer which give high precision measurement of differential displacements. Good speckle correlation between the first and last specklegrams is noted which allows a check on accumulate errors.

Stetson, K. A.↗
NASA NTRS2013

Polarization Imaging Apparatus with Auto-Calibration

A polarization imaging apparatus measures the Stokes image of a sample. The apparatus consists of an optical lens set, a first variable phase retarder (VPR) with its optical axis aligned 22.5 deg, a second variable phase retarder with its optical axis aligned 45 deg, a linear polarizer, a imaging sensor for sensing the intensity images of the sample, a controller and a computer. Two variable phase retarders were controlled independently by a computer through a controller unit which generates a sequential of voltages to control the phase retardations of the first and second variable phase retarders. A auto-calibration procedure was incorporated into the polarization imaging apparatus to correct the misalignment of first and second VPRs, as well as the half-wave voltage of the VPRs. A set of four intensity images, I(sub 0), I(sub 1), I(sub 2) and I(sub 3) of the sample were captured by imaging sensor when the phase retardations of VPRs were set at (0,0), (pi,0), (pi,pi) and (pi/2,pi), respectively. Then four Stokes components of a Stokes image, S(sub 0), S(sub 1), S(sub 2) and S(sub 3) were calculated using the four intensity images.

Zou, Yingyin Kevin↗
NASA NTRS2009

Improved Signal Chains for Readout of CMOS Imagers

An improved generic design has been devised for implementing signal chains involved in readout from complementary metal oxide/semiconductor (CMOS) image sensors and for other readout integrated circuits (ICs) that perform equivalent functions. The design applies to any such IC in which output signal charges from the pixels in a given row are transferred simultaneously into sampling capacitors at the bottoms of the columns, then voltages representing individual pixel charges are read out in sequence by sequentially turning on column-selecting field-effect transistors (FETs) in synchronism with source-follower- or operational-amplifier-based amplifier circuits. The improved design affords the best features of prior source-follower-and operational- amplifier-based designs while overcoming the major limitations of those designs. The limitations can be summarized as follows: a) For a source-follower-based signal chain, the ohmic voltage drop associated with DC bias current flowing through the column-selection FET causes unacceptable voltage offset, nonlinearity, and reduced small-signal gain. b) For an operational-amplifier-based signal chain, the required bias current and the output noise increase superlinearly with size of the pixel array because of a corresponding increase in the effective capacitance of the row bus used to couple the sampled column charges to the operational amplifier. The effect of the bus capacitance is to simultaneously slow down the readout circuit and increase noise through the Miller effect.

Pain, Bedabrata↗
NASA NTRS2012

A Risk-Constrained Multi-Stage Decision Making Approach to the Architectural Analysis of Mars Missions

This paper presents a novel risk-constrained multi-stage decision making approach to the architectural analysis of planetary rover missions. In particular, focusing on a 2018 Mars rover concept, which was considered as part of a potential Mars Sample Return campaign, we model the entry, descent, and landing (EDL) phase and the rover traverse phase as four sequential decision-making stages. The problem is to find a sequence of divert and driving maneuvers so that the rover drive is minimized and the probability of a mission failure (e.g., due to a failed landing) is below a user specified bound. By solving this problem for several different values of the model parameters (e.g., divert authority), this approach enables rigorous, accurate and systematic trade-offs for the EDL system vs. the mobility system, and, more in general, cross-domain trade-offs for the different phases of a space mission. The overall optimization problem can be seen as a chance-constrained dynamic programming problem, with the additional complexity that 1) in some stages the disturbances do not have any probabilistic characterization, and 2) the state space is extremely large (i.e, hundreds of millions of states for trade-offs with high-resolution Martian maps). To this purpose, we solve the problem by performing an unconventional combination of average and minimax cost analysis and by leveraging high efficient computation tools from the image processing community. Preliminary trade-off results are presented.

entry, descent, and landing (EDL)↗
DOE OSTI2017

Environmental Risk Implications of Metals in Sludges from Waste Water Treatment Plants: The Discovery of Vast Stores of Metal-Containing Nanoparticles

