Search NASA⌕ Search

SEARCH · Search NASA

Results for “solid-state”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The evolution of icy satellite interiors and surfaces

The results obtained by Consolmagno (1975) with regard to the interiors of the smaller icy satellites are presented and the evolution of the surfaces of these objects in the light of the considered models is discussed. In the discussion the icy satellites are divided into two groups. Those with radii larger than 1000 km are composed primarily of high-pressure phases of ice. In the case of satellites of this group, internal heating may produce significant melting and solid-state convection may not be important. Those satellites with radii less than 1000 km will be composed primarily of ice I and rock. They will not significantly melt and internal convection is likely to be important.

Consolmagno, G. J.↗
NASA NTRS1978

Thermal evolutions of the terrestrial planets

Theoretical models are formulated for the thermal evolution of the moon, Mercury, Mars, Venus, and hypothetical minor planets, with consideration of conduction, solid-state convection, and differentiation. A variety of geological, geochemical and geophysical data is used to constrain both the present-day temperatures and the thermal histories of the planetary interiors. The data imply that the planets were heated during or shortly after formation and that all the terrestrial planets started differentiating early in their history. The size of the planet is the primary factor in determining its present-day thermal state. A planetary body with radius less than 1000 km is unlikely to reach melting, given heat source concentrations similar to terrestrial values and in the absence of intensive early heating.

Toksoz, M. N.↗
NASA NTRS1978

A multiple pulse zero crossing NMR technique, and its application to F-19 chemical shift measurements in solids

A simple multiple-pulse 'zero crossing technique' for accurately determining the first moment of a solid-state NMR spectrum is introduced. This technique was applied to obtain the F-19 chemical shift versus pressure curves up to 5 kbar for single crystals of CaF2 (0.29 + or - 0.02 ppm/kbar) and BaF2 (0.62 + or - 0.05 ppm/kbar). Results at ambient temperature and pressure are also reported for a number of other fluorine compounds. Because of its high data rate, this technique is potentially several orders of magnitude more sensitive than similar CW methods.

Burum, D. P.↗
NASA NTRS1978

Studies of Brazilian meteorites. XIII - Mineralogy, petrology, and chemistry of the Putinga, Rio Grande do Sul, chondrite

The Putinga, Rio Grande do Sul chondrite is described and classified as an L6. The mineral composition and some significant ratios of elements are reported, and the reasons for assignment to the L group and to petrologic type 6 are explained. The analysis suggests that maskelynite of oligoclase composition was formed by solid-state shock transformation of previously existing well-crystallized plagioclase at estimated shock pressures of about 250-350 kbar. This finding indicates that recrystallization (formation of well-crystallized oligoclase) preceded shock transformation formation of the maskelynite.

Keil, K.↗
NASA NTRS1978

The medium energy cosmic ray experiment for ISEE-C

A description is provided of the medium energy cosmic ray experiment on board the ISEE-C spacecraft. This experiment is designed to measure the charge composition of nuclear energetic particles over wide ranges in energy (1-500 MeV/nucleon) and in charge (Z equals 1-28). Individual isotopes are resolvable for Z equals 1-7 over a restricted energy range. Electrons of 2-10 MeV are measured as well. These measurements are accomplished using all solid-state detector telescopes with detectors ranging in thickness from 15-3000 microns. The scientific goals of the experiment are also described. These include study of the composition of energetic particles from the sun and from the galaxy, the acceleration and flow of particles in the interplanetary medium, and electrons from Jupiter. Heliospheric gradients and other characteristics of solar modulation will be measured in conjunction with identical telescopes flown on the Voyager 1 and 2 spacecraft and similar telescopes on Pioneer 10 and 11.

