SEARCH · Search NASA
Results for “surface stability”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The (111) Surface of NaAu 2 . Structure, Composition, and Stability
The (111) surface of single-crystal NaAu 2 is a model for catalytically active, powdered NaAu 2 . We prepare and characterize this surface with a broad suite of techniques. Preparation in ultrahigh vacuum consists of the traditional approach of ion bombardment (to remove impurities) and thermal annealing (to restore surface order). Both of these steps cause loss of sodium (Na), and repeated treatments eventually trigger conversion of the surface and near-surface regions to crystalline gold. The bulk has a limited ability to repopulate the surface Na. Under conditions where Na depletion is minimized, electron diffraction patterns are consistent with the bulk-terminated structure, and scanning tunneling microscopy reveals mesa-like features with lateral dimensions of a few tens of nanometers. The tops of the mesas do not possess fine structure characteristic of a periodic lattice, suggesting that the surface layer is disordered under the conditions of these experiments.
On the Thermal Stability of Surface-Assembled Viral-Metal Nanoparticle Complexes
Abstract not provided
Surface chemistry dictates stability and oxidation state of supported single metal catalyst atoms
Multi-response maps show that atomically dispersed iron on alumina provides relatively high activity and good stability in low temperature CO oxidation.
Phase equilibrium in argon films stabilized by homogeneous surfaces and thermodynamics of two-stage melting transition
Freezing of gases adsorbed on open surfaces (e.g., graphite) and in narrow pores is a widespread phenomenon which is a subject of a large number of publications. Modeling of the gas/liquid–solid transition is usually accomplished with a molecular simulation technique. However, quantitative analysis of the gas/liquid–solid coexistence and thermodynamic properties of the solid layer still encounters serious difficulties. This is mainly due to the effect of simulation box size on the lattice constant. Since the lattice constant is a function of loading and temperature, once the ordering transition has occurred, the simulation box size must be corrected in the course of simulation according to the Gibbs–Duhem equation. A significant problem is also associated with accurate prediction of the two-dimensional liquid–solid coexistence because of a small difference in densities of coexisting phases. The aim of this study is thermodynamic analysis of the two-dimensional phase coexistence in systems involving crystal-like free of defects layers in narrow slit pores. A special attention was paid to the determination of triple point temperatures. It is shown that intrinsic properties of argon monolayer adsorbed on the graphite surface are similar to those of isolated monolayer accommodated in the slit pore having width of two argon collision diameters. Analysis of the latter system is shown to be clearer and less time-consuming than the former one, which has allowed for explanation of the experimentally observed two-stage melting transition of argon monolayer on graphite without invoking the periodic surface potential modulation and orientational transition.
Design of Ag nanorods for sensitivity and thermal stability of surface-enhanced Raman scattering
Not provided.
Thermal Stability of Nb3Sn Surface Oxide Layer
Explore the source record for details and available documents.
Direct Comparison of the X-Ray Emission and Absorption of Cerium Oxide
Bremstrahlung Isochromat Spectroscopy (BIS). The XES spectra were collected using a Specs electron gun for the excitation and the XES 350 grating monochromator and channel plate system from Scienta as the photon detection. Spectra were collected in 'normal mode,' where the electron gun kinetic energy (KE) and the energy position of the center of the channel plate were both fixed and the energy distribution in the photon (hv) spectrum was derived from the intensities distributed across the channel plate detector in the energy dispersal direction. The polycrystalline Ce sample was oxidized by exposure to air at ambient pressures. After introduction to the ultra-high vacuum system, the oxidized sample was bombarded with Ar, to clean the topmost surface region and stabilize the surface and near surface regions. Although CeO{sub 2} would be the thermodynamically preferred composition in an oxygen rich environment, the combination of a vacuum environment and ion etching may have driven the near surface region into a Ce{sub 2}O{sub 3} stoichiometry. XES data collection occurred with the sample at or near room temperature. The base pressure of the system was 3 x 10{sup -10} torr, but the pressure changed depending the energy and current of the electron gun. For example, with the XES measurements at KE = 3KeV, the pressure was approximately 8 to 9 x 10{sup -10} torr and the excitation current to the sample was typically 0.01 mA. More detail of the sample preparation and analysis can be found in Reference 1. The XAS experiments were performed at Beamline 8 of the Advance Light Source, as part of a larger collaboration. The ex situ sample used at the ALS was prepared in a fashion similar to that described above. X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS), have been used to investigate the photon emission and absorption associated with the Ce3d{sub 5/2} and Ce3d{sub 3/2} core-levels in CeOxide. A comparison of the two processes and their spectra will be made. Recently, we reported the observation of a very strong resonant effect in the Resonant Inverse Photoelectron Spectroscopy of CeOxide. It has now become apparent that there is a utility in a direct comparison of the X-ray Emission Spectroscopy (XES) and X-ray Absorption Spectroscopy (XAS) of similarly prepared CeOxide samples. That comparison is made in this Brief Report/Comment.