Nanoparticle (NP) assessment in sludge materials, although of growing importance in eco- and biotoxicity studies, is commonly overlooked and, at best, understudied. In the present study, sewage sludge samples from across the mega-city of Shanghai, China were investigated for the first time using a sequential extraction method coupled with single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) to quantify the abundance of metal-containing NPs in the extraction fractions and transmission electron microscopy to specifically identify the nanophases present. In general, most sludges observed showed high concentrations of Cr, Cu, Cd, Ni, Zn, and Pb, exceeding the maximum permitted values in the national application standard of acid soil in China. NPs in these sludges contribute little to the volume and mass but account for about half of the total particle number. Based on electron microscopy techniques, various NPs were further identified, including Ti-, Fe-, Zn-, Sn-, and Pb-containing NPs. All NPs, ignored by traditional metal risk evaluation methods, were observed at a concentration of 107 -1011 particles/g within the bioavailable fraction of metals. These results indicate the underestimate or misestimation in evaluating the environmental risks of metals based on traditional sequential extraction methods. A new approach for the environmental risk assessment of metals, including NPs, is urgently needed.

Oxides, Metals, Nanoparticles, Sludges↗
NASA NTRS1983

The use of heterodyne speckle photogrammetry to measure high-temperature strain distributions

Thermal and mechanical strains have been measured on samples of a common material used in jet engine burner liners, which were heated from room temperature to 870 C and cooled back to 220 C, in a laboratory furnace. The physical geometry of the sample surface was recorded to select temperatures by means of a set of twelve single-exposure specklegrams. Sequential pairs of specklegrams were compared in a heterodyne interferometer which allowed high-precision measurement of differential displacements. Good speckle correlation was observed between the first and last specklegrams also, which showed the durability of the surface microstructure, and permitted a check on accumulated errors. Agreement with calculated thermal expansion was to within a few hundred microstrain over a range of fourteen thousand.

Stetson, K. A.↗
NASA NTRS2009

Integrated Miniature Arrays of Optical Biomolecule Detectors

Integrated miniature planar arrays of optical sensors for detecting specific biochemicals in extremely small quantities have been proposed. An array of this type would have an area of about 1 cm2. Each element of the array would include an optical microresonator that would have a high value of the resonance quality factor (Q . 107). The surface of each microresonator would be derivatized to make it bind molecules of a species of interest, and such binding would introduce a measurable change in the optical properties of the microresonator. Because each microresonator could be derivatized for detection of a specific biochemical different from those of the other microresonators, it would be possible to detect multiple specific biochemicals by simultaneous or sequential interrogation of all the elements in the array. Moreover, the derivatization would make it unnecessary to prepare samples by chemical tagging. Such interrogation would be effected by means of a grid of row and column polymer-based optical waveguides that would be integral parts of a chip on which the array would be fabricated. The row and column polymer-based optical waveguides would intersect at the elements of the array (see figure). At each intersection, the row and column waveguides would be optically coupled to one of the microresonators. The polymer-based waveguides would be connected via optical fibers to external light sources and photodetectors. One set of waveguides and fibers (e.g., the row waveguides and fibers) would couple light from the sources to the resonators; the other set of waveguides and fibers (e.g., the column waveguides and fibers) would couple light from the microresonators to the photodetectors. Each microresonator could be addressed individually by row and column for measurement of its optical transmission. Optionally, the chip could be fabricated so that each microresonator would lie inside a microwell, into which a microscopic liquid sample could be dispensed.

Iltchenko, Vladimir↗
NASA NTRS2017

Computationally Efficient Motion Planning Algorithms for Agile Autonomous Vehicles in Cluttered Environments

Fast, real-time motion planning of an agile, autonomous vehicle in a cluttered environment, with many geometrically-fixed obstacles, is a very complex problem, especially because of the vehicle dynamics constraints and resource constrained computational capabilities onboard the vehicle. In this paper, we present computationally-efficient versions of our novel motion planning algorithm called the Spherical Expansion and Sequential Convex Programming (SE–SCP) algorithm. The SE–SCP algorithm first uses a spherical-expansion-based randomized sampling algorithm to explore the workspace. Oncea path is found from the start position to the goal position, the algorithm computes a locally optimal trajectory, within its homotopy class for a desired cost function, by solving a sequence of convex optimization problems. Thus, the SE–SCP algorithm is anytime locally optimal and the trajectory is globally optimal if the number of samples tends to infinity. In this paper, we further enhance the computational efficiency of the SE–SCP algorithm using uni-directional and bi-directional rewiring techniques. We also present a detailed proof of the local optimality characteristics of the new SE–SCP algorithms for aspecial case of vehicle dynamics. Simulation examples involving quadrotor and spacecraft help demonstrate the effectiveness of our new algorithms.

