Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Advanced aeroservoelastic stabilization techniques for hypersonic flight vehicles

Advanced high performance vehicles, including Single-Stage-To-Orbit (SSTO) hypersonic flight vehicles, that are statically unstable, require higher bandwidth flight control systems to compensate for the instability resulting in interactions between the flight control system, the engine/propulsion dynamics, and the low frequency structural modes. Military specifications, such as MIL-F-9490D and MIL-F-87242, tend to limit treatment of structural modes to conventional gain stabilization techniques. The conventional gain stabilization techniques, however, introduce low frequency effective time delays which can be troublesome from a flying qualities standpoint. These time delays can be alleviated by appropriate blending of gain and phase stabilization techniques (referred to as Hybrid Phase Stabilization or HPS) for the low frequency structural modes. The potential of using HPS for compensating structural mode interaction was previously explored. It was shown that effective time delay was significantly reduced with the use of HPS; however, the HPS design was seen to have greater residual response than a conventional gain stablized design. Additional work performed to advance and refine the HPS design procedure, to further develop residual response metrics as a basis for alternative structural stability specifications, and to develop strategies for validating HPS design and specification concepts in manned simulation is presented. Stabilization design sensitivity to structural uncertainties and aircraft-centered requirements are also assessed.

Chan, Samuel Y.↗
DOE OSTI2025

Interface, bulk and surface structure of heteroepitaxial altermagnetic α-MnTe films grown on GaAs(111)

Epitaxial MnTe films have recently seen a surge in research into their altermagnetic semiconducting properties. However, those properties may be extremely sensitive to structural and chemical modifications. We report a detailed investigation of the synthesis of the altermagnet α-MnTe on GaAs(111), which reveals the bulk defect structure of this material, the mechanism by which it releases strain from the underlying substrate, and the impact of oxidation on its surface. X-ray diffraction measurements show that α-MnTe layers with thicknesses spanning 45 to 640 nm acquire lattice parameters different from bulk, mostly due to thermal strain caused by the substrate rather than strain from the lattice mismatch. Through high-resolution transmission electron microscopy (TEM) measurement, we then unveil a misfit dislocation array at the interface, revealing the mechanism by which lattice strain is relaxed. TEM also reveals a stacking fault in the bulk, occurring along a glide plane parallel to the interface. The combination of TEM with polarized neutron reflectometry measurements finally reveals the impact of oxidation on the chemistry of the surface of uncapped MnTe. Furthermore, or findings highlight the subtle role of epitaxy in altering the structure of α-MnTe, providing potential opportunities to tune the altermagnetic properties of this material.

Altermagnets↗
NASA NTRS1987

Design sensitivity analysis of rotorcraft airframe structures for vibration reduction

Optimization of rotorcraft structures for vibration reduction was studied. The objective of this study is to develop practical computational procedures for structural optimization of airframes subject to steady-state vibration response constraints. One of the key elements of any such computational procedure is design sensitivity analysis. A method for design sensitivity analysis of airframes under vibration response constraints is presented. The mathematical formulation of the method and its implementation as a new solution sequence in MSC/NASTRAN are described. The results of the application of the method to a simple finite element stick model of the AH-1G helicopter airframe are presented and discussed. Selection of design variables that are most likely to bring about changes in the response at specified locations in the airframe is based on consideration of forced response strain energy. Sensitivity coefficients are determined for the selected design variable set. Constraints on the natural frequencies are also included in addition to the constraints on the steady-state response. Sensitivity coefficients for these constraints are determined. Results of the analysis and insights gained in applying the method to the airframe model are discussed. The general nature of future work to be conducted is described.

Murthy, T. Sreekanta↗
DOE OSTI2020

Accobeam - Acoustic Collimated Beam

Researchers at Los Alamos have developed a collimated acoustic imaging technology for non-destructive characterization of highly attenuating media, such as concrete, rocks, mud, and metal casings. The technology is used to investigate structural defects that could compromise important assets such as well boreholes, building structures and sensitive materials like explosives. Current acoustic methods are often unable to penetrate such materials deeply for more informative analysis, which limits what can be learned about asset structural integrity, crucial information companies require to make investment decisions such as fixing or replacing structures well before assets are completely compromised. ACCObeam provides requisite penetration and high-resolution acoustic imaging with applications in borehole imaging, explosives threat evaluation, and structural health evaluation. This technology will potentially save companies significant money by producing accurate and useful visual analyses to better understand the actual condition of assets in the field and respond accordingly. Los Alamos is searching for a collaboration partner to develop this technology for commercial applications that will lead to licensing opportunities for broad industry deployment.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiple Environmental Influences on the Lightning of Cold-Based Continental Convection. Part II: Sensitivity Tests for Its Charge Structure and Land–Ocean Contrast

