Search NASA⌕ Search

SEARCH · Search NASA

Results for “solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Development of Thin, Robust, Lithium-Impenetrable, HighConductivity, Electrochemically Stable, Scalable, and Low-Cost Glassy Solid Electrolytes for Solid State Lithium Batteries (Final Report)

Solid-state electrolytes (SSEs) must have thicknesses of < 50 microns in order to be competitive with current state-of-the-art organic liquid electrolyte batteries. Mixed oxy-sulfide-nitride (MOSN) glassy solid electrolytes (GSEs) can be drawn into thin ribbons using the glass redraw process, to form glasses with superior performance in a safe, lower-cost, monolithic glass film. It is expected that these new GSEs in solid-state lithium batteries (SSLBs) increase the energy density (anode basis) from ~300 mAh/g to ~ 4000 mAh/g. This project is focused on the development of candidate MOS GSE compositions, and optimization of the thin film drawing process to generate thin film glass ribbons for use in SSLBs.

25 ENERGY STORAGE↗

F and N Rich Solid Electrolyte for Stable All-Solid-State Battery

We report the instability of sulfide solid electrolytes to Li anode and high-voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes limits the cyclic performance of all-solid-state lithium battery (ASSLB). Herein, the stability of Li 6 PS 5 Cl against Li anode is enhanced by mixing a small amount (0.32 wt%) of CuF 2 -LiNO 3 (CL) into Li 6 PS 5 Cl electrolyte layer to in-situ form a mixed-conductive-lithiophobic and self-healing LiF-Li 3 N-Cu solid electrolyte interphase (SEI) at Li 6 PS 5 Cl-CL/Li interface. The critical current density (CCD) of Li 6 PS 5 Cl-CuF 2 -LiNO 3 increases to 1.4 mA cm –2 /1.4 mAh cm –2 at room temperature, which is much higher than that of pristine Li 6 PS 5 Cl (0.4 mA cm –2 /0.4 mAh cm –2 ) even though mixing 0.32 wt% CL into Li 6 PS 5 Cl slightly reduces the ionic conductivity from 2.9 × 10 –3 to 1.5 × 10 –3 S cm –1 . The compatibility of Li 6 PS 5 Cl-CL electrolyte to single-crystalline NMC811 (S-NMC811) is further enhanced by adding a small amount (0.02 wt%) of AlF 3 into Li 6 PS 5 Cl-CL forming Li 6 PS 5 Cl-CuF 2- LiNO 3 -AlF 3 (Li 6 >PS 5 Cl-CLA) as a cathode electrolyte and by doing Cl – on S-NMC811 (Cl@S-NMC811) surface. The Cl@S-NMC811-Li 6 PS 5 Cl-CLA|Li 6 PS 5 Cl-CL|Li cells with areal capacity of 2.55 mAh cm -2 achieve a capacity retention of 69.4% after 100 cycles at 1C (1C = 200 mAh g -1 ). Adding a small amount of SEI and cathode/electrolyte interphase (CEI) former into the sulfide electrolytes with minimal reduction (48.3%) of ionic conductivity is an effective method to enhance the performance of ASSLB.

36 MATERIALS SCIENCE↗

Solid-State Lithium/Selenium–Sulfur Chemistry Enabled via a Robust Solid-Electrolyte Interphase

Lithium/selenium-sulfur batteries have recently received considerable attention due to their relatively high specific capacities and high electronic conductivity. Different from the traditional encapsulation strategy for suppressing the shuttle effect, an alternative approach to directly bypass polysulfide/polyselenide formation via rational solid-electrolyte interphase (SEI) design is demonstrated here. It is found that the robust SEI layer that in situ forms during charge/discharge via interplay between rational cathode design and optimal electrolytes could enable solid-state (de)lithiation chemistry for selenium-sulfur cathodes. Hence, Se-doped S 22.2 Se/Ketjenblack cathodes can attain a high reversible capacity with minimal shuttle effects during long-term and high rate cycling. Moreover, the underlying solid-state (de)lithiation mechanism, as evidenced by in situ 7 Li NMR and in operando synchrotron X-ray probes, further extends the optimal sulfur confinement pore size to large mesopores and even macropores that have been long considered as inferior sulfur or selenium host materials, which play a crucial role in developing high volumetric energy density batteries. It is expected that the findings in this study will ignite more efforts to tailor the compositional/structure characteristics of the SEI layers and the related ionic transport across the interface by electrode structure, electrolyte solvent, and electrolyte additive screening.

