Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

High temperature step-flow growth of gallium phosphide by molecular beam epitaxy and metalorganic chemical vapor deposition

Post-growth surface morphologies of high-temperature homoepitaxial GaP films grown by molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD) have been studied. Smooth, stepped surface morphologies of MBE-grown layers, measured by atomic force microscopy, were found for a wide range of substrate temperatures and P{sub 2}:Ga flux ratios. A MOCVD-based growth study performed under similar conditions to MBE-grown samples shows a nearly identical smooth, step-flow surface morphology, presenting a convergence of growth conditions for the two different methods. The additional understanding of GaP epitaxy gained from this study will impact its use in applications that include GaP-based device technologies, III-V metamorphic buffers, and III-V materials integration with silicon.

36 MATERIALS SCIENCE↗

The molecular dynamics of adsorption and dissociation of O{sub 2} on Pt(553)

Molecular adsorption and dissociation of O{sub 2} on the stepped Pt(553) surface have been investigated using supersonic molecular beam techniques and temperature programmed desorption. The initial and coverage-dependent sticking probability was determined with the King and Wells technique for various combinations of incident kinetic energy, surface temperature, incident angle, and surface coverage. A comparison with similar data for Pt(533) and Pt(110)(1 × 2) shows quantitatively the same high step-induced sticking at low incident energies compared to Pt(111). The enhancement is therefore insensitive to the exact arrangement of atoms forming surface corrugation. We consider energy transfer and electronic effects to explain the enhanced sticking. On the other hand, dissociation dynamics at higher incident kinetic energies are strongly dependent on step type. The Pt(553) and Pt(533) surfaces are more reactive than Pt(111), but the (100) step shows higher sticking than the (110) step. We relate this difference to a variation in the effective lowering of the barrier to dissociation from molecularly adsorbed states into atomic states. Our findings are in line with results from experimental desorption studies and theoretical studies of atomic binding energies. We discuss the influence of the different step types on sticking and dissociation dynamics with a one-dimensional potential energy surface.

97 MATHEMATICS AND COMPUTING↗

Fabrication Studies for a Cylindrical DDS Structure at 90 GHz

A natural extension of work on the next generation of high power RF sources and accelerating cavities for Linear Colliders implies cylindrical, damped, detuned structures for millimeter wavelengths. Commercial availability of WR-10 waveguides and other components in the 75-110 GHz range provides a practical goal. Fabrication methods are surveyed, compared and, in some cases, tested to determine whether they can provide the imposed tolerances. Different techniques and tolerances are compared to previous methods at longer wavelengths. The higher gradients and corresponding surface fields indicate that a better understanding of the surface physics is required as well as how the different fabrication steps influence those surface characteristics that impact the final operation. We consider existing systems at SLAC and elsewhere as a function of frequency to determine what is desirable to measure and control for all phases of the fabrication, testing, conditioning and use of these systems. For example, the importance of crystal structure to the different steps is discussed. The preferred method allows a variety of design alternatives to be pursued simultaneously and extends to shorter wavelengths as well as provides possibilities for embedded test and control elements.

43 PARTICLE ACCELERATORS↗

Self-assembly directed one-step synthesis of [4]radialene on Cu(100) surfaces

The synthetic challenges of radialenes have precluded their practical applications. Here, we report a one-step synthetic protocol of [4]radialene on a copper surface. High-resolution scanning tunneling microscopy measurements reveal that such catalytic reaction proceeds readily with high selectivity at the temperature below 120 K. First-principles calculations show that the reaction pathway is characterized by firstly the cooperative inter-molecular hydrogen tautomerization and then the C–C bond formation. The feasibility of such cyclotetramerization reaction can be interpreted by the surface effect of Cu(100), which firstly plays an important role in directing the molecular assembly and then serves as an active catalyst in the hydrogen tautomerization and C–C coupling processes. This work presents not only a novel strategy to the scant number of synthetic methods to produce [4]radialenes via a novel [1 + 1 + 1 + 1] reaction pathway, but also a successful example of C–C bond coupling reactions guided by the surface-induced C–H/π assembly.

