Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Tunable Fluorescence from Dye-Modified DNA-Assembled Plasmonic Nanocube Arrays

Colloidal crystal engineering with DNA on template-confined surfaces is used to prepare arrays of nanocube-based plasmonic antennas and deliberately place dyes with sub-nm precision into their hotspots, on the DNA bonds that confine the cubes to the underlying gold substrate. This combined top-down and bottom-up approach provides independent control over both the plasmonic gap and photonic lattice modes of the surface-confined particle assemblies and allows for the tuning of the interactions between the excited dyes and plasmonically active antennas. Furthermore, the gap mode of the antennas can be modified in situ by utilizing the solvent-dependent structure of the DNA bonds. This is studied by placing two dyes, with different emission wavelengths, under the nanocubes and recording their solvent-dependent emission. Furthermore, it is shown that dye emission not only depends upon the in-plane structure of the antennas but also the size of the gap, which is regulated with solvent. Importantly, this approach allows for the systematic understanding of the relationship between nanoscale architecture and plasmonically coupled dye emission, and points toward the use of colloidal crystal engineering with DNA to create stimuli responsive architectures, which can find use in chemical sensing and tunable light sources.

36 MATERIALS SCIENCE↗

Alignment of optical system components using an ADM beam through a null assembly

A system for testing an optical surface includes a rangefinder configured to emit a light beam and a null assembly located between the rangefinder and the optical surface. The null assembly is configured to receive and to reflect the emitted light beam toward the optical surface. The light beam reflected from the null assembly is further reflected back from the optical surface toward the null assembly as a return light beam. The rangefinder is configured to measure a distance to the optical surface using the return light beam.

Hayden, Joseph E.↗

Oxidative Self-Assembly of Au/Ag/Pt Alloy Nanoparticles into High-Surface Area, Mesoporous, and Conductive Aerogels for Methanol Electro-oxidation

The ability to assemble nanoparticles (NPs) into functional nanostructures is critical for the advancement of nanoscience. However, common assembling techniques utilize organic ligands or biomolecules, which are detrimental for charge transport and interparticle coupling, which impede the efficient integration of low-dimensional properties. Herein, we report a methodology for the self-supported assembly of ultra-small (3-6 nm) Au/Ag/Pt alloy NPs into large, free-standing alloy superstructures (aerogels) that exhibit direct NP connectivity, high surface area (125 ± 0.43 to142 ± 0.93 m 2 /g) and mesoporosity (21.6 ± 2.2 nm), and superior electrocatalytic activity for methanol oxidation reaction (MOR). Precursor Au/Ag/Pt alloy NPs and hydrogels were synthesized via stepwise galvanic replacement reaction (GRR) of the glutathione (GSH)-coated Ag NPs, followed by oxidative removal of the surfactant ligands. The composition of alloy aerogels was tuned by varying the oxidant/GSH molar ratio, which governs the extent of Ag dealloying with in-situ generated HNO 3 and increases the exposure of Au and Pt on the aerogel surface. The alloy aerogels exhibit superior MOR mass activity, which is 21.4 and 2.5 times higher than those of the precursor NPs and commercial Pt (40 wt.%)/C electrocatalysts, respectively. The MOR surface-specific activity (MOR-SSA) of the aerogels was improved by >17% when the Pt content was increased from 22.4% to 31.2%. The aerogels exhibit improved electronic conductivity, enhanced tolerance for carbonaceous byproducts, and maintained ~94% of the initial MOR activity at -0.3 V for 24 h in an alkaline medium. In conclusion, the interconnected porous superstructure of the aerogel provides a facile conduit for molecules to reach the pristine active surface whereas the presence of oxophilic Au promotes the dissociative adsorption of methanol, enabling the Au/Ag/Pt alloy aerogel a high efficiency, durable electrocatalyst for next generation of energy conversion studies.