Von Rosenvinge, T. T.↗
NASA NTRS1978

The ISEE 1 and 2 Medium Energy Particles Experiment

The Medium Energy Particles Experiment (MEPE) on board ISEE 1 and 2 consists of the WIM instrument on ISEE 1 and the KED instrument on ISEE 2. Both instruments employ solid-state detectors and magnetic analysis to measure the angular, energy, and intensity distributions of protons (ions) above 24 keV and electrons above 20 keV. The WIM instrument also includes a composition measurement employing Delta E-by-E and time-of-flight techniques. Three-parameter analysis is performed above 250 keV/nucleon, and single parameter analysis is performed above 125 keV/nucleon for helium through oxygen. Three-dimensional angular distributions are obtained through the use of a scan platform in the WIM instrument and multiple detector heads in the KED instrument. A variety of operational modes are used to optimize data collection from both instruments. Resolutions up to 128 channels in energy, 192 samples over the unit sphere in angle, and 0.095 sec in time are available.

Williams, D. J.↗
NASA NTRS1978

Design concept of geostationary platform

The payload efficiency of communication satellites has typically averaged 25 to 30% while meteorology and earth observation satellites range from 30 to 35%. Improvement in solar cell efficiency, batteries, electric propulsion for stationkeeping, and solid-state circuitry will increase this efficiency in the future, but it will still be advantageous in the Shuttle era to reduce the expenditure for support systems. A platform that provides all the support functions could reduce the initial cost due to economics of scale and also reduce transportation cost. Three alternate configurations of a platform for geosynchronous orbit communications and meteorology missions are presented

Hamilton, E. C.↗
NASA NTRS1978

Quiet time observations of equatorially trapped megaelectronvolt radiation belt ions with nuclear charge Z greater than or equal to 4

Data from the equatorial satellite Explorer 45 were used to study ion fluxes during the geomagnetically quiescent period June 1-15, 1972. A heavy-ion solid-state ion detector system obtained count rates close to the equatorial plane in the energy passband 1.82-4.8 MeV per ion during a single satellite pass through the radiation belts. Fluxes of these ions are interpreted as oxygen ions and are found to maximize in the L shell range 3-3.5 with peak equatorially mirroring flux of 0.38 ions/(sq cm s sr keV). This peak is not as sharply confined in L shell as is the helium ion peak.

Spjeldvik, W. N.↗
NASA NTRS1977

Extraction processes for the production of aluminum, titanium, iron, magnesium, and oxygen and nonterrestrial sources

The suitability of existing terrestrial extractive metallurgical processes for the production of Al, Ti, Fe, Mg, and O2 from nonterrestrial resources is examined from both thermodynamic and kinetic points of view. Carbochlorination of lunar anorthite concentrate in conjunction with Alcoa electrolysis process for Al; carbochlorination of lunar ilmenite concentrate followed by Ca reduction of TiO2; and subsequent reduction of Fe2O3 by H2 for Ti and Fe, respectively, are suggested. Silicothermic reduction of olivine concentrate was found to be attractive for the extraction of Mg becaue of the technological knowhow of the process. Aluminothermic reduction of olivine is the other possible alternative for the production of magnesium. The large quantities of carbon monoxide generated in the metal extraction processes can be used to recover carbon and oxygen by a combination of the following methods: (1) simple disproportionation of CO,(2) methanation of CO and electrolysis of H2O, and (3) solid-state electrolysis of gas mixtures containing CO, CO2, and H2O. The research needed for the adoption of earth-based extraction processes for lunar and asteroidal minerals is outlined.

D Bhogeswara Rao↗
NASA NTRS1977

Coherent optical processing of synthetic aperture radar data

Consideration is given to the data processing algorithm used in synthetic aperture radar (SAR) systems. Examples are presented of radar imagery obtained with the ERIM X-band SAR system and processed with a precision optical processor. An optical recording of the data is the input to the coherent optical processing channel. The encoding technique, spatial format, and quality of the stored data are discussed. Several optical processor configurations are outlined, noting particularly the tilted-plane system. A scanning photodetector serves to convert the optical processor output image data into an electronic signal stream. Solid-state two-dimensional photodetector arrays may provide this function at increased speeds and with greater accuracy.

