Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermodynamic stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Morphological Evolution and Dealloying During Corrosion of Ni20Cr (wt.%) in Molten FLiNaK Salts

The dealloying corrosion behavior of the FCC Ni20Cr (wt%) in molten LiF-NaF-KF (FLiNaK) salts at 600 °C under varying applied potentials was investigated. Using in-operando electrochemical techniques and a multi-modal suite of characterization methods, we connect electrochemical potential, thermodynamic stability, and electro-dissolution kinetics to the corrosion morphologies. Notably, under certain potential regimes, a micron-scale bicontinuous structure, characterized by a network of interconnected pores and ligaments riched with the composition of the more noble (MN) element, becomes prominent. At other potentials both MN and less noble (LN) elements dealloy but at different rates. The dealloying process consists of lattice and grain boundary diffusion of Cr to the metal/salt interface, interphase Cr oxidation, accompanied by surface diffusion of Ni to form interconnected ligaments. At higher potentials, the bicontinuous porous structure undergoes further surface coarsening. Concurrently, Cr(II), Cr(III), and Ni(II) begin to dissolve, with the dissolution of Ni occurring at a significantly slower rate. When solid-state transport of Cr is exceeded by the interfacial rates, dealloying depths are limited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Study of Am electrodeposition from AmCl 3 -LiCl-KCl Molten Salt

In this work, the electrodeposition reaction of Am in AmCl 3 -LiCl-KCl molten salt was studied using voltammetry and chronoamperometry. Electrodeposition of Am was shown to proceed via a two – step reaction scheme, involving the one-electron transfer reduction of Am 3+ to Am 2+ , followed by the two-electron transfer reduction of intermediate Am 2+ to Am 0 . A low Coulombic efficiency of Am deposition was measured despite the Am deposition occurring within the thermodynamic stability window of the supporting LiCl-KCl electrolyte. We hypothesize that the low efficiency is due to out-diffusion of the intermediate Am 2+ species away from the electrode surface. Experimental observations provide evidence of a kinetically – limited electrodeposition reaction, which allows for the loss of intermediate Am 2+ via diffusion leading to Am deposition inefficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Editors’ Choice—Molten Salt Electrolysis in Chloride Melts for Energy-Efficient Iron Metal Production

This study explores chloride molten salt electrolysis (CMSE) as a promising route for energy-efficient iron metal (Fe) production. Moderate temperature (500 °C) LiCl-KCl molten salts offer excellent thermodynamic stability, high ionic conductivity and diffusivity, and high solubility for FeCl 3 , thereby enabling efficient Fe metal extraction at high electrowinning rates. Here, we demonstrate the two essential steps for converting taconite ore into Fe metal. First, Fe 2 O 3 from taconite pellets was selectively leached in HCl yielding a high-purity FeCl 3 aqueous solution, while the gangue components settled at the bottom. Then, anhydrous FeCl 3 was electrolyzed in a LiCl-KCl eutectic molten salt at 500 °C at high current density (1 A cm −2 ) and at high Coulombic efficiency (>85%). Analysis of the electrowon Fe deposits revealed dendritic structures with purity of >99 wt%, which could be further improved to nearly 100 wt% through arc re-melting. CMSE offers low specific energy consumption (3.7 kWhr kg −1 ), competitive with H 2 -DRI and other electrolytic approaches being pursued globally. Our findings underscore the potential of CMSE as an energy-efficient route for electrosynthesis of Fe metal.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Multiscale Simulation Study of the Effects of Nantucket Island on Atmospheric Boundary Layer Flow

Multiscale atmospheric simulations were conducted to investigate how Nantucket Island modifies the marine atmospheric boundary layer (ABL) flow, how the mechanisms responsible are represented in mesoscale versus large-eddy simulation (LES) domains, and potential impacts on wind energy production downstream, in moderate and high wind speed cases. Here, to isolate the effects of the island, each case study was simulated (i) with and without island topography included and (ii) with observed versus spatially uniform sea surface temperature (SST) values, the latter removing the influence of spatial variability in SST, while also enabling the examination of how the island effects vary with near-surface thermodynamic stability over the surrounding ocean. Island effects were found to be strongest during daytime heating, which generates convective rolls that redistribute momentum vertically over the island and downstream. Colder SSTs and weaker winds strengthen these rolls and extend their influence. Flow statistics within a representative wind turbine rotor-swept area downstream show that while vertical momentum redistribution enhances near-surface wind speeds, those aloft decrease, resulting in minimal net change to rotor-equivalent wind speed and slightly reduced vertical shear. Comparisons of mesoscale and LES domains reveal that both capture the roughness-driven near-surface slowdown, but mesoscale models underestimate vertical momentum transport compared to LES, which explicitly resolves convective rolls. Increasing LES resolution beyond the grid spacing required to begin capturing the largest convective roll structures ∼ O(100) m yields minimal additional momentum transport but increases resolved turbulence kinetic energy, relevant for stress loading.