(de)lithiation chemistry↗

A conservative discontinuous-Galerkin-in-time (DGiT) multirate time integration framework for interface-coupled problems with applications to solid–solid interaction and air–sea models

In this paper we extend the DGiT multirate framework, developed in Connors and Sockwell (2022) for scalar transmission problems, to a solid–solid interaction (SSI) problem involving two coupled elastic solids and a coupled air–sea model with the rotating, thermal shallow water equations. In so doing we aim to demonstrate the broad applicability of the mathematical theory and governing principles established in Connors and Sockwell (2022) to coupled problems characterized by subproblems evolving at different temporal scales. Further, multirate time integration algorithms employing different time steps, optimized for the dynamics of each subproblem, can significantly improve simulation efficiency for such coupled problems. However, development of multirate algorithms is a highly non-trivial task due to the coupling, which can impact accuracy, stability or other desired properties such as preservation of system invariants. DGiT provides a general template for multirate time integration that can achieve these properties. To elucidate the manner in which DGiT accomplishes this task, we fully detail each step in the application of the framework to the SSI and air–sea coupled problems. Numerical examples illustrate key properties of the resulting multirate schemes for both problems.

42 ENGINEERING↗

Proton-detected 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment for the measurement of NH distances in biological solids under fast MAS solid-state NMR

Measurement of distances from dipolar couplings is essential for structural characterization, refinement and validation using the solid-state nuclear magnetic resonance (ssNMR) spectroscopy. Particularly, knowledge about NH dipolar interactions in biological solids is important for understanding the hydrogen (H)-bonding interactions, molecular geometry and spin dynamics. In this regard, we have proposed a proton-detected two-dimensional (2D) 15 N- 1 H dipolar coupling/ 1 H chemical shift correlation experiment using the C-symmetry based windowless recoupling of chemical shift anisotropy (ROCSA) in combination with the DIPSHIFT pulse-based method for the measurement of short NH distances in the isotopically labeled and naturally abundant biological solids at fast magic angle spinning (MAS) rates (40–70 kHz). Our proposed method results in undistorted recoupled 15 N- 1 H dipolar coupling powder lineshapes that are free from the recoupled 1 H CSA contributions under the 15 N evolution, a feature that is essential for the measurement of NH distances with improved accuracy (± 500 Hz in terms of the NH dipolar couplings). The pulse sequence developed in the present study is also insensitive to the 1H–1H homonuclear dipolar interactions, relaxation effects owing to its constant-time implementation, and t1-noise from the fluctuations in the MAS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fundamental research on gas–solid reaction between CO{sub 2} and Li{sub 2}CuO{sub 2} linking application for solid CO{sub 2} absorbent

We compared reactivity between CO{sub 2} and Li{sub 2}CuO{sub 2} with that between CO{sub 2} and Li{sub 4}SiO{sub 4} by using XRD, SEM observation, and thermogravimetry in order to study fundamentally a potential of Li{sub 2}CuO{sub 2} oxide for application to solid CO{sub 2} absorbents. The CO{sub 2} absorption ability of Li{sub 2}CuO{sub 2} was examined by measuring rate constants for the gas–solid reaction between perfectly single-phase Li{sub 2}CuO{sub 2} and CO{sub 2} at various temperatures in 100 vol% CO{sub 2} atmosphere using the rate theory with thermogravimetry using rapid heating. The measured rate constants were compared with those reported previously for Li{sub 4}SiO{sub 4} at various temperatures. Almost no difference was found between these rate constants of Li{sub 2}CuO{sub 2} and Li{sub 4}SiO{sub 4} at temperatures less than 660 °C, but at temperatures higher than 670 °C, the rate constants of Li{sub 2}CuO{sub 2} were greater than those of Li{sub 4}SiO{sub 4}. These results demonstrate that Li{sub 2}CuO{sub 2} can outstrip the ability of Li{sub 4}SiO{sub 4} to absorb CO{sub 2}. Moreover, different from Li{sub 4}SiO{sub 4}, the CO{sub 2} absorption ability of Li{sub 2}CuO{sub 2} decays only slightly, even if the atmospheric CO{sub 2} concentration decreases. -- Graphical abstract: Surface changes of Li{sub 2}CuO{sub 2} and Li{sub 4}SiO{sub 4} particles by progression of the gas–solid reactions between CO{sub 2} and these oxides. Highlights: • The CO{sub 2} absorption ability of perfect single-phase Li{sub 2}CuO{sub 2} is reported. • Results show that Li{sub 2}CuO{sub 2} can outstrip the Li{sub 4}SiO{sub 4} ability to absorb CO{sub 2}. • The oxide particle CO{sub 2} absorption ability is size- and surface-state-dependent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic solid state energy scale: Universality and periodic trends in oxidation state