In Part I, an electrification scheme was described and a simulation of an observed cold-based storm from the U.S. Great Plains was validated with electrical observations. Most charge in the storm was separated by rebounding collisions of secondary ice originating from prior graupel–snow collisions. In this Part II, sensitivity tests are performed with the control simulation (Part I) and influences from environmental factors (aerosols, temperature, moisture, and shear) on lightning are elucidated. Environmental factors [e.g., convective available potential energy (CAPE)] controlling updraft speed are salient. When ascent is reduced by 30% and 70%, flashes become 70% fewer and disappear, respectively; faster ascent promotes positive cloud-to-ground (+CGs) flashes. Since cloud base is too cold (1°C) for coalescence, cloud condensation nucleus aerosol concentrations do not influence the lightning appreciably. The electrical response to varying concentrations of active ice nuclei is limited by most ice particles being secondary and less sensitive—a natural “buffer.” Imposing a maritime sounding suggests that the land–sea contrast in lightning for such storms is due to the vertical structure of environmental temperature and humidity. Weak CAPE, and both entrainment and condensate weight from a low cloud base, suppress ascent and charging. Maritime thermodynamic conditions reduce simulated flash rates by two orders of magnitude. Reducing aerosol loadings from continental to maritime only slightly reinforces this suppression. Last, a conceptual model is provided for how any simulated storm is either normal because graupel/hail is mostly positively charged or else is inverted/anomalous because graupel/hail is mostly negatively charged, with environmental factors controlling the charging. Impacts from microphysical processes, including three processes of secondary ice production, on lightning are analyzed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assessment and Performance of Flexible Quench Antenna Array Diagnostics for Superconducting Magnets

FNAL has been developing multiple versions of flexible quench antennas (flex-QA), including some specially optimized for high sensitivity and/or high resolution, to characterize quench events and transients during current ramping in superconducting magnets. A fundamental feature in our use of these is the creation of grid-like structures of sensitive elements to cover coil surfaces, with the aim of getting precise localization of magnetic flux-change events. The flex-QA are coupled with fast data-acquisition, allowing comprehensive analysis of signals at the relevant fine time scales. In addition to arrays of various flex-QA types being used during cryogenic testing of superconducting magnets, we also are utilizing a newly developed room temperature test stand to better understand QA response characteristics. The data from actual superconducting magnet tests, warm test stand measurements, and simulation data on the same QA designs allows us to draw conclusions on operational feasibility and plan better for improvements of our sensors. In this paper we present data from the multiple tests performed and analysis results. Flex-QA designs are compared, and their features, options, and optimization discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Tailoring the structure and electrochemical performance of sodium titanate anodes by post-synthesis heating

Sodium titanate anodes synthesized via “chimie-douce” methods generally require a post-synthesis dehydration step. Their crystal structures are sensitive to the heating conditions such as temperature, resulting in distinct sodium storage performance. Herein, using in situ and ex situ high-temperature X-ray diffraction, we studied in detail the structural changes of Na 0.74 Ti 1.815 $\square$ 0.185 O 4 ·1.27H 2 O (NTO) under various heating conditions. Electrochemical characterization revealed that NTOs heated at lower temperatures with layered structures deliver larger capacities than those heated at high temperatures with tunnel structures. Heat treatment at moderate temperatures greatly improves the capacity retention of NTO, especially stabilizing the high voltage processes that are major contributors to the capacity fading, because of the modified crystal structure and surface chemistry. As a result, our findings suggest that post-synthesis heating is a simple and effective strategy to tailor the crystal structure, surface chemistry, and electrochemical properties of sodium titanate anodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Radiatively driven interactions between stratocumulus and synoptic waves