36 MATERIALS SCIENCE↗

Platinum/yttrium iron garnet inverted structures for spin current transport

30-80 nm thick yttrium iron garnet (YIG) films are grown by pulsed laser deposition on a 5 nm thick sputtered Pt atop gadolinium gallium garnet substrate (GGG) (110). Upon post-growth rapid thermal annealing, single crystal YIG(110) emerges as if it were epitaxially grown on GGG(110) despite the presence of the intermediate Pt film. The YIG surface shows atomic steps with the root-mean-square roughness of 0.12 nm on flat terraces. Both Pt/YIG and GGG/Pt interfaces are atomically sharp. The resulting YIG(110) films show clear in-plane uniaxial magnetic anisotropy with a well-defined easy axis along 〈001〉 and a peak-to-peak ferromagnetic resonance linewidth of 7.5 Oe at 9.32 GHz, similar to YIG epitaxially grown on GGG. Both spin Hall magnetoresistance and longitudinal spin Seebeck effects in the inverted bilayers indicate excellent Pt/YIG interface quality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of step stiffness and diffusion anisotropy on dynamics of vicinal surfaces: A competing growth process

We re-examine the step meandering instability which is described in term of solutions to the Conserved Kuramoto-Sivashinsky (CKS) equation [Frisch and Verga, Phys. Rev. Lett. 96, 166104 (2006)]. A free-boundary approach is used to exhibit a class of exact solutions that may give a reasonable description of the observed characteristic features of the instability. Different scenarios are found: the characteristic lateral coarsening (i) grows with time like sq root(t) (typical behavior), (ii) disappears, (iii) or does not change for all time (localization in space), depending on the initial transverse meandering amplitude k{sub 0}, or the initial typical height. Those regimes are compared by the numerical simulations presented in the literature. For case (ii) the collapsing time is expressed as an algebraic function of k{sub 0}.

36 MATERIALS SCIENCE↗

XPS and AFM Study of GaAs Surface Treatment

Obtaining smooth and atomically clean surfaces is an important step in the preparation of a surface for device manufacturing. In this work different processes are evaluated for cleaning a GaAs surface. A good surface cleaning treatment is that which provides a high level of uniformity and controllability of the surface. Different techniques are useful as cleaning treatments depending on the growth process to be used. The goal is to remove the oxygen and carbon contaminants and then form a thin oxide film to protect the surface, which is easy to remove later with thermal desorption mechanism like molecular beam epitaxy (MBE) with minimal impact to the surface. In this study, atomic force microscopy (AFM), x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS) were used to characterize the structure of the surface, the composition, as well as detect oxygen and carbon contaminant on the GaAs surface. This study consists in two parts. The first part the surface was subjected to different chemical treatments. The chemical solutions were: (a)H{sub 2}SO{sub 4}:H{sub 2}O{sub 2}:H{sub 2}O(4:1:100), (b) HCl: H{sub 2}O(1:3), (c)NH{sub 4}OH 29%. The treatments (a) and (b) reduced the oxygen on the surface. Treatment (c) reduces carbon contamination. In the second part we made MOS devices on the surfaces treated. They were characterized by CV and IV electrical measurements. They show frequency dispersion.

36 MATERIALS SCIENCE↗

Bulk and surface characterization of In2O3(001) single crystal

A comprehensive bulk and surface investigation of high-quality In2O3(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. ICP-MS measurements reveal small residues of Pb, Mg and Pt in the crystals. Four-point-probe measurements show a resistivity of 2 0.5 105 cm, which translates into a carrier concentration of 1012 cm-3. The results from X-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) from the previously accepted value of 10.117 . Scanning Tunneling Microscopy (STM) images of a reduced (sputtered/annealed) surface show a step height of 5 , which indicates a preference for one type of surface termination. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 height, which corresponds to a strongly distorted indium lattice. Scanning Tunneling Spectroscopy (STS) reveals a pronounced surface state at the Fermi Level (EF). Photoelectron Spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to activated oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV and an upward band bending of ~0.1 eV is observed for the reduced and oxidized surfaces, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface Preparation Techniques for Adhesive Bonding of Aluminum and Copper