Assessment of structures and stabilities of defect clusters and surface energies predicted by nine interatomic potentials for UO2
Explore the source record for details and available documents.
First-principles study of the surface properties of y-LiAlO2: Stability and tritium adsorption
y-LiAlO2 enriched with 6Li isotope exhibits excellent performance under neutron radiation and is used in tritium-producing burnable absorber rods (TPBARs) to produce tritium (T, 3H) in pressurized water reactor (PWR). To better understand the 3H formation and diffusion on the surfaces, the first-principles calculations are performed to study the stability of y-LiAlO2 surface and the 3H adsorption on the surface. By considering all possible symmetrical stoichiometric and nonstoichiometric low-index surfaces, two most stable surfaces, one stoichiometric (100) and one nonstoichiometric (101), were identified. The 3H adsorption and diffusion on the most stable (100) surface were further explored, and the obtained results show that there are four stable sites (three O and one Al atop) for 3H adsorption. The calculated Bader charges of atoms reflect that 3H adsorption on the top of O site is a reduction process, while on the top of Al site is an oxidation one. Under low adsorption coverage of 1/4 per surface unit cell, 3H atoms are adsorbed on the most stable OA atop site. With increasing 3H diffused from bulk to surface, the AlG site is the second choice for 3H adsorption, and then the OB site. The coverage of 2/4 is the most favorable 3H adsorption state due to the counteracted charge transfer. When the coverage is up to 4/4, the interaction between 3H atoms leads to partial formation of T2 molecule that desorbs from surface. Therefore, T2 molecule should be the main product from the perfect surface of y-LiAlO2 at high 3H coverage.
Oxygen surface exchange kinetics and stability of (La,Sr) 2 CoO 4±δ /La 1-x Sr x MO 3-δ (M = Co and Fe) hetero-interfaces at intermediate temperatures
Heterostructured oxide interfaces created by decorating Ruddlesden-Popper phases (A2BO4) or perovskites on perovskites have shown not only pronounced cation segregation at the interface and in the A2BO4 structure but also much enhanced kinetics for oxygen electrocatalysis at elevated temperatures. In this study, we report and compare the time-dependent surface exchange kinetics and stability of (La 0.5 Sr 0.5 ) 2 CoO 4 -decorated (LSC 214 ) La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF 113 ) and La 0.8 Sr 0.2 CoO 3-δ (LSC 113 ) thin films. While LSC 214 decoration on LSC 113 greatly reduced the degradation in the surface exchange kinetics as a function of time relative to LSC 113 , LSCF 113 with LSC 214 coverage showed comparable surface exchange kinetics and stability to LSCF 113 . This difference can be explained by greater surface stability of LSCF 113 than LSC 113 under testing conditions, and that LSC 214 decoration on LSC 113 reduced the decomposition of LSC 113 to form secondary phases that impedes oxygen exchange kinetics, and thus resulted in enhanced stability. This hypothesis is supported by the observations that annealing at 550 °C led to the formation of Sr-rich secondary particles on LSC 113 while no such particles were observed on LSCF 113 . Density functional theory (DFT) computation provides further support, which revealed greater capacity of surface Sr segregation for LSCF 113 having SrO termination than LSC 113 having (La 0.25 Sr 0.75 )O termination for the experimental conditions, and lower energy gain to move Sr from LSCF 113 into LSC 214 relative to the LSC 214 -LSC 113 system.
