Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface deposition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

(abstract) Optical Scattering and Surface Microroughness of Ion Beam Deposited Au and Pt Thin Films

Thin films of gold and platinum have been deposited onto superpolished fused silica substrates using thermal evaporation, ion assisted deposition (IAD), and ion assisted sputtering. The influence of ion beam flux, thin film material, and deposition rate on the films microroughness have been investigated. Short range surface microroughness of the films has been examined using scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Long range surface microroughness has been characterized using an angle resolved optical scatterometer. Results indicate that ion beam deposited coatings have improved microstructure over thermally evaporated films.

assisted sputtering fused silica ion beam microrou↗
NASA NTRS1992

Molecular films associated with LDEF

The molecular films deposited on the surface of the Long Duration Exposure Facility (LDEF) originated from the paints and room-temperature-vulcanized (RTV) silicone materials intentionally used on the satellite and not from residual contaminants. The high silicone content of most of the films and the uniformity of the films indicates a homogenization process in the molecular deposition and suggests a chemically most favored composition for the final film. The deposition on interior surfaces and vents indicated multiple bounce trajectories or repeated deposition-reemission cycles. Exterior surface deposits indicated a significant return flux. Ultraviolet light exposure was required to fix the deposited film as is indicated by the distribution of the films on interior surfaces and the thickness of films at the vent locations. Thermal conditions at the time of exposure to ultraviolet light seems to be an important factor in the thickness of the deposit. Sunrise facing (ram direction) surfaces always had the thicker film. These were the coldest surfaces at the time of their exposure to ultraviolet light. The films have a layered structure suggesting cyclic deposition. As many as 34 distinct layers were seen in the films. The cyclic nature of the deposition and the chemical uniformity of the film one layer to the next suggest an early deposition of the films though there is evidence for the deposition of molecular films throughout the nearly six year exposure of the satellite. A final 'spray' of an organic material associated with water soluble salts occurred very late in the mission. This may have been the result of one of the shuttle dump activities.

Crutcher, E. R.↗
NASA NTRS1984

Investigation of silicon surface passivation by silicon nitride film deposition

The use of Sin sub x grown by plasma enhanced chemical vapor deposition (PECVO) for passivating silicon surfaces was studied. The application of PECVO SiN sub x films for passivations of silicon N+/P or P+/N solar cells is of particular interest. This program has involved the following areas of investigation: (1) Establishment of PECVO system and development of procedures for growth of SiN sub x; (2) Optical characterization of SiN sub x films; (3) Characterization of the SiN sub x/Si interface; (4) Surface recombination velocity deduced from photoresponse; (5) Current-Voltage analyses of silicon N+/P cells; and (6) Gated diode device studies.

Olsen, L. C.↗
DOE OSTI2022

Development of Surface Sampling Techniques for the Canister Deposition Field Demonstration (FY22 Update)

This report describes the proposed surface sampling techniques and plan for the multi-year Canister Deposition Field Demonstration (CDFD). The CDFD is primarily a dust deposition test that will use three commercial 32PTH2 NUHOMS welded stainless steel storage canisters in Advanced Horizontal Storage Modules, with planned exposure testing for up to 10 years at an operating ISFSI site. One canister will be left at ambient condition, unheated; the other two will have heaters to achieve canister surface temperatures that match, to the degree possible, spent nuclear fuel (SNF) loaded canisters with heat loads of 10 kW and 40 kW. Surface sampling campaigns for dust analysis will take place on a yearly or bi-yearly basis. The goal of the planned dust sampling and analysis is to determine important environmental parameters that impact the potential occurrence of stress corrosion cracking on SNF dry storage canisters. Specifically, measured dust deposition rates and deposited particle sizes will improve parameterization of dust deposition models employed to predict the potential occurrence and timing of stress corrosion cracks on the stainless steel SNF canisters. The size, morphology, and composition of the deposited dust and salt particles will be quantified, as well as the soluble salt load per unit area and the rate of deposition, as a function of canister surface temperature, location, time, and orientation. Previously, a preliminary sampling plan was developed, identifying possible sampling locations on the canister surfaces and sampling intervals; possible sampling methods were also described. Further development of the sampling plan has commenced through three different tasks. First, canister surface roughness, a potentially important parameter for air flow and dust deposition, was characterized at several locations on one of the test canisters. Second, corrosion testing to evaluate the potential lifetime and aging of thermocouple wires, spot welds, and attachments was initiated. Third, hand sampling protocols were developed, and initial testing was carried out. The results of those efforts are presented in this report. The information obtained from the CDFD will be critical for ongoing efforts to develop a detailed understanding of the potential for stress corrosion cracking of SNF dry storage canisters.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1993

