Search NASA⌕ Search

SEARCH · Search NASA

Results for “single perovskite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

350 ps Ultrafast room-temperature scintillation realized on CsPbBr 3 -based single crystals via Br 2 over-doping

Ultrafast scintillators are essential for next-generation radiation detection, positron emission tomography, and high-speed medical imaging. All-inorganic CsPbBr 3 perovskites are attractive candidates because of their high stopping power, and excellent optical quality, yet their long carrier lifetimes result in slow scintillation responses on the order of hundreds of nanoseconds. Here, we demonstrate that controlled over-doping with Br 2 produces CsPbBr 3.03 single crystals with sub-nanosecond scintillation at room temperature while preserving crystal quality. Single crystals grown by the Bridgman method exhibit high transparency and maintain the orthorhombic perovskite structure. Br 2 over-doping induces a slight lattice expansion (about 0.42% increase in unit-cell volume) while maintaining the orthorhombic perovskite phase and high optical transparency. Optical absorption reveals a slight redshift of the absorption edge after Br 2 introduction, indicating a modified defect landscape. Time-resolved photoluminescence and radioluminescence measurements show that Br 2 doping creates dense and efficient recombination centers that reduce the scintillation decay time from more than 100 ns in undoped crystals to 350 ps under 5.486 MeV α-particle excitation, and the scintillation decay time decreases by two orders of magnitude. The doped crystals also achieve a spatial resolution of 12 lp mm −1 in X-ray imaging. These results reveal a defect-engineering route for achieving ultrafast scintillation in halide perovskites and highlight the potential of Br 2 -modified CsPbBr 3 for fast timing applications.

Li, Zongxiao [Chinese Academy of Sciences (CAS), N↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural and Optical Properties of High Entropy (La,Lu,Y,Gd,Ce)AlO 3 Perovskite Thin Films

Mixtures of Ce-doped rare-earth aluminum perovskites are drawing a significant amount of attention as potential scintillating devices. However, the synthesis of complex perovskite systems leads to many challenges. Designing the A-site cations with an equiatomic ratio allows for the stabilization of a single-crystal phase driven by an entropic regime. This work describes the synthesis of a highly epitaxial thin film of configurationally disordered rare-earth aluminum perovskite oxide (La 0.2 Lu 0.2 Y 0.2 Gd 0.2 Ce 0.2 )AlO 3 and characterizes the structural and optical properties. The thin films exhibit three equivalent epitaxial domains having an orthorhombic structure resulting from monoclinic distortion of the perovskite cubic cell. An excitation of 286.5 nm from Gd 3+ and energy transfer to Ce 3+ with 405 nm emission are observed, which represents the potential for high-energy conversion. These experimental results also offer the pathway to tunable optical properties of high-entropy rare-earth epitaxial perovskite films for a range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Halide Perovskites Breathe Too: The Iodide–Iodine Equilibrium and Self-Doping in Cs 2 SnI 6

The response of an oxide crystal to the atmosphere can be personified as breathing-a dynamic equilibrium between O 2 gas and O 2– anions in the solid. We characterize the analogous defect reaction in an iodide double-perovskite semiconductor, Cs 2 SnI 6 . Here, I 2 gas is released from the crystal at room temperature, forming iodine vacancies. The iodine vacancy defect is a shallow electron donor and is therefore ionized at room temperature; thus, the loss of I2 is accompanied by spontaneous n-type self-doping. Conversely, at high I 2 pressures, I 2 gas is resorbed by the perovskite, consuming excess electrons as I 2 is converted to 2I – . Halide mobility and irreversible halide loss or exchange reactions have been studied extensively in halide perovskites. However, the reversible exchange equilibrium between iodide and iodine [2I – (s) ↔ I 2(g) + 2e – ] described here has often been overlooked in prior studies, though it is likely general to halide perovskites and operative near room temperature, even in the dark. An analysis of the 2I – (s) /I 2(g) equilibrium thermodynamics and related transport kinetics in single crystals of Cs 2 SnI 6 therefore provides insight toward achieving stable composition and electronic properties in the large family of iodide perovskite semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites

Two-dimensional halide perovskites exhibit rich structural diversity and tunable optoelectronic properties, making them promising materials for energy, sensing, and photonic applications. In this work, we report the structural mapping of four distinct polymorphs, γ (P2 1 /c), β (P4/mbm), α (P4/mmm), and δ (Cmcm) in the two-dimensional iodoplumbate, iodostannate, and iodogermanate perovskite so-called Dion-Jacobson series (3AMP)MI4 (M = Sn, Pb, Ge), where 3AMP is 3-(aminomethyl)piperidinium. The phases exhibit systematic evolution in octahedral distortion, lattice symmetry, and metal–halide geometry, enabling structural control over optoelectronic properties. Notably, the α-phase of (3AMP)SnI 4 represents a rare, ambient-stable, high-symmetry structure for Sn-based perovskites, without a phase transition down to 100 K. Variable-temperature single-crystal diffraction, powder x-ray diffraction (PXRD), and calorimetry reveal metal- and temperature-dependent polymorph interconversions, including the emergence of long range supercell reflections in Pb-rich compositions at low temperature. Optical spectroscopy and photoelectron yield spectroscopy confirm band gap tunability and band alignment trends, highlighting symmetry-dependent shifts and anomalous band gap bowing in mixed-metal systems, verified by electronic structure calculations. Calculations additionally indicate that the higher symmetry phases have reduced electron and hole effective masses compared to the lower symmetry phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A-Cation-Dependent Structure–Optical Property Relationships of Halide Perovskite Heterostructures with Complex Interfaces

Halide perovskite heterostructures offer promising interfacial interactions for energy conversion, yet challenges in synthesizing structurally well-defined systems limit detailed investigations into structure–property relationships. In this article, we report the synthesis of compositionally controlled 3D/3D and 3D/2D halide perovskite heterostructures using evaporation crystallization-polymer pen lithography (EC-PPL) and a single-particle analysis of their properties. By systematically varying A-site cation combinations and crystal dimensions, we show that heterointerfaces induce local lattice distortions that modulate vibrational dynamics and electron-phonon coupling. These interfacial effects result in significantly extended carrier lifetimes compared to compositionally similar pure phases. Raman spectroscopy, temperature-dependent photoluminescence, and power-dependent emission analysis reveal that localized structural modulations at the interface govern exciton-phonon interactions. These effects are magnified in smaller crystals due to increased interfacial contributions. Our findings highlight the critical role of interface-driven lattice control in tuning the optoelectronic properties of halide perovskites and provide design principles for engineering heterostructures in next-generation optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Improved charge extraction in inverted perovskite solar cells with dual-site-binding ligands

Inverted (pin) perovskite solar cells (PSCs) afford improved operating stability in comparison to their nip counterparts but have lagged in power conversion efficiency (PCE). The energetic losses responsible for this PCE deficit in pin PSCs occur primarily at the interfaces between the perovskite and the charge-transport layers. Additive and surface treatments that use passivating ligands usually bind to a single active binding site: This dense packing of electrically resistive passivants perpendicular to the surface may limit the fill factor in pin PSCs. We identified ligands that bind two neighboring lead(II) ion (Pb 2+ ) defect sites in a planar ligand orientation on the perovskite. We fabricated pin PSCs and report a certified quasi–steady state PCE of 26.15 and 24.74% for 0.05– and 1.04–square centimeter illuminated areas, respectively. The devices retain 95% of their initial PCE after 1200 hours of continuous 1 sun maximum power point operation at 65°C.

Science & Technology - Other Topics↗
DOE OSTI2021

Signatures of Coherent Phonon Transport in Ultralow Thermal Conductivity Two-Dimensional Ruddlesden–Popper Phase Perovskites

An emerging class of methylammonium lead iodide (MAPbI 3 )-based Ruddlesden-Popper (RP) phase perovskites, BA 2 MA n-1 Pb n I 3n+1 (n = 1-7), exhibit enhanced stability to environmental conditions relative to MAPbI 3 , yet still degrade at elevated temperatures. Here, we experimentally determine the thermal conductivities of these layered RP phases for n = 1-6, where n defines the number of repeated perovskite octahedra per layer. We measure thermal conductivities of 0.37 ± 0.13/0.12, 0.17 ± 0.08/0.07, 0.21 ± 0.05/0.04, and 0.19 ± 0.04/0.03 W/m∙K in thin films of n = 1-4 and 0.08 ± 0.06/0.04, 0.06 ± 0.04/0.03, 0.06 ± 0.03/0.03, and 0.08 ± 0.07/0.04 W/m∙K in single crystals of n = 3-6. With the exception of n = 1, these thermal conductivities are lower than the range of 0.34-0.50 W/m∙K reported for single-crystal MAPbI 3 . Reduced-order lattice dynamics modeling suggests that the initially decreasing trend of thermal conductivity in similarly oriented perovskites with increasing n may result from the transport properties of coherent phonons, emergent from the superstructure, that do not scatter at the interfaces of organic butylammonium chains and perovskite octahedra. Reduced group velocity of coherent phonons in n = 3-6, a consequence of band flattening in the phonon dispersion, is primarily responsible for their ultralow thermal conductivities. Similar effects on thermal conductivity have been experimentally demonstrated in deposited superlattices, but never in naturally defined materials such as RP phases. GIWAXS measurements reveal that higher n RP phase thin films are less orientationally controlled and therefore possess apparently elevated thermal conductivities relative to single crystals of the same n.

