Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Calculated ground state potential surface and excitation energies for the copper trimer

In the context of their relevance to catalysis and to materials science problems, transition metals and transition metal (TM) compounds are currently of considerable interest, and studies have been conducted of the copper trimer, Cu3. The present investigation is concerned with a study of the ground state surface and several groups of excited states in order to improve the understanding of the spectroscopy of Cu3. Differences of the current study from previous investigations are related to an employment of larger basis sets and a more extensive electron correlation. This was done with the objective to obtain a more accurate definition of the ground state surface. Features of the bonding in the copper dimer are considered to obtain a basis for an understanding of the copper trimer. Attention is given to calculational details, the ground state surface, and calculated vertical excitation energies. The results of SCF/SDCI calculations are reported for portions of the ground surface, for two groups of excited states, and for the ionization potential of Cu3.

Walch, S. P.↗
NASA NTRS1991

Preliminary assessment of Termoskan observations of Mars

The limited set of high-resolution observations of the 8-12 micron thermal emission from Mars' equatorial regions by the Termoskan instrument onboard the Phobos '88 spacecraft in February and March of 1989 is considered. Observations were also simultaneously acquired in the 0.5 to 1.0 micron region. A combined U.S. and Soviet scientific team made a preliminary quantitative evaluation of about 25 percent of the entire data set. It is found that there is a close agreement with the Viking Infrared Thermal Mapper brightness temperatures, confirming the accuracy of the Termoskan system and calibration. A novel pattern of emission from particles was observed in the morning and assumed to be water or ice. Thermal emission from surface features is varied and distinct down to the limit of resolution. The presence of unusually insulating material has been detected in the uppermost fraction of a millimeter of the Martian surface in places where the shadow of Phobos briefly eclipsed by the surface.

Murray, B.↗
NASA NTRS2005

Astrobiological and Geological Implications of Convective Transport in Icy Outer Planet Satellites

The oceans of large icy outer planet satellites are prime targets in the search for extraterrestrial life in our solar system. The goal of our project has been to develop models of ice convection in order to understand convection as an astrobiologically relevant transport mechanism within icy satellites, especially Europa. These models provide valuable constraints on modes of surface deformation and thus the implications of satellite surface geology for astrobiology, and for planetary protection. Over the term of this project, significant progress has been made in three areas: (1) the initiation of convection in large icy satellites, which we find probably requires tidal heating; (2) the relationship of surface features on Europa to internal ice convection, including the likely role of low-melting-temperature impurities; and (3) the effectiveness of convection as an agent of icy satellite surface-ocean material exchange, which seems most plausible if tidal heating, compositional buoyancy, and solid-state convection work in combination. Descriptions of associated publications include: 3 published papers (including contributions to 1 review chapter), 1 manuscript in revision, 1 manuscript in preparation (currently being completed under separate funding), and 1 published popular article. A myriad of conference abstracts have also been published, and only those from the past year are listed.

Pappalardo, Robert T.↗
NASA NTRSDate not supplied

MAB Phase Ceramics for Lunar Applications

During the ten-week internship my work focused on designing characterization protocol for 3D printed MAB phase ceramics on steel and Tiplates. I was mentored by Dr. Samuel Hocker of NASA and advised by Dr. Gupta from University of North Dakota. I also collaborated with Mackenzie Short from the University of North Dakota. The characterization protocol was divided into following steps; initially, we performed visual inspection of the plates. During this process, the coatings which spalled or delaminated were discarded for further evaluation. During the next step, we performed optical microscopy to discern and document surface features and porosities of the samples. We also noted some decomposition under the optical microscope as well. Thereafter, profilometry analysis was performed to understand the effect of power density on the surface roughness. Due to the deposited powder over the samples, the profilometry was inconclusive. We then cleaned the samples on the steel plate using ethanol and cotton swabs to wipe up the loose powder covering the samples. Detailed SEM analysis was then performed on the cleaned specimens. In parallel, the 3D printed samples on the Tiplate were cleaned by using an ultrasonic bath for 1h. Optical imaging showed that this cleaning process was more effective for cleaning except that small cracks propagated through the layered ceramics. The profilometry data gathered on the titanium plate after cleaning was more conclusive. The SEM data on the steel plate showed that there is decomposition at all wattages although at 100 W the extent of decomposition was lower. We are planning to characterize the steel samples after cleaning in ultrasonic bath for 5-10 min to minimize cracking during the cleaning process. In addition, we are also planning to study the fractured surface by SEM analysis.

Additive Manufacturing, Laser Powder Bed Fusion, S↗
NASA NTRS1978

Mare volcanism in the Herigonius region of the moon

The paper considers the area in the vicinity of the crater Herigonius. This area contains numerous sinuous rilles, craters with irregular planimetric form, possible pyroclastic cones, and other features of probable volcanic origin, and appears to be the vent region that supplied lavas both northward to Oceanus Procellarum and southward to the Humorum basin. The approach used involves photogeologic interpretation of surface features and mapping of mare units to derive a regional stratigraphic sequence. The sequence of mare volcanism provides insight into the complex emplacement of lunar lavas and the general volcanic history of the moon.