36 MATERIALS SCIENCE↗

Spontaneous Stepwise Self-Assembly of a Polyoxometalate-Organic Hybrid into Catalytically Active One-Dimensional Anisotropic Structures

An inorganic–organic hybrid surfactant with a hexavanadate cluster as the polar head group was designed and observed to assemble into micelle structures, which further spontaneously coagulate into a 1D anisotropic structure in aqueous solutions. Such a hierarchical self-assembly process is driven by the cooperation of varied noncovalent interactions, including hydrophobic, electrostatic, and hydrogen-bonding interactions. The hydrophobic interaction drives the quick formation of the micelle structure; electrostatic interactions involving counterions leads to the further coagulation of the micelles into larger assemblies. This process is similar to the crystallization process, but the specific counterions and the directional hydrogen bonding lead to the 1D growth of the final assemblies. Since most of the hexavanadates are exposed to the surface, the 1D assembly with nanoscale thickness is a highly efficient heterogeneous catalyst for the oxidation of organic sulfides with appreciable recyclability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bilayer self-assembly on a hydrophilic, deterministically nano-patterned surface

We present measurements of the in-situ, microscopic architecture of a self-assembled bilayer at the interface between a regularly nano-patterned surface and an aqueous sub-phase using neutron reflectometry. The substrate is patterned with a rectangular array of nano-scaled holes. Because of the high quality of the pattern, using neutron reflectometry, we are able to map the surface-normal density distribution of the patterned silicon, the penetration of water into the pattern, and the distribution of a deposited film inside and outside of the etched holes. In this study, 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) single bilayers were deposited on the hydrophilic patterned surface. For bilayers deposited either by vesicle fusion (VF) or by the Langmuir Schaefer (L-S) technique, the most consistent model found to fit the data shows that the lipids form bilayer coatings on top of the substrate as well as the bottoms of the holes in an essentially conformal fashion. However, while there is a single bilayer on the unetched silicon surface, the lipids coating the bottoms of the holes form a complex bimodal structure consistent with a rough surface produced by the etching process. This study provides insight into film transfer both outside and inside regular nano-patterned features.

Smith, Gregory Scott↗

MLCT excited states at interfaces and in rigid media: Applications in energy conversion

In this proposal for continued support from the DOE, we propose to build on our understanding of light-driven electron transfer by molecules and molecular assemblies on oxide surfaces. We will conduct a systematic investigation of injection and back electron transfer dynamics on the surfaces of thin (1-10 μm), mesoporous, transparent conducting oxide films consisting of 10-20 nm tin-doped indium oxide (Sn:In2O3, ITO)) nanoparticles. These materials are unique because they mimic the morphology, surface area, and oxide nature of conventional mesoporous, nanocrystalline metal oxide thin films such as TiO 2 , SnO2, and NiO used in DSSC and DSPEC applications but they are conductive with high electron mobilities (0.1-10 cm2 V-1 s-1) and conductivities (101-104 Ω-1 cm-1) over a wide range of applied potentials. Their high conductivities and metallic behavior allow the Fermi level at nanoparticle surfaces to be tuned systematically by varying an applied bias. We will investigate injection, intra-assembly, and back electron transfer dynamics on nanoITO by transient absorption measurements on the picosecond to millisecond timescales. One series of experiments will build on initial results from DOE-supported research and focus on the bias- and medium-dependence of interfacial electron transfer by surface-bound molecular chromophores to investigate: i) the bias dependence of injection and back electron transfer, ii) injection by short-lived, otherwise inaccessible excited-states, and iii) medium effects. In parallel, we will investigate the dynamic interfacial properties of nanoITO-bound molecular assemblies designed for photogalvanic solar energy conversion. These studies will focus on surface-prepared, layer-by-layer donor-chromophore-acceptor assemblies in which inter-molecular excited-state quenching leads to redox separation as opposed to interfacial electron transfer quenching by the semiconductor material. Transient absorption measurements performed on nanoITO|-acceptor-chromophore-donor (photogalvanic anode) and nanoITO|-donor-chromophore-acceptor (photogalvanic cathode) assemblies will be used to explore: i) light-induced intermolecular electron transfer in layer-by-layer assemblies and ii) bias dependence on transient redox energy storage and long range (>5 nm) electron transfer reactions.