Activity–stability relationship in the surface electrochemistry of the oxygen evolution reaction
Understanding the functional links between the stability and reactivity of oxide materials during the oxygen evolution reaction (OER) is one key to enabling a vibrant hydrogen economy capable of competing with fossil fuel-based technologies. In this work, by focusing on the surface chemistry of monometallic Ru oxide in acidic and alkaline environments, we found that the kinetics of the OER are almost entirely controlled by the stability of the Ru surface atoms. The same activity–stability relationship was found for more complex, polycrystalline and single-crystalline SrRuO 3 thin films in alkaline solutions. We propose that the electrochemical transformation of either water (acidic solutions) or hydroxyl ions (alkaline solutions) to di-oxygen molecules takes place at defect sites that are inherently present on every electrode surface. During the OER, surface defects are also created by the corrosion of the Ru ions. The dissolution is triggered by the potential-dependent change in the valence state ( n ) of Ru: from stable but inactive Ru 4+ to unstable but active Ru n >4+ . We conclude that if the oxide is stable then it is completely inactive for the OER. As a result, a practical consequence is that the best materials for the OER should balance stability and activity in such a way that the dissolution rate of the oxide is neither too fast nor too slow.
Stability of carbon fiber surface chemistry under temperature and its influence on interfacial adhesion with polymer matrices
The thermal stability of the surface chemistry of a surface treated carbon fiber was investigated by X-ray Photoelectron Spectroscopy. Within a range of temperatures from room temperature to 400 C, the only surface functionalities that decomposed were carboxylic acids and dangling nitrogen containing functionalities like amines, amides or nitriles. Significant amounts of water were desorbed as well. This study enabled the testing of the coherence our the fitting of the C(1s), O(1s) and N(1s) peaks. Particularly, when considering the fitting of in the O(1s) peak, carboxylic acids were shown to be included in a single component peak centered at a binding energy of 532.1 eV. The reaction of the carbon fiber surface and an acrylate resin at high temperature, because of the decomposition of carboxylic acids, was highlighted by Differential Scanning Calorimetry. The thermal history of the composite material during its manufacture appeared to be a major influence on the nature of the interactions generated at the fiber-matrix interface and the resulting mechanical properties.
A Quantitative Examination of Catalyst Component Impacts on Hydrogen Adsorption and Spillover
Hydrogen spillover is a widely recognized but poorly understood surface phenomenon. We coupled volumetric chemisorption with Fourier transform infrared spectroscopy, thermogravimetric analysis, and acid–base titrations to quantify the roles of metal (Pt, Au) and support chemistry (anatase, rutile, P25 titania) on spillover. We show that metal identity has little to no impact on the amount of spillover hydrogen. Spillover pressure dependence is essentially the same on Au/TiO 2 and Pt/TiO 2 , indicating H 2 adsorption is equilibrated across both the metal and support. Conversely, spillover is highly sensitive to support surface chemistry, as rutile TiO 2 stabilizes ∼5× more surface hydrogen than anatase TiO 2 . This change is due to a combination of factors, including the rutile surface’s higher proton affinity, stabilized surface electronic states, and larger surface entropy. This work highlights the utility of Au/MO x catalysts as control materials for spillover, as they enable quantitative evaluation of H 2 adsorption on active metals and spillover onto the support.
Surface Structure, Morphology, and Stability of Li(Ni 1/3 Mn 1/3 Co1/3)O 2 Cathode Material
Layered Li(Ni 1-x-y Mn x Co y )O 2 (NMC) oxides are promising cathode materials capable of addressing some of the challenges associated with next-generation energy storage devices. In particular, improved energy densities, longer cycle-life, and improved safety characteristics with respect to current technologies are needed. However, sufficient knowledge on the atomic-scale processes governing these metrics in working cells is still lacking. Herein, Density Functional Theory (DFT) is employed to predict the stability of several low-index surfaces of Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 (NMC111) as a function of Li and O chemical potentials. Predicted particle shapes are compared with those of single crystal NMCs synthesized under different conditions. The most stable surfaces for stoichiometric NMC111 are predicted to be the non-polar (104), the polar (012) and (001), and the reconstructed, polar (110) surfaces. Results indicate that intermediate spin Co 3+ ions lower the (104) surface energy. Furthermore, it was found that removing oxygen from the (012) surface was easier than from the (104) surface, suggesting a facet dependence on surface-oxygen vacancy formation. In conclusion, these results give important insights into design criteria for the rational control of synthesis parameters as well as establish a foundation on which future, mechanistic studies of NMC surface instabilities can be developed.