Cindrich, I.↗
NASA NTRS1978

Spectra and composition 2-40 MeV/nucleon of ions Z = 2-28 in solar cosmic ray events

Solid-state detectors on IMP 7 and IMP 8 provide measurements in interplanetary space of ion energy spectra and relative composition from He through Ni in the energy range 2-40 MeV/nucleon. The large solar events of July 3-9, September 11-16, and September 20-26, 1974, are analyzed in detail. Spectra are fit by either power laws in energy or by momentum-dependent exponentials. Spectral slope is independent of ion charge for elements beyond C. Substantial time variations in the He/O and (Fe + Ni)/O ratios are noted. New limits are derived for the abundances of Li, Be, B, F, Na, Al, P, S, Ar, and Ca. Analysis of additional events from 1973 through 1976 suggests a systematic enhancement of the He/O and C/O ratios in low-energy corotating flux increases compared with flare-associated particle fluxes.

Mcguire, R. E.↗
NASA NTRS1978

Elastic constants at low temperatures - Recent measurements on technological materials at NBS

Solid-state low-temperature elastic properties have been experimentally studied at the NBS Cryogenic Division for four years. Most studies were between room temperature and liquid-helium temperature; some were only to liquid-nitrogen temperature. Two dynamic (high-frequency) experimental methods were used, pulse-echo and resonance, resulting in adiabatic elastic constants. The present paper reviews these studies for 47 technological materials - metals, alloys, and composites. The elastic constants primarily discussed are Young's modulus, the shear modulus, the bulk modulus (reciprocal compressibility), and Poisson's ratio. A summary table is presented to show which base metals tend to exhibit regular, irregular, or anomalous behavior in their elastic constant/temperature curves.

Ledbetter, H. M.↗
NASA NTRS1978

Investigation of direct solar-to-microwave energy conversion techniques

Identification of alternative methods of producing microwave energy from solar radiation for purposes of directing power to the Earth from space is investigated. Specifically, methods of conversion of optical radiation into microwave radiation by the most direct means are investigated. Approaches based on demonstrated device functioning and basic phenomenologies are developed. There is no system concept developed, that is competitive with current baseline concepts. The most direct methods of conversion appear to require an initial step of production of coherent laser radiation. Other methods generally require production of electron streams for use in solid-state or cavity-oscillator systems. Further development is suggested to be worthwhile for suggested devices and on concepts utilizing a free-electron stream for the intraspace station power transport mechanism.

Chatterton, N. E.↗
NASA NTRS1977

Emergency Lighting

A lighting system originally developed for NASA's Apollo and Skylab manned spacecraft resulted in a industrial spinoff and creation of a whole new company to produce and market the product line. The company is UDEC Corp., Waltham, Mass. UDEC's "Multi-Mode" electronic lighting systems are designed for plant emergency and supplemental use, such as night lighting, "always-on" stairwell lights and illuminated exit signs. Their advantages stem from the qualities demanded for spacecraft installation: extremely high fight output with very low energy drain, compactness, light weight, and high reliability. The Multi-Mode system includes long-life fluorescent lamps operated by electronic circuitry, a sealed battery that needs no maintenance for 10 years, and a solid-state battery charger. A typical emergency installation consists of a master module with battery and an eight watt lamp, together with four remote "Satellight" modules powered by the master's battery. As a night lighting system for maintenance or I security, UDEC fixtures can bypass the battery and 1 operate on normal current at a fraction of the energy 1 demand of conventional night lighting. Industrial customers have realized savings of better than ninety percent with UDEC night lights. UDEC started as a basement industry in 1972 but the company has already sold more than 1,000 lighting systems to building operators.