30 DIRECT ENERGY CONVERSION↗

Feasibility Study of Graphite Epoxy Antenna for a Microwave Limb Sounder Radiometer (MLSR)

Results are presented of a feasibility study to design graphite epoxy antenna reflectors for a jet propulsion laboratory microwave limb sounder instrument (MLSR). Two general configurations of the offset elliptic parabolic reflectors are presented that will meet the requirements on geometry and reflector accuracy. The designs consist of sandwich construction for the primary reflectors, secondary reflector support structure and cross-tie members between reflector pairs. Graphite epoxy materials of 3 and 6 plies are used in the facesheets of the sandwich. An aluminum honeycomb is used for the core. A built-in adjustment system is proposed to reduce surface distortions during assembly. The manufacturing and environmental effects are expected to result in surface distortions less than .0015 inch and pointing errors less than .002 degree.

Source record↗

Microscopic studies of a SnO{sub 2}/{alpha}-Fe{sub 2}O{sub 3} architectural nanocomposite using Moessbauer spectroscopic and magnetic measurements

A SnO{sub 2}/{alpha}-Fe{sub 2}O{sub 3} architectural nanocomposite, which was evidenced as SnO{sub 2} nanorod arrays assembled on the surface of {alpha}-Fe{sub 2}O{sub 3} nanotubes in our previous study, was investigated microscopically by means of Moessbauer spectroscopic and magnetic measurements. It was found for the SnO{sub 2} nanorods that Fe{sup 3+} ions substituted slightly to Sn{sub 0.998}Fe{sub 0.00}O{sub 2}. Concerning the {alpha}-Fe{sub 2}O{sub 3} tubes, the Morin transition, which was completely suppressed in the mother, SnO{sub 2}-free {alpha}-Fe{sub 2}O{sub 3} nanotubes, was found to be recovered locally. We speculate that it takes place in the interface area as a result of structural modification needed for the connection with the SnO{sub 2} nanorods. - Graphic abstract: {sup 57}Fe Moessbauer spectrum of SnO{sub 2}/{alpha}-Fe{sub 2}O{sub 3} architectural nanocomposite evidenced as SnO{sub 2} nanorod arrays assembled on the surface of {alpha}-Fe{sub 2}O{sub 3} nanotubes. (I: Fe-doped SnO{sub 2} nanorods, II: {alpha}-Fe{sub 2}O{sub 3} nanotubes) It was found for the SnO{sub 2} nanorods that Fe{sup 3+} ions substituted slightly to Sn{sub 0.998}Fe{sub 0.002}O{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Antifouling Properties of a Self-Assembling Glutamic Acid-Lysine Zwitterionic Polymer Surface Coating

There is a necessity for the development of antifouling materials to resist adsorption of biomacromolecules. Here we describe the preparation of a novel zwitterionic block copolymer with the potential to prevent or delay the formation of microbial biofilms. The block copolymer comprised a zwitterionic (hydrophilic) section of alternating glutamic acid (negatively charged) and lysine (positively charged) units and a hydrophobic polystyrene section. Cryo-TEM and dynamic light-scattering (DLS) results showed that, on average, the block copolymer self-assembled into 7-nm-diameter micelles in aqueous solutions (0 to 100 mM NaCl, pH 6). Quartz crystal microbalance with dissipation monitoring (QCM-D), atomic force microscopy (AFM), and contact angle measurements demonstrated that the block copolymer self-assembled into a brush-like monolayer on polystyrene surfaces. The brush-like monolayer produced from a 100 mg/L block copolymer solution exhibited an average distance, d, of approximately 4-8 nm between each block copolymer molecule (center to center). Once the brush-like monolayer self-assembled, it reduced EPS adsorption onto the polystyrene surface by similar to 70% (mass), reduced the rate of bacterial attachment by >80%, and inhibited the development of thick biofilms. QCM-D results revealed that the EPS molecules penetrate between the chains of the brush and adsorb onto the polystyrene surface. Additionally, AFM analyses showed that the brush-like monolayer prevents the adhesion of large (>d) hydrophilic colloids onto the surface via hydration repulsion; yet, molecules or colloids small enough to fit between the brush polymers (<d) were able to be adsorbed onto the surface via van der Waals interactions. Overall, we found that the penetration of extracellular organelles, as well as biopolymers through the brush, is essential for the failure of the antifouling coating, and likely could be prevented through tuning of the brush density. Stability and biofilm development testing on multiple surfaces (polypropylene, glass, and stainless steel) support practical applications of this novel block copolymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systems and Methods for the Electrodeposition of a Nickel-cobalt Alloy

