Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Erosion of high-Z refractory coatings for helicon plasma source window

Proto-MPEX (Materials Plasma Exposure eXperiment), a linear plasma device (LPD), using a high power radio frequency (RF) (⩾100 kW, 13.56 MHz) helicon plasma source, has suffered RF sheath-induced window erosion. The sputtered impurities from the window surface transport toward the downstream target affecting plasma-material interaction studies. The rectified sheath voltage formed was high enough to cause window erosion by light ions due to its low-Z components (e.g. Si 3 N 4 and AlN). Hence, we are proposing impurity mitigation strategies, which involve the application of a Faraday screen to lower the rectified sheath voltage and the application of high-Z refractory coatings on the existing window plasma-facing surface. In this work, we report the erosion of two different coatings, i.e., tantalum oxide (Ta 2 O 5 ) and hafnium oxide (HfO 2 ) on a silicon nitride (Si 3 N 4 ) window material under conditions of low-energy deuterium (D) ion impact, well below the Ta 2 O 5 sputtering energy threshold (i.e. 250 eV). The test samples were RF-biased and exposed to a high D-ion fluence (∼10 26 m −2 ) in Plasma Interaction with Surface Component Experimental Station (PISCES-A) LPD. The experimentally measured sputtering yields of the high-Z refractory coatings below the sputtering energy threshold of Ta 2 O 5 indicate an increased erosion due to the plasma impurities, especially due to oxygen. Improving the vacuum level could reduce the oxygen impurities and increase the lifespan of the coated helicon window for plasma operation. Post-surface analysis indicates no preferential erosion of oxygen or enrichment of the high-Z surface component. This is likely due to an effective energy transfer from the impurity ion for sputtering of the high-Z component in the coating. With the reduced rectified sheath voltage at the window surface and improved vacuum conditions, the proposed high-Z refractory coatings offer a promising solution for reducing window erosion in future MPEX plasma operations at ORNL.

RF bias↗
DOE OSTI2024

PPI DataHub Project Data Package: High-density Lipoprotein (HDL) Structure and Function Proteomics

The purpose of this experiment was to investigate how the interactions between APOA1 and APOA2 on the surface of high-density lipoproteins (HDL) impact particle function. Interactions were investigated on HDL isolated from human blood plasma using structural proteomics tools such as chemical cross-linking and limited proteolysis (LiP). The structural proteomics data was acquired using a Q-Exactive HF-X mass spectrometer and data was processed and compiled using MaxQuant sofware (v.1.6.17.0). Processed datasets are openly accessible from the download button (~2.8 GB) and contain secondary processed LiP and global proteomic results files and supporting metadata materials. Processed data downloads include a sample naming key, processed MaxQuant results/parameters, and protein annotated relative abundance files.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Coastal-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) Science Plan

Understanding the mechanisms governing the urban atmospheric environment is critical for informing urban populations regarding the impacts of climate change and associated mitigation and adaptation measures. Earth system (climate and weather) models have not yet been adapted to provide accurate predictions of climate and weather variability within cities, nor do they provide well-tested representations of the impacts of urban systems on the atmospheric environment. These limitations are largely due to limited field data available for testing and development of these models. We will deploy the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility’s first Mobile Facility (AMF1) to the mid-Atlantic region surrounding the city of Baltimore for the Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE). This deployment will create a four-node regional atmospheric observatory network including Baltimore and its three primary surrounding environments – rural, urban, and bay. CoURAGE investigators will study the interactions among the Earth’s surface, the atmospheric boundary layer, aerosols and atmospheric composition, clouds, radiation, and precipitation at each site, and examine how the spatial gradients across the region interact to create the climate conditions in Baltimore. This study will determine the degree to which Baltimore’s atmospheric environment depends on interactive feedbacks in the atmospheric system and the degree to which conditions in Baltimore depend on the surrounding environment. Some topics of interest include how urban land management exacerbates heat waves, the impact of regional mesoscale winds (nocturnal jet, bay breeze) on urban air pollution and cloud cover, and the impact of the urban heat island and aerosol production on heavy precipitation events. Understanding this integrated coast-urban-rural system quantitatively and with good accuracy and precision is critical to informing climate adaptation and mitigation efforts in the city of Baltimore. The understanding gained should be applicable to many similar coastal, mid-latitude urban centers. Another important objective of CoURAGE is to improve the representation of the climate of coastal cities in Earth systems models (ESMs). CoURAGE investigators will use the observations to test current ESMs, identify weaknesses and work towards improved simulations of this complex environment. The ARM core facility will be deployed in the city of Baltimore, complementing the Baltimore Social-Environmental Collaborative (BSEC), a DOE urban integrated field laboratory (UIFL). Ancillary sites will be deployed to rural Maryland northwest of Baltimore, and to the southern end of Kent Island within Chesapeake Bay. The fourth node will be a long-term atmospheric observatory operated in Beltsville, Maryland by Howard University and the Maryland Department of the Environment. Measurements will be conducted for one year, starting in December of 2024. There will be two intensive operational periods (IOPs), one in summer and one in winter, when the ancillary sites will be enhanced with additional balloon launches, tethered balloon system (TBS) operation, and added atmospheric composition measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Gating Single Molecules with Counterions