Bandyopadhyay, Saptarshi↗
DOE OSTI2016

Zinc Corrosion in Borated, Buffered Post-LOCA Solutions

This current research provides a broad assessment of recently evaluated zinc corrosion in simulated non-buffered and buffered post-LOCA solution as a function of pH, temperature, velocity, boron concentration and surface area. Corrosion rates obtained can be used for further zinc borate formation analysis or to plan further zinc corrosion studies. Experiments are conducted utilizing a three-electrode electrochemical system in a glass cell. Aqueous solutions used in testing simulate reactor containment building (RCB) pool water under various LOCA scenarios that are representative of US PWR RCB pool water: boric acid only, boric acid with trisodium phosphate, boric acid with sodium hydroxide, and boric acid with sodium tetraborate. The specimens used in this work are machined from 99.6% pure zinc rods that are used as a surrogate for the high purity zinc layer of galvanized steel. Prior to the experiment, the specimens are first polished and then left exposed to the atmosphere for approximately one day at room temperature. Prior to each test, the zinc specimen are sequentially rinsed with deionized water and acetone, and then dried by evaporation in air at room temperature. Prepared samples are then mounted in the glass cell test apparatus and rotated on a spindle at a desired velocity for a specified duration. Instantaneous corrosion rate as a function of time and total zinc mass corroded, which may either be released into solution or incorporated into surface scale, is determined by electrochemical impedance spectroscopy (EIS) analysis. Corrosion rates after 24 hours of immersion are determined from a full potential dynamic scan and from weight loss measurements of descaled post-test samples. The solution zinc concentration resulting from zinc corrosion is determined by inductively coupled plasma optical emission spectroscopy (ICP-OES). Preliminary results show that zinc corrosion with a zinc surface area-to-liquid volume ratio of 0.0003 m2/L in a borated, buffered solution (55 deg. C, pH 7.2) exposed to a velocity of 0.5 ft/s is between 4.9 X to 2.3 X less than that obtained by the Kyrk et al study, which examines a lower temperature, lower pH with a 5.5 X larger surface area-to-volume ratio. This initial finding suggests that the corrosion of zinc, which supplies a zinc source term to form zinc borates, may not be insignificant under conditions of interest (borated, buffered post-LOCA solutions). Further experiments are currently underway that evaluate the influence of pH, velocity, temperature, buffer type, boron concentration and surface area-to-volume ratio on zinc corrosion. Preliminary results suggest two of the three buffer types examined as conditions of interest to US PWRs likely produce zinc corrosion within the range observed by Kyrk et al. Current preliminary results indicate that buffer type, temperature, pH and velocity each have an impact on the zinc corrosion rate. Quantification of zinc mass lost to solution and incorporated into scale is currently underway, as is the characterization of velocity and boric acid effects on zinc corrosion.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Optical Analysis of Transparent Polymeric Material Exposed to Simulated Space Environment