Atmosphere-land interaction↗
DOE OSTI2020

Structure and Dynamics of Domains in Ferroelectric Nanostructures – Phase-Field Modeling (Final Technical Report)

Domain pattern formation is one of the most common phenomena in nature and is a topic of immense interest in many fields ranging from materials science and physics to chemistry and biology. This DOE sponsored research project explored the basic science concerning the thermodynamic stability of mesoscale polarization domain patterns and their temporal evolution mechanisms during formation and subsequent switching in ferroelectric nanostructures and heterostructures. The project employed the computational phase-field method in combination of microelasticity and electrostatic theories. The research was carried out in close collaboration with a number of experimental groups who used High Resolution Transmission Electron Microscopy (HRTEM), in situ TEM with Scanning Probe Microscopy (SPM), or Piezoresponse Force Microscopy (PFM) to characterize the domain structures and dynamics of ferroelectric thin films and heterostructures and who grow high-quality ferroelectric and multiferroic thin films using advanced growth techniques such as Molecular Beam Epitaxy (MBE), Pulsed Laser Deposition (PLLD), and sputtering. The research efforts of the project help establish the phase-field method as the most powerful method for understanding and predicting domain structures in ferroelectric thin films and nanostructures. The findings of the project led to the basic understanding of stability and switching mechanisms of ferroelectric domains under different mechanical boundary conditions and under either homogeneous capacitor configurations or local fields using metallic probes as electrodes and the emergence of charged domain walls during domain switching. The project predicted the spatial length scales, temperature ranges, and electromechanical conditions for different polar states in heterostructures and guided the discovery of both transient and stable novel polarization states containing vortex lattices in oxide superlattices. The project resulted in 134 journal publications and 6 PhD theses with all the PhD graduates currently working in either academia or industry within the United States. The basic understanding on the stability of mesoscale polar states and pattern evolution achieved by the project improved our ability to control and engineer properties of ferroelectric thin films and heterostructures for potential applications in nanoscale electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Creep Property of Intermetallic Dispersive Steels for Nuclear Applications

To meet the materials performance demands of next-generation nuclear and high-temperature energy systems, a new class of intermetallic-dispersive steels (IDS) has been designed through integrated computational thermodynamics and alloy design strategies. The IDS alloys incorporate coherent L1₂ (γ′-Ni₃Al) nanoprecipitates within an Fe–Ni–Cr austenitic matrix, engineered to achieve both high temperature strength and thermodynamic stability while suppressing the formation of detrimental δ-Ni₃Nb and η-Ni₃Ti phases. Initial creep testing of Ti-IDS and TiTa-IDS alloys demonstrates rupture lives comparable to or exceeding those of Inconel 718 and ODS steels, despite being fabricated through conventional ingot metallurgy. Step-load creep tests identified a stress threshold near 300–350 MPa for the onset of tertiary creep, and in-situ neutron diffraction experiments on Ti-IDS revealed clear load partitioning between the matrix and γ′ precipitates: elastic strain is shared by both phases, while plastic strain localizes in the matrix. These results confirm that stable γ′–matrix interfaces play a dominant role in retarding dislocation motion and enhancing creep resistance. In FY26, the program will conduct repeat creep rupture testing of TiTa-IDS at 650 °C/400 MPa, initiate long-term rupture testing of TiNb-IDS, and perform TEM-based microstructural characterization to elucidate dislocation–precipitate interactions and microstructural stability. Collectively, these efforts will establish the mechanistic foundation for next-generation high-temperature structural materials based on the IDS concept.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Machine Learning Vacancy Formation Energy in Nickel-Based Superalloys