We report atomic-scale gating and visualization of local charge distribution within individual rare-earth-based molecular complexes on a metallic surface. The complexes are formed by a positively charged lanthanum ion coordinated to a (pcam)3 molecule and a negatively charged counterion trapped underneath via electrostatic interactions on a Au(111) surface. Local gating is performed by adding an additional negatively charged counterion to one side of the complex, which results in the redistribution of charges within the complex and a positive shift of the frontier orbitals. This is caused by the internal Stark effect induced by the added counterion. This effect is directly captured using tunneling spectroscopy and spectroscopic mapping at 5 K substrate temperature. The polarizability of the complex is corroborated by density functional theory and analytical calculations based on experimental findings. Furthermore, the influence of charge polarization on nearby complexes is investigated in a cluster purposely assembled using three complexes, which reveals maintaining the charge states as in single complexes. These findings will enable the design of robust charged rare-earth complexes to be tailored for potential solid-state applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Calculation of ion–ion mutual neutralization rate constants using Landau–Zener theory coupled with trajectory simulations for Ar + –Cl − , Br − , I −

In this computational study, we self-consistently calculate the rate constants of mutual neutralization reactions by incorporating the electron transfer probability, using Landau–Zener state transition theory with inputs derived from ab initio quantum chemistry calculations, into classical trajectory simulations. Electronic structure calculations are done using correlation consistent basis sets with multi-reference configuration interaction to map all the molecular electronic states below the ion-dissociation limit as a function of the distance between the reacting species. Our electronic structure calculations have been significantly improved from our previous work through improved selection of molecular electronic configurations maintaining a fine grid of 1a 0 over a wide range of bond lengths and accurate treatment of spin–orbit couplings. Non-adiabatic coupling matrix elements are calculated with the three-point central difference method near each avoided crossing to estimate the exact crossing point R x and coupling parameter H if , which are inputs to the multi-channel Landau–Zener theory to calculate the electron transition probability. Our approach is applied to estimate the mutual neutralization rate constants for the following ion pairs: Ar + –Cl − , Ar + –Br − , Ar + –I − at ∼133 Pa. Furthermore, our predictions are compared against the experimental data reported. It is seen that the improvement in the electronic structure calculation results in excellent agreement between the simulation results and the available experimental data to within a factor of ∼2 or ∼±50%.

Complete-active space self-consistent field↗
DOE OSTI2026

Unravelling chemical pathways of H 2 on Ga 2 O 3 surfaces with spectro-electrochemistry

This work highlights the capability of coupled spectroscopic and electrochemical techniques to probe dynamic surface processes under realistic operating conditions. By simultaneously employing in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and electrochemical impedance spectroscopy (EIS), we elucidate the mechanistic interaction between Ga 2 O 3 and hydrogen under elevated temperatures in a low-oxygen environment. This novel spectro-electrochemical approach allows chemistry to be correlated with the surface charge density of Ga 2 O 3 . Our results reveal a concentration-dependent transition in reaction pathway. At low concentrations, hydrogen reacts with ambient oxygen to form surface hydroxyls. At intermediate concentrations, hydrogen interacts with surface adsorbed oxygen to generate hydroxyl groups along with reducing the surface. Finally, at high H 2 concentrations, hydrogen reduces both hydroxyls and surface oxygen, leading to a highly conductive grain surface. As a result, hydrides form on the reduced Ga 2 O 3 surface. The gained insights are relevant for heterogeneous catalysis and gas sensing.