Greeley, R.↗
NASA NTRS1982

A study of the nature of solid particle impact and shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possibility of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗
NASA NTRS1983

An investigation of adhesive/adherend and fiber/matrix interactions. Part B: SEM/ESCA analysis of fracture surfaces

Adhesion was studied with emphasis on the characterization of surface oxide layers, the analysis of fracture surfaces, and the interaction of matrices and fibers. A number of surface features of the fractured lap shear samples were noted in the SEM photomicrographs including the beta phase alloy of the Ti 6-4 adherend, the imprint of the adherend on the adhesive failure surface, increased void density for high temperature samples, and the alumina filler particles. Interfacial failure of some of the fractured lap shear samples is invariably characterized by the appearance of an ESCA oxygen photopeak at 530.3 eV assigned to the surface oxide layer of Ti 6-4 adherend. The effect of grit blasting on carbon fiber composites is evident in the SEM analysis. A high surface fluorine concentration on the composite surface is reduced some ten fold by grit blasting.

Beck, B.↗
NASA NTRS1984

A study of the effect of solid particle impact and particle shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possiblity of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗
NASA NTRS1973

Evaluate the application of ERTS-A data for detecting and mapping sea ice

The author has identified the following significant results. Generally good agreement has been observed between the location of ice edges and ice concentrations as indicated on aerial observation charts and as mapped from ERTS-1 imagery. Moreover, ice surface features reported to be ridges and thaw holes are readily detected in the ERTS-1 imagery. Reported hummocks, puddles, frozen puddles, and rafted ice are not as readily detected in the imagery, although brightness variations on some ice surfaces can be distinguished, thereby suggesting their presence. In the ERTS-1 imagery, although dark new ice and nilas are difficult to detect, other younger forms of ice can be mapped and can usually be distinguished from older ice because of their lower, more uniform reflectance. A preliminary examination of the initial sample of ERTS-1 imagery collected during the spring, during the season of maximum ice extend, indicates several ice features of interest. Compact pack ice can be distinguished from coastal fast ice, and many leads can be mapped, even in the mid-Beaufort Sea. Several leads have distinct variation in reflectance.

Barnes, J. C.↗
NASA NTRS1983

Albedo asymmetry of Iapetus

Observational data for Iapetus and other Saturn moons are used to show that the dark areas on Iapetus feature organic chromophores caused by UV irradiation of CH4-rich ice. The Iapetus albedo pattern, brighter at the poles and in the trailing hemisphere, is suggested to originate from ballistic impact redistribution of surface material in terms of an impact flux gradient. The orange/violet color ratios from Voyager imagery were measured as 1.46 for the leading hemisphere and 1.24 for the trailing hemisphere. The evolution of the Iapetus regolith during processes of ice evaporation, impact ablation, material transport, and chemical alteration is discussed for factors causing the albedo asymmetry. Comparisons of surface features of Titan, Oberon,, and Hyperion with those of Iapetus indicate a balance may exist between UV photochemistry and ablation on Iapetus, with the impact gradient having been determined by the tidally locked revolution of the moon. Voyager 2 data on the uranian moons are expected to offer confirmation or denial of the model.

Squyres, S. W.↗
NASA NTRS1987

The geology of Pine and Crater Buttes: Two basaltic constructs on the far eastern Snake River Plain

The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets.

Mazierski, Paul F.↗
NASA NTRS1999

Vertical Structure in Outer Planet Atmospheres

The period covered by this cooperative agreement included: 1) the analysis of data acquired by both Voyager spacecraft during their encounters with Saturn in 1979 and 1980; 2) work on Uranus' seasonal variability and transient albedo features on both Uranus and Neptune using observations made by the Hubble Space Telescope beginning in 2000; 3) a search for lightning on Jupiter using HST; and 4) the analysis of Pathfinder images of Martian surface features.

Rages, Kathy A.↗
NASA NTRS1974

Surface geology of the moon

Questions regarding the formation of major lunar surface features are discussed, giving attention to the multiringed circular basins, the craters, and the mare material. Aspects of lunar stratigraphy are explored. At the present time, a lunar-wide time-stratigraphic sequence exists, in which surface units belong to one of a number of systems, including the Copernican, the Eratosthenian, Imbrian, Nectarian, and pre-Nectarian system. Details of Apollo surface exploration as conducted in each individual mission are considered along with the chemistry and the age of lunar materials, the lunar interior, and the evolution of the lunar surface.

El-Baz, F.↗
NASA NTRS1978

Computed and observed ocean topography - A comparison

The Goddard Space Flight Center's latest Gravity Earth Model, GEM-8, was used to construct a static sea surface. Such a surface corresponds to the surface of an ocean without the time-varying effects of atmospheric pressure, surface wind friction, tides, and currents. It conforms to a surface dictated by the earth's gravitational and rotational forces. The sea surface model is the result of analyzing more than 500,000 satellite observations together with about 1600 5 deg x 5 deg and about 38,000 1 deg x 1 deg surface gravity anomalies. Preliminary comparisons between the computed and measured sea surface topography indicate that they agree quite well and differ by less than 1 m in many places including the Atlantic test area. Sea-surface features such as undulations caused by trenches and ridges are clearly and accurately detectable. The use of altimeter data for orbit computation reduces the uncertainty of the spacecraft height and thus the errors of the sea-surface topography.

