Search NASA⌕ Search

SEARCH · Search NASA

Results for “subspace”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Restoration of multichannel microwave radiometric images

A constrained iterative image restoration method is applied to multichannel diffraction-limited imagery. This method is based on the Gerchberg-Papoulis algorithm utilizing incomplete information and partial constraints. The procedure is described using the orthogonal projection operators which project onto two prescribed subspaces iteratively. Its properties and limitations are presented. The effect of noise was investigated and a better understanding of the performance of the algorithm with noisy data has been achieved. The restoration scheme with the selection of appropriate constraints was applied to a practical problem. The 6.6, 10.7, 18, and 21 GHz satellite images obtained by the scanning multichannel microwave radiometer (SMMR), each having different spatial resolution, were restored to a common, high resolution (that of the 37 GHz channels) to demonstrate the effectiveness of the method. Both simulated data and real data were used in this study. The restored multichannel images may be utilized to retrieve rainfall distributions.

Chin, R. T.↗
NASA NTRS1986

Solution of the symmetric eigenproblem AX=lambda BX by delayed division

Delayed division is an iterative method for solving the linear eigenvalue problem AX = lambda BX for a limited number of small eigenvalues and their corresponding eigenvectors. The distinctive feature of the method is the reduction of the problem to an approximate triangular form by systematically dropping quadratic terms in the eigenvalue lambda. The report describes the pivoting strategy in the reduction and the method for preserving symmetry in submatrices at each reduction step. Along with the approximate triangular reduction, the report extends some techniques used in the method of inverse subspace iteration. Examples are included for problems of varying complexity.

Thurston, G. A.↗
NASA NTRS1986

A geometric approach to failure detection and identification in linear systems

Using concepts of (C,A)-invariant and unobservability (complementary observability) subspaces, a geometric formulation of the failure detection and identification filter problem is stated. Using these geometric concepts, it is shown that it is possible to design a causal linear time-invariant processor that can be used to detect and uniquely identify a component failure in a linear time-invariant system, assuming: (1) The components can fail simultaneously, and (2) The components can fail only one at a time. In addition, a geometric formulation of Beard's failure detection filter problem is stated. This new formulation completely clarifies of output separability and mutual detectability introduced by Beard and also exploits the dual relationship between a restricted version of the failure detection and identification problem and the control decoupling problem. Moreover, the frequency domain interpretation of the results is used to relate the concepts of failure sensitive observers with the generalized parity relations introduced by Chow. This interpretation unifies the various failure detection and identification concepts and design procedures.

Massoumnia, M. A.↗
NASA NTRS1986

Spline-based distributed system identification with application to large space antennas

A parameter and state estimation technique for distributed models is demonstrated through the solution of a problem generic to large space antenna system identification. Assuming the position of the reflective surface of the maypole (hoop/column) antenna to be approximated by the static two-dimensional, stretched-membrane partial differential equation with variable-stiffness coefficient functions, a spline-based approximation procedure is described that estimates the shape and stiffness functions from data set observations. For given stiffness functions, the Galerkin projection with linear spline-based functions is applied to project the distributed problem onto a finite-dimensional subspace wherein algebraic equations exist for determining a static shape (state) prediction. The stiffness functions are then parameterized by cubic splines and the parameters estimated by an output error technique. Numerical results are presented for data descriptive of a 100-m-diameter maypole antenna.

Banks, H. T.↗
NASA NTRS1986

Spline-based Rayleigh-Ritz methods for the approximation of the natural modes of vibration for flexible beams with tip bodies

Rayleigh-Ritz methods for the approximation of the natural modes for a class of vibration problems involving flexible beams with tip bodies using subspaces of piecewise polynomial spline functions are developed. An abstract operator-theoretic formulation of the eigenvalue problem is derived and spectral properties investigated. The existing theory for spline-based Rayleigh-Ritz methods applied to elliptic differential operators and the approximation properties of interpolatory splines are used to argue convergence and establish rates of convergence. An example and numerical results are discussed.

Rosen, I. G.↗
NASA NTRS1985

Considerations on solving problems with multiple scales

An overview is given on considerations involved in the computation of solution to problems involving several scales. Examples of problems with multiple scales are studied, showing that the presence of multiple scales in a physical system may be manifested in different ways which depend on the degree of interaction between the various scales. Numerical methods commonly used to solve problems with multiple scales discussed, and it is found that the effective methods are based on subspace projection.