Source record↗
NASA NTRS1977

Breadboard Facility

In the sixties, Chrysler was NASA's prime contractor for the Saturn I and IB test launch vehicles. The company installed and operated at Huntsville what was known as the Saturn I/IB Development Breadboard Facility. "Breadboard," means an array of electrical and electronic equipment for performing a variety of development and test functions. This work gave Chrysler a broad capability in computerized testing to assure quality control in development of solid-state electronic systems. Today that division is manufacturing many products not destined for NASA, most of them being associated with the company's automotive line. A major project is production and quality-control testing of the "lean-burn" engine, one that has a built-in Computer to control emission timing, and allow the engine to run on a leaner mixture of fuel and air. Other environment-related products include vehicle emission analyzers. The newest of the line is an accurate, portable solid state instrument for testing auto exhaust gases. The exhaust analyzers, now being produced for company dealers and for service

Source record↗
NASA NTRS1977

Multiple high voltage output DC-to-DC power converter

Disclosed is a multiple output DC-to-DC converter. The DC input power is filtered and passed through a chopper preregulator. The chopper output is then passed through a current source inverter controlled by a squarewave generator. The resultant AC is passed through the primary winding of a transformer, with high voltages induced in a plurality of secondary windings. The high voltage secondary outputs are each solid-state rectified for passage to individual output loads. Multiple feedback loops control the operation of the chopper preregulator, one being responsive to the current through the primary winding and another responsive to the DC voltage level at a selected output.

Cronin, Donald L.↗
NASA NTRS1961

Neutralization of Hydroxide Ion in Melt-Grown NaCl Crystals

Many recent studies of solid-state phenomena, particularly in the area of crystal imperfections, have involved the use of melt-grown NaCl single crystals. Quite often trace impurities in these materials have had a prominent effect on these phenomena. Trace amounts of hydroxide ion have been found in melt-grown NaCl crystals. This paper describes a nondestructive method of neutralizing the hydroxide ion in such crystals. Crystals of similar hydroxide content are maintained at an elevated temperature below the melting point of NaCl in a flowing atmosphere containing. dry hydrogen chloride. Heat treatment is continued until an analysis of the test specimens shows no excess hydroxide ion. A colorimetric method previously described4 is used for this analysis.

Otterson, Dumas A.↗
NASA NTRS2026

Thermochemical Stability of Ca2Yb8(SiO4)6O2 Apatite in Presence of Molten Calcium-Magnesium-Aluminosilicate (CMAS)

Thermochemical stability of ytterbium silicon oxyapatite Ca 2 Yb 8 (SiO 4 ) 6 O 2 (CYbS) in the presence of molten calcium-magnesium aluminosilicate (CMAS) has been investigated at elevated temperatures for consideration as a thermal and environmental barrier coating (T/EBC) material. CYbS apatite powder was synthesized from the constituent oxides via a solid-state reaction method. Hot-pressed apatite substrates were exposed to molten CMAS at 1200, 1300, and 1400 °C for 1, 10, and 50 h. Development of phases in the interaction region of the heat-treated specimens was monitored using scanning electron microscopy, transmission electron microscopy, high-angle annular dark-field imaging, selected area electron diffraction, and energy dispersive x-ray spectroscopy. Monoclinic cyclosilicate Ca 3 Yb 2 (Si 3 O 9 ) 2 formed from interaction of CYbS apatite with CaO in the CMAS melt at the apatite-CMAS reaction front and continued to nucleate and grow within the residual CMAS in diffusion couples annealed for 1 to 50 h at 1200 °C as well as in those heat treated at 1300 °C for 1 h. Residual CMAS was depleted of Ca when cyclosilicate was present. Dendritic wollastonite (CaSiO3) was observed within the residual CMAS in couples annealed at 1200 and 1300 °C. Ingress of molten CMAS, because of its exponential decrease in viscosity, occurred through open pores and along the grain boundaries of the apatite substrates without any detectable chemical reaction at 1300 and 1400 °C. Results of this study indicate that Ca 2 Yb 8 (SiO 4 ) 6 O 2 apatite has the potential to mitigate the CMAS corrosion up to about 1200 °C but not at higher temperatures.

Narottam P Bansal↗