Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Use of North American and European Air Quality Networks to Evaluate Global Chemistry-Climate Modeling of Surface Ozone

We test the current generation of global chemistry-climate models in their ability to simulate observed, present-day surface ozone. Models are evaluated against hourly surface ozone from 4217 stations in North America and Europe that are averaged over 1 degree by 1 degree grid cells, allowing commensurate model-measurement comparison. Models are generally biased high during all hours of the day and in all regions. Most models simulate the shape of regional summertime diurnal and annual cycles well, correctly matching the timing of hourly (approximately 15:00 local time (LT)) and monthly (mid-June) peak surface ozone abundance. The amplitude of these cycles is less successfully matched. The observed summertime diurnal range (25 ppb) is underestimated in all regions by about 7 parts per billion, and the observed seasonal range (approximately 21 parts per billion) is underestimated by about 5 parts per billion except in the most polluted regions, where it is overestimated by about 5 parts per billion. The models generally match the pattern of the observed summertime ozone enhancement, but they overestimate its magnitude in most regions. Most models capture the observed distribution of extreme episode sizes, correctly showing that about 80 percent of individual extreme events occur in large-scale, multi-day episodes of more than 100 grid cells. The models also match the observed linear relationship between episode size and a measure of episode intensity, which shows increases in ozone abundance by up to 6 parts per billion for larger-sized episodes. We conclude that the skill of the models evaluated here provides confidence in their projections of future surface ozone.

diurnal variations↗
NASA NTRS2009

A Comparison of Surface Acoustic Wave Modeling Methods

Surface Acoustic Wave (SAW) technology is low cost, rugged, lightweight, extremely low power and can be used to develop passive wireless sensors. For these reasons, NASA is investigating the use of SAW technology for Integrated Vehicle Health Monitoring (IVHM) of aerospace structures. To facilitate rapid prototyping of passive SAW sensors for aerospace applications, SAW models have been developed. This paper reports on the comparison of three methods of modeling SAWs. The three models are the Impulse Response Method a first order model, and two second order matrix methods; the conventional matrix approach, and a modified matrix approach that is extended to include internal finger reflections. The second order models are based upon matrices that were originally developed for analyzing microwave circuits using transmission line theory. Results from the models are presented with measured data from devices.

Wilson, W. c.↗
NASA NTRS2000

Coupled Model Simulation of Snowfall Events Over the Black Hills

Although many long-term simulations of snow accumulation and oblation have been made using stand-alone land surface models and surface models coupled with GCMs, less research has focused on short-term event simulations. Actually, accurate event simulations of snow-related processes are the basis for successful long-term simulation. Three advantages of event simulations of snowfall and snow melting are availability of: (1) intensive observation data from field experiments for validation; (2) more physically-realistic precipitation schemes for use in atmospheric models to simulate snowfall; and (3) a more detailed analysis of the snow melting processes. In addition to the complexities of snow related processes themselves, terrain-induced effects on snowfall/snow melting make simulations of snow events more difficult. Climatological observations indicate that terrain features such as the Black Hills of South Dakota and Wyoming can exert important effects on snow accumulation and snow oblation processes. One of the primary effects is that the orography causes forced uplift of airflow and causes atmospheric waves to form both upwind and downwind of it. Airflow often splits around the obstacle, converging on the lee side. This convergence may lead to precipitation enhancement. It also provides an elevated heat and moisture source that enhances atmospheric instability. During the period of April 5-May 5, 1999, the Upper Missouri River Basin Pilot Project (UMRBPP) made intensive observations on precipitation events occurring in the Black Hills. Two moderate snowfall events were captured during the period. The resulting high temporal and spatial resolution data provides opportunities to investigate terrain effects on snowfall amount, distribution, and melting. Successful simulation of snowfall amount, distribution, and evolution using atmospheric models is important to subsequent modeling of snow melting using snow sub-models in land surface schemes. In this paper, a coupled model system, consisting of an atmosphere model (ARPS) and a land-surface model (revised NCAR LSM), is used to simulate one of these UMRBPP cases.

Wang, Jianzhong↗
NASA NTRS1983

Remotely driven model control surfaces for efficient wind-tunnel operations

A remote control system for wind-tunnel model control surfaces was developed during the Space Shuttle program to make more efficient use of wind-tunnel occupancy time and to aid in gathering the large force test data base necessary for the definition of the Shuttle aerodynamic characteristics. A history of the development of the remote system, details of the system and associated equipment, and results from wind-tunnel tests showing the effect of system improvements on experimental data are given. Wind-tunnel test rate and cost comparisons are made between conventional models with bracketed control surfaces and remote models.