Quasi-geostrophic disturbances on a midlatitude beta-plane channel forced by radiative heating perturbations due to synoptic-scale variations of low-level stratiform cloud are considered. The longitudinal phase of the cloud is linked to that of the low-level streamfunction. Cloudiness is wavelike with cooling above cloudy areas that decreases exponentially with height. No perturbation cooling occurs above cloud-free areas. Two background flows are considered: one is constant and the other has a jet centered near the tropopause. Forced linear steady waves are found. Though infinitesimal amplitude disturbances are considered, the problem is nonlinear because of the coupling between cloud and winds. The resulting structures are sensitive to the phase shift between cloud and streamfunction with strongest coupling for cloud to the west of surface troughs. The waves have vertical scales on the order of the troposphere depth. The stationary structures capture the summertime pattern of stratocumulus off California and its linkage to the mid-Pacific ridge. When zonal-mean cloud cooling is allowed, the mean westerlies are strengthened in the northern half of the channel near the lower boundary. Synoptic-scale amplitudes respond to the mean cloud cooling by increasing (decreasing) just above the cloud in the northern (southern) part of the channel.

Clark, John H. E.↗
NASA NTRS1992

Model localization experiments on a ribbed antenna

In this paper, the model localization (ML) phenomenon is investigated experimentally and analytically to determine the influence of its parameters. For this purpose, a full-scale 12-rib loosely-coupled antenna testbed with small imperfections is dynamically tested for various levels of inter-rib coupling stiffness and excitation force. The experimental results are described herein. Using a simplified numerical model of the structure, a sensitivity analysis of the modal behavior is also performed. The numerical and experimental results are shown to agree remarkably well, thereby providing conclusive validation of the ML phenomenon on a testbed having the dynamic characteristics of space structures.

Levine-West, M. B.↗
DOE OSTI2020

Quantifying redox heterogeneity in single-crystalline LiCoO 2 cathode particles

Active cathode particles are fundamental architectural units for the composite electrode of Li-ion batteries. The microstructure of the particles has a profound impact on their behavior and, consequently, on the cell-level electrochemical performance. LiCoO 2 (LCO, a dominant cathode material) is often in the form of well-shaped particles, a few micrometres in size, with good crystallinity. In contrast to secondary particles (an agglomeration of many fine primary grains), which are the other common form of battery particles populated with structural and chemical defects, it is often anticipated that good particle crystallinity leads to superior mechanical robustness and suppressed charge heterogeneity. Yet, sub-particle level charge inhomogeneity in LCO particles has been widely reported in the literature, posing a frontier challenge in this field. Herein, this topic is revisited and it is demonstrated that X-ray absorption spectra on single-crystalline particles with highly anisotropic lattice structures are sensitive to the polarization configuration of the incident X-rays, causing some degree of ambiguity in analyzing the local spectroscopic fingerprint. To tackle this issue, a methodology is developed that extracts the white-line peak energy in the X-ray absorption near-edge structure spectra as a key data attribute for representing the local state of charge in the LCO crystal. This method demonstrates significantly improved accuracy and reveals the mesoscale chemical complexity in LCO particles with better fidelity. In addition to the implications on the importance of particle engineering for LCO cathodes, the method developed herein also has significant impact on spectro-microscopic studies of single-crystalline materials at synchrotron facilities, which is broadly applicable to a wide range of scientific disciplines well beyond battery research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Site-specific electronic structure of covalently linked bimetallic dyads from nitrogen K-edge x-ray absorption spectroscopy

A nitrogen K-edge x-ray absorption near-edge structure (XANES) survey is presented for tetrapyrido[3,2-a:',3'-c:3'',2''-h:2''',3'''-j]phenazine (tpphz)-bridged bimetallic assemblies that couple chromophore and catalyst transition metal complexes for light driven catalysis, as well as their individual molecular constituents. We demonstrate the high N site sensitivity of the N pre-edge XANES features, which are energetically well-separated for the phenazine bridge N atoms and for the individual metal-bound N atoms of the inner coordination sphere ligands. By comparison with the time-dependent density functional theory calculated spectra, we determine the origins of these distinguishable spectral features. We find that metal coordination generates large shifts toward higher energy for the metal-bound N atoms, with increasing shift for 3d < 4d < 5d metal bonding. This is attributed to increasing ligand-to-metal σ donation that increases the effective charge of the bound N atoms and stabilizes the N 1s core electrons. In contrast, the phenazine bridge N pre-edge peak is found at a lower energy due to stabilization of the low energy electron accepting orbital localized on the phenazine motif. While no sensitivity to ground state electronic coupling between the individual molecular subunits was observed, the spectra are sensitive to structural distortions of the tpphz bridge. Here these results demonstrate N K-edge XANES as a local probe of electronic structure in large bridging ligand motifs, able to distinctly investigate the ligand-centered orbitals involved in metal-to-ligand and ligand-to-ligand electron transfer following light absorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