2D perovskites↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Alkali metal halide–coated perovskite redox catalysts for anaerobic oxidative dehydrogenation of n -butane

Oxidative dehydrogenation (ODH) of n-butane has the potential to efficiently produce butadiene without equilibrium limitation or coke formation. Despite extensive research efforts, single-pass butadiene yields are limited to <23% in conventional catalytic ODH with gaseous O 2 . This article reports molten LiBr as an effective promoter to modify a redox-active perovskite oxide, i.e., La 0.8 Sr 0.2 FeO 3 (LSF), for chemical looping–oxidative dehydrogenation of n-butane (CL-ODHB). Under the working state, the redox catalyst is composed of a molten LiBr layer covering the solid LSF substrate. Characterizations and ab initio molecular dynamics (AIMD) simulations indicate that peroxide species formed on LSF react with molten LiBr to form active atomic Br, which act as reaction intermediates for C–H bond activation. Meanwhile, molten LiBr layer inhibits unselective CO 2 formation, leading to 42.5% butadiene yield. The redox catalyst design strategy can be extended to CL-ODH of other light alkanes such as iso-butane conversion to iso-butylene, providing a generalized approach for olefin production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Perovskite Oxide–Halide Solid Solutions: A Platform for Electrocatalysts

The successful integration or hybridization of perovskite oxides with their halide cousins would enable the formation of both multi-anionic and multi-cationic solid solutions with unique metal-ion sites and synergistic properties that could potentially surpass the performance of classic perovskites. However, such solid solutions had not been produced previously owing to their distinct formation energies and different synthesis conditions. Solid solutions combining perovskite oxides with fluorides were produced in this study by mechanochemical synthesis. The obtained perovskite oxide–halide solid solutions had highly mixed elements and valences, uniform element distributions, and single-phase crystalline structures. In this work, the solid solution with an optimized combination of oxides and fluorides exhibited enhanced catalytic performance in the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Why Perovskite Thermal Stress is Unaffected by Thin Contact Layers

Metal halide perovskite photovoltaics have emerged as a high efficiency, low-cost alternative that can potentially rival or enhance conventional silicon technology. Despite exceptional initial power conversion efficiencies, achieving compliance with international standards and widespread adoption requires further enhancements to their operational stability. Notably, addressing mechanical strain and stress in brittle perovskites has emerged as a pivotal approach to mitigate chemical degradation and improve reliability during thermal cycling. Here, in this study, a popularized strain engineering strategy is investigated in which a high coefficient of thermal expansion (CTE) hole transport layer (i.e., PDCBT) is cast onto inorganic perovskite (CsPbI 2 Br) at 100 °C. Contrary to previously published results, the X-ray diffraction (XRD):Sin 2 ψ and substrate curvature measurement techniques show that the hole transport layer has no discernible impact on perovskite strain. The accuracy of the XRD:Sin 2 ψ method for measuring strain is highlighted in contrast to an analysis based on shifts of single XRD peaks which can be influenced by multiple artifacts. The findings in this study are in accordance with mechanics theory: thin layers are unable to induce significant strain changes in perovskite thin films as the force they apply is negligible compared to that applied by a thick and stiff substrate.

14 SOLAR ENERGY↗
DOE OSTI2024

Spin-Orbit-Lattice Entangled State in A 2 ⁢MgReO 6 (A = Ca, Sr, Ba) Revealed by Resonant Inelastic X-Ray Scattering

The 5d 1 ordered double perovskites present an exotic playground for studying novel multipolar physics due to large spin-orbit coupling. Here, we present Re L 3 edge resonant inelastic Xray scattering (RIXS) results that reveal the presence of the dynamic Jahn-Teller effect in the A 2 MgReO 6 (A = Ca, Sr, Ba) family of 5d 1 double perovskites. The spin-orbit excitations in these materials show a strongly asymmetric lineshape and exhibit substantial temperature dependence, indicating that they are dressed with lattice vibrations. Our experimental results are explained quantitatively through a RIXS calculation based on a spin-orbit-lattice entangled electronic ground state with the dynamic Jahn-Teller effect taken into consideration. We find that the spin-orbitlattice entangled state is robust against magnetic and structural phase transitions as well as against significant static Jahn-Teller distortions. Our results illustrate the importance of including vibroniccoupling for a complete description of the ground state physics of 5d 1 double perovskites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Energy Funneling in a Noninteger Two-Dimensional Perovskite