The atomic solid state energy (SSE) scale originates from a plot of the electron affinity (EA) and ionization potential (IP) versus band gap (E{sub G}). SSE is estimated for a given atom by assessing an average EA (for a cation) or an average IP (for an anion) for binary inorganic compounds having that specific atom as a constituent. Physically, SSE is an experimentally-derived average frontier orbital energy referenced to the vacuum level. In its original formulation, 69 binary closed-shell inorganic semiconductors and insulators were employed as a database, providing SSE estimates for 40 elements. In this contribution, EA and IP versus E{sub G} are plotted for an additional 92 compounds, thus yielding SSE estimates for a total of 64 elements from the s-, p-, d-, and f-blocks of the periodic table. Additionally, SSE is refined to account for its dependence on oxidation state. Although most cations within the SSE database are found to occur in a single oxidation state, data are available for nine d-block transition metals and one p-block main group metal in more than one oxidation state. SSE is deeper in energy for a higher cation oxidation state. Two p-block main group non-metals within the SSE database are found to exist in both positive and negative oxidation states so that they can function as a cation or anion. SSEs for most cations are positioned above −4.5 eV with respect to the vacuum level, and SSEs for all anions are positioned below. Hence, the energy −4.5 eV, equal to the hydrogen donor/acceptor ionization energy ε(+/−) or equivalently the standard hydrogen electrode energy, is considered to be an absolute energy reference for chemical bonding in the solid state. - Highlights: • Atomic solid-state energies are estimated for 64 elements from experimental data. • The relationship between atomic SSEs and oxidation state is assessed. • Cations are positioned above and absolute energy of −4.5 eV and anions below.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A review of recent research on nonequilibrium solid solution behavior in Li X FePO 4 [A review of nonequilibrium solid solution in Li X FePO 4 ]

Li X FePO 4 (0 < X < 1) is one of the most well-studied cathode battery materials and is notable for its large miscibility gap. Although its phase-separating behaviors under equilibrium conditions have been well documented, recent research has shown that phase separation is suppressed at elevated rates of lithium insertion and removal. Specifically, Li X FePO 4 exhibits a nonequilibrium solid solution behavior at elevated cycling rates. This article reviews recent research on nonequilibrium solid solution in Li X FePO 4 ; these insights have been largely enabled by operando characterization techniques. As a result, such studies have not only unambiguously confirmed the existence of this solid solution, but also show how surface reaction and diffusion kinetics ultimately affect phase separation and other spatially nonuniform lithiation and delithiation behavior.

36 MATERIALS SCIENCE↗

Measuring Long-Range 13 C– 13 C Correlations on a Surface under Natural Abundance Using Dynamic Nuclear Polarization-Enhanced Solid-State Nuclear Magnetic Resonance [Measuring Long Range 13 C– 13 C Correlations on Surface under Natural Abundance Using DNP-enhanced Solid-state NMR]

Here, we report that spatial (<1 nm) proximity between different molecules in solid bulk materials and, for the first time, different moieties on the surface of a catalyst, can be established without isotope enrichment by means of homonuclear CHHC solid-state nuclear magnetic resonance experiment. This 13 C– 13 C correlation measurement, which hitherto was not possible for natural-abundance solids, was enabled by the use of dynamic nuclear polarization. Importantly, it allows the study of long-range correlations in a variety of materials with high resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando X-Ray Tomography Imaging of Solid-State Electrolyte Response to Li Evolution under Realistic Operating Conditions