Systems and methods for electrodepositing a nickel-cobalt alloy using a rotating cylinder electrode assembly with a plating surface and an electrical contact. The assembly is placed within a plating bath and rotated while running a plating cycle. Nickel-cobalt alloy deposition is selectively controlled by controlling current density distribution and/or cobalt content in the plating bath while running the plating cycle to deposit an alloy of a desired yield strength onto the plating surface in a single plating cycle. In various embodiments, the rotating cylinder may be used as an insitu monitoring method to assist in obtaining the properties desired.

Ogozalek, Nance Jo↗

Self-assembly of acetate adsorbates drives atomic rearrangement on the Au(110) surface

Weak inter-adsorbate interactions are shown to play a crucial role in determining surface structure, with major implications for its catalytic reactivity. This is exemplified here in the case of acetate bound to Au(110), where the small extra energy of the van der Waals interactions among the surface-bound groups drives massive restructuring of the underlying Au. Acetate is a key intermediate in electro-oxidation of CO 2 and a poison in partial oxidation reactions. Metal atom migration originates at surface defects and is likely facilitated by weakened Au–Au interactions due to bonding with the acetate. Even though the acetate is a relatively small molecule, weak intermolecular interaction provides the energy required for molecular self-assembly and reorganization of the metal surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of temperature distribution on a new linear Fresnel receiver assembly under high solar flux

A linear Fresnel collector design with an operation temperature of 300 degrees C or above typically requires a solar flux concentration ratio of at least 20 on the surfaces of the receiver assembly. For the commercial linear Fresnel collector design in this work, the receiver assembly includes a secondary reflector and an evacuated receiver tube. The high-concentration solar flux may impose additional operating-temperature requirements on the secondary reflector and receiver tube. Thus, a careful heat-transfer analysis is necessary to understand the operating temperature of the receiver assembly component surfaces under design and off-design conditions to guide appropriate material selections. In this work, a numerical heat-transfer analysis is performed to calculate the temperature distribution of the surfaces of the secondary reflector and receiver glass envelope for a commercial collector design. Operating conditions examined in the heat-transfer analysis include various wind speeds and solar concentration ratios. The results indicate a surface temperature higher than 100 degrees C on the secondary reflector surface, which suggests that a more advanced secondary reflector material is needed. The established heat-transfer model can be used for optimization of the other types of linear Fresnel collectors.

14 SOLAR ENERGY↗

Electron Dose-Controlled Formation, Growth, and Assembly of Nanoclusters and Nanoparticles from Aurophilic Au(I)–Thiolate Ensemble on Surfaces

The ability to precisely control electron irradiationinduced formation, growth, and assembly of nanoclusters or nanoparticles on a solid surface is important for design and creation of catalytically or chemically active surface sites and interfaces free from chemical reducing agents. Here, we show the results of an investigation of the electron dose-controlled formation, growth, and assembly of nanoclusters and nanoparticles in a molecularly assembled thin film of Au(I)–thiolate motifs on a substrate, highlighting an in situ monitoring of the evolution of morphology under controlled electron dose. With aurophilic motifs of Au(I)–thiolate being confined by electrostatic interactions, the sizes of Au nanoclusters and nanoparticles were shown to increase with electron dose, revealing a propensity of a string alignment of the grown nanoclusters and nanoparticles. This growth preference to onedimensional assembly is supported by the analysis of the surface reaction kinetics in terms of the surface density of electron dose for the growth of the nanoclusters and nanoparticles. Here, the electron dose-controlled size-focusing and directional assembly of nanoclusters and nanoparticles may be exploited as new strategy for the precise control of nanoclusters or nanoparticles and their assemblies on solid surfaces not only free from chemical reducing agent but also with the ability of visual monitoring of the morphological evolution during growth.