Chin, R. C. Y.↗
NASA NTRS1987

RKH space approximations for the feedback operator in a linear hereditary control system

Computational implementation of feedback control laws for linear hereditary systems requires the approximation of infinite dimensional feedback operators with finite dimensional operators. The dense subspaces of K-polygonal functions in reproducing kernel Hilbert spaces, RKH spaces, suggest finite dimensional approximations of the matrix representations of the control operators. A convergence theorem is developed for the approximations and the numerical implementation of the approximations is discussed.

Reneke, J. A.↗
NASA NTRS1987

On Lipschitz continuity of nonlinear differential operators

In connection with approximations for nonlinear evolution equations, it is standard to assume that nonlinear terms are at least locally Lipschitz continuous. However, it is shown here that f = f(X,del sub u(X)) is Lipschitz continuous from the subspace W sup 1, infinity is a subset of L sub 2 into W sup 1,2, and maps W sup 2, infinity into W sup 1, infinity, if and only if f is affine with W sup 1, infinity coefficients. In fact, a local version of this claim is proved.

Keeling, Stephen L.↗
NASA NTRS1987

On the eigenvalue and eigenvector derivatives of a general matrix

The existence of differentiable eigenvalues and eigenvectors for a general matrix is addressed. The eigenspace which contains differentiable eigenvectors is determined and computed by using the concept of subspace intersection in conjunction with the singular value decomposition algorithm. The differentiable eigenvectors associated with repeated eigenvalues should be simultaneously the eigenvectors of the general matrix and its corresponding sensitivity matrix. Furthermore, the derivatives for differentiable eigenvectors associated with repeated eigenvalues can be computed using higher order derivatives of the matrix, whereas the corresponding eigenvalue derivatives are the eigenvalues of the sensitivity matrix.

Juang, Jer-Nan↗
NASA NTRS1987

TRANAIR - A computer code for transonic analyses of arbitrary configurations

Attention is given to a new approach to solving full potential equations about arbitrary configurations. Numerical algorithms from such fields as finite elements, preconditioned Krylov subspace methods, discrete Fourier analysis, and integral equations are combined to take advantage of the size and speed of current and emerging supercomputers. On the basis of this appraoch, a robust, efficient and easy to use computer code referred to as TRANAIR has been developed for transonic analysis of complex geometries.

Samant, S. S.↗
NASA NTRS1986

Necessary and sufficient conditions for parameter convergence in adaptive control

Using Generalized Harmonic Analysis, a complete description of parameter convergence in Model Reference Adaptive Control (MRAC) is given in terms of the spectrum of the exogenous reference input signal. Roughly speaking, if the reference signal 'contains enough frequencies' then the parameter vector converges to its correct value. If not, it converges to an easily characterizable subspace in parameter space.

Boyd, Stephen↗
NASA NTRS1986

A new approach to the solution of boundary value problems involving complex configurations

A new approach for solving certain types of boundary value problems about complex configurations is presented. Numerical algorithms from such diverse fields as finite elements, preconditioned Krylov subspace methods, discrete Fourier analysis, and integral equations are combined to take advantage of the memory, speed and architecture of current and emerging supercomputers. Although the approach has application to many branches of computational physics, the present effort is concentrated in areas of Computational Fluid Dynamics (CFD) such as steady nonlinear aerodynamics, time harmonic unsteady aerodynamics, and aeroacoustics. The most significant attribute of the approach is that it can handle truly arbitrary boundary geometries and eliminates the difficult task of generating surface fitted grids.

Rubbert, P. E.↗
NASA NTRS1988

Parallel computer methods for eigenvalue extraction

A new numerical algorithm for the solution of large-order eigenproblems typically encountered in linear elastic finite element systems is presented. The architecture of parallel processing is used in the algorithm to achieve increased speed and efficiency of calculations. The algorithm is based on the frontal technique for the solution of linear simultaneous equations and the modified subspace eigenanalysis method for the solution of the eigenproblem. The advantages of this new algorithm in parallel computer architecture are discussed.