Photoluminescence intensity enhancement of GaAs by vapor-deposited GaS - A rational approach to surface passivation

A two order-of-magnitude enhancement of photoluminescence intensity relative to untreated GaAs has been observed for GaAs surfaces coated with chemical vapor-deposited GaS. The increase in photoluminescence intensity can be viewed as an effective reduction in surface recombination velocity and/or band bending. The gallium cluster (/t-Bu/GaS)4 was used as a single-source precursor for the deposition of GaS thin films. The cubane core of the structurally-characterized precursor is retained in the deposited film producing a cubic phase. Furthermore, a near-epitaxial growth is observed for the GaS passivating layer. Films were characterized by transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron and Rutherford backscattering spectroscopies.

Jenkins, Phillip P.↗
NASA NTRS1985

Pressure Relief Valve

"Sputtering" is the process of applying film-like metal coatings onto a surface by bombarding the coating material with electrocharged ions. This causes the material to disintegrate and relocate on the substrate an atom layer at a time. The process allows a variety of coating materials to be deposited on various surfaces. Deposition Technology, Inc. (DTI) uses "sputtering" for window films, packaging materials, etc. Valves installed on two vacuum chambers which are part of DTI's system, were developed by Lewis Research Center and detailed in Tech Briefs. The valve protects the environment and frees the operator from monitoring the chamber venting.

Source record↗
DOE OSTI2022

Modification of LiMn 2 O 4 surfaces by controlling the Acid–Base surface chemistry of atomic layer deposition

In this combined theoretical and experimental study, we report the effects of Al precursor selection on the growth chemistry, interfacial structure, and electrochemistry of Al 2 O 3 coatings on spinel LiMn 2 O 4 (LMO) surfaces by atomic layer deposition (ALD). Five Al precursors, exhibiting a range of Lewis acid-base properties, were used to establish trends in the ALD Al 2 O 3 growth chemistry on LMO powders in comparison to redox-inactive planar silicon substrates. We show that the Lewis acid-base properties of the Al precursor ligands can be used to tune both the Mn oxidation states and the Al 2 O 3 coverage on the LMO surface. Density functional theory calculations are used to examine the reaction mechanism of each precursor on LMO surfaces, elucidating a correlation between the Lewis acidity of the ligands and the decomposition thermochemistry. In-depth X-ray photoelectron spectroscopy and in situ Fourier transform infrared spectroscopy measurements support these theoretical predictions and further reveal how different Al precursors modify the atomic and electronic structure near the LMO surface during ALD. While the Mn oxidation state is strongly influenced by the Lewis acidity of the precursor ligand, the surface coverage and thickness of the Al 2 O 3 coating are a more representative descriptor of the electrochemical performance measured in coin cell experiments. Finally, we show how the ligand acid-base properties of ALD precursors can be used to rationally tailor atomic layer growth mechanisms, which may enable atomic level control over the structure of functionalized interfaces for various applications related to catalysis, semiconductors, and energy storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2018

Linking Improvements in Sulfur Dioxide Emissions to Decreasing Sulfate Wet Deposition by Combining Satellite and Surface Observations with Trajectory Analysis