Solid-state Li-ion conductors are a next-generation battery technology that are particularly promising for electric vehicles, offering the capacitive benefits of Li metal anodes with nonflammable electrolytes. Microstructural evolution in these solid-state batteries, especially the Li anode, requires deeper understanding of the conditions under which certain undesired behaviors are more likely to occur. This study utilizes operando X-ray computed tomography to visualize the behavior of lithium in response to device operation, considering variables that are relevant to a realistic battery: stack pressure, microscale defects such as pores, and temperature. This work demonstrates that experimental and operational conditions, especially temperature, affect the fundamental driving forces of realistic solid electrolyte systems and provides visual insight into possible mechanisms of Li migration. In particular, the effect of these variables on Li propagation from the anode through pre-existing defects and Li nucleation within the imperfectly electron-insulating electrolyte is highlighted.

battery↗

Solvent-Cast Solid Electrolyte Membranes Based on a Charged Rigid-Rod Polymer and Ionic Liquids

Solid-state electrolytes are attractive for use in electrochemical devices because they remove the need for a flammable liquid electrolyte while contributing to the structural integrity of the device. We have recently developed a class of solid electrolytes, termed molecular ionic composites (MICs), composed of ionic liquids (ILs) and a rigid-rod polyelectrolyte, poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT). MIC materials, originally obtained through an ion-exchange process between IL and PBDT aqueous solution, possess an unprecedented combination of high ionic conductivity, high thermal stability, low flammability and widely tunable tensile storage moduli. Here we present a facile solvent casting method for preparing MIC membranes. These membranes are uniform, flexible, and tough, with tunable composition and thickness (≥ 40 μm). Unlike the previous ion-exchange method, which only allowed incorporation of hydrophilic ILs, we can now incorporate hydrophobic ILs to prepare MIC membranes for, e.g. battery electrolytes. A sodium (Na) metal symmetric cell constructed with a PBDT-Pyr 14 TFSI membrane as the solid electrolyte shows long-term stable cycling (> 500 h.) at 60 °C. Furthermore, the ability to prepare MICs using both hydrophilic and hydrophobic ILs initiates a wider range of MIC materials and broadens the array of applications accessible by MIC membranes.

25 ENERGY STORAGE↗

Tortuosity Effects in Garnet-Type Li 7 La 3 Zr 2 O 12 Solid Electrolytes

Intrinsic material microstructure features, such as pores or void spaces, grains, and defects can affect local lithium-ion concentration profiles and transport properties in solid ion conductors. The formation of lithium-deficient or -excess regions can accelerate degradation phenomena, such as dendrite formation, lithium plating, and electrode/electrolyte delamination. This paper evaluates the effects pores or void spaces have on the tortuosity of a garnet-type Li 7 La 3 Zr 2 O 12 solid electrolyte. Synchrotron X-ray tomography is used to obtain three-dimensional reconstructions of different electrolytes sintered at temperatures between 1050 and 1150 °C. The magnitude of the electrolyte tortuosity and the tortuosity directional anisotropy is shown to increase with sintering temperature. Electrolytes with highly anisometric tortuosity have lower critical current densities. Here, the alignment or elimination of pores within an electrolyte or composite cathode may provide a means or achieving higher critical current densities and higher power densities in all solid-state batteries.