Design sensitivity analysis and optimization of built-up structures

Developments during the course of the research in design sensitivity analysis and optimization of built-up structures, with both sizing and shape design variables, show clearly that a unified variational approach to design sensitivity analysis can yield derivatives of structural response with respect to design. Rigorous and practically computable results for structural components and built-up structures have been demonstrated and used to solve design optimization problems.

Choi, Kyung K.↗
NASA NTRS2016

Nondestructive Evaluation of Adhesive Bonds via Ultrasonic Phase Measurements

The use of advanced composites utilizing adhesively bonded structures offers advantages in weight and cost for both the aerospace and automotive industries. Conventional nondestructive evaluation (NDE) has proved unable to reliably detect weak bonds or bond deterioration during service life conditions. A new nondestructive technique for quantitatively measuring adhesive bond strength is demonstrated. In this paper, an ultrasonic technique employing constant frequency pulsed phased-locked loop (CFPPLL) circuitry to monitor the phase response of a bonded structure from change in thermal stress is discussed. Theoretical research suggests that the thermal response of a bonded interface relates well with the quality of the adhesive bond. In particular, the effective stiffness of the adhesive-adherent interface may be extracted from the thermal phase response of the structure. The sensitivity of the CFPPLL instrument allows detection of bond pathologies that have been previously difficult-to-detect. Theoretical results with this ultrasonic technique on single epoxy lap joint (SLJ) specimens are presented and discussed. This technique has the potential to advance the use of adhesive bonds - and by association, advanced composite structures - by providing a reliable method to measure adhesive bond strength, thus permitting more complex, lightweight, and safe designs.

Haldren, Harold A.↗
DOE OSTI2022

The MeerKAT Galaxy Cluster Legacy Survey I. Survey Overview and Highlights

MeerKAT’s large number (64) of 13.5 m diameter antennas, spanning 8 km with a densely packed 1 km core, create a powerful instrument for wide-area surveys, with high sensitivity over a wide range of angular scales. The MeerKAT Galaxy Cluster Legacy Survey (MGCLS) is a programme of long-track MeerKAT L-band (900–1670 MHz) observations of 115 galaxy clusters, observed for ~6–10 h each in full polarisation. The first legacy product data release (DR1), made available with this paper, includes the MeerKAT visibilities, basic image cubes at ~8" resolution, and enhanced spectral and polarisation image cubes at ~8" and 15" resolutions. Typical sensitivities for the full-resolution MGCLS image products range from ~3–5 μJy beam –1 . The basic cubes are full-field and span 2° × 2°. The enhanced products consist of the inner 1.2° × 1.2° field of view, corrected for the primary beam. The survey is fully sensitive to structures up to ~10' scales, and the wide bandwidth allows spectral and Faraday rotation mapping. Relatively narrow frequency channels (209 kHz) are also used to provide H I mapping in windows of 0 < z < 0.09 and 0.19 < z < 0.48. Here, in this paper, we provide an overview of the survey and the DR1 products, including caveats for usage. We present some initial results from the survey, both for their intrinsic scientific value and to highlight the capabilities for further exploration with these data. These include a primary-beam-corrected compact source catalogue of ~626 000 sources for the full survey and an optical and infrared cross-matched catalogue for compact sources in the primary-beam-corrected areas of Abell 209 and Abell S295. We examine dust unbiased star-formation rates as a function of cluster-centric radius in Abell 209, extending out to 3.5 R 200 . We find no dependence of the star-formation rate on distance from the cluster centre, and we observe a small excess of the radio-to-100 μm flux ratio towards the centre of Abell 209 that may reflect a ram pressure enhancement in the denser environment. We detect diffuse cluster radio emission in 62 of the surveyed systems and present a catalogue of the 99 diffuse cluster emission structures, of which 56 are new. These include mini-halos, halos, relics, and other diffuse structures for which no suitable characterisation currently exists. We highlight some of the radio galaxies that challenge current paradigms, such as trident-shaped structures, jets that remain well collimated far beyond their bending radius, and filamentary features linked to radio galaxies that likely illuminate magnetic flux tubes in the intracluster medium. We also present early results from the H I analysis of four clusters, which show a wide variety of H I mass distributions that reflect both sensitivity and intrinsic cluster effects, and the serendipitous discovery of a group in the foreground of Abell 3365.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRSDate not supplied