Ware, G. M.↗
NASA NTRS1983

Remotely driven model control surfaces for efficient wind-tunnel operations

A remote control system for wind-tunnel model control surfaces was developed during the Space Shuttle program to make more efficient use of wind-tunnel occupancy time and to aid in gathering the large force test data base necessary for the definition of the Shuttle aerodynamic characteristics. This paper presents a history of the development of the remote system, details of the system and associated equipment, and results from wind-tunnel tests showing the effect of system improvements on experimental data. Wind-tunnel test rate and cost comparisons are made between conventional models with bracketed control surfaces and remote models.

Ware, G. M.↗
NASA NTRS1988

Electromagnetic wave scattering at near-grazing incidence from a gently undulating, rough surface

Models to estimate the reflection coefficient of a statistically rough surface, for example the works of Beckmann, Smith, and Vesecky are discussed. Bistatic radar experiments carried out during the Apollo 16 mission provide a data set with which to compare theoretical models and experimental data. These bistatic S-band radar experiments provide experimental estimates of the Moon's bistatic, forward scatter, reflection coefficient for grazing angles of 2.5 to 78 deg. Theoretical expressions for the reflection coefficient are developed for comparison with these experimental data. At grazing angles below 10 deg the models of Smith and Vesecky compare favorably with the data. Beckmann's model falls significantly more rapidly with decreasing grazing angle than does the data.

Vesecky, J. F.↗
NASA NTRS2018

Assessing Version 4 of the SMAP L4_SM Data Product

Version 4 of the SMAP Level 4 Surface and Root Zone Soil Moisture (L4_SM) product benefits from an improved land surface modeling system. Surface soil moisture is typically drier by several volumetric percent in Version 4 compared to Version 3, whereas root zone soil moisture is wetter in Version 4 in some regions and drier in others. Results from core validation site comparisons show that Version 4 of the L4_SM data product meets the accuracy requirement, which is formulated in terms of the RMSE after removal of the long-term mean difference (ubRMSE). The overall ubRMSE of the 3-hourly L4_SM data at the 9 km scale is 0.039 m3 m-3 for surface soil moisture and 0.029 m3 m-3 for root zone soil moisture, below the 0.04 m3 m-3 requirement. L4_SM surface and root zone soil moisture estimates are more skillful than model-only simulation estimates that are not informed by SMAP brightness temperature observations, with statistically significant improvements at the 5% level for surface soil moisture R and anomaly R values. Results from comparisons of the L4_SM product to in situ measurements from more than 400 sparse network sites corroborate the core validation site results.

Reichle, R.↗
NASA NTRS1995

Regional scale hydrology with a new land surface processes model

Through the CaPE Hydrometeorology Project, we have developed an understanding of some of the unique data quality issues involved in assimilating data of disparate types for regional-scale hydrologic modeling within a GIS framework. Among others, the issues addressed here include the development of adequate validation of the surface water budget, implementation of the STATSGO soil data set, and implementation of a remote sensing-derived landcover data set to account for surface heterogeneity. A model of land surface processes has been developed and used in studies of the sensitivity of surface fluxes and runoff to soil and landcover characterization. Results of these experiments have raised many questions about how to treat the scale-dependence of land surface-atmosphere interactions on spatial and temporal variability. In light of these questions, additional modifications are being considered for the Marshall Land Surface Processes Model. It is anticipated that these techniques can be tested and applied in conjunction with GCIP activities over regional scales.

Laymon, Charles↗
NASA NTRS2011

Incorporating JULES into NASA's Land Information System (LIS) and Investigations of Land-Atmosphere Coupling