42 ENGINEERING↗

Dynamical screening of van der Waals interactions in nanostructured solids: Sublimation of fullerenes

Sublimation energy is one of the most important properties of molecular crystals, but it is difficult to study, because the attractive long-range van der Waals (vdW) interaction plays an important role. Here, we apply efficient semilocal density functional theory (DFT), corrected with the dynamically screened vdW interaction (DFT + vdW), the Rutgers-Chalmers nonlocal vdW-DF, and the pairwise-based dispersion-corrected DFT-D2 developed by Grimme and co-workers, to study the sublimation of fullerenes. We find that the short-range part, which accounts for the interaction due to the orbital overlap between fullerenes, is negligibly small. Our calculation shows that there exists a strong screening effect on the vdW interaction arising from the valence electrons of fullerenes. On the other hand, higher-order contributions can be as important as the leading-order term. The reasons are that (i) the surface of fullerene molecules is metallic and thus highly polarizable, (ii) the band gap of fullerene solids is small (less than 2 eV), and (iii) fullerene molecules in the solid phase are so densely packed, yielding the high valence electron density and small equilibrium intermolecular distances (the first nearest neighbor distance is only about 10 Å for C{sub 60}). However, these two effects make opposite contributions, leading to significant error cancellation between these two contributions. We demonstrate that, by considering higher-order contributions and the dynamical screening, the DFT + vdW method can yield sublimation energies of fullerenes in good agreement with reference values, followed by vdW-DF and DFT-D2. The insights from this study are important for a better understanding of the long-range nature of vdW interactions in nanostructured solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A stochastic model of solid state thin film deposition: Application to chalcopyrite growth

Developing high fidelity quantitative models of solid state reaction systems can be challenging, especially in deposition systems where, in addition to the multiple competing processes occurring simultaneously, the solid interacts with its atmosphere. In this work, we develop a model for the growth of a thin solid film where species from the atmosphere adsorb, diffuse, and react with the film. The model is mesoscale and describes an entire film with thickness on the order of microns. Because it is stochastic, the model allows us to examine inhomogeneities and agglomerations that would be impossible to characterize with deterministic methods. We demonstrate the modeling approach with the example of chalcopyrite Cu(InGa)(SeS){sub 2} thin film growth via precursor reaction, which is a common industrial method for fabricating thin film photovoltaic modules. The model is used to understand how and why through-film variation in the composition of Cu(InGa)(SeS){sub 2} thin films arises and persists. We believe that the model will be valuable as an effective quantitative description of many other materials systems used in semiconductors, energy storage, and other fast-growing industries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy properties of solid fossil fuels and solid biofuels

The paper deals about the problematic of energy properties of solid biofuels in comparison with solid fossil fuels. Biofuels are alternative to fossil fuels and their properties are very similar. During the experiments were done in detail experiments to obtain various properties of spruce wood pellets and wheat straw pellets like biofuels in comparison with brown coal and black coal like fossil fuels. There were tested moisture content, volatile content, fixed carbon content, ash content, elementary analysis (C, H, N, S content) and ash fusion temperatures. The results show that biofuels have some advantages and also disadvantages in comparison with solid fossil fuels.

01 COAL, LIGNITE, AND PEAT↗

ULTRAVIOLET AND INFRARED SPECTRA OF ELECTRON-BOMBARDED SOLID NITROGEN AND METHANE DILUTED IN SOLID NITROGEN

The infrared (IR) and ultraviolet (UV) absorption spectra of pure solid N{sub 2} and CH{sub 4} diluted in solid N{sub 2} (1/100) irradiated with energetic electrons at 10 K were obtained. The IR absorption measurements of the electron-bombarded pure N{sub 2} solid reveal the formation of N{sub 3} and N{sub 3} {sup +}, which was confirmed by the observed electronic transitions A {sup 2}{Sigma}{sub u} {sup +}<- X {sup 2}{Pi}{sub g} of N{sub 3} and A {sup 3}{Pi}{sub u} <- X {sup 3}{Sigma}{sub g} {sup -} of N{sub 3} {sup +}. In the case of N{sub 2} ice containing a small proportion of CH{sub 4}, we have identified the products of irradiated CH{sub 4}/N{sub 2} ice, including N{sub 3}, C{sub n} N (n = 1-3), CN{sub 2}, (CN){sub 2}, CH{sub 3}N, HCN{sub 2}, HC{sub 2}N, C(NH){sub 2}, HNC, HCN, CH{sub 3}, C{sub 2}H, C{sub 2}H{sub 2}, CN{sup -}, NH{sub 3} {sup +}, and HC{sub 3}N{sup +}. UV absorption measurement of the ice sample was carried out and the possible carriers associated with the observed absorption bands were assigned and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