Energy funneling is a phenomenon that has been exploited in optoelectronic devices based on low-dimensional materials to improve their performance. Here, we introduce a new class of two-dimensional semiconductor, characterized by multiple regions of varying thickness in a single confined nanostructure with homogeneous composition. This "noninteger 2D semiconductor" was prepared via the structural transformation of two-octahedron-layer-thick (n = 2) 2D cesium lead bromide perovskite nanosheets; it consisted of a central n = 2 region surrounded by edge-lying n = 3 regions, as imaged by electron microscopy. Thicker noninteger 2D CsPbBr 3 nanostructures were obtained as well. Finally, these noninteger 2D perovskites formed a laterally coupled quantum well band alignment with virtually no strain at the interface and no dielectric barrier, across which unprecedented intramaterial funneling of the photoexcitation energy was observed from the thin to the thick regions using time-resolved absorption and photoluminescence spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Coherent band-edge oscillations and dynamic longitudinal-optical phonon mode splitting as evidence for polarons in perovskites

The coherence of collective modes, such as phonons and polarons, and their modulation of electronic states is long sought in complex systems, which is a crosscutting issue in photovoltaics and quantum electronics. In photovoltaic cells and lasers based on metal halide perovskites, the presence of polarons, i.e., photocarriers dressed by the macroscopic motion of charged lattice, assisted by terahertz (THz) longitudinal-optical (LO) phonons, has been intensely studied yet is still debated. This may be key for explaining the remarkable properties of the perovskite materials, e.g., defect tolerance, long charge lifetimes, and diffusion lengths. In this work we use the intense single-cycle THz pulse with peak electric field up to E THz = 1000 kV/cm to drive coherent polaronic band-edge oscillations at room temperature in CH 3 NH 3 PbI 3 (MAPbI 3 ). We reveal the oscillatory behavior is dominated by a specific quantized lattice vibration mode at $ω$ LO ~ 4 THz, which is both dipole and momentum forbidden. THz-driven coherent polaron dynamics exhibits distinguishing features: room temperature coherent oscillations at ω LO longer than 1 ps in both single crystals and thin films, mode-selective modulation of different band-edge states assisted by electron-phonon interaction, and dynamic mode splitting at low temperature due to entropy and anharmonicity of organic cations. Our results demonstrate intense THz-driven coherent band-edge modulation is a powerful probe of electron-lattice coupling phenomena and polaronic quantum control in perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

One-Step Solution Patterning for Two-Dimensional Perovskite Nanoplate Arrays

Two-dimensional perovskite crystals have attracted significant attention for their diverse optoelectronic characteristics, owing to their superior semiconducting properties. However, the majority of studies to date have focused on single crystals, which pose challenges for integration into device arrays due to their incompatibility with selective growth or conventional lithography techniques. Here, a facile one-step solution process for synthesizing 2D perovskite crystal arrays is proposed through meniscus-guided coating on patterned substrates. Here we further utilized this method for the synthesis of lateral heterostructure nanoplate arrays. Six different 2D perovskite nanoplate arrays, including epitaxial heterostructures, are successfully realized. Optical and crystallographic characterizations show the high optical performance and crystallinity of the nanoplates. Moreover, this method is further employed to prepare high-performance 2D perovskite nanoplate photosensor arrays. This strategy can be utilized as a guideline for the fundamental investigation of optical properties and the development of high-performance optoelectronics of perovskite materials including photosensors and displays.

2D perovskite nanoplates↗
DOE OSTI2023

Energetics of formation and stability in high pressure steam of barium lanthanide cobaltite double perovskites

Here, this study concerns energetics of formation and the stability in high water partial pressure of BaLnCo 2 O 6-δ , (Ln = La, Pr, Nd, and Gd) (BLnC) and BaGd 1-x La x Co 2 O 6-δ , where x = 0.2, 0.5, and 0.7 (BGLC) double perovskite cobaltites. Those materials are extensively studied due to their potential applications as a positrode in electrochemical devices. Therefore, their stability under such conditions is a key issue. All investigated materials are thermodynamically stable relative to binary oxides and exhibit strongly exothermic enthalpies of formation. Moreover, BaGd 0.3 La 0.7 Co 2 O 6-δ and BaGd 0.8 La 0.2 Co 2 O 6-δ remain the main perovskite structure up to 3 bars of water vapor at 400 °C. At higher steam pressure, reaching 10 bar at 300 °C, the partial decomposition to constituent oxides and hydroxides was observed. The BGLC compounds exhibit higher negative formation enthalpies in comparison to single-Ln compositions, which does not translate into higher chemical stability under high steam pressures since the BLnC series retained the main perovskite structure at higher temperatures as well as in higher water vapor pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