36 MATERIALS SCIENCE↗

Effect of fluorocarbon self-assembled monolayer films on sidewall adhesion and friction of surface micromachines with impacting and sliding contact interfaces

A self-assembled monolayer film consisting of fluoro-octyltrichlorosilane (FOTS) was vapor-phase deposited on Si(100) substrates and polycrystalline silicon (polysilicon) surface micromachines. The hydrophobic behavior and structural composition of the FOTS film deposited on Si(100) were investigated by goniometry and X-ray photoelectron spectroscopy, respectively. The effects of contact pressure, relative humidity, temperature, and impact/sliding cycles on the adhesive and friction behavior of uncoated and FOTS-coated polysilicon micromachines (referred to as the Si and FOTS/Si micromachines, respectively) were investigated under controlled loading and environmental conditions. FOTS/Si micromachines demonstrated much lower and stable adhesion than Si micromachines due to the highly hydrophobic and conformal FOTS film. Contrary to Si micromachines, sidewall adhesion of FOTS/Si micromachines demonstrated a weak dependence on relative humidity, temperature, and impact cycles. In addition, FOTS/Si micromachines showed low and stable adhesion and low static friction for significantly more sliding cycles than Si micromachines. The adhesive and static friction characteristics of Si and FOTS/Si micromachines are interpreted in the context of physicochemical surface changes, resulting in the increase of the real area of contact and a hydrophobic-to-hydrophilic transition of the surface chemical characteristics caused by nanoscale surface smoothening and the removal of the organic residue (Si micromachines) or the FOTS film (FOTS/Si micromachines) during repetitive impact and oscillatory sliding of the sidewall surfaces.

36 MATERIALS SCIENCE↗

Formation of self-assembled gold nanoparticle supercrystals with facet-dependent surface plasmonic coupling

Metallic nanoparticles, such as gold and silver nanoparticles, can self-assemble into highly ordered arrays known as supercrystals for potential applications in areas such as optics, electronics, and sensor platforms. Here we report the formation of self-assembled 3D faceted gold nanoparticle supercrystals with controlled nanoparticle packing and unique facet-dependent optical property by using a binary solvent diffusion method. The nanoparticle packing structures from specific facets of the supercrystals are characterized by small/wide-angle X-ray scattering for detailed reconstruction of nanoparticle translation and shape orientation from mesometric to atomic levels within the supercrystals. We discover that the binary diffusion results in hexagonal close packed supercrystals whose size and quality are determined by initial nanoparticle concentration and diffusion speed. The supercrystal solids display unique facet-dependent surface plasmonic and surface-enhanced Raman characteristics. The ease of the growth of large supercrystal solids facilitates essential correlation between structure and property of nanoparticle solids for practical integrations.

36 MATERIALS SCIENCE↗

Exploring the Effect of Surface Functionality on the Self-Assembly of Polyoxopalladate Macroions

The solution behavior of the two polyoxo-13-palladates(II) ([Pd(II) 13 As(V) 8 O34 (OH)6 ](8-) and [Pd(II) 13 (As(V) Ph)8 O32 ](6-) ) was studied in detail. We discovered that the countercation-mediated attraction is the driving force for their self-assembly into larger architectures. However, the presence of phenyl groups in the periphery of [Pd(II) 13 (As(V) Ph)8 O32 ](6-) results in an enhanced attraction among these polyanions through hydrophobic interactions, which leads to completely different trends of assembly size for these two very similar clusters when decreasing solvent polarity. An increase of assembly size with increasing solvent polarity was observed for [Pd(II) 13 (As(V) Ph)8 O32 ](6-) , whereas for [Pd(II) 13 As (V) 8 O34 (OH)6 ](8-) it was the opposite, due to the absence of hydrophobic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