08 HYDROGEN↗
DOE OSTI2026

Kent Island Boundary Layer Field Campaign Report

Understanding the mechanisms governing the urban atmospheric environment is critical for informing urban populations about the impacts of climate change and associated mitigation and adaptation measures. The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) was conducted to study the interactions among the earth’s surface, the atmospheric boundary layer (ABL), aerosols, atmospheric composition, clouds, radiation, and precipitation at each experimental site, and to examine how the spatial gradients across the region interact to create the climate conditions in Baltimore. In this activity we performed weekly soundings, alternating between day and night from Kent Island, to get low-frequency, long-term observations of ABL/lower tropospheric thermodynamic structure. However, during the CoURAGE intensive operational period (IOP), we performed high-frequency sampling (2x/day), at times coinciding with CoURAGE IOP soundings at the main site. The short-term, high-frequency sounding information that was launched at 12Z and 18Z was to complement the longer-term data set.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Integrated geological, economic, and risk assessment of underground hydrogen storage

Underground hydrogen storage (UHS) is a promising option to buffer variable renewable power and support the hydrogen economy. Yet this technology is early-stage, and key uncertainties remain about how coupled processes such as geochemical and geomechanical impacts affect long-term storage security. In this paper, we seek to integrate the results from a large, multi-scale research program to quantify core feasibility metrics and situate these studies within ongoing efforts. Through this work, we evaluate hydrogen recoverability during storage by assessing diffusive losses, losses to geochemical interactions and their subsequent impact on geomechanical properties, and losses to residual saturation during injection and withdrawal. Molecular and laboratory studies show that lithologic heterogeneity, pore geometry, and mineral surface chemistry govern hydrogen–rock interactions, controlling loss pathways. High-pressure coreflooding is used to estimate relative permeabilities and measure parameters needed for reservoir-scale sensitivity analyses. These core-scale experiments found early hydrogen breakthrough at low saturations driven by capillary and viscous fingering, which limits pore-space utilization at early times, while repeated injection and withdrawal cycles improve deliverability over time. Technoeconomic factors and purity requirements for end uses are also considered as part of our comprehensive feasibility analysis. Finally, we underscore the importance of geophysical monitoring and tailored injection strategies to maintain integrity and efficiency. Together, these results provide a quantitative foundation for safe, scalable deployment of UHS and highlight priorities for future integrated studies.

08 HYDROGEN↗
DOE OSTI2024

Composition-Dependent Reconstructions of Titanium Oxide Clusters and Cu(111) Support via Cluster-Adatom Interactions

Mass-selected cluster deposition and scanning tunneling microscopy (STM) were used to investigate the surface structure and thermal stability of Ti 3 O y (y = 5, 6) clusters on a Cu(111) surface. STM imaging shows that the substoichiometric Ti 3 O 5 clusters aggregate into large dendritic assemblies at step edges, while the stoichiometric Ti 3 O 6 clusters are highly dispersed as single or small groupings of clusters. Cluster deposition also results in extensive reconstruction of the Cu(111) surface. The Ti 3 O 5 /Cu(111) surface exhibits one Cu-layer deep pits that are ringed by cluster assemblies that nucleate and grow at the perimeter step edges. By comparison, the Ti 3 O 6 /Cu(111) surface consists of irregular step edges and small one Cu-layer islands that are decorated with clusters. The restructuring of the Cu(111) surface is attributed to strong Cu-cluster interactions that release Cu adatoms from the step edges. This mechanism is supported by density functional theory (DFT) calculations, which predict that the Cu adatom attachment to the clusters is energetically favorable. Annealing the surfaces at elevated temperatures (400-700 K) results in higher densities of irregular steps, pits and isolated Cu islands as well as increased cluster aggregation. In conclusion, this work highlights adatom-cluster interactions as another manifestation of strong cluster-support interactions that can significantly alter the nature of the oxide-metal interface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

The Role of Vapor Pressure Deficit in the CLM Simulated Interaction Between Urban Heat Islands and Heat Waves Over CONUS

Abstract Although both urban and rural temperatures are expected to increase under heat waves (HWs), whether the urban heat island (UHI) intensity becomes stronger under HWs remains unknown especially at the daily mean and large spatial scales. Using an urbanized land surface model, we quantify the interactions between UHIs and HWs over the Contiguous United States (CONUS). Synergistic interactions (i.e., increased UHI intensities under HWs) are observed over the eastern and western U.S. However, negative interactions are found in the Central U.S. due to the stronger inhibition of rural evapotranspiration by vapor pressure deficit (VPD) stresses. The interactions between UHIs and HWs in the Central U.S. will be further reduced along with the elevated VPD stresses in a hotter future. The results highlight the importance of properly parameterizing the sensitivity of urban and rural evapotranspiration to various environmental stresses in climate and earth system models.