Uncertainty Quantification and Sensitivity Analysis in Process-Structure-Property Simulations for Laser Powder Bed Fusion Additive Manufacturing

Process variations and process-induced defects like porosity cause significant uncertainty in the microstructure and mechanical behavior of additively manufactured metals. Establishing process-structure-property (PSP) relationships and quantifying uncertainty using experiments alone is costly, especially for structural applications where mechanical allowables must be established for qualification and certification. This work presents a PSP simulation framework for laser powder bed fusion with a focus on uncertainty quantification through probabilistic calibration and multi-fidelity uncertainty propagation. Motivated by phenomenological input parameters related to grain nucleation and growth that are difficult to characterize, a global sensitivity analysis (GSA) is completed. Through GSA, the most important input parameters are identified based on their influence on the statistical distributions of microstructural metrics that influence mechanical behavior, including grain size, morphology, and crystallographic texture. The results provide insight on what experiments are necessary to quantify and control PSP uncertainties, particularly those associated with the more challenging input parameters.

additive manufacturing↗
NASA NTRS1991

The zeroes of controlled structures - Sensor/actuator attributes and structural modelling

The effects of sensor/actuator design and modeling decisions on the zero frequencies of single input single output structural systems are explored. A zero definition based on the high gain closed loop character of the poles of a system is used to study parametrically zeroes as a function of sensor and actuator location. An infinite order model is adopted so that the effects of finite order modeling are removed. Examples focus on point or localized actuators and sensors and simple uniform structures. The sensitivity of the zero frequencies to changes in the sensor and actuator location for both collocated and non-collocated cases are presented. Non-minimum phase behavior is visible in only certain non-collocated situations. In addition to the sensor/actuator attributes, the zeroes are shown to be a function of the truncation and discretization used to model the structural response for collocated and dual systems. Methods for improving the zero predictions in the control bandwidth are suggested.

Fleming, Farla M.↗
DOE OSTI2021

Quantum oscillations in the field-induced ferromagnetic state of MnBi 2-x Sb x Te 4

The intrinsic antiferromagnetic topological insulator MnBi2Te4 undergoes a metamagnetic transition in a c-axis magnetic field. It has been predicted that ferromagnetic MnBi2Te4 is an ideal Weyl semimetal with a single pair of Weyl nodes. Here we report measurements of quantum oscillations detected in the field-induced ferromagnetic phase of MnBi 2-x Sb x Te 4 , where Sb substitution tunes the majority carriers from electrons to holes. Single-frequency Shubnikov–de Haas oscillations were observed in a wide range of Sb concentrations (0.54≤x≤1.21). The evolution of the oscillation frequency and the effective mass shows reasonable agreement with the Weyl semimetal band structure of ferromagnetic MnBi 2 Te 4 predicted by density functional calculations. Intriguingly, the quantum oscillation frequency shows a strong temperature dependence, indicating that the electronic structure depends sensitively on magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1991

Microbial growth and physiology in space - A review

An overview of microbial behavior in closed environments is given with attention to data related to simulated microgravity and actual space flight. Microbes are described in terms of antibiotic sensitivity, subcellular structure, and physiology, and the combined effects are considered of weightlessness and cosmic radiation on human immunity to such microorganisms. Space flight results report such effects as increased phage induction, accelerated microbial growth rates, and the increased risk of disease communication and microbial exchange aboard confining spacecraft. Ultrastructural changes are also noted in the nuclei, cell membranes, and cytoplasmic streaming, and it appears that antibiotic sensitivity is reduced under both actual and simulated conditions of spaceflight.

Cioletti, Louis A.↗