Many innovations in spacecraft power and propulsion have been recently tested at NASA, particularly in non-chemical propulsion. One improvement in solar array technology is solar concentration using thin polymer film Fresnel lenses. Weight and cost savings were proven with the Solar Concentrator Arrays with Refractive Linear Element Technology (SCARLET)-II array on NASA's Deep Space I spacecraft. The Fresnel lens concentrates solar energy onto high-efficiency solar cells, decreasing the area of solar cells needed for power. Continued efficiency of this power system relies on the thin film's durability in the space environment and maintaining transmission in the 300 - 1000 nm bandwidth. Various polymeric materials have been tested for use in solar concentrators, including Lexan(TM), polyethylene terephthalate (PET), several formulations of Tefzel(Tm) and Teflon(TM), and DC 93-500, the material selected for SCARLET-II. Also tested were several innovative materials including Langley Research Center's CPI and CP2 polymers and atomic oxygen- resistant polymers developed by Triton Systems, Inc. The Environmental Effects Group of the Marshall Space Flight Center's Materials, Processes, and Manufacturing Department exposed these materials to simulated space environment and evaluated them for any change in optical transmission. Samples were exposed to a minimum of 1000 equivalent Sun hours of near-UV radiation (250 - 400 nm wavelength). Materials that appeared robust after near-UV exposure were then exposed to charged particle radiation equivalent to a five-year dose in geosynchronous orbit. These exposures were performed in MSFC's Combined Environmental Effects Test Chamber, a unique facility with the capability to expose materials simultaneously or sequentially to protons, low-energy electrons, high-energy electrons, near UV radiation and vacuum UV radiation. Reflectance measurements can be made on the samples in vacuum. Prolonged exposure to the space environment will decrease the polymer film's transmission and thus reduce the conversion efficiency. A method was developed to normalize the transmission loss and thus rank the materials according to their tolerance to space environmental exposure. Spectral results and the material ranking according to transmission loss are presented.

Edwards, David L.↗
DOE OSTI2015

Topological insulator thin films starting from the amorphous phase-Bi{sub 2}Se{sub 3} as example

We present a new method to obtain topological insulator Bi{sub 2}Se{sub 3} thin films with a centimeter large lateral length. To produce amorphous Bi{sub 2}Se{sub 3} thin films, we have used a sequential flash-evaporation method at room temperature. Transmission electron microscopy has been used to verify that the prepared samples are in a pure amorphous state. During annealing, the samples transform into the rhombohedral Bi{sub 2}Se{sub 3} crystalline structure which was confirmed using X-ray diffraction and Raman spectroscopy. Resistance measurements of the amorphous films show the expected Mott variable range hopping conduction process with a high specific resistance compared to the one obtained in the crystalline phase (metallic behavior). We have measured the magnetoresistance and the Hall effect at different temperatures between 2 K and 275 K. At temperatures T ≲ 50 K and fields B ≲ 1 T, we observe weak anti-localization in the MR; the Hall measurements confirm the n-type character of the samples. All experimental results of our films are in quantitative agreement with results from samples prepared using more sophisticated methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Effect of helium on dispersoid evolution under self-ion irradiation in a dual-phase 12Cr oxide-dispersion-strengthened alloy

As one candidate alloy for future Generation IV and fusion reactors, a dual-phase 12Cr oxide-dispersion-strengthened (ODS) alloy was developed for high temperature strength and creep resistance and has shown good void swelling resistance under high damage self-ion irradiation at high temperature. However, the effect of helium and its combination with radiation damage on oxide dispersoid stability needs to be investigated. In this study, 120 keV energy helium was preloaded into specimens at doses of 1 × 10 15 and 1 × 10 16 ions/cm 2 at room temperature, and 3.5 MeV Fe self-ions were sequentially implanted to reach 100 peak displacement-per-atom at 475 °C. He implantation alone in the control sample did not affect the dispersoid morphology. After Fe ion irradiation, a dramatic increase in density of coherent oxide dispersoids was observed at low He dose, but no such increase was observed at high He dose. The study suggests that helium bubbles act as sinks for nucleation of coherent oxide dispersoids, but dispersoid growth may become difficult if too many sinks are introduced, suggesting that a critical mass of trapping is required for stable dispersoid growth.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Monolithic four-quadrant multiplier

Integrated configuration for "differential" sequential processor is less susceptible to noise than one using discrete components. Accuracy of version is unaffected by sample-and-hold (S/H) acquisition speed, S/H droop rate, and stray pickup by separate card-mounted parts.