Thermal vacancies play a critical role in high-temperature Ni-based superalloys and influence various properties such as creep resistance, oxidation, etc. This study systematically investigates the impact of commonly used transition metals (Cr, Co, Fe), refractory metals (Nb, Ta, Mo, W) and other elements (Al, Cu, Ti, Mn) on the thermodynamic stability of 36 binary, 20 ternary, 11 quaternary, 9 quinary, and 3 senary FCC Ni-based alloys covering various elemental combinations. Density functional theory-based studies on Ni-X binary alloys show that higher concentrations of Cr, Nb, Ta, Al, and Ti introduce significant lattice distortions and broaden the distribution of vacancy formation energies (standard deviation up to 0.15 eV). These elements partially donate electrons, reducing their self-consistent chemical potentials relative to single-element reference values and lowering vacancy formation energies, while Co, Fe, Mo, and W show lower charge localization. These trends extend from 3-6 element alloys, where Cr, Nb, and Ta-rich compositions have low-energy states (~0.5 eV) that increase vacancy concentrations. Finally, graph neural network models are developed to screen over 5000 virtual alloys. Eleven leading compositions are identified with mean vacancy formation energy higher than 1.75 eV and vacancy concentration ~2 orders of magnitude lower than pure Ni at 1000 K. These results provide valuable guidelines to achieve controlled defect engineering in structural alloys.

DFT↗
DOE OSTI2026

Combustion synthesis of nanoscale magnesium borides with improved hydrogen uptake and release

The overarching goal of the reported project was to develop reversible metal hydrides that can be dehydrogenated and recharged at relatively low temperatures and pressures. The project complemented the research on reversible metal hydrides for hydrogen storage conducted by the Hydrogen Materials – Advanced Research Consortium (HyMARC). The students involved were trained at both the University of Texas at El Paso (UTEP) and Sandia National Laboratories (SNL). The research objectives were to fabricate nanoscale magnesium boride powders with different B/Mg atomic ratios and to investigate the effects of B/Mg ratio and particle size on the hydrogenation properties of the obtained materials. Magnesium diboride (MgB 2 ) and tetraboride (MgB 4 ) were synthesized by using combustion synthesis and by heating in a tube furnace. The latter method resulted in materials with significantly reduced impurity levels. An effective method for the removal of magnesium oxide impurities was identified. High-energy ball milling produced submicron MgB 2 and MgB 4 powders. However, hydrogenation experiments at pressures up to 700 bar have not shown any uptake of hydrogen. Thermogravimetric analysis of the decomposition of the obtained MgB 2 and MgB 4 demonstrated higher thermodynamic stability of the latter. Thus, the boron-rich nature and phase stability of magnesium borides with high B/Mg ratios make them poor candidates for direct hydrogenation. However, the synthesized MgB 4 is a promising energetic additive to solid fuels for high-speed air-breathing propulsion as it offers a lower oxidation onset temperature and greater energy density than MgB 2 .

08 HYDROGEN↗
DOE OSTI2020

Using Additives to Control the Decomposition Temperature of Sodium Borohydride

Hydrogen (H 2 ) shows great promise as zero-carbon emission fuel, but there are several challenges to overcome in regards to storage and transportation to make it a more universal energy solution. Gaseous hydrogen requires high pressures and large volume tanks while storage of liquid hydrogen requires cryogenic temperatures; neither option is ideal due to cost and the hazards involved. Storage in the solid state presents an attractive alternative, and can meet the U.S. Department of Energy (DOE) constraints to find materials containing > 7 % H 2 (gravimetric weight) with a maximum H 2 release under 125 °C. While there are many candidate hydrogen storage materials, the vast majority are metal hydrides. Of the hydrides, this review focuses solely on sodium borohydride (NaBH 4 ), which is often not covered in other hydride reviews. However, as it contains 10.6% (by weight) H 2 that can release at 133 ± 3 JK -1 mol -1 , this inexpensive material has received renewed attention. NaBH 4 should decompose to H 2 (g), Na(s), and B(s), and could be recycled into its original form. Unfortunately, metal to ligand charge transfer in NaBH 4 induces high thermodynamic stability, creating a high decomposition temperature of 530 °C. In an effort make H 2 more accessible at lower temperatures, researchers have incorporated additives to destabilize the structure. This review highlights metal additives that have successfully reduced the decomposition temperature of NaBH 4 , with temperatures ranging from 522 °C (titanium (IV) fluoride) to 379 °C (niobium (V) fluoride). We describe synthetic methods employed, chemical pathways taken, and the challenges of boron derivative formation on H 2 cycling. Though no trends can be found across all additives, it is our hope that compiling the data here will enable researchers to gain a better understanding of the additives’ influence and to determine how a new system might be designed to make NaBH 4 a more viable H 2 fuel source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Inductively Coupled Nonthermal Plasma Synthesis of Size-Controlled γ-Al 2 O 3 Nanocrystals