Adhesive bonding is a commonly used technique to join different parts or structures. The bonding is attributed surface adhesion. Adhesion is defined by the ASTM as “the state in which two surfaces are held together by interfacial forces which consist of valence force or interlocking action or both.” Both of these are highly dependent on the surface conditions, which makes the surface preparation very critical to the performance of adhesive bonding. Obtaining a strong adhesive bond requires various considerations. Wegman and Levi describe several key steps of adhesive bonding that are summarized here: receiving materials, knowledge of the fabrication process for the parts, mating the parts to be bonded, and surface preparation. Among all these steps, surface preparation is usually the most critical, complex, and frequently neglected step in the bonding sequence. Surface preparation can remove the intermediate surface, paint, rust or oxide layer. Different materials including adherents, adhesives, and chemicals require different surface preparation techniques but in general, the surface preparation needs to consider the cleanliness, roughness, and functionality of the surface. Adhesive bonding techniques specific to Aluminum and Copper are highlighted.

36 MATERIALS SCIENCE↗

Oxidation of stepped Pt(111) studied by x-ray photoelectron spectroscopy and density functional theory

In this comparative density functional theory and x-ray photoelectron spectroscopy study on the interaction of oxygen with stepped Pt(111) surfaces, we show that both the initial adsorption and oxidation occur at the steps rather than terraces. An equivalent behavior was observed for the oxide formation at higher chemical potentials, where, after the formation of a one-dimensional PtO{sub 2}-type oxide at the steps, similar oxide chains form on the (111) terraces, indicating the initial stages of bulk oxide formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron Backscatter Diffraction (EBSD) Characterization of Uranium and Uranium Alloys

Electron backscatter diffraction (EBSD) was used to examine the microstructures of unalloyed uranium, U-6Nb, U-10Mo, and U-0.75Ti. For unalloyed uranium, we used EBSD to examine the effects of various processes on microstructures including casting, rolling and forming, recrystallization, welding, and quasi-static and shock deformation. For U-6Nb we used EBSD to examine the microstructural evolution during shape memory loading. EBSD was used to study chemical homogenization in U-10Mo, and for U-0.75Ti, we used EBSD to study the microstructure and texture evolution during thermal cycling and deformation. The studied uranium alloys have significant microstructural and chemical differences and each of these alloys presents unique preparation challenges. Each of the alloys is prepared by a sequence of mechanical grinding and polishing followed by electropolishing with subtle differences between the alloys. U-6Nb and U-0.75Ti both have martensitic microstructures and both require special care in order to avoid mechanical polishing artifacts. Unalloyed uranium has a tendency to rapidly oxidize when exposed to air and a two-step electropolish is employed, the first step to remove the damaged surface layer resulting from the mechanical preparation and the second step to passivate the surface. All of the alloying additions provide a level of surface passivation and different one and two step electropolishes are employed to create good EBSD surfaces. Because of its low symmetry crystal structure, uranium exhibits complex deformation behavior including operation of multiple deformation twinning modes. EBSD was used to observe and quantify twinning contributions to deformation and to examine the fracture behavior. Figure 1 shows a cross section of two mating fracture surfaces in cast uranium showing the propensity of deformation twinning and intergranular fracture largely between dissimilarly oriented grains. Deformation of U-6Nb in the shape memory regime occurs by the motion of twin boundaries formed during the martensitic transformation. Deformation actually results in a coarsening of the microstructure making EBSD more practical following a limited amount of strain. Figure 2 shows the microstructure resulting from 6% compression. Casting of U-10Mo results in considerable chemical segregation as is apparent in Figure 2a. The segregation subsists through rolling and heat treatment processes as shown in Figure 2b. EBSD was used to study the effects of homogenization time and temperature on chemical heterogeneity. It was found that times and temperatures that result in a chemically homogeneous microstructure also result in a significant increase in grain size. U-0.75Ti forms an acicular martinsite as shown in Figure 4. This microstructure prevails through cycling into the higher temperature solid uranium phases.