NASA's Land Information System (LIS; lis.gsfc.nasa.gov) is a flexible land surface modeling and data assimilation framework developed over the past decade with the goal of integrating satellite- and ground-based observational data products and advanced land surface modeling techniques to produce optimal fields of land surface states and fluxes. LIS features a high performance and flexible design, and operates on an ensemble of land surface models for extension over user-specified regional or global domains. The extensible interfaces of LIS allow the incorporation of new domains, land surface models (LSMs), land surface parameters, meteorological inputs, data assimilation and optimization algorithms. In addition, LIS has also been demonstrated for parameter estimation and uncertainty estimation, and has been coupled to the Weather Research and Forecasting (WRF) mesoscale model. A visiting fellowship is currently underway to implement JULES into LIS and to undertake some fundamental science on the feedbacks between the land surface and the atmosphere. An overview of the LIS system, features, and sample results will be presented in an effort to engage the community in the potential advantages of LIS-JULES for a range of applications. Ongoing efforts to develop a framework for diagnosing land-atmosphere coupling will also be presented using the suite of LSM and PBL schemes available in LIS and WRF along with observations from the U. S .. Southern Great Plains. This methodology provides a potential pathway to study factors controlling local land-atmosphere coupling (LoCo) using the LIS-WRF system, which will serve as a testbed for future experiments to evaluate coupling diagnostics within the community.

Santanello, Joseph↗
NASA NTRS1994

Escarpment evolution on high-elevation rifted margins: Insights derived from a surface processes model that combines diffusion, advection and reaction

Experiments with a surface processes model of large-scale (1-1000 km) long-term (1-100 m.y.) erosional denudation are used to establish the controls on the evolution of a model escarpment that is related to the rifting of a continent. The mdoel describes changes in topographic form as a result of sumultaneous short- and long-range mass transport representing hillslope (diffusive) processes and fluvial transport (advection), repsectively. Fluvial entrainment is modeled as a first-order kinetic reaction which reflects the erodibility of the substrate, and therefore the fluvial system is not necessarily carrying at capacity. One dimensional and planform models demonstrate that the principal controls on the evolution of an initially steep model escarpment are (1) antecedent topography/drainage; (2) the timesale (or equivalently a length scale) in the fluvial entrainment reaction; (3) the flexural response of the lithosphere to denudation; and (4) the relative efficiencies of the short- and long-range transport processes. When rainfall and substrate lithology are uniform, a significant amount of discharge draining over the escarpment top causes it to degrade. Only when the top of the model escarpment coincides with a drainage divide can escarpment retreat occur for these conditions. An additional requirement for retreat of a model escarpment without decline is a long reaction time scale for fluvial entrainment. This corresponds to a substrate that is hard to detach by flucial erosion, and therefore to fluvial erosion that is not transport limited. Coninuous backtilting of an escarpment due ot flexural isostatic uplift in response to denudational unloading helps maintain the scarp top as a divide. It is essntial if the escarpment gradient is to be preserved during retreat in a uniform lithology. Low flexural rigidieties propote steep and slowly retreating escarpments. For given rainfall and substrate conditions, the morphology of a retraeating model escarpment is determined by the ratio of hte short-range diffusive and long range advective transport efficiencies. A low ration (which is interpreted to correspond to a more humid, temperate climate) produces a convex upper slope, and concave lower slope morphology and only major escarpments are predicted to preserve a high scarp gradient. Lithological contrasts in hte model produce more complex morphologies and predict the formation of scarps crowned by an erosionaly resistant caprock. However, resistant caprocks are not an essential requirement for model scarps to retreat. We conclude that the inferred controls and model behavior are both consistent with the present-day morphology of rifted continental margins and with modern conceptual models of landscape evolution.

Kooi, Henk↗
NASA NTRS2021

Daily Precipitation Frequency Distributions Impacts on Land-Surface Simulations of CONUS

Many precipitation-driven data products from land data assimilation systems support assessments of droughts, floods, and other societally-relevant land-surface processes.The accumulated precipitation used as input to these products has a significant impacton water budgets; however, the effects of daily distribution of precipitation on theseproducts are not well known. A comparison of the Integrated Multi-satellite Retrievalsfor GPM (IMERG) and Climate Hazards Group InfraRed Precipitation with Stationsversion 2 (CHIRPS2) rainfall products over the continentalUnited States (CONUS) wasperformed to quantify the impacts of the daily distributionof precipitation on biases anderrors in soil moisture, runoff, and evapotranspiration (ET). Since the total accumulatedprecipitation between the IMERG and CHIRPS product differed, a third precipitationproduct, CHIRPS-to-IMERG (CHtoIM), was produced that usedCHIRPS2 accumulatedprecipitation totals and the daily precipitation frequency distribution of IMERG. Thisnew product supported a controlled analysis of the impact ofprecipitation frequencydistribution on simulated hydrological fields. The CHtoIM had higher occurrences ofprecipitation in the 0–5 mm day−1range, with a lower occurrence of dry days, whichdecreased soil moisture and surface runoff in the land-surface model. The surface soillayer had a tendency to reach saturation more often in the CHIRPS2 simulations, wherethe number of moderate to heavy precipitation days (>5mm day−1) was increased. Usingthe blended CHtoIM product as input reduced errors in surface soil moisture by 5–15%when compared to Soil Moisture Active/Passive (SMAP) data.Similarly, ET errors werealso slightly decreased (∼2%) when compared to SSEBop data. Moderate changes indaily precipitation distributions had a quantifiable impact on soil moisture, runoff, andET. These changes usually improved the model when compared to other modeled andobservational datasets, but the magnitude of the improvements varied by region andtime of year.