Gamma alumina (γ-Al 2 O 3 ) is widely used as a catalyst and catalytic support due to its high specific surface area and porosity. However, synthesis of γ-Al 2 O 3 nanocrystals is often a complicated process requiring high temperatures or additional post-synthetic steps. Here, we report a single-step synthesis of size-controlled and monodisperse, facetted γ-Al 2 O 3 nanocrystals in an inductively coupled nonthermal plasma reactor using trimethylaluminum and oxygen as precursors. Under optimized conditions, we observed phase-pure, cuboctahedral γ-Al 2 O 3 nanocrystals with defined surface facets. Nuclear magnetic resonance studies revealed that nanocrystal surfaces are populated with AlO 6 , AlO 5 and AlO 4 units with clusters of hydroxyl groups. Nanocrystal size tuning was achieved by varying the total reactor pressure yielding particles as small as 3.5 nm, below the predicted thermodynamic stability limit for γ-Al 2 O 3 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Theoretical Investigation of Delafossite-Cu 2 ZnSnO 4 as a Promising Photovoltaic Absorber

In the quest for efficient and cost-effective photovoltaic absorber materials beyond silicon, considerable attention has been directed toward exploring alternatives. One such material, zincblende-derived Cu2ZnSnS4 (CZTS), has shown promise due to its ideal band gap size and high absorption coefficient. However, challenges such as structural defects and secondary phase formation have hindered its development. In this study, we examine the potential of another compound, Cu2ZnSnO4 (CZTO), with a similar composition to CZTS as a promising alternative. Employing ab initio density function theory (DFT) calculations in combination with an evolutionary structure prediction algorithm, we identify that the crystalline phase of delafossite structure is the most stable among the 900 (meta)stable CZTO. Its thermodynamic stability at room temperature is also confirmed by the molecular dynamics study. Excitingly, this new phase of CZTO displays a direct band gap where the dipole-allowed transition occurs, making it a strong candidate for efficient light absorptions. Furthermore, the estimation of spectroscopic limited maximum efficiency (SLME) directly demonstrates the high potential of delafossite-CZTO as a photovoltaic absorber. Our numerical results suggest that delafossite-CZTO holds promise for future photovoltaic applications.

14 SOLAR ENERGY↗
DOE OSTI2023

Calorimetric Study of Mixed Phosphates Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ) to Evaluate the Electrochemical Trends

Mixed polyanionic compounds have been studied extensively as viable cathode materials for sodium-ion batteries. Mixed phosphates, Na 4 M 3 (PO 4 ) 2 P 2 O 7 (M = Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ ), provide a low barrier for Na-ion diffusion, being advantageous in comparison to phosphates and pyrophosphates. The reported order of sodium extraction is ambiguous and remains unclear. Despite being structurally similar, electrochemical performance differs for all four analogues with different degrees of (de)sodiation, according to the transition element present. High-temperature oxide melt solution calorimetry has been used to establish the relation between thermodynamic phase stability and observed capacity for this series of mixed phosphates. Thermodynamic phase stability largely depends on the kind of structure, type of bonding, and size of the cations present. So, according to our results, the thermodynamic phase stability follows the order Na 4 Mn 3 (PO 4 ) 2 P 2 O 7 > Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 > Na 4 Co 3 (PO 4 ) 2 P 2 O 7 > Na 4 Ni 3 (PO 4 ) 2 P 2 O 7 . The thermodynamic studies serve as guidelines for the selection of compositions with the potential for fabricating advanced cathode materials with maximum performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Novel Thermodynamical Predictor of Tropical High‐Cloud Area Coverage: Estimated Anvil‐Outflow Stability