36 MATERIALS SCIENCE↗

Molecular-level insights into CO 2 activation on Ni(111) from in situ infrared spectroscopy

The activation of CO 2 on nickel surfaces is the first step of various CO 2 conversion processes. Consequently, understanding the surface intermediates formed during this step and their adsorption sites is crucial for elucidating reaction mechanisms. In this study, we employ in situ infrared spectroscopy to investigate the interaction of 1 mbar CO 2 with a model Ni(111) catalyst between 25°C and 300°C. Under these conditions, CO 2 is activated via a direct dissociation into CO and atomic oxygen, while the oxidation state of the Ni(111) surface is primarily determined by residual H 2 and O 2 . The high surface coverage of CO and oxygen at ambient CO 2 pressure induces a competitive adsorption mechanism on the energetically favored hollow sites. This mechanism leads to a temperature-dependent distribution of CO between top and hollow sites, potentially explaining the effect of reaction conditions on the adsorption site of CO intermediates in CO 2 conversion reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights on finite size effects in ab initio study of CO adsorption and dissociation on Fe 110 surface

Adsorption and dissociation of hydrocarbons on metallic surfaces represent crucial steps on the path to carburization, eventually leading to dusting corrosion. While adsorption of CO molecules on Fe surface is a barrier-less exothermic process, this is not the case for the dissociation of CO into C and O adatoms and the diffusion of C beneath the surface that are found to be associated with large energy barriers. In practice, these barriers can be affected by numerous factors that combine to favour the CO-Fe reaction such as the abundance of CO and other hydrocarbons as well as the presence of structural defects. From a numerical point of view, studying these factors is challenging and a step-by-step approach is necessary to assess, in particular, the influence of the finite box size on the reaction parameters for adsorption and dissociation of CO on metal surfaces. Here, we use density functional theory (DFT) total energy calculations with the climbing-image nudged elastic band method to estimate the adsorption energies and dissociation barriers for different CO coverages with surface supercells of different sizes. We further compute the effect of periodic boundary condition for DFT calculations and find that the contribution from van der Waals interaction in the computation of adsorption parameters is important as they contribute to correcting the finite-size error in small systems. The dissociation process involves carbon insertion into the Fe surface causing a lattice deformation that requires a larger surface system for unrestricted relaxation. We show that, in the larger surface systems associated with dilute CO-coverages, C-insertion is energetically more favourable, leading to a significant decrease in the dissociation barrier. This observation suggests that a large surface system with dilute coverage is necessary for all similar metal-hydrocarbon reactions in order to study their fundamental electronic mechanisms, as an isolated phenomenon, free from finite-size effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Constraints in Semicrystalline Polymers: Using Quasi-isothermal Analysis to Investigate the Mechanisms of Formation and Loss of the Rigid Amorphous Fraction

The nanoscale phase behavior of a semicrystalline polymer is important for mechanical, thermal, optical and other macroscopic properties and can be analyzed well by thermal methods. Using quasi-isothermal (QI) heat capacity measurements, we investigate the formation behavior of the crystalline, mobile amorphous, and rigid amorphous fractions in poly(trimethylene terephthalate), PTT. The crystal and rigid amorphous phases comprise the total solid fraction in PTT at temperatures above T{sub g}, the glass transition temperature of the mobile amorphous fraction. PTT was quasi-isothermally cooled step-wise from the melt which causes its crystalline fraction to be fixed below 451 K. Between the high temperature fulfillment of the T{sub g} step and 451 K, the temperature dependent rigid amorphous fraction (RAF) is completely determined. For PTT, most of the RAF vitrifies between 451 K and T{sub g} step by step during QI cooling after the crystals have formed. The constraints imposed by the crystal surfaces reduce the mobility of the highly entangled polymer chains. We suggest the vitrification of RAF proceeds outward away from the lamellar surfaces in a step by step manner during QI cooling. Upon reheating, devitrification of RAF occurs at a temperature above its previous vitrification temperature, due to the effects of densification brought by physical aging during the long period of quasi-isothermal treatment. Finally, we consider recent concepts related to jamming, which have been suggested to apply to filled polymer systems, and may also be applicable in describing constraints exerted by crystal lamellae upon the RAF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