Lampe, D. R.↗
DOE OSTI2015

Kinetics study of the evolution of oxygen-related defects in mono-crystalline silicon subjected to electron-irradiation and thermal treatment

The diffusion and dissociation mechanisms governing the evolution of oxygen and vacancy-oxygen defects in Czochralski-grown Si samples have been studied. The samples were irradiated at (i) room temperature or (ii) elevated temperature (350 °C) by MeV electrons and then isothermally annealed at 8 different temperatures in the range of 300 °C to 500 °C. The evolution of the concentrations of oxygen complexes (O{sub n}, n ≤ 3) and mono-vacancy-oxygen defects (VO{sub n}, n ≤ 4) have been followed by infrared absorption measurements of local vibrational modes originating from the individual defects. The experimental kinetics data have been compared with simulation results based on the theory for diffusion limited reactions, assuming a model where sequential build-up of the VO{sub n} defects is a key ingredient. A close quantitative agreement is obtained for both sets of samples despite quite different initial conditions prior to the annealing, which adds evidence to the validity of the model. Values for the diffusivity and dissociation rates of VO{sub n} (n ≤ 4) and O{sub n} (n ≤ 3) have been deduced and in general, the mobility and stability of VO{sub n} decrease and increase with n, respectively. For all the defects, partial dissociation appears as a prevailing process during diffusion, while full dissociation of VO{sub n} is limited by an energy barrier identical to that of interstitial oxygen (O{sub i}) diffusion (∼2.55 eV). The oxygen dimer and trimer are fast diffusers but slower than substitutional oxygen, i.e., VO; VO is found to be the most mobile species, whilst O{sub i} is the slowest one with a difference in diffusivity of up to 7 orders of magnitude in the studied temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Commissioning of a two-target DC cylindrical magnetron sputter coater for depositing Nb 3 Sn film on Nb superconducting radiofrequency cavities

A DC cylindrical magnetron sputter coater was commissioned and used to coat Nb 2.6 GHz superconducting radiofrequency (SRF) cavity with Nb 3 Sn. The sputter coater has two identical cylindrical magnetrons that can move, with a controlled speed, along the axis of the SRF cavity to coat the inside surface of the cavity. The design of the sputter coater is discussed, along with its performance. Initially, a sample holder that allows coating on flat substrates at positions similar to the equator and beam tubes of a 2.6 GHz SRF cavity was used to test conditions for fabricating Nb 3 Sn layers. Multilayers of Nb and Sn were sequentially sputtered on flat Nb and sapphire substrates mounted on the equivalent positions of the cavity's beam tubes and the equator using the two identical cylindrical magnetrons. Then, the Nb/Sn multilayers were annealed at 950 °C for 3 h. Here, the ~1.2 μm thick Nb 3 Sn film did not show any other Nb–Sn compounds and had a superconducting transition temperature of 17.61–17.76 K. The 2.6 GHz SRF cavity was coated using similar conditions as flat samples. Cryogenic RF testing of the Nb 3 Sn-coated cavity demonstrated a quality factor of 3.2 × 10 8 at an accelerating gradient of 5 MV/m at 4.4 K.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Sodium silicate treatment for uranium (vi) bearing groundwater systems at f/h area at savannah river site - 15709