The stability at the lapse-rate tropopause (LRT) was previously defined as the upper-tropospheric stability (UTS and SUT) but might underestimate the stability control on high-level clouds, since there is little direct connection between convective processes and the thermal stratification at the LRT. Here, a novel estimated anvil-outflow stability (EAS) based on the minimum stability in the upper troposphere is proposed. At the Manus site, the results show that small and large values of the LRT-based UTS and SUT both correspond to strong divergence and frequent occurrence of high-level ice clouds. In contrast, smaller EAS corresponds to stronger convective outflows to produce likely more high-level ice clouds, with a strong negative correlation. In tropics, EAS better explains the geographic distribution of high-level cloud coverage (HCC) and its temporal variations than UTS and SUT. With a strong linear correlation, EAS is likely a simple useful predictor of HCC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Thermodynamics of gallium-stabilized delta-plutonium: A high-temperature drop calorimetry study

Throughout the Cold War (1947–1991), both the United States and the former Soviet Union independently derived a phase diagram for the Pu-Ga system that has different implications on Pu phase stability. In the phase diagram produced by the United States, the Pu δ-phase is thermodynamically stable at room temperatures when Ga content is between 2 and 9 at. %. The diagram produced by the Soviet Union shows the δ-phase undergoing an eutectoid decomposition into the α-Pu + α-Pu 3 Ga at 7.9 at. % Ga and 370 K. This would suggest that Ga-stabilized δ-Pu is metastable with respect to α-Pu + α-Pu 3 Ga at 298 K. To investigate this, and the thermodynamic behavior of Ga in the FCC lattice of δ-Pu, we have utilized high-temperature drop calorimetry to study the enthalpy of formation of two δ-Pu 1−x Ga x compositions. In doing so, mixing models (regular and subregular) were developed to understand the thermodynamic behavior of Ga in the FCC lattice of δ-Pu and found a strong departure from ideal conditions, which suggests Ga ordering in the FCC lattice of δ-Pu. Overall, it was found that δ-Pu 1−x Ga x is enthalpically metastable with respect to α-Pu + Pu 3 Ga at 298 K.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predictions of Boron Phase Stability Using an Efficient Bayesian Machine Learning Interatomic Potential

Thermodynamic phase stability of three elemental boron allotropes, i.e., α-B, β-B, and γ-B, was investigated using a Bayesian interatomic potential trained via a sparse Gaussian process (SGP). SGP potentials trained with datasets from on-the-fly active learning achieve quantum mechanical level accuracy when employed in molecular dynamics simulations to predict wide-ranging thermodynamic, structural, and vibrational properties. The simulated phase diagram (500~1400 K and 0~16 GPa) agrees with experimental measurements. The SGP-based MD simulations also successfully predicted that the B13 defect is critical in stabilizing β-B below 700 K. At higher temperatures, the entropy becomes the dominant factor, making β-B the more stable phase over α-B. Furthermore, this Letter demonstrates that SGP potentials based on a training set consisting of defect-free-only systems could make correct predictions of defect-related phenomena in solid-state crystals, paving the path to investigate crystal phase stability and transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Bromine Incorporation Affects Phase Transformations and Thermal Stability of Lead Halide Perovskites

Mixed-cation and mixed-halide lead halide perovskites show great potential for their application in photovoltaics. Many of the high-performance compositions are made of cesium, formamidinium, lead, iodine, and bromine. However, incorporating bromine in iodine-rich compositions and its effects on the thermal stability of the perovskite structure has not been thoroughly studied. In this work, we study how replacing iodine with bromine in the state-of-the-art Cs 0.17 FA 0.83 PbI 3 perovskite composition leads to different dynamics in the phase transformations as a function of temperature. Through a combination of structural characterization, cathodoluminescence mapping, X-ray photoelectron spectroscopy, and first-principles calculations, we reveal that the incorporation of bromine reduces the thermodynamic phase stability of the films and shifts the products of phase transformations. Our results suggest that bromine-driven vacancy formation during high temperature exposure leads to irreversible transformations into PbI 2 , whereas materials with only iodine go through transformations into hexagonal polytypes, such as the 4H-FAPbI 3 phase. This work sheds light on the structural impacts of adding bromine on thermodynamic phase stability and provides new insights into the importance of understanding the complexity of phase transformations and secondary phases in mixed-cation and mixed-halide systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