Daniel P Sarmiento↗
NASA NTRS1994

Automation of reverse engineering process in aircraft modeling and related optimization problems

During the year of 1994, the engineering problems in aircraft modeling were studied. The initial concern was to obtain a surface model with desirable geometric characteristics. Much of the effort during the first half of the year was to find an efficient way of solving a computationally difficult optimization model. Since the smoothing technique in the proposal 'Surface Modeling and Optimization Studies of Aerodynamic Configurations' requires solutions of a sequence of large-scale quadratic programming problems, it is important to design algorithms that can solve each quadratic program in a few interactions. This research led to three papers by Dr. W. Li, which were submitted to SIAM Journal on Optimization and Mathematical Programming. Two of these papers have been accepted for publication. Even though significant progress has been made during this phase of research and computation times was reduced from 30 min. to 2 min. for a sample problem, it was not good enough for on-line processing of digitized data points. After discussion with Dr. Robert E. Smith Jr., it was decided not to enforce shape constraints in order in order to simplify the model. As a consequence, P. Dierckx's nonparametric spline fitting approach was adopted, where one has only one control parameter for the fitting process - the error tolerance. At the same time the surface modeling software developed by Imageware was tested. Research indicated a substantially improved fitting of digitalized data points can be achieved if a proper parameterization of the spline surface is chosen. A winning strategy is to incorporate Dierckx's surface fitting with a natural parameterization for aircraft parts. The report consists of 4 chapters. Chapter 1 provides an overview of reverse engineering related to aircraft modeling and some preliminary findings of the effort in the second half of the year. Chapters 2-4 are the research results by Dr. W. Li on penalty functions and conjugate gradient methods for quadratic programming problems.

Li, W.↗
NASA NTRS1980

Development of an information data base for watershed monitoring

Landsat multispectral scanner data, Defense Mapping Agency digital terrain data, conventional maps, and ground data were integrated to create a comprehensive information data base (the Image Based Information System), to monitor the water quality of the Lake Tahoe Basin. Landsat imagery was used as the planimetric base to which all other data were registered. A georeference image plane, which provided an interface between all data planes for the Lake Tahoe Basin data base, was created from the drainage basin map. The data base was used to extract each drainage basin for separate display. The Defense Mapping Agency-created elevation image was processed with VICAR software to produce a component representing slope magnitude, which was cross-tabulated with the drainage basin georeference table. Future applications of the data base include the development of precipitation modeling, surface runoff models, and classification of drainage basin cover types.

Smith, A. Y.↗
NASA NTRS1987

A review: Quantitative models for lava flows on Mars

The purpose of this abstract is to review and assess the application of quantitative models (Gratz numerical correlation model, radiative loss model, yield stress model, surface structure model, and kinematic wave model) of lava flows on Mars. These theoretical models were applied to Martian flow data to aid in establishing the composition of the lava or to determine other eruption conditions such as eruption rate or duration.

Baloga, S. M.↗
NASA NTRS1994

Atmospheric effects on the mapping of Martian thermal inertia and thermally derived albedo

The most widely used thermal inertia data for Mars assumes the atmospheric contribution is constant and equal to 2 percent of the maximum solar insolation. Haberle and Jakosky investigated the effect of including a dusty CO2 atmosphere and sensible heat exchange with the surface on thermal inertia. We recently utilized Haberle and Jakosky's coupled surface-atmosphere model to investigate the effects of such an atmosphere on the thermally derived albedo. The thermally derived albedo is the albedo which, together with the thermal inertia, provides model surface temperatures which best match the observed temperatures. New maps are presented of thermal inertia and thermally derived albedo which incorporate dust opacities derived from IRTM data.