The Savannah River Site (SRS) was one of the most significant manufacturing facilities during the Cold War era for producing nuclear materials. At the end of the Cold War, the Site's mission changed to support the environmental restoration of the Site due to over six decades of research, development, and production of nuclear weapons. Currently SRS is a major hazardous waste management facility responsible for nuclear materials storage, and remediation of contaminated soil and groundwater from radionuclides. This research focuses on controlling the mobilization of the contaminants, specifically uranium (VI) located in groundwater plumes at the Site's F/H Area Seepage Basin, where approximately 1.8 billion gallons of hazardous waste were deposited. Objective: To evaluate the potential use of sodium silicate for uranium removal from the aqueous phase, as well as to restore the pH of the treatment zone. Adding sodium silicate increases the pH of the treatment zone and uranium precipitation is achieved, therefore immobilizing the contaminant. Through a series of experiments the optimal concentration of sodium silicate was investigated. Part 1: An experiment was conducted in order to determine the effect of sodium silicate on the pH of a solution containing Savannah River Site soil and synthetic groundwater replicated after the Site's natural groundwater composition. Each sample was spiked with the appropriate volume from the sodium silicate stock solution in order to achieve final desired sodium silicate concentrations of 10, 20, 40,50,60,70, and 80 parts per million. The samples were placed on a platform shaker for three days during which pH readings were collected in regular intervals to determine which silicate concentration produced a pH in the neutral range (6 > pH < 8). Part 2: A sequential experiment was conducted specifically using 40 and 50 ppm of sodium silicate with Savannah River Site soil, synthetic groundwater, and 0.5 ppm of uranium (VI), in order to investigate the removal of uranium in the aqueous phase via precipitation. Samples were extracted and categorized into a filtered and non-filtered control group. Each sample was diluted 1:20 with 1% nitric acid and analyzed using the Kinetic Phosphorescence Analyzer (KPA) in order to measure uranium concentrations in the supernatant. By measuring the concentration of uranium in the supernatant the percent removal is obtained for the comparison between the filtered and non-filtered samples, revealing the amount of uranium precipitation that occurred for each silicate concentration. Results: A sodium silicate concentration of between 40-50 ppm proved ideal for achieving uranium precipitation and creating a circum-neutral pH environment in the aqueous phase. 50 ppm achieved the larger percent of uranium precipitation with a range of 30-50% removal for the filtered samples and between 60-95% removal for the non-filtered samples. A large difference between the removal of filtered and non- filtered samples from the same day was observed for both sodium silicate concentrations tested, indicating that there is a considerable amount of uranium species retained in the filter. The addition of sodium silicate proved effective in the removal of uranium precipitation from the aqueous phase. Future work: Determine potential re-solubilization of uranium concentrations; Examine mineralogy and surface morphology of dried precipitate using XRD and SEM/EDS.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2019

Surrogate Modeling and Optimization of a Combustor with an Interdigitated Flushwall Injector

Design and Analysis of Computer Experiments (DACE) methods are applied and used to perform surrogate modeling and optimization of a simplified combustor flowpath with an interdigitated flushwall injector. The objectives of the optimization are the thrust potential and combustion efficiency, which are evaluated across a range of flight Mach numbers, duct heights, spanwise spacings, and injection angles. The focus of this work is to highlight the application of a sequential learning approach, in order to learn about the responses of the objective functions over the design space and to identify local regions of interest for further analysis. This approach is contrasted to a previous effort where only a single sampling set was used to fit surrogate models and perform optimization. The optimal solutions resulting from the previous and present approaches are different, due to surrogate model-guided local refinement of the design space allowed by the sequential learning method. The values of the global error estimates between the previous and present approaches are comparable, but the sequential method proved more computationally cost-effective. Further refinement in the optimal regions might be needed to improve predictive capability of surrogate models and to obtain the optimal solutions sets.

Rajiv R Shenoy↗
DOE OSTI2020

Ghost imaging second harmonic generation microscopy

Second harmonic generation (SHG) microscopy is useful for visualizing interfaces and sub-structures within a wide range of materials due to the propensity for SHG to occur in non-centrosymmetric environments. However, since SHG is a nonlinear process generally necessitating small focal sizes for higher peak powers, a raster scanning approach is usually needed to build an SHG image over a significant sample size. While raster scanning is effective, there is a cost in terms of the time needed to acquire the image and, also, some materials cannot withstand the higher optical intensities within the small focal volume. As such, we describe a SHG microscopy approach based on ghost imaging (GI), which enables imaging data to be collected in parallel rather than sequentially as in raster scanning techniques. We experimentally demonstrate the approach and combine GI-SHG with compressive sensing to make further substantial gains in reducing the amount of sampling required for image reconstruction. Furthermore, GI-SHG is shown to have significant advantages for imaging in highly scattering environments, partly because GI is a background-free approach requiring spatial correlations between photons that travel two paths, with one path entirely devoid of sample interaction. This basic property of GI means that only the photons that travel unimpeded through the sample preserve the spatial correlations needed to reconstruct the image, while more scattered photons do not contribute to the overall GI signal. Finally, we compare the image quality and sampling properties of three different reconstruction algorithms used for compressive sensing.

47 OTHER INSTRUMENTATION↗