Wang, Linying [National Key Laboratory of Earth Sy↗
DOE OSTI2025

Improved Representations of Land‐Atmosphere Interactions Over the Continental U.S. Through Dynamic Root Modeling

Previous studies have identified the oversimplified root system representation as a key factor leading to inaccuracies in vegetation‐atmosphere feedbacks. In this study, a dynamic root water uptake scheme in the Noah‐MP land surface model has been coupled to the Weather Research and Forecasting (WRF) model to investigate its impact on the surface hydroclimate variables and land‐atmosphere interactions. To evaluate the impact of the dynamic root, two coupled simulations were conducted, one with the dynamic root water uptake scheme (DynRt) and one with the static root water uptake scheme (StcRt), which is based on the default root representation in Noah‐MP, with slight modifications, primarily in vegetation‐related parameters. Both DynRt and StcRt simulations were conducted with a small ensemble of three members to account for variations in physical parameterizations, initial and boundary forcing and model setup. When compared with reference data sets, the DynRt simulations show improved results than the StcRt simulations, reducing biases in the simulated leaf area index, surface energy fluxes, soil moisture and precipitation. Two different mechanisms through which roots affect land‐atmosphere coupling have been identified. Over the transitional climate zone between the dry and wet climate, the dynamic root scheme affects surface climate and land‐atmosphere coupling mainly through changes in soil moisture through hydraulic redistribution by plant root system. Over the energy‐limited mesic zone, the dynamic root affects regional land‐atmosphere coupling mainly through changes in carbon allocation. This work highlights the importance of dynamic root representation in improving vegetation‐atmosphere simulations by enhancing predictions of water, energy, and carbon fluxes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Optimization and Multimachine Learning Algorithms to Predict Nanometal Surface Area Transfer Parameters for Gold and Silver Nanoparticles

Interactions between gold metallic nanoparticles and molecular dyes have been well described by the nanometal surface energy transfer (NSET) mechanism. However, the expansion and testing of this model for nanoparticles of different metal composition is needed to develop a greater variety of nanosensors for medical and commercial applications. In this study, the NSET formula was slightly modified in the size-dependent dampening constant and skin depth terms to allow for modeling of different metals as well as testing the quenching effects created by variously sized gold, silver, copper, and platinum nanoparticles. Overall, the metal nanoparticles followed more closely the NSET prediction than for Förster resonance energy transfer, though scattering effects began to occur at 20 nm in the nanoparticle diameter. To further improve the NSET theoretical equation, an attempt was made to set a best-fit line of the NSET theoretical equation curve onto the Au and Ag data points. An exhaustive grid search optimizer was applied in the ranges for two variables, 0.1≤C≤2.0 and 0≤α≤4, representing the metal dampening constant and the orientation of donor to the metal surface, respectively. Three different grid searches, starting from coarse (entire range) to finer (narrower range), resulted in more than one million total calculations with values C=2.0 and α=0.0736. The results improved the calculation, but further analysis needed to be conducted in order to find any additional missing physics. With that motivation, two artificial intelligence/machine learning (AI/ML) algorithms, multilayer perception and least absolute shrinkage and selection operator regression, gave a correlation coefficient, R2, greater than 0.97, indicating that the small dataset was not overfitting and was method-independent. This analysis indicates that an investigation is warranted to focus on deeper physics informed machine learning for the NSET equations.