Sulfur dioxide (SO2), a criteria pollutant, and sulfate (SO42) deposition are major environmental concerns in the eastern U.S. and both have been on the decline for two decades. In this study, we use satellite column SO2 data from the Ozone Monitoring Instrument (OMI), and SO42 wet deposition data from the NADP (National Atmospheric Deposition Program) to investigate the temporal and spatial relationship between trends in SO2 emissions and the downward sulfate wet deposition over the eastern U.S. from 2005 to 2015. To establish the relationship between SO2 emission sources and receptor sites, we conducted a Potential Source Contribution Function (PSCF) analysis using HYSPLIT back trajectories for five selected Air Quality System (AQS) sites - (Hackney, OH, Akron, OH, South Fayette, PA, Wilmington, DE, and Beltsville, MD) - in close proximity to NADP sites with large downward SO42 trends since 2005. Back trajectories were run for three summers (JJA) and three winters (DJF) and used to generate seasonal climatology PSCFs for each site. The OMI SO2 and interpolated NADP sulfate deposition trends were normalized and overlapped with the PSCF, to identify the areas that had the highest contribution to the observed drop. The results suggest that emission reductions along the Ohio River Valley have led to decreases in sulfate deposition in eastern OH and western PA (Hackney, Akron and South Fayette). Farther to the east, emission reductions in southeast PA resulted in improvements in sulfate deposition at Wilmington, DE, while for Beltsville, reductions in both the Ohio River Valley and nearby favorably impacted sulfate deposition. For Beltsville, sources closer than 300km from the site contribute roughly 56% observed deposition trends in winter, and 82% in summer, reflecting seasonal changes in transport pattern as well as faster oxidation and washout of sulfur in summer. This suggests that emissions and wet deposition are linked through not only the location of sources relative to the observing sites, but also to photochemistry and the weather patterns characteristic to the region, as evidenced by a west to east shift in the contribution between winter and summer. The method developed here is applicable to other regions with significant trends such as China and India, and can be used to estimate the potential benefits of emission reduction in those areas.

Acid depostion↗
NASA NTRS2018

Linking Improvements in Sulfur Dioxide Emissions to Decreasing Sulfate Wet Deposition By Combining Satellite and Surface Observations With Trajectory Analysis

Sulfur dioxide (SO2), a criteria pollutant, and sulfate (SO42−) deposition are major environmental concerns in the eastern U.S. and both have been on the decline for two decades. In this study, we use satellite column SO2 data from the Ozone Monitoring Instrument (OMI), and SO42− wet deposition data from the NADP (National Atmospheric Deposition Program) to investigate the temporal and spatial relationship between trends in SO2 emissions and the downward sulfate wet deposition over the eastern U.S. from 2005 to 2015. To establish the relationship between SO2 emission sources and receptor sites, we conducted a Potential Source Contribution Function (PSCF) analysis using HYSPLIT back trajectories for five selected Air Quality System (AQS) sites - (Hackney, OH, Akron, OH, South Fayette, PA, Wilmington, DE, and Beltsville, MD) - in close proximity to NADP sites with large downward SO42− trends since 2005. Back trajectories were run for three summers (JJA) and three winters (DJF) and used to generate seasonal climatology PSCFs for each site. The OMI SO2 and interpolated NADP sulfate deposition trends were normalized and overlapped with the PSCF, to identify the areas that had the highest contribution to the observed drop. The results suggest that emission reductions along the Ohio River Valley have led to decreases in sulfate deposition in eastern OH and western PA (Hackney, Akron and South Fayette). Farther to the east, emission reductions in southeast PA resulted in improvements in sulfate deposition at Wilmington, DE, while for Beltsville, reductions in both the Ohio River Valley and nearby favorably impacted sulfate deposition. For Beltsville, sources closer than 300 km from the site contribute roughly 56% observed deposition trends in winter, and 82% in summer, reflecting seasonal changes in transport pattern as well as faster oxidation and washout of sulfur in summer. This suggests that emissions and wet deposition are linked through not only the location of sources relative to the observing sites, but also to photochemistry and the weather patterns characteristic to the region, as evidenced by a west to east shift in the contribution between winter and summer. The method developed here is applicable to other regions with significant trends such as China and India, and can be used to estimate the potential benefits of emission reduction in those areas.

sulfur dioxide emissions↗
NASA NTRS1992

The distribution of anorthosite on the nearside of the moon

Remote sensing studies of lunar basin and crater deposits were conducted in order to determine the composition of surface units and to investigate the stratigraphy of the lunar crust. These studies have combined both visible and near-IR spectral observations with multispectral imaging in order to determine the lithology of relatively small portions (2-10 km) of the lunar surface. Numerous deposits of pure anorthosite (plagioclase greater than 90 percent) were identified and an interesting pattern has emerged. The purposes of this report are as follows: (1) to summarize the results of our previous studies of the distribution of anorthosite; (2)to present new findings concerning the modes of occurrence of lunar anorthosite; and (3) to assess the implication for the magma ocean hypothesis.