Hayashi, J. N.↗
NASA NTRS2010

Integration of Advanced Concepts and Vehicles Into the Next Generation Air Transportation System: Introduction, Key Messages, and Vehicle Attributes - Volume 1

Raytheon, in partnership with NASA, is leading the way in ensuring that the future air transportation continues to be a key driver of economic growth and stability and that this system provides an environmentally friendly, safe, and effective means of moving people and goods. A Raytheon-led team of industry and academic experts, under NASA contract NNA08BA47C, looked at the potential issues and impact of introducing four new classes of advanced aircraft into the next generation air transportation system -- known as NextGen. The study will help determine where NASA should further invest in research to support the safe introduction of these new air vehicles. Small uncrewed or unmanned aerial systems (SUAS), super heavy transports (SHT) including hybrid wing body versions (HWB), very light jets (VLJ), and supersonic business jets (SSBJ) are the four classes of aircraft that we studied. Understanding each vehicle's business purpose and strategy is critical to assessing the feasibility of new aircraft operations and their impact on NextGen's architecture. The Raytheon team used scenarios created by aviation experts that depict vehicles in year 2025 operations along with scripts or use cases to understand the issues presented by these new types of vehicles. The information was then mapped into the Joint Planning and Development Office's (JPDO s) Enterprise Architecture to show how the vehicles will fit into NextGen's Concept of Operations. The team also identified significant changes to the JPDO's Integrated Work Plan (IWP) to optimize the NextGen vision for these vehicles. Using a proven enterprise architecture approach and the JPDO s Joint Planning Environment (JPE) web site helped make the leap from architecture to planning efficient, manageable and achievable. Very Light Jets flying into busy hub airports -- Supersonic Business Jets needing to climb and descend rapidly to achieve the necessary altitude Super-heavy cargo planes requiring the shortest common flight path -- are just a few of the potential new operations in the future National Airspace System. To assess the impact of these new scenarios on overall national airspace operations, the Raytheon team used the capabilities of a suite of tools such as NASA's Airspace Concepts Evaluation System (ACES), the Flight Optimization System (FLOPS), FAA's Aviation Environmental Design Tool (AEDT), Intelligent Automations Kinematic Trajectory Generator (KTG) and the Aviation Safety Risk Model (ASRM). Detailed metroplex modeling, surface delay models for super heavy transports, prioritized routing and corridors for supersonics business jets, and VLJ demand models are some of the models developed by the Raytheon team to study the effect of operating these new vehicles in the future NAS. Using this suite of models, several trade studies were conducted to evaluate these effects in terms of delays, equity in access, safety, and the environment. Looking at the impact of each vehicle, a number of critical issues were identified. The Raytheon team concluded that strict compliance to NextGen's 4-dimensional trajectory (4DT) management will be required to accommodate these vehicles unique operations and increased number of flights in the future air space system. The next section provides a discussion of this and the other key findings from our study.

Zellweger, Andres↗
NASA NTRS2014

Optimization of a Radiative Transfer Forward Operator for Simulating SMOS Brightness Temperatures over the Upper Mississippi Basin, USA

The Soil Moisture and Ocean Salinity (SMOS) satellite mission is routinely providing global multi-angular observations of brightness temperature (TB) at both horizontal and vertical polarization with a 3-day repeat period. The assimilation of such data into a land surface model (LSM) may improve the skill of operational flood forecasts through an improved estimation of soil moisture (SM). To accommodate for the direct assimilation of the SMOS TB data, the LSM needs to be coupled with a radiative transfer model (RTM), serving as a forward operator for the simulation of multi-angular and multi-polarization top of atmosphere TBs. This study investigates the use of the Variable Infiltration Capacity (VIC) LSM coupled with the Community Microwave Emission Modelling platform (CMEM) for simulating SMOS TB observations over the Upper Mississippi basin, USA. For a period of 2 years (2010-2011), a comparison between SMOS TBs and simulations with literature-based RTM parameters reveals a basin averaged bias of 30K. Therefore, time series of SMOS TB observations are used to investigate ways for mitigating these large biases. Specifically, the study demonstrates the impact of the LSM soil moisture climatology in the magnitude of TB biases. After CDF matching the SM climatology of the LSM to SMOS retrievals, the average bias decreases from 30K to less than 5K. Further improvements can be made through calibration of RTM parameters related to the modeling of surface roughness and vegetation. Consequently, it can be concluded that SM rescaling and RTM optimization are efficient means for mitigating biases and form a necessary preparatory step for data assimilation.

SMOS↗