Akl, Fred↗
NASA NTRS1987

Cluster analysis of multiple planetary flow regimes

A modified cluster analysis method was developed to identify spatial patterns of planetary flow regimes, and to study transitions between them. This method was applied first to a simple deterministic model and second to Northern Hemisphere (NH) 500 mb data. The dynamical model is governed by the fully-nonlinear, equivalent-barotropic vorticity equation on the sphere. Clusters of point in the model's phase space are associated with either a few persistent or with many transient events. Two stationary clusters have patterns similar to unstable stationary model solutions, zonal, or blocked. Transient clusters of wave trains serve as way stations between the stationary ones. For the NH data, cluster analysis was performed in the subspace of the first seven empirical orthogonal functions (EOFs). Stationary clusters are found in the low-frequency band of more than 10 days, and transient clusters in the bandpass frequency window between 2.5 and 6 days. In the low-frequency band three pairs of clusters determine, respectively, EOFs 1, 2, and 3. They exhibit well-known regional features, such as blocking, the Pacific/North American (PNA) pattern and wave trains. Both model and low-pass data show strong bimodality. Clusters in the bandpass window show wave-train patterns in the two jet exit regions. They are related, as in the model, to transitions between stationary clusters.

Mo, Kingtse↗
NASA NTRS1988

Three parallel computation methods for structural vibration analysis

The Lanczos (1950), multisectioning, and subspace iteration sequential methods for vibration analysis presently used as bases for three parallel algorithms are noted, in the aftermath of three example problems, to maintain reasonable accuracy in the computation of vibration frequencies. Significant computation time reductions are obtained as the number of processors increases. An analysis is made of the performance of each method, in order to characterize relative strengths and weaknesses as well as to identify those parameters that most strongly affect computation efficiency.

Storaasli, Olaf↗
NASA NTRS1988

Load balancing and closed chain multiple arm control

The authors give the general dynamical equations for several rigid link manipulators rigidly grasping a commonly held rigid object. It is shown that the number of arm-configuration degrees of freedom lost due to imposing the closed-loop kinematic constraints is the same as the number of degrees of freedom gained for controlling the internal forces of the closed-chain system. This number is equal to the dimension of the kernel of the Jacobian operator which transforms contact forces to the net forces acting on the held object, and it is shown that this kernel can be identified with the subspace of controllable internal forces of the closed-chain system. Control of these forces makes it possible to regulate the grasping forces imparted to the held object or to control the load taken by each arm. It is shown that the internal forces can be influenced without affecting the control of the configuration degrees of freedom. Control laws of the feedback linearization type are shown to be useful for controlling the location and attitude of a frame fixed with respect to the held object, while simultaneously controlling the internal forces of the closed-chain system. Force feedback can be used to linearize and control the system even when the held object has unknown mass properties. If saturation effects are ignored, an unconstrained quadratic optimization can be performed to distribute the load optimally among the joint actuators.

Kreutz, Kenneth↗
NASA NTRS1987

Hierarchically partitioned nonlinear equation solvers

By partitioning solution space into a number of subspaces, a new multiply constrained partitioned Newton-Raphson nonlinear equation solver is developed. Specifically, for a given iteration, each of the various separate partitions are individually and simultaneously controlled. Due to the generality of the scheme, a hierarchy of partition levels can be employed. For finite-element-type applications, this includes the possibility of degree-of-freedom, nodal, elemental, geometric substructural, material and kinematically nonlinear group controls. It is noted that such partitioning can be continuously updated, depending on solution conditioning. In this context, convergence is ascertained at the individual partition level.

Padovan, Joseph↗
NASA NTRS1988

Cluster analysis of multiple planetary flow regimes

A modified cluster analysis method developed for the classification of quasi-stationary events into a few planetary flow regimes and for the examination of transitions between these regimes is described. The method was applied first to a simple deterministic model and then to a 500-mbar data set for Northern Hemisphere (NH), for which cluster analysis was carried out in the subspace of the first seven empirical orthogonal functions (EOFs). Stationary clusters were found in the low-frequency band of more than 10 days, while transient clusters were found in the band-pass frequency window between 2.5 and 6 days. In the low-frequency band, three pairs of clusters determined EOFs 1, 2, and 3, respectively; they exhibited well-known regional features, such as blocking, the Pacific/North American pattern, and wave trains. Both model and low-pass data exhibited strong bimodality.

Mo, Kingtse↗