Hawke, B. R.↗
DOE OSTI2021

The Role of Titania Surface Coating by Atomic Layer Deposition in Improving Osteogenic Differentiation and Hard Tissue Formation of Dental Pulp Stem Cells

Recent studies have focused on modifying implant surface properties to improve bone regeneration and osseointegration. Herein, the role of titania surface coating in enabling dental pulp stem cells (DPSCs) differentiation and hard tissue formation is studied. Atomic layer deposition is applied at lower temperature to coat a nanolayer of titania onto hard and soft polybutadiene substrates without altering their moduli, to probe the effects of surface chemistry and substrate modulus. In the absence of titania, DPSCs prefer to attach and proliferate on the hard substrate, where particle-like biomineralization is present after 28 days in culture, whereas no biomineralization is observed on the soft substrate. Applying titania surface coating results in the improvement of adhesion and proliferation, regardless of substrate modulus, whereas cell and substrate moduli remain the same as control without titania coating. Furthermore, templated biomineralization is observed given the bone-like tissue composition by Raman analysis, in consistent with real time-polymerase chain reaction (RT-PCR) results showing upregulation of osteopontin (OPN) and bone sialoprotein (BSP), representing osteogenic differentiation. Furthermore, the results indicate that titania surface coating improved the ability to nucleate banded collagen fibers which in turn templated mineral deposits, and further induced the osteogenesis of DPSCs, regardless of its substrate modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Sodium–Antimony–Telluride Intermetallic Allows Sodium-Metal Cycling at 100% Depth of Discharge and as an Anode-Free Metal Battery

In this work, repeated cold rolling and folding is employed to fabricate a metallurgical composite of sodium–antimony–telluride Na 2 (Sb 2/6 Te 3/6 Vac 1/6 ) dispersed in electrochemically active sodium metal, termed “NST-Na.” This new intermetallic has a vacancy-rich thermodynamically stable face-centered-cubic structure and enables state-of-the-art electrochemical performance in widely employed carbonate and ether electrolytes. NST-Na achieves 100% depth-of-discharge (DOD) in 1 m NaPF 6 in G2, with 15 mAh cm –2 at 1 mA cm –2 and Coulombic efficiency (CE) of 99.4%, for 1000 h of plating/stripping. Sodium-metal batteries (SMBs) with NST-Na and Na 3 V 2 (PO 4 ) 3 (NVP) or sulfur cathodes give significantly improved energy, cycling, and CE (>99%). An anode-free battery with NST collector and NVP obtains 0.23% capacity decay per cycle. Imaging and tomography using conventional and cryogenic microscopy (Cryo-EM) indicate that the sodium metal fills the open space inside the self-supporting sodiophilic NST skeleton, resulting in dense (pore-free and solid electrolyte interphase (SEI)-free) metal deposits with flat surfaces. The baseline Na deposit consists of filament-like dendrites and “dead metal”, intermixed with pores and SEI. Density functional theory calculations show that the uniqueness of NST lies in the thermodynamic stability of the Na atoms (rather than clusters) on its surface that leads to planar wetting, and in its own stability that prevents decomposition during cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

CRADA Number NFE-21-08827 with DayLyte, Inc. (CRADA Final Report)

DayLyte Batteries is developing an aqueous Sodium-Air battery made with abundant materials while being half to a third the weight of Li-ion to power electric aircraft, electric vehicles and provide renewable energy on demand. To make this battery practical, DayLyte is developing a thin film ceramic Nasicon solid electrolyte amenable to rapid scaleup as well as a protective coating that will protect the solid electrolyte from 50wt% NaOH during the battery’s end-of-discharge while still allowing Na-ions to pass back and forth. If the thin film solid electrolyte and stable coating can be developed it will open the world to step change in battery performance all while not sacrificing the environment on the way. The project was designed to first focus on making and characterizing the Nasicon membrane followed by measuring its electrochemical performance, then assembling a full cell, optimizing its NaOH stability and then optimize the overall prototype design. Over the past two years, we have significantly improved the Nasicon film uniformity, demonstrated protective ligands that are stable in 50wt% NaOH by measuring no mass change with a quartz crystal microbalance, tested different heating methods like tube furnace and rapid heating and developed glassy carbon coatings on the current collector to prevent Nasicon-current collector alloying. We have found that getting film uniformity as measured by electrochemical impedance spectroscopy (EIS) is difficult because of different factors like surface roughness, deposition uniformity and heat treatment time and uniformity. The glassy carbon coating should significantly reduce the surface roughness and by tuning the coating conditions the film deposition uniformity improves and using an automated heating method should lead to much improved film uniformity.