Demers, Steven M. E. (ORCID:0000000192213246)↗
DOE OSTI2025

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing Condensed-Phase Structure and Dynamics in Hierarchical Zeolites and Nanosheets for Catalytic Upgradation of Biomass (Final Report)

Understanding complex reaction pathways in systems governed by multi-scale collective interactions across time and length scales remains a central scientific challenge. This project was guided by the hypothesis that the interplay among oligomers, solvents, and active sites can be tuned by a suitable choice of solvation environment and pore architecture in solid-acid catalysts to direct chemical transformations relevant to biomass conversion. Zeolites and zeolite nanosheets were used as model platforms, allowing for the interaction of macromolecules with the surface of the zeolite nanosheets and with smaller pores that host catalytically active sites. To investigate these coupled phenomena, we employ a multi-scale computational framework that integrates molecular-level descriptions with advanced sampling approaches to capture key physical and chemical interactions. Our work through this project improved fundamental understanding of how reactants and solid-acid catalysts interact in solvent-rich environments, thereby enabling the rational design of catalytic systems that upgrade biomass with enhanced selectivity and energy efficiency. In addition, the project developed advanced sampling methodologies critical for disentangling complex, reactive processes in multi-component catalytic environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interfacial Strength in Hierarchical Carbon Fiber Composites: Interplay of Interphase Modulus and Roughness

A facile, direct deposition approach that exploits van der Waals interactions between carbonaceous materials is utilized to create unidirectional hybrid carbon fiber composites. Two small molecule crosslinkers, a trifunctional aromatic (TL) and a difunctional aliphatic (DL) acyl chloride, are first utilized to create a crosslinked interphase with a softer and stiffer modulus respectively. TL crosslinked interphase with a higher modulus improved the tensile strength by 50%, despite non-covalent linking between fiber and matrix, elucidating the critical role of the interphase in alleviating modulus mismatch between the high modulus carbon fiber and the rubbery matrix. Fractional quantities of carbon nanotubes are additionally dispersed in the small molecule crosslinkers which behaved as a dispersant, helping introduce nanoasperities on the carbon fiber surface. Strong “pi-pi” interactions between CNTs and CF contributed to tensile properties, which are increased by 66% compared to the control. A cohesive zone model suggests that a stiffer interphase is better able to exploit surface heterogeneities and roughness on the fiber, synergistically enhancing interfacial strength.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Energy-conserving contact dynamics of nonspherical rigid-body particles

Understanding the contact dynamics of nonspherical particles is crucial for accurately modeling colloidal and granular systems where shape anisotropy dictates structural organization and transport properties. We here introduce an energy-conserving contact dynamics framework for arbitrary convex rigid-body particles by implementing vertex–boundary interactions in 2D and vertex–surface and edge–edge detection in 3D. The established formulation enables continuous force evaluation and prevents particle overlap while conserving total energy during translational and rotational motion. We demonstrate the framework’s stability and its utility to capture packing behavior, anisotropic diffusion, and equations of state of polygonal and polyhedral particles as examples. The framework establishes a robust and extensible foundation for investigating nonequilibrium dynamics of complex nonspherical particulate systems, enabling enhanced understanding of phenomena across spatiotemporal scales in self- and directed-assembly, granular flows, and hydrodynamics, potentially coupled with interactions that represent underlying physical mechanisms.

Discrete element method↗
DOE OSTI2024

Interactions involved in the adsorption of ethylene glycol and 2-hydroxyethoxide on the Au(111) surface: a Density Functional Theory study

Abstract Context:The monolayers of ethylene glycol and 2-hydroxyethoxide on gold surfaces have been used in hybrid materials as biosensors. In this article, the adsorption of ethylene glycol and 2-hydroxyethoxide on the Au(111) surface was analyzed. For the first system, ethylene glycol on Au(111), there are Au$$\cdot \cdot \cdot $$ · · · O and Au$$\cdot \cdot \cdot $$ · · · H interactions. To the best of our knowledge, the Au$$\cdot \cdot \cdot $$ · · · H interaction has been overlooked until now. However, in this work, there is strong evidence that this interaction is important to stabilize the system. For the second system, the atomic interactions mentioned previously are also predicted, although there is an additional interaction between 2-hydroxyethoxide molecules. Such an interaction induces the link -O-H-O-, with high values of the electron density at the critical points of the corresponding bond path of the O-H interaction. These links suggest the forming of ethylene glycol chains.Methods:The calculations were performed using two exchange-correlation functionals: BEEF-vdW and C09$$_{x}$$ x -vdW; both functionals incorporate dispersion effects within the Kohn-Sham approach in Density Functional Theory as implemented in GPAW code and ASE computational packages. The contacts between the molecules considered in this article and the Au(111) surface were analyzed through the Quantum Theory of Atoms in Molecules implemented in GPUAM code.

Biochemistry & Molecular Biology↗