Vonbun, F. O.↗
NASA NTRS2001

Three-Dimensional Simulations of Mantle Convection in Io

Io has very high surface heat flow and an abundance of volcanic activity, which are thought to be driven by nonuniform tidal heating in its interior. This nonuniform heat is transported to the base of the lithosphere by very vigorous convection in Io's silicate mantle, the form of which is presumably responsible for the distribution of surface features such as volcanoes and mountains. We here present three-dimensional spherical calculations of mantle convection in Io, in order to ascertain the likely form of this convection and the resulting distribution of heat flow at the surface and core-mantle boundary. Different models of tidal dissipation are considered: the endmember scenarios (identified by M. N. Ross and G. Schubert) of dissipation in the entire mantle, or dissipation in a thin (approximately 100-km-thick) asthenosphere, as well as the 'preferred' distribution of M. N. Ross et al. comprising 1/3 mantle and 2/3 asthenosphere heating. The thermal structure of Io's mantle and asthenosphere is found to be strongly dependent on tidal heating mode, as well as whether the mantle-asthenosphere boundary is permeable or impermeable. Results indicate a large-scale flow pattern dominated by the distribution of tidal heating, with superimposed small-scale asthenospheric instabilities that become more pronounced with increasing Rayleigh number. These small-scale instabilities spread out the surface heat flux, resulting in smaller heat flux variations with increasing Rayleigh number. Scaled to Io's Rayleigh number of O(10(exp 12)) variations of order a few percent are expected. This small but significant variation in surface heat flux may be compatible with the observed distributions of volcanic centers and mountains, which appear fairly uniform at first sight but display a discernible distribution when suitably processed. The observed distribution of volcanic centers is similar to the asthenosphere heating distribution, implying that most of the tidal heating in Io occurs in an asthenosphere.

Tackley, Paul J.↗
NASA NTRS1979

Preliminary results of SAR soil moisture experiment, November 1975

The experiment was performed using the Environmental Research Institute of Michigan's (ERIM) dual-frequency and dual-polarization side-looking SAR system on board a C-46 aircraft. For each frequency, horizontally polarized pulses were transmitted and both horizontally and vertically polarized return signals were recorded on the signal film simultaneously. The test sites were located in St. Charles, Missouri; Centralia, Missouri; and Lafayette, Indiana. Each test site was a 4.83 km by 8.05 km (3 mile by 5 mile) rectangular strip of terrain. Concurrent with SAR overflight, ground soil samples of 0-to-2.5 cm and 0-to-15 cm layers were collected for soil moisture estimation. The surface features were also noted. Hard-copy image films and the digital data produced via optical processing of the signal films are analyzed in this report to study the relationship of radar backscatter to the moisture content and the surface roughness. Many difficulties associated with processing and analysis of the SAR imagery are noted. In particular, major uncertainty in the quantitative analysis appeared due to the difficulty of quality reproduction of digital data from the signal films.

Choudhury, B. J.↗
NASA NTRS1981

Modeling the terrestrial hydrology for the global atmosphere - The future role of satellite data

A global terrestrial hydrology model has been developed for the transport and storage of moisture and heat in the ground surface layer where the hydrological parameters react to diurnal and seasonal changes in the atmosphere. The spatial and temporal variability of land surface features is considered in the model by means of large scale parameterizations. The model can be either forced by the atmosphere using conventional meteorological data or coupled to an atmospheric general circulation model (GCM) for interactive studies. The global surface is divided into 4 deg longitude by 5 deg latitude cells while the ground is represented by a thin surface layer, a bulk layer (the root zone), and a deep layer (the ground water zone). Results are presented from a seven-day global experiment which was conducted utilizing the GLAS GCM (NASA Goddard Laboratory for Atmospheric Sciences). The model has demonstrated its capability to predict, over a large region, the overall soil moisture storage and major flux exchanges with the atmosphere above and the ground water below.

Lin, J. D.↗
NASA NTRS1981

Earth resources observation with the Shuttle imaging radar

To fully understand the radar signature of different surface features and covers, observations must be made in a variety of sensor parameters (that is, frequency, polarization, and incidence angle). This makes it possible to choose those sensor parameters that will provide the greatest amount of information about the surface. The Shuttle Imaging Radar (SIR) will be able to obtain surface images at two frequencies (L-band and C-band), at multiple polarizations, and at all incidence angles from near vertical to near grazing. The SIR will operate in the synthetic aperture imaging mode and provide digital images of the surfaces with a resolution of approximately 20 m. As part of the SIR flights, a number of planned large-scale experiments will be carried out in the fields of geologic mapping, vegetation classification, land cover mapping, surface moisture measurements, and ocean surface observation.

Elachi, C.↗