25 ENERGY STORAGE↗
DOE OSTI2024

Characterization of spent nuclear fuel canister surface roughness using surface replicating molds

In this study we present a replication method to determine surface roughness and to identify surface features when a sample cannot be directly analyzed by conventional techniques. As a demonstration, this method was applied to an unused spent nuclear fuel dry storage canister to determine variation across different surface features. In this study, an initial material down-selection was performed to determine the best molding agent and determined that non-modified Polytek PlatSil23-75 provided the most accurate representation of the surface while providing good usability. Other materials that were considered include Polygel Brush-On 35 polyurethane rubber (with and without Pol-ease 2300 release agent), Polytek PlatSil73-25 silicone rubber (with and without PlatThix thickening agent and Pol-ease 2300 release agent), and Express STD vinylpolysiloxane impression putty. The ability of PlatSil73-25 to create an accurate surface replica was evaluated by creating surface molds of several locations on surface roughness standards representing ISO grade surfaces N 3 , N 5 , N 7 , and N 8 . Overall, the molds were able to accurately reproduce the expected roughness average (R a ) values, but systematically over-estimated the peak-valley maximum roughness (R z ) values. Using a 3D printed sample cell, several locations across the stainless steel spent nuclear fuel canister were sampled to determine the surface roughness. These measurements provided information regarding variability in normal surface roughness across the canister as well as a detailed evaluation on specific surface features (e.g., welds, grind marks, etc.). The results of these measurements can support development of dry storage canister ageing management programs, as surface roughness is an important factor for surface dust deposition and accumulation. This method can be applied more broadly to different surfaces beyond stainless steel to provide rapid, accurate surface replications for analytical evaluation by profilometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Estimated timescales for wet deposition of organic compounds as a function of Henry's law constants

Atmospheric organic compounds may deposit to Earth's surfaces via dry deposition, driven by concentration gradients, and wet deposition, driven by the scavenging of compounds by precipitation. Their removal by deposition has downstream impacts on concentrations of secondary organic aerosol by removing potential aerosol precursors that would otherwise oxidize to form particulate matter. The impact of deposition processes can consequently be considered as competition between rates of oxidation and deposition, but timescales for deposition are not well constrained. While timescales for dry deposition have been estimated and experimentally validated in the past, understanding of wet deposition of organics is still very limited. In this work, we estimate the wet deposition timescale for gas-phase organic compounds in the atmosphere as a function of Henry's law constants, H, using real-world precipitation frequency and size distributions at five globally-distributed sites. The wet deposition timescale decreases significantly with the increase of H until reaching a stable minimum for compounds with H > 10 5 M per atm. We estimate that the median wet deposition timescale for highly soluble gases is approximately 5 hours during a continuous rain event for all sites. However, median estimated timescales ranged from 80 to 200 hours, depending on location. Timescales are found to depend primarily on the frequency and duration of precipitation events rather than their intensity or size characteristics. Based on these data, we demonstrate that timescales for wet deposition of gases can be estimated at any given location using only basic precipitation information, without detailed or high-precision measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Optimizing protic ionic liquid electrolyte for pre-intercalated Ti 3 C 2 T x MXene supercapacitor electrodes

Electrical double-layer capacitors (EDLCs) are of increasing importance in energy storage from renewable sources. The properties of the electrode and electrolyte materials influence the energy and power densities of EDLCs. We examined the specific capacitance and ion dynamics of a protic ionic liquid confined in pre-intercalated Ti 3 C 2 T x MXene. Our electrochemical measurements demonstrated that the creation of a protic ionic liquid, 1-butyl-3-H-imidazolium bis(trifluoromethanesulfonyl)imide (BuIMH-NTf2), using a mixture of ionic liquid, 1-butyl imidazole (BuIM), and salt, bis(trifluoromethanesulfonyl)imide (HNTf2), in a ratio of 0.8:0.2 led to the optimal capacitance. Remarkably, quasi-elastic neutron scattering measurements revealed increased particle mobility at this composition, attributed to the more efficient accumulation of BuIMH + on the electrode surface. This deposit of additional ions results in fewer BuIM molecules away from the surface, enhancing their mobility due to reduced crowding. This composition-dependent electrochemical behavior will guide the formulation of more efficient protic ionic liquid systems, enabling faster ion transport in energy storage devices.

36 MATERIALS SCIENCE↗